Stefan Popa 6376cbe549 iio: dac: ad5446: Add support for new AD5600 DAC ... The AD5600 is a single channel, 16-bit resolution, voltage output digital to analog converter (DAC). The AD5600 uses a 3-wire SPI interface. It is part of the AD5541 family of DACs. The ad5446 IIO driver implements support for some of these DACs (in the AD5441 family), so the change is a simple entry in this driver. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5600.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2019-11-10 15:14:06 +00:00
..
accel	iio: st: Drop GPIO include	2019-10-27 15:55:45 +00:00
adc	iio: adc: stm32: allow to tune analog clock	2019-11-09 12:37:18 +00:00
afe	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
amplifiers	Second set of IIO device support, features, cleanups and minor fixes for 5.3.	2019-07-01 10:58:13 +02:00
buffer	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
chemical	iio: chemical: sgp30: drop excess semicolon	2019-10-22 12:41:07 +01:00
common	chrome platform changes for v5.4	2019-09-19 14:14:28 -07:00
dac	iio: dac: ad5446: Add support for new AD5600 DAC	2019-11-10 15:14:06 +00:00
dummy	spi: docs: convert to ReST and add it to the kABI bookset	2019-07-31 14:13:13 -06:00
frequency	iio: frequency: adf4371: Fix output frequency setting	2019-08-05 17:38:33 +01:00
gyro	iio: gyro: adis16136: check ret val for non-zero vs less-than-zero	2019-11-03 10:14:44 +00:00
health	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174	2019-05-30 11:26:41 -07:00
humidity	iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions	2019-11-02 14:39:41 +00:00
imu	iio: imu: st_lsm6dsx: express odr in mHZ	2019-11-09 13:23:17 +00:00
light	iio: light: add driver for veml6030 ambient light sensor	2019-11-10 10:39:33 +00:00
magnetometer	iio: st: Drop GPIO include	2019-10-27 15:55:45 +00:00
multiplexer	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
orientation	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309	2019-06-05 17:37:04 +02:00
potentiometer	iio: potentiometer: add a driver for Maxim 5432-5435	2019-08-05 14:25:08 +01:00
potentiostat	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
pressure	iio: st: Drop GPIO include	2019-10-27 15:55:45 +00:00
proximity	iio: proximity: pulsedlight v2: Tidy up an endian issue	2019-10-18 19:57:47 +01:00
resolver	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
temperature	iio: temperature: Add support for LTC2983	2019-10-22 11:34:19 +01:00
trigger	IIO: stm32: Remove quadrature related functions from trigger driver	2019-07-27 20:11:18 +01:00
iio_core_trigger.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
iio_core.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
industrialio-buffer.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
industrialio-configfs.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
industrialio-core.c	iio: core: Add optional symbolic label to device attributes	2019-10-07 21:31:18 +01:00
industrialio-event.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
industrialio-sw-device.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
industrialio-sw-trigger.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
industrialio-trigger.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
industrialio-triggered-event.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
inkern.c	Driver Core and debugfs changes for 5.3-rc1	2019-07-12 12:24:03 -07:00
Kconfig	Second set of IIO device support, features, cleanups and minor fixes for 5.3.	2019-07-01 10:58:13 +02:00
Makefile	counter: stm32-lptimer: add counter device	2019-04-25 21:33:41 +02:00