mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
6a918bade9
Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
437 lines
11 KiB
C
437 lines
11 KiB
C
/*
|
|
* Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
|
|
* JZ4740 SoC NAND controller driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/mach-jz4740/jz4740_nand.h>
|
|
|
|
#define JZ_REG_NAND_CTRL 0x50
|
|
#define JZ_REG_NAND_ECC_CTRL 0x100
|
|
#define JZ_REG_NAND_DATA 0x104
|
|
#define JZ_REG_NAND_PAR0 0x108
|
|
#define JZ_REG_NAND_PAR1 0x10C
|
|
#define JZ_REG_NAND_PAR2 0x110
|
|
#define JZ_REG_NAND_IRQ_STAT 0x114
|
|
#define JZ_REG_NAND_IRQ_CTRL 0x118
|
|
#define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2))
|
|
|
|
#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
|
|
#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
|
|
#define JZ_NAND_ECC_CTRL_RS BIT(2)
|
|
#define JZ_NAND_ECC_CTRL_RESET BIT(1)
|
|
#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
|
|
|
|
#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
|
|
#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
|
|
#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
|
|
#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
|
|
#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
|
|
#define JZ_NAND_STATUS_ERROR BIT(0)
|
|
|
|
#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
|
|
#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
|
|
|
|
#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
|
|
#define JZ_NAND_MEM_CMD_OFFSET 0x08000
|
|
|
|
struct jz_nand {
|
|
struct mtd_info mtd;
|
|
struct nand_chip chip;
|
|
void __iomem *base;
|
|
struct resource *mem;
|
|
|
|
void __iomem *bank_base;
|
|
struct resource *bank_mem;
|
|
|
|
struct jz_nand_platform_data *pdata;
|
|
bool is_reading;
|
|
};
|
|
|
|
static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
|
|
{
|
|
return container_of(mtd, struct jz_nand, mtd);
|
|
}
|
|
|
|
static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
struct nand_chip *chip = mtd->priv;
|
|
uint32_t reg;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
|
|
if (ctrl & NAND_ALE)
|
|
chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET;
|
|
else if (ctrl & NAND_CLE)
|
|
chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET;
|
|
else
|
|
chip->IO_ADDR_W = nand->bank_base;
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_CTRL);
|
|
if (ctrl & NAND_NCE)
|
|
reg |= JZ_NAND_CTRL_ASSERT_CHIP(0);
|
|
else
|
|
reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0);
|
|
writel(reg, nand->base + JZ_REG_NAND_CTRL);
|
|
}
|
|
if (dat != NAND_CMD_NONE)
|
|
writeb(dat, chip->IO_ADDR_W);
|
|
}
|
|
|
|
static int jz_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
return gpio_get_value_cansleep(nand->pdata->busy_gpio);
|
|
}
|
|
|
|
static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
uint32_t reg;
|
|
|
|
writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
reg |= JZ_NAND_ECC_CTRL_RESET;
|
|
reg |= JZ_NAND_ECC_CTRL_ENABLE;
|
|
reg |= JZ_NAND_ECC_CTRL_RS;
|
|
|
|
switch (mode) {
|
|
case NAND_ECC_READ:
|
|
reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
|
|
nand->is_reading = true;
|
|
break;
|
|
case NAND_ECC_WRITE:
|
|
reg |= JZ_NAND_ECC_CTRL_ENCODING;
|
|
nand->is_reading = false;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
}
|
|
|
|
static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat,
|
|
uint8_t *ecc_code)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
uint32_t reg, status;
|
|
int i;
|
|
unsigned int timeout = 1000;
|
|
static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4,
