mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
f82a1d1586
Add Device Tree binding documentation for the clocks outputs in the Maxim 77802 Power Management IC. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
45 lines
1.2 KiB
Plaintext
45 lines
1.2 KiB
Plaintext
Binding for Maxim MAX77802 32k clock generator block
|
|
|
|
This is a part of device tree bindings of MAX77802 multi-function device.
|
|
More information can be found in bindings/mfd/max77802.txt file.
|
|
|
|
The MAX77802 contains two 32.768khz clock outputs that can be controlled
|
|
(gated/ungated) over I2C.
|
|
|
|
Following properties should be present in main device node of the MFD chip.
|
|
|
|
Required properties:
|
|
- #clock-cells: From common clock binding; shall be set to 1.
|
|
|
|
Optional properties:
|
|
- clock-output-names: From common clock binding.
|
|
|
|
Each clock is assigned an identifier and client nodes can use this identifier
|
|
to specify the clock which they consume. Following indices are allowed:
|
|
- 0: 32khz_ap clock,
|
|
- 1: 32khz_cp clock.
|
|
|
|
Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h
|
|
header and can be used in device tree sources.
|
|
|
|
Example: Node of the MFD chip
|
|
|
|
max77802: max77802@09 {
|
|
compatible = "maxim,max77802";
|
|
interrupt-parent = <&wakeup_eint>;
|
|
interrupts = <26 0>;
|
|
reg = <0x09>;
|
|
#clock-cells = <1>;
|
|
|
|
/* ... */
|
|
};
|
|
|
|
Example: Clock consumer node
|
|
|
|
foo@0 {
|
|
compatible = "bar,foo";
|
|
/* ... */
|
|
clock-names = "my-clock";
|
|
clocks = <&max77802 MAX77802_CLK_32K_AP>;
|
|
};
|