mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
626d686487
This commit implements the CPU hotplug support for the Marvell Armada 38x platform. Similarly to what was done for the Armada XP, this commit: * Implements the ->cpu_die() function of SMP operations by calling armada_38x_do_cpu_suspend() to enter the deep idle state for CPUs going offline. * Implements a dummy ->cpu_kill() function, simply needed for the kernel to know we have CPU hotplug support. * The mvebu_cortex_a9_boot_secondary() function makes sure to wake up the CPU if waiting in deep idle state by sending an IPI before deasserting the CPUs from reset. This is because mvebu_cortex_a9_boot_secondary() is now used in two different situations: for the initial boot of secondary CPUs (where CPU reset deassert is used to wake up CPUs) and for CPU hotplug (where an IPI is used to take CPU out of deep idle). * At boot time, we exit from the idle state in the ->smp_secondary_init() hook. This commit has been tested using CPU hotplug through sysfs (/sys/devices/system/cpu/cpuX/online) and using kexec. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1414669184-16785-5-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
651 lines
18 KiB
C
651 lines
18 KiB
C
/*
|
|
* Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
|
|
*
|
|
* Copyright (C) 2012 Marvell
|
|
*
|
|
* Yehuda Yitschak <yehuday@marvell.com>
|
|
* Gregory Clement <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* The Armada 370 and Armada XP SOCs have a power management service
|
|
* unit which is responsible for powering down and waking up CPUs and
|
|
* other SOC units
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "mvebu-pmsu: " fmt
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/smp.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/cp15.h>
|
|
#include <asm/smp_scu.h>
|
|
#include <asm/smp_plat.h>
|
|
#include <asm/suspend.h>
|
|
#include <asm/tlbflush.h>
|
|
#include "common.h"
|
|
|
|
|
|
#define PMSU_BASE_OFFSET 0x100
|
|
#define PMSU_REG_SIZE 0x1000
|
|
|
|
/* PMSU MP registers */
|
|
#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104)
|
|
#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18)
|
|
#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16)
|
|
#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20)
|
|
|
|
#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108)
|
|
|
|
#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0)
|
|
|
|
#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c)
|
|
#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16)
|
|
#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17)
|
|
#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20)
|
|
#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21)
|
|
#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22)
|
|
#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24)
|
|
#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25)
|
|
|
|
#define PMSU_EVENT_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x120)
|
|
#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE BIT(1)
|
|
#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK BIT(17)
|
|
|
|
#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
|
|
|
|
/* PMSU fabric registers */
|
|
#define L2C_NFABRIC_PM_CTL 0x4
|
|
#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20)
|
|
|
|
/* PMSU delay registers */
|
|
#define PMSU_POWERDOWN_DELAY 0xF04
|
|
#define PMSU_POWERDOWN_DELAY_PMU BIT(1)
|
|
#define PMSU_POWERDOWN_DELAY_MASK 0xFFFE
|
|
#define PMSU_DFLT_ARMADA38X_DELAY 0x64
|
|
|
|
/* CA9 MPcore SoC Control registers */
|
|
|
|
#define MPCORE_RESET_CTL 0x64
|
|
#define MPCORE_RESET_CTL_L2 BIT(0)
|
|
#define MPCORE_RESET_CTL_DEBUG BIT(16)
|
|
|
|
#define SRAM_PHYS_BASE 0xFFFF0000
|
|
#define BOOTROM_BASE 0xFFF00000
|
|
#define BOOTROM_SIZE 0x100000
|
|
|
|
#define ARMADA_370_CRYPT0_ENG_TARGET 0x9
|
|
#define ARMADA_370_CRYPT0_ENG_ATTR 0x1
|
|
|
|
extern void ll_disable_coherency(void);
|
|
extern void ll_enable_coherency(void);
|
|
|
|
extern void armada_370_xp_cpu_resume(void);
|
|
extern void armada_38x_cpu_resume(void);
|
|
|
|
static phys_addr_t pmsu_mp_phys_base;
|
|
static void __iomem *pmsu_mp_base;
|
|
|
|
static void *mvebu_cpu_resume;
|
|
|
|
static struct of_device_id of_pmsu_table[] = {
|
|
{ .compatible = "marvell,armada-370-pmsu", },
|
|
{ .compatible = "marvell,armada-370-xp-pmsu", },
|
|
{ .compatible = "marvell,armada-380-pmsu", },
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
|
|
{
|
|
writel(virt_to_phys(boot_addr), pmsu_mp_base +
|
|
PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
|
|
}
|
|
|
|
extern unsigned char mvebu_boot_wa_start;
|
|
extern unsigned char mvebu_boot_wa_end;
|
|
|
|
/*
|
|
* This function sets up the boot address workaround needed for SMP
|
|
* boot on Armada 375 Z1 and cpuidle on Armada 370. It unmaps the
|
|
* BootROM Mbus window, and instead remaps a crypto SRAM into which a
|
|
* custom piece of code is copied to replace the problematic BootROM.