|
|
0x8b, 0xff, 0xb7, 0x6f};
|
|
|
|
if (nand->is_reading)
|
|
return 0;
|
|
|
|
do {
|
|
status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
} while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
|
|
|
|
if (timeout == 0)
|
|
return -1;
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
for (i = 0; i < 9; ++i)
|
|
ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
|
|
|
|
/* If the written data is completly 0xff, we also want to write 0xff as
|
|
* ecc, otherwise we will get in trouble when doing subpage writes. */
|
|
if (memcmp(ecc_code, empty_block_ecc, 9) == 0)
|
|
memset(ecc_code, 0xff, 9);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void jz_nand_correct_data(uint8_t *dat, int index, int mask)
|
|
{
|
|
int offset = index & 0x7;
|
|
uint16_t data;
|
|
|
|
index += (index >> 3);
|
|
|
|
data = dat[index];
|
|
data |= dat[index+1] << 8;
|
|
|
|
mask ^= (data >> offset) & 0x1ff;
|
|
data &= ~(0x1ff << offset);
|
|
data |= (mask << offset);
|
|
|
|
dat[index] = data & 0xff;
|
|
dat[index+1] = (data >> 8) & 0xff;
|
|
}
|
|
|
|
static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
|
|
uint8_t *read_ecc, uint8_t *calc_ecc)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
int i, error_count, index;
|
|
uint32_t reg, status, error;
|
|
uint32_t t;
|
|
unsigned int timeout = 1000;
|
|
|
|
t = read_ecc[0];
|
|
|
|
if (t == 0xff) {
|
|
for (i = 1; i < 9; ++i)
|
|
t &= read_ecc[i];
|
|
|
|
t &= dat[0];
|
|
t &= dat[nand->chip.ecc.size / 2];
|
|
t &= dat[nand->chip.ecc.size - 1];
|
|
|
|
if (t == 0xff) {
|
|
for (i = 1; i < nand->chip.ecc.size - 1; ++i)
|
|
t &= dat[i];
|
|
if (t == 0xff)
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < 9; ++i)
|
|
writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
reg |= JZ_NAND_ECC_CTRL_PAR_READY;
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
do {
|
|
status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
} while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
|
|
|
|
if (timeout == 0)
|
|
return -1;
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
if (status & JZ_NAND_STATUS_ERROR) {
|
|
if (status & JZ_NAND_STATUS_UNCOR_ERROR)
|
|
return -1;
|
|
|
|
error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
|
|
|
|
for (i = 0; i < error_count; ++i) {
|
|
error = readl(nand->base + JZ_REG_NAND_ERR(i));
|
|
index = ((error >> 16) & 0x1ff) - 1;
|
|
if (index >= 0 && index < 512)
|
|
jz_nand_correct_data(dat, index, error & 0x1ff);
|
|
}
|
|
|
|
return error_count;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz_nand_ioremap_resource(struct platform_device *pdev,
|
|
const char *name, struct resource **res, void __iomem **base)
|
|
{
|
|
int ret;
|
|
|
|
*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
|
|
if (!*res) {
|
|
dev_err(&pdev->dev, "Failed to get platform %s memory\n", name);
|
|
ret = -ENXIO;
|
|
goto err;
|
|
}
|
|
|
|
*res = request_mem_region((*res)->start, resource_size(*res),
|
|
pdev->name);
|
|
if (!*res) {
|
|
dev_err(&pdev->dev, "Failed to request %s memory region\n", name);
|
|
ret = -EBUSY;
|
|
goto err;
|
|
}
|
|
|
|
*base = ioremap((*res)->start, resource_size(*res));
|
|
if (!*base) {
|
|
dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name);
|
|
ret = -EBUSY;
|
|
goto err_release_mem;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_release_mem:
|
|
release_mem_region((*res)->start, resource_size(*res));
|
|
err:
|
|
*res = NULL;
|
|
*base = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static int __devinit jz_nand_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct jz_nand *nand;
