2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/arch/arm/mach-ixp4xx/common.c
Linus Torvalds dfc25e4503 ARM: SoC: cleanups for 3.15
These cleanup patches are mainly move stuff around and should all
 be harmless. They are mainly split out so that other branches can
 be based on top to avoid conflicts.
 
 Notable changes are:
 
 * We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
   longer used. (Uwe Kleine-König)
 * The Qualcomm MSM platform is split out into legacy mach-msm and
   new-style mach-qcom, to allow easier maintainance of the new
   hardware support without regressions. (Kumar Gala)
 * A rework of some of the Kconfig logic to simplify multiplatform
   support (Rob Herring)
 * Samsung Exynos gets closer to supporting multiplatform (Sachin
   Kamat and others)
 * mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
 * at91 gains some common clock framework support (Alexandre Belloni,
   Jean-Jacques Hiblot and other French people).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yOWCrR//JCVInAQLOPBAAwTMkMrD8S8ggz6vfiQHZNdRPAC7NUJ46
 +eYKmBVi5d6EdnjNuRElWENsh0ZosSAUFHrXsIC2NdH9sAJ9HOqWNNLymuA59Jo9
 HZ/Ze6xQXDPNV7TROPoXuIli/2OCOXyyQHJsfI7h9V3PCx31qo0B5OdCxU0mtXK6
 r1giREhnJFwfQMF/FTdnzhalFJoSjWwv/nkpNmQDJKRLKj9GzwQqItqw68gV6RzU
 Gnt6YK+9xC1B0cfWTFhAm6kbr9i7mvHoMG5tE3no2uuJMn4K7TgeMqOyvPWhmUeB
 EZi656szT1m5VfRWOqG+7coZO2VM4GO4NI0Xfin3GHllugOYls1il/FAfCPMLiwh
 RvuOmQGCkLIpdkuHop5QaI/h1EzlHA59nzTjmGf1+wWPsm0CIg08XOD9izQbRnN9
 EmRqn1/8POIi17xcWyeMp8LB0APsTI+IflZFaYprEY9VlLLA/Pd+7udULhs8Bq8y
 1l6fB6aPZKnDKCBy/PEIR+y+EHFEbwfrx6zm/pxVDX6P5DlQMFWL78pdBoJUa2h8
 3pm/bSzNU5OSz1nJMLJv2jBTtnM5BvFgQBUi2qJ9Lr+nUhJXKCJ80kE/nOlXoCIU
 J952p3OhkYTQQcjuUVQeTXvRUOGB7mKok0pDFZNE6c7faqxTCudMABQq/KbMFstU
 eE3cH5FyYj4=
 =GcBb
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...
2014-04-05 13:51:19 -07:00

673 lines
16 KiB
C

/*
* arch/arm/mach-ixp4xx/common.c
*
* Generic code shared across all IXP4XX platforms
*
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2002 (c) Intel Corporation
* Copyright 2003-2004 (c) MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/time.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/gpio.h>
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/sched_clock.h>
#include <mach/udc.h>
#include <mach/hardware.h>
#include <mach/io.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#define IXP4XX_TIMER_FREQ 66666000
/*
* The timer register doesn't allow to specify the two least significant bits of
* the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
* the best value with the two least significant bits unset.
