2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
Carlo Caione 12545fa33a clk: meson: Document bindings for Meson8b clock controller
Add documentation for  the clock controller.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-05 17:22:09 -07:00

41 lines
1.1 KiB
Plaintext

* Amlogic Meson8b Clock and Reset Unit
The Amlogic Meson8b clock controller generates and supplies clock to various
controllers within the SoC.
Required Properties:
- compatible: should be "amlogic,meson8b-clkc"
- reg: it must be composed by two tuples:
0) physical base address of the xtal register and length of memory
mapped region.
1) physical base address of the clock controller and length of memory
mapped region.
- #clock-cells: should be 1.
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
used in device tree sources.
Example: Clock controller node:
clkc: clock-controller@c1104000 {
#clock-cells = <1>;
compatible = "amlogic,meson8b-clkc";
reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
};
Example: UART controller node that consumes the clock generated by the clock
controller:
uart_AO: serial@c81004c0 {
compatible = "amlogic,meson-uart";
reg = <0xc81004c0 0x14>;
interrupts = <0 90 1>;
clocks = <&clkc CLKID_CLK81>;
status = "disabled";
};