renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Code
6956e2385a
linux-next/drivers/regulator/s2mpa01.c
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1 
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00

420 lines
11 KiB
C
Raw Blame History

/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mpa01.h>
#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
struct s2mpa01_info {
int ramp_delay24;
int ramp_delay3;
int ramp_delay5;
int ramp_delay16;
int ramp_delay7;
int ramp_delay8910;
};
static int get_ramp_delay(int ramp_delay)
{
unsigned char cnt = 0;
ramp_delay /= 6250;
while (true) {
ramp_delay = ramp_delay >> 1;
if (ramp_delay == 0)
break;
cnt++;
}
if (cnt > 3)
cnt = 3;
return cnt;
}
static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
unsigned int ramp_delay = 0;
int old_volt, new_volt;
switch (rdev_get_id(rdev)) {
case S2MPA01_BUCK2:
case S2MPA01_BUCK4:
ramp_delay = s2mpa01->ramp_delay24;
break;
case S2MPA01_BUCK3:
ramp_delay = s2mpa01->ramp_delay3;
break;
case S2MPA01_BUCK5:
ramp_delay = s2mpa01->ramp_delay5;
break;
case S2MPA01_BUCK1:
case S2MPA01_BUCK6:
ramp_delay = s2mpa01->ramp_delay16;
break;
case S2MPA01_BUCK7:
ramp_delay = s2mpa01->ramp_delay7;
break;
case S2MPA01_BUCK8:
case S2MPA01_BUCK9:
case S2MPA01_BUCK10:
ramp_delay = s2mpa01->ramp_delay8910;
break;
}
if (ramp_delay == 0)
ramp_delay = rdev->desc->ramp_delay;
old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
}
static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
unsigned int ramp_enable = 1, enable_shift = 0;
int ret;
switch (rdev_get_id(rdev)) {
case S2MPA01_BUCK1:
enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay16)
s2mpa01->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay16;
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
break;
case S2MPA01_BUCK2:
enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay24)
s2mpa01->ramp_delay24 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay24;
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK3:
enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
s2mpa01->ramp_delay3 = ramp_delay;
ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK4:
enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay24)
s2mpa01->ramp_delay24 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay24;
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK5:
s2mpa01->ramp_delay5 = ramp_delay;
ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
break;
case S2MPA01_BUCK6:
if (ramp_delay > s2mpa01->ramp_delay16)
s2mpa01->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay16;
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
break;
case S2MPA01_BUCK7:
s2mpa01->ramp_delay7 = ramp_delay;
ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
break;
case S2MPA01_BUCK8:
case S2MPA01_BUCK9:
case S2MPA01_BUCK10:
if (ramp_delay > s2mpa01->ramp_delay8910)
s2mpa01->ramp_delay8910 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay8910;
ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
break;
default:
return 0;
}
if (!ramp_enable)
goto ramp_disable;
/* Ramp delay can be enabled/disabled only for buck[1234] */
if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&
rdev_get_id(rdev) <= S2MPA01_BUCK4) {
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
}
ramp_val = get_ramp_delay(ramp_delay);
return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
ramp_val << ramp_shift);
ramp_disable:
return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 0);
}
static struct regulator_ops s2mpa01_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops s2mpa01_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel,
.set_ramp_delay = s2mpa01_set_ramp_delay,
};
#define regulator_desc_ldo(num, step) { \
.name = "LDO"#num, \
.id = S2MPA01_LDO##num, \
.ops = &s2mpa01_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MIN_800_MV, \
.uV_step = step, \
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
.enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck1_4(num) { \
.name = "BUCK"#num, \
.id = S2MPA01_BUCK##num, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MIN_600_MV, \
.uV_step = STEP_6_25_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck5 { \
.name = "BUCK5", \
.id = S2MPA01_BUCK5, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MIN_800_MV, \
.uV_step = STEP_6_25_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B5CTRL2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B5CTRL1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck6_10(num, min, step) { \
.name = "BUCK"#num, \
.id = S2MPA01_BUCK##num, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
static const struct regulator_desc regulators[] = {
regulator_desc_ldo(1, STEP_25_MV),
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
regulator_desc_ldo(4, STEP_50_MV),
regulator_desc_ldo(5, STEP_50_MV),
regulator_desc_ldo(6, STEP_25_MV),
regulator_desc_ldo(7, STEP_50_MV),
regulator_desc_ldo(8, STEP_50_MV),
regulator_desc_ldo(9, STEP_50_MV),
regulator_desc_ldo(10, STEP_50_MV),
regulator_desc_ldo(11, STEP_25_MV),
regulator_desc_ldo(12, STEP_50_MV),
regulator_desc_ldo(13, STEP_50_MV),
regulator_desc_ldo(14, STEP_50_MV),
regulator_desc_ldo(15, STEP_50_MV),
regulator_desc_ldo(16, STEP_50_MV),
regulator_desc_ldo(17, STEP_50_MV),
regulator_desc_ldo(18, STEP_50_MV),
regulator_desc_ldo(19, STEP_50_MV),
regulator_desc_ldo(20, STEP_50_MV),
regulator_desc_ldo(21, STEP_50_MV),
regulator_desc_ldo(22, STEP_25_MV),
regulator_desc_ldo(23, STEP_25_MV),
regulator_desc_ldo(24, STEP_50_MV),
regulator_desc_ldo(25, STEP_50_MV),
regulator_desc_ldo(26, STEP_50_MV),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),
regulator_desc_buck1_4(4),
regulator_desc_buck5,
regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
};
static int s2mpa01_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { };
struct device_node *reg_np = NULL;
struct regulator_config config = { };
struct s2mpa01_info *s2mpa01;
int i;
s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
if (!s2mpa01)
return -ENOMEM;
for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
rdata[i].name = regulators[i].name;
if (iodev->dev->of_node) {
reg_np = of_get_child_by_name(iodev->dev->of_node,
"regulators");
if (!reg_np) {
dev_err(&pdev->dev,
"could not find regulators sub-node\n");
return -EINVAL;
}
of_regulator_match(&pdev->dev, reg_np, rdata,
S2MPA01_REGULATOR_MAX);
of_node_put(reg_np);
}
platform_set_drvdata(pdev, s2mpa01);
config.dev = &pdev->dev;
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mpa01;
for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
struct regulator_dev *rdev;
if (pdata)
config.init_data = pdata->regulators[i].initdata;
else
config.init_data = rdata[i].init_data;
if (reg_np)
config.of_node = rdata[i].of_node;
rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "regulator init failed for %d\n",
i);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id s2mpa01_pmic_id[] = {
{ "s2mpa01-pmic", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
static struct platform_driver s2mpa01_pmic_driver = {
.driver = {
.name = "s2mpa01-pmic",
},
.probe = s2mpa01_pmic_probe,
.id_table = s2mpa01_pmic_id,
};
module_platform_driver(s2mpa01_pmic_driver);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink