2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
linux-next/arch/arm/mach-mmp/Kconfig
Haojian Zhuang b57870e28d ARM: mmp: select pinctrl driver
Pinctrl driver is necessary for MMP DT & MMP2 DT platforms.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21 13:18:04 +08:00

140 lines
3.5 KiB
Plaintext

if ARCH_MMP
menu "Marvell PXA168/910/MMP2 Implmentations"
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Aspenite Development Board.
config MACH_ZYLONITE2
bool "Marvell's PXA168 Zylonite2 Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Zylonite2 Development Board.
config MACH_AVENGERS_LITE
bool "Marvell's PXA168 Avengers Lite Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Avengers Lite Development Board.
config MACH_TAVOREVB
bool "Marvell's PXA910 TavorEVB Development Board"
select CPU_PXA910
help
Say 'Y' here if you want to support the Marvell PXA910-based
TavorEVB Development Board.
config MACH_TTC_DKB
bool "Marvell's PXA910 TavorEVB Development Board"
select CPU_PXA910
help
Say 'Y' here if you want to support the Marvell PXA910-based
TTC_DKB Development Board.
config MACH_BROWNSTONE
bool "Marvell's Brownstone Development Platform"
depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Brown Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARMv7 architecture.
config MACH_FLINT
bool "Marvell's Flint Development Platform"
depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Flint Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARMv7 architecture.
config MACH_MARVELL_JASPER
bool "Marvell's Jasper Development Platform"
depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-base
Jasper Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARMv7 architecture.
config MACH_TETON_BGA
bool "Marvell's PXA168 Teton BGA Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
config MACH_GPLUGD
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
GuruPlug Display (gplugD) Board
config MACH_MMP_DT
bool "Support MMP (ARMv5) platforms from device tree"
select CPU_PXA168
select CPU_PXA910
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
help
Include support for Marvell MMP2 based platforms using
the device tree. Needn't select any other machine while
MACH_MMP_DT is enabled.
config MACH_MMP2_DT
bool "Support MMP2 (ARMv7) platforms from device tree"
depends on !CPU_MOHAWK
select CPU_MMP2
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
help
Include support for Marvell MMP2 based platforms using
the device tree.
endmenu
config CPU_PXA168
bool
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
select COMMON_CLK
select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
config USB_EHCI_MV_U2O
bool "EHCI support for PXA USB OTG controller"
depends on USB_EHCI_MV
help
Enables support for OTG controller which can be switched to host mode.
endif