Andreas Klinger dee2dabc0e iio: bmp280: fix compensation of humidity ... Limit the output of humidity compensation to the range between 0 and 100 percent. Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity. Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3. Although this clamp is documented, it was never in the driver of the kernel. It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2020-05-11 20:19:19 +01:00
..
abp060mg.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157	2019-05-30 11:26:37 -07:00
bmp280-core.c	iio: bmp280: fix compensation of humidity	2020-05-11 20:19:19 +01:00
bmp280-i2c.c	iio: pressure: bmp280: Allow device to be enumerated from ACPI	2019-12-29 15:20:10 +00:00
bmp280-regmap.c	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
bmp280-spi.c	iio: pressure: bmp280: use devm action and remove labels from probe	2019-10-22 11:10:23 +01:00
bmp280.h	iio: pressure: bmp280: use devm action and remove labels from probe	2019-10-22 11:10:23 +01:00
cros_ec_baro.c	iio: cros_ec: Expose hwfifo_timeout	2020-03-28 22:04:33 +01:00
dlhl60d.c	iio: pressure: Add driver for DLH pressure sensors	2019-12-29 15:20:08 +00:00
dps310.c	iio: dps310: Add pressure sensing capability	2019-06-08 12:33:32 +01:00
hid-sensor-press.c	iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger	2020-05-10 09:35:53 +01:00
hp03.c	iio: pressure: hp03: convert to i2c_new_dummy_device	2019-07-27 22:52:07 +01:00
hp206c.c	iio: pressure: hp206c: Use get_unaligned_be24()	2020-05-03 09:47:20 +01:00
icp10100.c	counter: 104-quad-8: Support Filter Clock Prescaler	2020-03-08 17:28:52 +00:00
Kconfig	iio: pressure: icp10100: add driver for InvenSense ICP-101xx	2020-03-08 17:28:52 +00:00
Makefile	iio: pressure: icp10100: add driver for InvenSense ICP-101xx	2020-03-08 17:28:52 +00:00
mpl115_i2c.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330	2019-06-05 17:37:06 +02:00
mpl115_spi.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330	2019-06-05 17:37:06 +02:00
mpl115.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330	2019-06-05 17:37:06 +02:00
mpl115.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330	2019-06-05 17:37:06 +02:00
mpl3115.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330	2019-06-05 17:37:06 +02:00
ms5611_core.c	iio: pressure: ms5611: switch to SPDX identifier	2018-09-08 15:04:02 +01:00
ms5611_i2c.c	iio: pressure: ms5611: Use get_unaligned_be24()	2020-05-03 09:47:20 +01:00
ms5611_spi.c	iio: pressure: ms5611: Use get_unaligned_be24()	2020-05-03 09:47:20 +01:00
ms5611.h	iio: pressure: ms5611: switch to SPDX identifier	2018-09-08 15:04:02 +01:00
ms5637.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177	2019-05-30 11:29:19 -07:00
st_pressure_buffer.c	iio:st_sensors: remove buffer allocation at each buffer enable	2019-08-11 09:26:04 +01:00
st_pressure_core.c	iio: st_sensors: Drop unneeded explicit castings	2020-03-21 10:26:21 +00:00
st_pressure_i2c.c	iio: st_sensors: Make use of device properties	2020-01-13 21:53:39 +00:00
st_pressure_spi.c	iio: st_sensors: Make use of device properties	2020-01-13 21:53:39 +00:00
st_pressure.h	iio: pressure: st_press: Mark default_press_pdata with __maybe_unused	2019-12-29 15:20:05 +00:00
t5403.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330	2019-06-05 17:37:06 +02:00
zpa2326_i2c.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174	2019-05-30 11:26:41 -07:00
zpa2326_spi.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174	2019-05-30 11:26:41 -07:00
zpa2326.c	iio: pressure: zpa2326: Use get_unaligned_le24()	2020-05-03 09:47:20 +01:00
zpa2326.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174	2019-05-30 11:26:41 -07:00