*/
#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
(IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
(IXP4XX_OST_RELOAD_MASK + 1)
static void __init ixp4xx_clocksource_init(void);
static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
/*************************************************************************
* IXP4xx chipset I/O mapping
*************************************************************************/
static struct map_desc ixp4xx_io_desc[] __initdata = {
{ /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
.virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
.length = IXP4XX_PERIPHERAL_REGION_SIZE,
.type = MT_DEVICE
}, { /* Expansion Bus Config Registers */
.virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
.length = IXP4XX_EXP_CFG_REGION_SIZE,
.type = MT_DEVICE
}, { /* PCI Registers */
.virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
}, { /* Queue Manager */
.virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
.length = IXP4XX_QMGR_REGION_SIZE,
.type = MT_DEVICE
},
};
void __init ixp4xx_map_io(void)
{
iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
}
/*
* GPIO-functions
*/
/*
* The following converted to the real HW bits the gpio_line_config
*/
/* GPIO pin types */
#define IXP4XX_GPIO_OUT 0x1
#define IXP4XX_GPIO_IN 0x2
/* GPIO signal types */
#define IXP4XX_GPIO_LOW 0
#define IXP4XX_GPIO_HIGH 1
/* GPIO Clocks */
#define IXP4XX_GPIO_CLK_0 14
#define IXP4XX_GPIO_CLK_1 15
static void gpio_line_config(u8 line, u32 direction)
{
if (direction == IXP4XX_GPIO_IN)
*IXP4XX_GPIO_GPOER |= (1 << line);
else
*IXP4XX_GPIO_GPOER &= ~(1 << line);
}
static void gpio_line_get(u8 line, int *value)
{
*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
}
static void gpio_line_set(u8 line, int value)
{
if (value == IXP4XX_GPIO_HIGH)
*IXP4XX_GPIO_GPOUTR |= (1 << line);
else if (value == IXP4XX_GPIO_LOW)
*IXP4XX_GPIO_GPOUTR &= ~(1 << line);
}
/*************************************************************************
* IXP4xx chipset IRQ handling
*
* TODO: GPIO IRQs should be marked invalid until the user of the IRQ
* (be it PCI or something else) configures that GPIO line
* as an IRQ.
**************************************************************************/
enum ixp4xx_irq_type {
IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
};
/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
static unsigned long long ixp4xx_irq_edge = 0;
/*
* IRQ -> GPIO mapping table
*/
static signed char irq2gpio[32] = {
-1, -1, -1, -1, -1, -1, 0, 1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, -1, -1,
};
static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
int irq;
for (irq = 0; irq < 32; irq++) {
if (irq2gpio[irq] == gpio)
return irq;
}
return -EINVAL;
}
static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
{
int line = irq2gpio[d->irq];
u32 int_style;
enum ixp4xx_irq_type irq_type;
volatile u32 *int_reg;
/*
* Only for GPIO IRQs
*/
if (line < 0)
return -EINVAL;
switch (type){
case IRQ_TYPE_EDGE_BOTH:
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_RISING:
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_LEVEL_HIGH:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL;
break;
case IRQ_TYPE_LEVEL_LOW:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL;
break;
default:
return -EINVAL;
}
if (irq_type == IXP4XX_IRQ_EDGE)
ixp4xx_irq_edge |= (1 << d->irq);
else
ixp4xx_irq_edge &= ~(1 << d->irq);
if (line >= 8) { /* pins 8-15 */
line -= 8;
int_reg = IXP4XX_GPIO_GPIT2R;
} else { /* pins 0-7 */
int_reg = IXP4XX_GPIO_GPIT1R;
}
/* Clear the style for the appropriate pin */
*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
(line * IXP4XX_GPIO_STYLE_SIZE));
*IXP4XX_GPIO_GPISR = (1 << line);
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
/* Configure the line as an input */
gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN);
return 0;
}
static void ixp4xx_irq_mask(struct irq_data *d)
{
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
*IXP4XX_ICMR2 &= ~(1 << (d->irq - 32));
else
*IXP4XX_ICMR &= ~(1 << d->irq);
}
static void ixp4xx_irq_ack(struct irq_data *d)
{
int line = (d->irq < 32) ? irq2gpio[d->irq] : -1;
if (line >= 0)
*IXP4XX_GPIO_GPISR = (1 << line);
}
/*
* Level triggered interrupts on GPIO lines can only be cleared when the
* interrupt condition disappears.
*/
static void ixp4xx_irq_unmask(struct irq_data *d)
{
if (!(ixp4xx_irq_edge & (1 << d->irq)))
ixp4xx_irq_ack(d);
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
*IXP4XX_ICMR2 |= (1 << (d->irq - 32));
else
*IXP4XX_ICMR |= (1 << d->irq);
}
static struct irq_chip ixp4xx_irq_chip = {
.name = "IXP4xx",
.irq_ack = ixp4xx_irq_ack,
.irq_mask = ixp4xx_irq_mask,
.irq_unmask = ixp4xx_irq_unmask,
.irq_set_type = ixp4xx_set_irq_type,
};
void __init ixp4xx_init_irq(void)
{
int i = 0;
/*
* ixp4xx does not implement the XScale PWRMODE register
* so it must not call cpu_do_idle().