|
|
*/
|
|
int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
|
|
unsigned int crypto_eng_attribute,
|
|
phys_addr_t resume_addr_reg)
|
|
{
|
|
void __iomem *sram_virt_base;
|
|
u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start;
|
|
|
|
mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
|
|
mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute,
|
|
SRAM_PHYS_BASE, SZ_64K);
|
|
|
|
sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
|
|
if (!sram_virt_base) {
|
|
pr_err("Unable to map SRAM to setup the boot address WA\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memcpy(sram_virt_base, &mvebu_boot_wa_start, code_len);
|
|
|
|
/*
|
|
* The last word of the code copied in SRAM must contain the
|
|
* physical base address of the PMSU register. We
|
|
* intentionally store this address in the native endianness
|
|
* of the system.
|
|
*/
|
|
__raw_writel((unsigned long)resume_addr_reg,
|
|
sram_virt_base + code_len - 4);
|
|
|
|
iounmap(sram_virt_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mvebu_v7_pmsu_init(void)
|
|
{
|
|
struct device_node *np;
|
|
struct resource res;
|
|
int ret = 0;
|
|
|
|
np = of_find_matching_node(NULL, of_pmsu_table);
|
|
if (!np)
|
|
return 0;
|
|
|
|
pr_info("Initializing Power Management Service Unit\n");
|
|
|
|
if (of_address_to_resource(np, 0, &res)) {
|
|
pr_err("unable to get resource\n");
|
|
ret = -ENOENT;
|
|
goto out;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) {
|
|
pr_warn(FW_WARN "deprecated pmsu binding\n");
|
|
res.start = res.start - PMSU_BASE_OFFSET;
|
|
res.end = res.start + PMSU_REG_SIZE - 1;
|
|
}
|
|
|
|
if (!request_mem_region(res.start, resource_size(&res),
|
|
np->full_name)) {
|
|
pr_err("unable to request region\n");
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
pmsu_mp_phys_base = res.start;
|
|
|
|
pmsu_mp_base = ioremap(res.start, resource_size(&res));
|
|
if (!pmsu_mp_base) {
|
|
pr_err("unable to map registers\n");
|
|
release_mem_region(res.start, resource_size(&res));
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
|
|
static void mvebu_v7_pmsu_enable_l2_powerdown_onidle(void)
|
|
{
|
|
u32 reg;
|
|
|
|
if (pmsu_mp_base == NULL)
|
|
return;
|
|
|
|
/* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */
|
|
reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
|
|
reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
|
|
writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
|
|
}
|
|
|
|
enum pmsu_idle_prepare_flags {
|
|
PMSU_PREPARE_NORMAL = 0,
|
|
PMSU_PREPARE_DEEP_IDLE = BIT(0),
|
|
PMSU_PREPARE_SNOOP_DISABLE = BIT(1),
|
|
};
|
|
|
|
/* No locking is needed because we only access per-CPU registers */
|
|
static int mvebu_v7_pmsu_idle_prepare(unsigned long flags)
|
|
{
|
|
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
|
|
u32 reg;
|
|
|
|
if (pmsu_mp_base == NULL)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Adjust the PMSU configuration to wait for WFI signal, enable
|
|
* IRQ and FIQ as wakeup events, set wait for snoop queue empty
|
|
* indication and mask IRQ and FIQ from CPU
|
|
*/
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
|
|
PMSU_STATUS_AND_MASK_IRQ_WAKEUP |
|
|
PMSU_STATUS_AND_MASK_FIQ_WAKEUP |
|
|
PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
|
|
PMSU_STATUS_AND_MASK_IRQ_MASK |
|
|
PMSU_STATUS_AND_MASK_FIQ_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
|
|
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
/* ask HW to power down the L2 Cache if needed */
|
|
if (flags & PMSU_PREPARE_DEEP_IDLE)
|
|
reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
|
|
|
|
/* request power down */
|
|
reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
|
|
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
|
|
if (flags & PMSU_PREPARE_SNOOP_DISABLE) {
|
|
/* Disable snoop disable by HW - SW is taking care of it */
|
|
reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
|
|
reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
|
|
writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
|
|
{
|
|
unsigned long flags = PMSU_PREPARE_SNOOP_DISABLE;
|
|
int ret;
