2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/drivers/pwm
Hans de Goede 6a425ecd19 pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices
The _PS0 method for the integrated graphics on some Cherry Trail devices
(observed on a HP Pavilion X2 10-p0XX) turns on the PWM chip (puts it in
D0), causing an inconsistency between the state the pm-core thinks it is
in (left runtime suspended as it was before the suspend/resume) and the
state it actually is in.

Interestingly enough this is done on a device where the pwm controller is
not used for the backlight at all, since it uses an eDP panel. On devices
where the PWM is used this is not a problem since we will resume it
ourselves anyways.

This inconsistency causes us to never suspend the pwm controller again,
which causes the device to not be able to reach S0ix states when suspended.

This commit adds a resume-complete handler, which when we think the device
is still run-time suspended checks the actual power-state and if necessary
updates the rpm-core's internal state.

This fixes the Pavilion X2 10-p0XX not reaching S0ix states when suspended.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-12 12:31:58 +02:00
..
core.c pwm: Silently error out on EPROBE_DEFER 2017-07-06 08:29:16 +02:00
Kconfig pwm: mediatek: Add MT7628 support 2018-08-20 11:36:07 +02:00
Makefile pwm: remove pwm-bfin driver 2018-03-26 15:57:08 +02:00
pwm-ab8500.c pwm: drop owner assignment from platform_drivers 2014-10-20 16:21:28 +02:00
pwm-atmel-hlcdc.c pwm: atmel-hlcdc: Implement the suspend/resume hooks 2017-04-06 17:45:02 +02:00
pwm-atmel-tcb.c pwm: simplify getting .drvdata 2018-04-30 10:40:57 +02:00
pwm-atmel.c pwm: atmel: Enable PWM on sama5d2 2017-04-06 17:45:03 +02:00
pwm-bcm2835.c pwm: bcm2835: Support for polarity setting via DT 2017-08-21 07:27:58 +02:00
pwm-bcm-iproc.c pwm: Add support for Broadcom iProc PWM controller 2016-07-11 12:49:25 +02:00
pwm-bcm-kona.c pwm: Remove .can_sleep from struct pwm_chip 2017-01-04 09:40:54 +01:00
pwm-berlin.c pwm: berlin: Don't use broken prescaler values 2018-07-09 18:57:03 +02:00
pwm-brcmstb.c pwm: Remove .can_sleep from struct pwm_chip 2017-01-04 09:40:54 +01:00
pwm-clps711x.c pwm: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:17 +02:00
pwm-crc.c pwm: Use pwm_get/set_xxx() helpers where appropriate 2016-05-17 14:44:59 +02:00
pwm-cros-ec.c pwm: cros-ec: Switch to SPDX identifier 2018-07-09 19:02:23 +02:00
pwm-ep93xx.c pwm: Add the pwm_is_enabled() helper 2015-07-20 09:46:06 +02:00
pwm-fsl-ftm.c pwm: fsl-ftm: Enable support for the new SoC i.MX8QM 2018-07-09 19:08:26 +02:00
pwm-hibvt.c pwm: hibvt: Explicitly request exclusive reset control 2017-08-21 08:52:40 +02:00
pwm-img.c pwm: img: Add runtime PM 2017-11-15 10:38:37 +01:00
pwm-imx.c pwm: imx: Switch to SPDX identifier 2018-07-09 18:59:14 +02:00
pwm-jz4740.c pwm: jz4740: Add support for devicetree 2018-03-28 00:23:56 +02:00
pwm-lp3943.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
pwm-lpc18xx-sct.c pwm: lpc-18xx: use pwm_set_chip_data 2016-09-08 10:55:05 +02:00
pwm-lpc32xx.c pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value 2016-07-11 12:49:29 +02:00
pwm-lpss-pci.c pwm: lpss: Set enable-bit before waiting for update-bit to go low 2017-04-06 14:48:14 +02:00
pwm-lpss-platform.c pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices 2018-10-12 12:31:58 +02:00
pwm-lpss.c pwm: lpss: Move struct pwm_lpss_chip definition to the header file 2018-10-12 12:31:01 +02:00
pwm-lpss.h pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices 2018-10-12 12:31:58 +02:00
pwm-mediatek.c pwm: mediatek: Add MT7628 support 2018-08-20 11:36:07 +02:00
pwm-meson.c pwm: meson: Fix mux clock names 2018-08-20 11:32:25 +02:00
pwm-mtk-disp.c pwm: Add MediaTek MT2701 display PWM driver support 2016-09-06 10:48:53 +02:00
pwm-mxs.c pwm: mxs: Switch to SPDX identifier 2018-07-12 09:03:06 +02:00
pwm-omap-dmtimer.c pwm: omap-dmtimer: Return -EPROBE_DEFER if no dmtimer platform data 2018-08-20 11:32:19 +02:00
pwm-pca9685.c pwm: pca9685: clarify pca9685_set_sleep_mode() interface. 2017-07-25 13:41:59 +02:00
pwm-puv3.c pwm: puv3: Delete an error message for a failed memory allocation 2018-03-27 23:27:05 +02:00
pwm-pxa.c pwm: constify pwm_ops structures 2017-01-19 00:38:17 +01:00
pwm-rcar.c pwm: simplify getting .drvdata 2018-04-30 10:40:57 +02:00
pwm-renesas-tpu.c pwm: renesas-tpu: Remove support for SH7372 2017-08-18 17:27:14 +02:00
pwm-rockchip.c pwm: rockchip: Add rk3328 support 2017-08-18 17:44:34 +02:00
pwm-samsung.c pwm: pwm-samsung: fix suspend/resume support 2017-08-21 10:39:12 +02:00
pwm-spear.c pwm: drop owner assignment from platform_drivers 2014-10-20 16:21:28 +02:00
pwm-sti.c pwm: Remove .can_sleep from struct pwm_chip 2017-01-04 09:40:54 +01:00
pwm-stm32-lp.c pwm: stm32-lp: Remove useless loop in stm32_pwm_lp_remove() 2018-08-20 11:32:25 +02:00
pwm-stm32.c pwm: Changes for v4.18-rc1 2018-06-14 16:25:43 +09:00
pwm-stmpe.c pwm: stmpe: Fix wrong register offset for hwpwm=2 case 2017-12-05 09:33:05 +01:00
pwm-sun4i.c pwm: sun4i: Simplify controller mapping 2018-03-28 01:12:12 +02:00
pwm-tegra.c pwm: tegra: Remove gratuituous blank line 2018-09-26 16:01:39 +02:00
pwm-tiecap.c pwm: tiecap: Set driver data before runtime PM enable 2017-08-21 08:31:37 +02:00
pwm-tiehrpwm.c pwm: tiehrpwm: Fix disabling of output of PWMs 2018-07-09 18:58:22 +02:00
pwm-tipwmss.c pwm: pwm-tipwmss: Remove all runtime PM gets/puts 2016-09-06 10:48:54 +02:00
pwm-twl-led.c mfd: twl: Move header file out of I2C realm 2017-09-04 14:41:02 +01:00
pwm-twl.c mfd: twl: Move header file out of I2C realm 2017-09-04 14:41:02 +01:00
pwm-vt8500.c pwm: vt8500: Undo preparation of a clock source. 2017-07-25 13:43:28 +02:00
pwm-zx.c pwm: Add ZTE ZX PWM device driver 2017-08-21 08:11:24 +02:00
sysfs.c pwm: sysfs: Use put_device() instead of kfree() 2018-03-28 01:18:53 +02:00