*/
cpu_idle_poll_ctrl(true);
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
/* Disable all interrupt */
*IXP4XX_ICMR = 0x0;
if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
/* Route upper 32 sources to IRQ instead of FIQ */
*IXP4XX_ICLR2 = 0x00;
/* Disable upper 32 interrupts */
*IXP4XX_ICMR2 = 0x00;
}
/* Default to all level triggered */
for(i = 0; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &ixp4xx_irq_chip,
handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
}
/*************************************************************************
* IXP4xx timer tick
* We use OS timer1 on the CPU for the timer tick and the timestamp
* counter as a source of real clock ticks to account for missed jiffies.
*************************************************************************/
static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
/* Clear Pending Interrupt by writing '1' to it */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction ixp4xx_timer_irq = {
.name = "timer1",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = ixp4xx_timer_interrupt,
.dev_id = &clockevent_ixp4xx,
};
void __init ixp4xx_timer_init(void)
{
/* Reset/disable counter */
*IXP4XX_OSRT1 = 0;
/* Clear Pending Interrupt by writing '1' to it */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
/* Reset time-stamp counter */
*IXP4XX_OSTS = 0;
/* Connect the interrupt handler and enable the interrupt */
setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
ixp4xx_clocksource_init();
ixp4xx_clockevent_init();
}
static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
{
memcpy(&ixp4xx_udc_info, info, sizeof *info);
}
static struct resource ixp4xx_udc_resources[] = {
[0] = {
.start = 0xc800b000,
.end = 0xc800bfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IXP4XX_USB,
.end = IRQ_IXP4XX_USB,
.flags = IORESOURCE_IRQ,
},
};
/*
* USB device controller. The IXP4xx uses the same controller as PXA25X,
* so we just use the same device.
*/
static struct platform_device ixp4xx_udc_device = {
.name = "pxa25x-udc",
.id = -1,
.num_resources = 2,
.resource = ixp4xx_udc_resources,
.dev = {
.platform_data = &ixp4xx_udc_info,
},
};
static struct platform_device *ixp4xx_devices[] __initdata = {
&ixp4xx_udc_device,
};
static struct resource ixp46x_i2c_resources[] = {
[0] = {
.start = 0xc8011000,
.end = 0xc801101c,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IXP4XX_I2C,
.end = IRQ_IXP4XX_I2C,
.flags = IORESOURCE_IRQ
}
};
/*
* I2C controller. The IXP46x uses the same block as the IOP3xx, so
* we just use the same device name.
*/
static struct platform_device ixp46x_i2c_controller = {
.name = "IOP3xx-I2C",
.id = 0,
.num_resources = 2,
.resource = ixp46x_i2c_resources
};
static struct platform_device *ixp46x_devices[] __initdata = {
&ixp46x_i2c_controller
};
unsigned long ixp4xx_exp_bus_size;
EXPORT_SYMBOL(ixp4xx_exp_bus_size);
static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
gpio_line_config(gpio, IXP4XX_GPIO_IN);
return 0;
}
static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
int level)
{
gpio_line_set(gpio, level);
gpio_line_config(gpio, IXP4XX_GPIO_OUT);
return 0;
}
static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
int value;
gpio_line_get(gpio, &value);
return value;
}
static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
int value)
{
gpio_line_set(gpio, value);
}
static struct gpio_chip ixp4xx_gpio_chip = {
.label = "IXP4XX_GPIO_CHIP",
.direction_input = ixp4xx_gpio_direction_input,
.direction_output = ixp4xx_gpio_direction_output,
.get = ixp4xx_gpio_get_value,
.set = ixp4xx_gpio_set_value,
.to_irq = ixp4xx_gpio_to_irq,
.base = 0,
.ngpio = 16,
};
void __init ixp4xx_sys_init(void)
{
ixp4xx_exp_bus_size = SZ_16M;
platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
gpiochip_add(&ixp4xx_gpio_chip);
