2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
Gregory CLEMENT d58a2ea5cb mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
The SDHCI unit used on the Armada 38x needs using an extra register to
do specific clock adjustments in order to support the SDR50 and DDR50
modes. This patch extends the binding to allow using this register.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-29 13:08:22 +01:00

51 lines
1.5 KiB
Plaintext

* Marvell sdhci-pxa v2/v3 controller
This file documents differences between the core properties in mmc.txt
and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
Required properties:
- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
"marvell,armada-380-sdhci".
- reg:
* for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
the SDHCI registers.
* for "marvell,armada-380-sdhci", three register areas. The first
one for the SDHCI registers themselves, the second one for the
AXI/Mbus bridge registers of the SDHCI unit, the third one for the
SDIO3 Configuration register
- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
for "marvell,armada-380-sdhci"
- clocks: Array of clocks required for SDHCI; requires at least one for
I/O clock.
- clock-names: Array of names corresponding to clocks property; shall be
"io" for I/O clock and "core" for optional core clock.
Optional properties:
- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
Example:
sdhci@d4280800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xd4280800 0x800>;
bus-width = <8>;
interrupts = <27>;
clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
clock-names = "io", "core";
non-removable;
mrvl,clk-delay-cycles = <31>;
};
sdhci@d8000 {
compatible = "marvell,armada-380-sdhci";
reg-names = "sdhci", "mbus", "conf-sdio3";
reg = <0xd8000 0x1000>,
<0xdc000 0x100>;
<0x18454 0x4>;
interrupts = <0 25 0x4>;
clocks = <&gateclk 17>;
clock-names = "io";
mrvl,clk-delay-cycles = <0x1F>;
};