2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
linux-next/arch/arm/mach-s5p64x0/common.c
Linus Torvalds dfc25e4503 ARM: SoC: cleanups for 3.15
These cleanup patches are mainly move stuff around and should all
 be harmless. They are mainly split out so that other branches can
 be based on top to avoid conflicts.
 
 Notable changes are:
 
 * We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
   longer used. (Uwe Kleine-König)
 * The Qualcomm MSM platform is split out into legacy mach-msm and
   new-style mach-qcom, to allow easier maintainance of the new
   hardware support without regressions. (Kumar Gala)
 * A rework of some of the Kconfig logic to simplify multiplatform
   support (Rob Herring)
 * Samsung Exynos gets closer to supporting multiplatform (Sachin
   Kamat and others)
 * mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
 * at91 gains some common clock framework support (Alexandre Belloni,
   Jean-Jacques Hiblot and other French people).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yOWCrR//JCVInAQLOPBAAwTMkMrD8S8ggz6vfiQHZNdRPAC7NUJ46
 +eYKmBVi5d6EdnjNuRElWENsh0ZosSAUFHrXsIC2NdH9sAJ9HOqWNNLymuA59Jo9
 HZ/Ze6xQXDPNV7TROPoXuIli/2OCOXyyQHJsfI7h9V3PCx31qo0B5OdCxU0mtXK6
 r1giREhnJFwfQMF/FTdnzhalFJoSjWwv/nkpNmQDJKRLKj9GzwQqItqw68gV6RzU
 Gnt6YK+9xC1B0cfWTFhAm6kbr9i7mvHoMG5tE3no2uuJMn4K7TgeMqOyvPWhmUeB
 EZi656szT1m5VfRWOqG+7coZO2VM4GO4NI0Xfin3GHllugOYls1il/FAfCPMLiwh
 RvuOmQGCkLIpdkuHop5QaI/h1EzlHA59nzTjmGf1+wWPsm0CIg08XOD9izQbRnN9
 EmRqn1/8POIi17xcWyeMp8LB0APsTI+IflZFaYprEY9VlLLA/Pd+7udULhs8Bq8y
 1l6fB6aPZKnDKCBy/PEIR+y+EHFEbwfrx6zm/pxVDX6P5DlQMFWL78pdBoJUa2h8
 3pm/bSzNU5OSz1nJMLJv2jBTtnM5BvFgQBUi2qJ9Lr+nUhJXKCJ80kE/nOlXoCIU
 J952p3OhkYTQQcjuUVQeTXvRUOGB7mKok0pDFZNE6c7faqxTCudMABQq/KbMFstU
 eE3cH5FyYj4=
 =GcBb
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...
2014-04-05 13:51:19 -07:00

491 lines
11 KiB
C

/*
* Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Common Codes for S5P64X0 machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/reboot.h>
#include <asm/irq.h>
#include <asm/proc-fns.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/map.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/sdhci.h>
#include <plat/adc-core.h>
#include <plat/fb-core.h>
#include <plat/spi-core.h>
#include <plat/gpio-cfg.h>
#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
#include <plat/watchdog-reset.h>
#include "common.h"
static const char name_s5p6440[] = "S5P6440";
static const char name_s5p6450[] = "S5P6450";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = S5P6440_CPU_ID,
.idmask = S5P64XX_CPU_MASK,
.map_io = s5p6440_map_io,
.init_clocks = s5p6440_init_clocks,
.init_uarts = s5p6440_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6440,
}, {
.idcode = S5P6450_CPU_ID,
.idmask = S5P64XX_CPU_MASK,
.map_io = s5p6450_map_io,
.init_clocks = s5p6450_init_clocks,
.init_uarts = s5p6450_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6450,
},
};
/* Initial IO mappings */
static struct map_desc s5p64x0_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_CHIPID,
.pfn = __phys_to_pfn(S5P64X0_PA_CHIPID),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(S5P64X0_PA_SYSCON),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_TIMER,
.pfn = __phys_to_pfn(S5P64X0_PA_TIMER),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_WATCHDOG,
.pfn = __phys_to_pfn(S5P64X0_PA_WDT),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SROMC,
.pfn = __phys_to_pfn(S5P64X0_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_GPIO,
.pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC1,
.pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
},
};
static struct map_desc s5p6440_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static struct map_desc s5p6450_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_UART + SZ_512K,
.pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static void s5p64x0_idle(void)
{
unsigned long val;
val = __raw_readl(S5P64X0_PWR_CFG);
val &= ~(0x3 << 5);
val |= (0x1 << 5);
__raw_writel(val, S5P64X0_PWR_CFG);
cpu_do_idle();
}
static struct samsung_pwm_variant s5p64x0_pwm_variant = {
.bits = 32,
.div_base = 0,
.has_tint_cstat = true,
.tclk_mask = 0,
};
void __init samsung_set_timer_source(unsigned int event, unsigned int source)
{
s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
void __init samsung_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
};
samsung_pwm_clocksource_init(S3C_VA_TIMER,
timer_irqs, &s5p64x0_pwm_variant);
}
/*
* s5p64x0_map_io
*
* register the standard CPU IO areas
*/
void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
{
/* initialize the io descriptors we need for initialization */
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
if (mach_desc)
iotable_init(mach_desc, size);
/* detect cpu id and rev. */
s5p_init_cpu(S5P64X0_SYS_ID);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
samsung_wdt_reset_init(S3C_VA_WATCHDOG);
samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
}
#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
s5p6440_default_sdhci2();
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
}
#endif
#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_map_io(void)
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
s5p6450_default_sdhci2();
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
}
#endif
/*
* s5p64x0_init_clocks
*
* register and setup the CPU clocks
*/
#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
s5p6440_register_clocks();
s5p6440_setup_clocks();
}
#endif
#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
s5p6450_register_clocks();
s5p6450_setup_clocks();
}
#endif
/*
* s5p64x0_init_irq
*
* register the CPU interrupts
*/
#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_init_irq(void)
{
/* S5P6440 supports 2 VIC */
u32 vic[2];
/*
* VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
* VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
*/
vic[0] = 0xff800ae7;
vic[1] = 0xffbf23e5;
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
#endif
#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_init_irq(void)
{
/* S5P6450 supports only 2 VIC */
u32 vic[2];
/*
* VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
* VIC1 is missing IRQ VIC1[12, 14, 23]
*/
vic[0] = 0xff9f1fff;
vic[1] = 0xff7fafff;
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
#endif
struct bus_type s5p64x0_subsys = {
.name = "s5p64x0-core",
.dev_name = "s5p64x0-core",
};
static struct device s5p64x0_dev = {
.bus = &s5p64x0_subsys,
};
static int __init s5p64x0_core_init(void)
{
return subsys_system_register(&s5p64x0_subsys, NULL);
}
core_initcall(s5p64x0_core_init);
int __init s5p64x0_init(void)
{
printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
/* set idle function */
arm_pm_idle = s5p64x0_idle;
return device_register(&s5p64x0_dev);
}
/* uart registration process */
#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
int uart;
for (uart = 0; uart < no; uart++) {
s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
}
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}
#endif
#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}
#endif
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
{
int offs = eint_offset(data->irq);
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
if (offs > 15)
return -EINVAL;
switch (type) {
case IRQ_TYPE_NONE:
printk(KERN_WARNING "No edge setting!\n");
break;
case IRQ_TYPE_EDGE_RISING:
newvalue = S3C2410_EXTINT_RISEEDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
newvalue = S3C2410_EXTINT_FALLEDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
newvalue = S3C2410_EXTINT_BOTHEDGE;
break;
case IRQ_TYPE_LEVEL_LOW:
newvalue = S3C2410_EXTINT_LOWLEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
newvalue = S3C2410_EXTINT_HILEV;
break;
default:
printk(KERN_ERR "No such irq type %d", type);
return -EINVAL;
}
shift = (offs / 2) * 4;
mask = 0x7 << shift;
ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
ctrl |= newvalue << shift;
__raw_writel(ctrl, S5P64X0_EINT0CON0);
/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
if (soc_is_s5p6450())
s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
else
s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
return 0;
}
/*
* s5p64x0_irq_demux_eint
*
* This function demuxes the IRQ from the group0 external interrupts,
* from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
* the specific handlers s5p64x0_irq_demux_eintX_Y.
*/
static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
{
u32 status = __raw_readl(S5P64X0_EINT0PEND);
u32 mask = __raw_readl(S5P64X0_EINT0MASK);
unsigned int irq;
status &= ~mask;
status >>= start;
status &= (1 << (end - start + 1)) - 1;
for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
if (status & 1)
generic_handle_irq(irq);
status >>= 1;
}
}
static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
{
s5p64x0_irq_demux_eint(0, 3);
}
static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
{
s5p64x0_irq_demux_eint(4, 11);
}
static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
struct irq_desc *desc)
{
s5p64x0_irq_demux_eint(12, 15);
}
static int s5p64x0_alloc_gc(void)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
S5P_VA_GPIO, handle_level_irq);
if (!gc) {
printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
"external interrupts failed\n", __func__);
return -EINVAL;
}
ct = gc->chip_types;
ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
ct->chip.irq_set_wake = s3c_irqext_wake;
ct->regs.ack = EINT0PEND_OFFSET;
ct->regs.mask = EINT0MASK_OFFSET;
irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
return 0;
}
static int __init s5p64x0_init_irq_eint(void)
{
int ret = s5p64x0_alloc_gc();
irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
return ret;
}
arch_initcall(s5p64x0_init_irq_eint);
void s5p64x0_restart(enum reboot_mode mode, const char *cmd)
{
if (mode != REBOOT_SOFT)
samsung_wdt_reset();
soft_restart(0);
}