mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
d2d2e54d66
Instead of using enum for clock ID, let's switch imx6qdl clock driver to use macro. In this case, device tree can reuse these macros to improve readability. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
32 lines
889 B
Plaintext
32 lines
889 B
Plaintext
* Clock bindings for Freescale i.MX6 Quad
|
|
|
|
Required properties:
|
|
- compatible: Should be "fsl,imx6q-ccm"
|
|
- reg: Address and length of the register set
|
|
- interrupts: Should contain CCM interrupt
|
|
- #clock-cells: Should be <1>
|
|
|
|
The clock consumer should specify the desired clock by having the clock
|
|
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
|
|
for the full list of i.MX6 Quad and DualLite clock IDs.
|
|
|
|
Examples:
|
|
|
|
#include <dt-bindings/clock/imx6qdl-clock.h>
|
|
|
|
clks: ccm@020c4000 {
|
|
compatible = "fsl,imx6q-ccm";
|
|
reg = <0x020c4000 0x4000>;
|
|
interrupts = <0 87 0x04 0 88 0x04>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
uart1: serial@02020000 {
|
|
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
|
|
reg = <0x02020000 0x4000>;
|
|
interrupts = <0 26 0x04>;
|
|
clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|