|
|
struct nand_chip *chip;
|
|
struct mtd_info *mtd;
|
|
struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
|
|
|
|
nand = kzalloc(sizeof(*nand), GFP_KERNEL);
|
|
if (!nand) {
|
|
dev_err(&pdev->dev, "Failed to allocate device structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
|
|
if (ret)
|
|
goto err_free;
|
|
ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem,
|
|
&nand->bank_base);
|
|
if (ret)
|
|
goto err_iounmap_mmio;
|
|
|
|
if (pdata && gpio_is_valid(pdata->busy_gpio)) {
|
|
ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to request busy gpio %d: %d\n",
|
|
pdata->busy_gpio, ret);
|
|
goto err_iounmap_mem;
|
|
}
|
|
}
|
|
|
|
mtd = &nand->mtd;
|
|
chip = &nand->chip;
|
|
mtd->priv = chip;
|
|
mtd->owner = THIS_MODULE;
|
|
mtd->name = "jz4740-nand";
|
|
|
|
chip->ecc.hwctl = jz_nand_hwctl;
|
|
chip->ecc.calculate = jz_nand_calculate_ecc_rs;
|
|
chip->ecc.correct = jz_nand_correct_ecc_rs;
|
|
chip->ecc.mode = NAND_ECC_HW_OOB_FIRST;
|
|
chip->ecc.size = 512;
|
|
chip->ecc.bytes = 9;
|
|
chip->ecc.strength = 2;
|
|
/*
|
|
* FIXME: ecc_strength value of 2 bits per 512 bytes of data is a
|
|
* conservative guess, given 9 ecc bytes and reed-solomon alg.
|
|
*/
|
|
|
|
if (pdata)
|
|
chip->ecc.layout = pdata->ecc_layout;
|
|
|
|
chip->chip_delay = 50;
|
|
chip->cmd_ctrl = jz_nand_cmd_ctrl;
|
|
|
|
if (pdata && gpio_is_valid(pdata->busy_gpio))
|
|
chip->dev_ready = jz_nand_dev_ready;
|
|
|
|
chip->IO_ADDR_R = nand->bank_base;
|
|
chip->IO_ADDR_W = nand->bank_base;
|
|
|
|
nand->pdata = pdata;
|
|
platform_set_drvdata(pdev, nand);
|
|
|
|
writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL);
|
|
|
|
ret = nand_scan_ident(mtd, 1, NULL);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to scan nand\n");
|
|
goto err_gpio_free;
|
|
}
|
|
|
|
if (pdata && pdata->ident_callback) {
|
|
pdata->ident_callback(pdev, chip, &pdata->partitions,
|
|
&pdata->num_partitions);
|
|
}
|
|
|
|
ret = nand_scan_tail(mtd);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to scan nand\n");
|
|
goto err_gpio_free;
|
|
}
|
|
|
|
ret = mtd_device_parse_register(mtd, NULL, NULL,
|
|
pdata ? pdata->partitions : NULL,
|
|
pdata ? pdata->num_partitions : 0);
|
|
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to add mtd device\n");
|
|
goto err_nand_release;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
|
|
|
|
return 0;
|
|
|
|
err_nand_release:
|
|
nand_release(&nand->mtd);
|
|
err_gpio_free:
|
|
platform_set_drvdata(pdev, NULL);
|
|
gpio_free(pdata->busy_gpio);
|
|
err_iounmap_mem:
|
|
iounmap(nand->bank_base);
|
|
err_iounmap_mmio:
|
|
iounmap(nand->base);
|
|
err_free:
|
|
kfree(nand);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit jz_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct jz_nand *nand = platform_get_drvdata(pdev);
|
|
|
|
nand_release(&nand->mtd);
|
|
|
|
/* Deassert and disable all chips */
|
|
writel(0, nand->base + JZ_REG_NAND_CTRL);
|
|
|
|
iounmap(nand->bank_base);
|
|
release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem));
|
|
iounmap(nand->base);
|
|
release_mem_region(nand->mem->start, resource_size(nand->mem));
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(nand);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver jz_nand_driver = {
|
|
.probe = jz_nand_probe,
|
|
.remove = __devexit_p(jz_nand_remove),
|
|
.driver = {
|
|
.name = "jz4740-nand",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(jz_nand_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC");
|
|
MODULE_ALIAS("platform:jz4740-nand");
|