2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/arch/arm/mach-pxa/am300epd.c
Jaya Kumar c1c341a060 broadsheetfb: add multiple panel type support
Update broadsheetfb to add support for multiple panel types.  The 3.7" and
6" are known to work but the 9.7" is untested due to lack of hardware.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:32 -08:00

296 lines
6.4 KiB
C

/*
* am300epd.c -- Platform device for AM300 EPD kit
*
* Copyright (C) 2008, Jaya Kumar
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
* This work was made possible by help and equipment support from E-Ink
* Corporation. http://support.eink.com/community
*
* This driver is written to be used with the Broadsheet display controller.
* on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
* Vizplex EPD on a Gumstix board using the Broadsheet interface board.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxafb.h>
#include "generic.h"
#include <video/broadsheetfb.h>
static unsigned int panel_type = 6;
static struct platform_device *am300_device;
static struct broadsheet_board am300_board;
static unsigned long am300_pin_config[] __initdata = {
GPIO16_GPIO,
GPIO17_GPIO,
GPIO32_GPIO,
GPIO48_GPIO,
GPIO49_GPIO,
GPIO51_GPIO,
GPIO74_GPIO,
GPIO75_GPIO,
GPIO76_GPIO,
GPIO77_GPIO,
/* this is the 16-bit hdb bus 58-73 */
GPIO58_GPIO,
GPIO59_GPIO,
GPIO60_GPIO,
GPIO61_GPIO,
GPIO62_GPIO,
GPIO63_GPIO,
GPIO64_GPIO,
GPIO65_GPIO,
GPIO66_GPIO,
GPIO67_GPIO,
GPIO68_GPIO,
GPIO69_GPIO,
GPIO70_GPIO,
GPIO71_GPIO,
GPIO72_GPIO,
GPIO73_GPIO,
};
/* register offsets for gpio control */
#define PWR_GPIO_PIN 16
#define CFG_GPIO_PIN 17
#define RDY_GPIO_PIN 32
#define DC_GPIO_PIN 48
#define RST_GPIO_PIN 49
#define LED_GPIO_PIN 51
#define RD_GPIO_PIN 74
#define WR_GPIO_PIN 75
#define CS_GPIO_PIN 76
#define IRQ_GPIO_PIN 77
/* hdb bus */
#define DB0_GPIO_PIN 58
#define DB15_GPIO_PIN 73
static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
IRQ_GPIO_PIN, LED_GPIO_PIN };
static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
"CS", "IRQ", "LED" };
static int am300_wait_event(struct broadsheetfb_par *par)
{
/* todo: improve err recovery */
wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
return 0;
}
static int am300_init_gpio_regs(struct broadsheetfb_par *par)
{
int i;
int err;
char dbname[8];
for (i = 0; i < ARRAY_SIZE(gpios); i++) {
err = gpio_request(gpios[i], gpio_names[i]);
if (err) {
dev_err(&am300_device->dev, "failed requesting "
"gpio %s, err=%d\n", gpio_names[i], err);
goto err_req_gpio;
}
}
/* we also need to take care of the hdb bus */
for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
sprintf(dbname, "DB%d", i);
err = gpio_request(i, dbname);
if (err) {
dev_err(&am300_device->dev, "failed requesting "
"gpio %d, err=%d\n", i, err);
while (i >= DB0_GPIO_PIN)
gpio_free(i--);
i = ARRAY_SIZE(gpios) - 1;
goto err_req_gpio;
}
}
/* setup the outputs and init values */
gpio_direction_output(PWR_GPIO_PIN, 0);
gpio_direction_output(CFG_GPIO_PIN, 1);
gpio_direction_output(DC_GPIO_PIN, 0);
gpio_direction_output(RD_GPIO_PIN, 1);
gpio_direction_output(WR_GPIO_PIN, 1);
gpio_direction_output(CS_GPIO_PIN, 1);
gpio_direction_output(RST_GPIO_PIN, 0);
/* setup the inputs */
gpio_direction_input(RDY_GPIO_PIN);
gpio_direction_input(IRQ_GPIO_PIN);
/* start the hdb bus as an input */
for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
gpio_direction_output(i, 0);
/* go into command mode */
gpio_set_value(CFG_GPIO_PIN, 1);
gpio_set_value(RST_GPIO_PIN, 0);
msleep(10);
gpio_set_value(RST_GPIO_PIN, 1);
msleep(10);
am300_wait_event(par);
return 0;
err_req_gpio:
while (i > 0)
gpio_free(gpios[i--]);
return err;
}
static int am300_init_board(struct broadsheetfb_par *par)
{
return am300_init_gpio_regs(par);
}
static void am300_cleanup(struct broadsheetfb_par *par)
{
int i;
free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
for (i = 0; i < ARRAY_SIZE(gpios); i++)
gpio_free(gpios[i]);
for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
gpio_free(i);
}
static u16 am300_get_hdb(struct broadsheetfb_par *par)
{
u16 res = 0;
int i;
for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
return res;
}
static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
{
int i;
for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
}
static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
u8 state)
{
switch (bit) {
case BS_CS:
gpio_set_value(CS_GPIO_PIN, state);
break;
case BS_DC:
gpio_set_value(DC_GPIO_PIN, state);
break;
case BS_WR:
gpio_set_value(WR_GPIO_PIN, state);
break;
}
}
static int am300_get_panel_type(void)
{
return panel_type;
}
static irqreturn_t am300_handle_irq(int irq, void *dev_id)
{
struct broadsheetfb_par *par = dev_id;
wake_up(&par->waitq);
return IRQ_HANDLED;
}
static int am300_setup_irq(struct fb_info *info)
{
int ret;
struct broadsheetfb_par *par = info->par;
ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
IRQF_DISABLED|IRQF_TRIGGER_RISING,
"AM300", par);
if (ret)
dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
return ret;
}
static struct broadsheet_board am300_board = {
.owner = THIS_MODULE,
.init = am300_init_board,
.cleanup = am300_cleanup,
.set_hdb = am300_set_hdb,
.get_hdb = am300_get_hdb,
.set_ctl = am300_set_ctl,
.wait_for_rdy = am300_wait_event,
.get_panel_type = am300_get_panel_type,
.setup_irq = am300_setup_irq,
};
int __init am300_init(void)
{
int ret;
pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
/* request our platform independent driver */
request_module("broadsheetfb");
am300_device = platform_device_alloc("broadsheetfb", -1);
if (!am300_device)
return -ENOMEM;
/* the am300_board that will be seen by broadsheetfb is a copy */
platform_device_add_data(am300_device, &am300_board,
sizeof(am300_board));
ret = platform_device_add(am300_device);
if (ret) {
platform_device_put(am300_device);
return ret;
}
return 0;
}
module_param(panel_type, uint, 0);
MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
MODULE_DESCRIPTION("board driver for am300 epd kit");
MODULE_AUTHOR("Jaya Kumar");
MODULE_LICENSE("GPL");