if (cpu_is_ixp46x()) {
int region;
platform_add_devices(ixp46x_devices,
ARRAY_SIZE(ixp46x_devices));
for (region = 0; region < 7; region++) {
if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
ixp4xx_exp_bus_size = SZ_32M;
break;
}
}
}
printk("IXP4xx: Using %luMiB expansion bus window size\n",
ixp4xx_exp_bus_size >> 20);
}
/*
* sched_clock()
*/
static u64 notrace ixp4xx_read_sched_clock(void)
{
return *IXP4XX_OSTS;
}
/*
* clocksource
*/
static cycle_t ixp4xx_clocksource_read(struct clocksource *c)
{
return *IXP4XX_OSTS;
}
unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
ixp4xx_clocksource_read);
}
/*
* clockevents
*/
static int ixp4xx_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
*IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts;
return 0;
}
static void ixp4xx_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
opts = IXP4XX_OST_ENABLE;
break;
case CLOCK_EVT_MODE_ONESHOT:
/* period set by 'set next_event' */
osrt = 0;
opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
break;
case CLOCK_EVT_MODE_SHUTDOWN:
opts &= ~IXP4XX_OST_ENABLE;
break;
case CLOCK_EVT_MODE_RESUME:
opts |= IXP4XX_OST_ENABLE;
break;
case CLOCK_EVT_MODE_UNUSED:
default:
osrt = opts = 0;
break;
}
*IXP4XX_OSRT1 = osrt | opts;
}
static struct clock_event_device clockevent_ixp4xx = {
.name = "ixp4xx timer1",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
.set_mode = ixp4xx_set_mode,
.set_next_event = ixp4xx_set_next_event,
};
static void __init ixp4xx_clockevent_init(void)
{
clockevent_ixp4xx.cpumask = cpumask_of(0);
clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
0xf, 0xfffffffe);
}
void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
{
if (mode == REBOOT_SOFT) {
/* Jump into ROM at address 0 */
soft_restart(0);
} else {
/* Use on-chip reset capability */
/* set the "key" register to enable access to
* "timer" and "enable" registers
*/
*IXP4XX_OSWK = IXP4XX_WDT_KEY;
/* write 0 to the timer register for an immediate reset */
*IXP4XX_OSWT = 0;
*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
}
}
#ifdef CONFIG_PCI
static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
return (dma_addr + size) > SZ_64M;
}
static int ixp4xx_platform_notify_remove(struct device *dev)
{
if (dev_is_pci(dev))
dmabounce_unregister_dev(dev);
return 0;
}
#endif
/*
* Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
*/
static int ixp4xx_platform_notify(struct device *dev)
{
dev->dma_mask = &dev->coherent_dma_mask;
#ifdef CONFIG_PCI
if (dev_is_pci(dev)) {
dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
return 0;
}
#endif
dev->coherent_dma_mask = DMA_BIT_MASK(32);
return 0;
}
int dma_set_coherent_mask(struct device *dev, u64 mask)
{
if (dev_is_pci(dev))
mask &= DMA_BIT_MASK(28); /* 64 MB */
if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
dev->coherent_dma_mask = mask;
return 0;
}
return -EIO; /* device wanted sub-64MB mask */
}
EXPORT_SYMBOL(dma_set_coherent_mask);
#ifdef CONFIG_IXP4XX_INDIRECT_PCI
/*
* In the case of using indirect PCI, we simply return the actual PCI
* address and our read/write implementation use that to drive the
* access registers. If something outside of PCI is ioremap'd, we
* fallback to the default.
*/
static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
unsigned int mtype, void *caller)
{
if (!is_pci_memory(addr))
return __arm_ioremap_caller(addr, size, mtype, caller);
return (void __iomem *)addr;
}
static void ixp4xx_iounmap(void __iomem *addr)
{
if (!is_pci_memory((__force u32)addr))
__iounmap(addr);
}
#endif
void __init ixp4xx_init_early(void)
{
platform_notify = ixp4xx_platform_notify;
#ifdef CONFIG_PCI
platform_notify_remove = ixp4xx_platform_notify_remove;
#endif
#ifdef CONFIG_IXP4XX_INDIRECT_PCI
arch_ioremap_caller = ixp4xx_ioremap_caller;
arch_iounmap = ixp4xx_iounmap;
#endif
}