renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
66f03c614c
linux-next/arch/arm/mach-mmp/pxa168.c
Linus Torvalds 66f03c614c ARM: device tree work 
Most of these patches convert code from using static platform data to
 describing the hardware in the device tree. This is only the first
 half of the changes for v3.4 because a lot of patches for this topic
 came in the last week before the merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT24/a2CrR//JCVInAQKYdxAAn+fs7yv+P4OWG/nIhGdnPw8MQ2u9fvqA
 pmNL3Jy0eVowbENDcRRZgfhZ3ZlWBGUYym7J1uiFSrmHyJPoMtMvVg0miPYxLlpE
 vr8bzuSfGOUOa7+Fk6kFVGxS3ZHZTsDvuhMQUIt/2jHgOaesqPvZ1FYFAj1bZ1fm
 2CnQoF3OfnWAngHtoBXtgJxp/1r7+pHlGVbPYpmtHtikl45NmhqWza58aSQBilr+
 S90cVeZs91gyveoxz5N+YrO8+Dx05te3mF+dwWuKC6aDC6d76fjLak54AvYv2Pzr
 I6iaQPV8GIsXi5R4wptmVQAc5mbk5oktxJ7hCIHrmaBiAXygoVAYoqcuumoO3QDb
 QKz10ga1yBYcKYrKvBzKxQrChw53IPU6po+Dd66ALJvLlc3KONksiJs5T/5Wma7P
 v3VPcmZwPrJQbz+fQu6FysHeYQY+wfiR5E9Yz2OXs+PtkSy9OYsFFirdhJeWUPgA
 ASjNLs1y5rxqrJBt7cjyQiBbIf1awGWyzF0yUNrlYHxmhJ6vcxHfrGoW38VRRCTM
 8+JcxOHPRYrPfY7we6zsOn7ZeTWJduoUEeTxDnVS3w3zUIKCvkvkpHaJDvHvYcui
 T/yJnXdUD2O3E5+5k/5cCyde8RbSB9gKsNpIMNkK5BLSmbux3C72dE0sMQFysahI
 hS8aDCDUQUU=
 =fMC+
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: device tree work" from Arnd Bergmann:
 "Most of these patches convert code from using static platform data to
  describing the hardware in the device tree.  This is only the first
  half of the changes for v3.4 because a lot of patches for this topic
  came in the last week before the merge window.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)
  Document: devicetree: add OF documents for arch-mmp
  ARM: dts: append DTS file of pxa168
  ARM: mmp: append OF support on pxa168
  ARM: mmp: enable rtc clk in pxa168
  i2c: pxa: add OF support
  serial: pxa: add OF support
  arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  ARM: OMAP2+: Remove extra ifdefs for board-generic
  ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
  ASoC: DT: Add digital microphone binding to PAZ00 board.
  ARM: dt: Add ARM PMU to tegra*.dtsi
  ARM: at91: at91sam9x5cm/dt: add leds support
  ARM: at91: usb_a9g20/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add leds support
  ARM: at91: usb_a9g20/dt: add leds support
  ARM: at91/pio: add new PIO3 features
  ARM: at91: add sam9_smc.o to at91sam9x5 build
  ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
  ARM: at91/tc: add device tree support to atmel_tclib
  ...
2012-03-27 16:47:35 -07:00

228 lines
6.9 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-mmp/pxa168.c
*
* Code specific to PXA168
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/cputype.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>
#include "common.h"
#include "clock.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
{
MFP_ADDR_X(GPIO0, GPIO36, 0x04c),
MFP_ADDR_X(GPIO37, GPIO55, 0x000),
MFP_ADDR_X(GPIO56, GPIO123, 0x0e0),
MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
MFP_ADDR_END,
};
void __init pxa168_init_irq(void)
{
icu_init_irq();
}
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
static APMU_CLK(eth, ETH, 0x09, 0);
static APMU_CLK(usb, USB, 0x12, 0);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
};
static int __init pxa168_init(void)
{
if (cpu_is_pxa168()) {
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa168_mfp_addr_map);
pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
}
return 0;
}
postcore_initcall(pxa168_init);
/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
static void __init pxa168_timer_init(void)
{
/* this is early, we have to initialize the CCU registers by
* ourselves instead of using clk_* API. Clock rate is defined
* by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
*/
__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
/* 3.25MHz, bus/functional clock enabled, release reset */
__raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
timer_init(IRQ_PXA168_TIMER1);
}
struct sys_timer pxa168_timer = {
.init = pxa168_timer_init,
};
void pxa168_clear_keypad_wakeup(void)
{
uint32_t val;
uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
/* wake event clear is needed in order to clear keypad interrupt */
val = __raw_readl(APMU_WAKE_CLR);
__raw_writel(val | mask, APMU_WAKE_CLR);
}
/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
struct resource pxa168_resource_gpio[] = {
{
.start = 0xd4019000,
.end = 0xd4019fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PXA168_GPIOX,
.end = IRQ_PXA168_GPIOX,
.name = "gpio_mux",
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_gpio = {
.name = "pxa-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa168_resource_gpio),
.resource = pxa168_resource_gpio,
};
struct resource pxa168_usb_host_resources[] = {
/* USB Host conroller register base */
[0] = {
.start = 0xd4209000,
.end = 0xd4209000 + 0x200,
.flags = IORESOURCE_MEM,
.name = "pxa168-usb-host",
},
/* USB PHY register base */
[1] = {
.start = 0xd4206000,
.end = 0xd4206000 + 0xff,
.flags = IORESOURCE_MEM,
.name = "pxa168-usb-phy",
},
[2] = {
.start = IRQ_PXA168_USB2,
.end = IRQ_PXA168_USB2,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
struct platform_device pxa168_device_usb_host = {
.name = "pxa168-ehci",
.id = -1,
.dev = {
.dma_mask = &pxa168_usb_host_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
.resource = pxa168_usb_host_resources,
};
int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
{
pxa168_device_usb_host.dev.platform_data = pdata;
return platform_device_register(&pxa168_device_usb_host);
}
void pxa168_restart(char mode, const char *cmd)
{
soft_restart(0xffff0000);
}
View Git Blame Copy Permalink