|
|
|
|
if (deepidle)
|
|
flags |= PMSU_PREPARE_DEEP_IDLE;
|
|
|
|
ret = mvebu_v7_pmsu_idle_prepare(flags);
|
|
if (ret)
|
|
return ret;
|
|
|
|
v7_exit_coherency_flush(all);
|
|
|
|
ll_disable_coherency();
|
|
|
|
dsb();
|
|
|
|
wfi();
|
|
|
|
/* If we are here, wfi failed. As processors run out of
|
|
* coherency for some time, tlbs might be stale, so flush them
|
|
*/
|
|
local_flush_tlb_all();
|
|
|
|
ll_enable_coherency();
|
|
|
|
/* Test the CR_C bit and set it if it was cleared */
|
|
asm volatile(
|
|
"mrc p15, 0, r0, c1, c0, 0 \n\t"
|
|
"tst r0, #(1 << 2) \n\t"
|
|
"orreq r0, r0, #(1 << 2) \n\t"
|
|
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
|
|
"isb "
|
|
: : : "r0");
|
|
|
|
pr_debug("Failed to suspend the system\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada_370_xp_cpu_suspend(unsigned long deepidle)
|
|
{
|
|
return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
|
|
}
|
|
|
|
int armada_38x_do_cpu_suspend(unsigned long deepidle)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
if (deepidle)
|
|
flags |= PMSU_PREPARE_DEEP_IDLE;
|
|
|
|
mvebu_v7_pmsu_idle_prepare(flags);
|
|
/*
|
|
* Already flushed cache, but do it again as the outer cache
|
|
* functions dirty the cache with spinlocks
|
|
*/
|
|
v7_exit_coherency_flush(louis);
|
|
|
|
scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF);
|
|
|
|
cpu_do_idle();
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int armada_38x_cpu_suspend(unsigned long deepidle)
|
|
{
|
|
return cpu_suspend(false, armada_38x_do_cpu_suspend);
|
|
}
|
|
|
|
/* No locking is needed because we only access per-CPU registers */
|
|
void mvebu_v7_pmsu_idle_exit(void)
|
|
{
|
|
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
|
|
u32 reg;
|
|
|
|
if (pmsu_mp_base == NULL)
|
|
return;
|
|
/* cancel ask HW to power down the L2 Cache if possible */
|
|
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
|
|
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
|
|
/* cancel Enable wakeup events and mask interrupts */
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
|
|
reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
|
|
reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
|
|
reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
}
|
|
|
|
static int mvebu_v7_cpu_pm_notify(struct notifier_block *self,
|
|
unsigned long action, void *hcpu)
|
|
{
|
|
if (action == CPU_PM_ENTER) {
|
|
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
|
|
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cpu_resume);
|
|
} else if (action == CPU_PM_EXIT) {
|
|
mvebu_v7_pmsu_idle_exit();
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block mvebu_v7_cpu_pm_notifier = {
|
|
.notifier_call = mvebu_v7_cpu_pm_notify,
|
|
};
|
|
|
|
static struct platform_device mvebu_v7_cpuidle_device;
|
|
|
|
static __init int armada_370_cpuidle_init(void)
|
|
{
|
|
struct device_node *np;
|
|
phys_addr_t redirect_reg;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
|
|
if (!np)
|
|
return -ENODEV;
|
|
of_node_put(np);
|
|
|
|
/*
|
|
* On Armada 370, there is "a slow exit process from the deep
|
|
* idle state due to heavy L1/L2 cache cleanup operations
|
|
* performed by the BootROM software". To avoid this, we
|
|
* replace the restart code of the bootrom by a a simple jump
|
|
* to the boot address. Then the code located at this boot
|
|
* address will take care of the initialization.
|
|
*/
|
|
redirect_reg = pmsu_mp_phys_base + PMSU_BOOT_ADDR_REDIRECT_OFFSET(0);
|
|
mvebu_setup_boot_addr_wa(ARMADA_370_CRYPT0_ENG_TARGET,
|
|
ARMADA_370_CRYPT0_ENG_ATTR,
|
|
redirect_reg);
|
|
|
|
mvebu_cpu_resume = armada_370_xp_cpu_resume;
|
|
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
|
|
mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __init int armada_38x_cpuidle_init(void)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *mpsoc_base;
|
|
u32 reg;
|
|
|
|
np = of_find_compatible_node(NULL, NULL,
|
|
"marvell,armada-380-coherency-fabric");
|
|
if (!np)
|
|
return -ENODEV;
|
|
of_node_put(np);
|
|
|
|
np = of_find_compatible_node(NULL, NULL,
|
|
"marvell,armada-380-mpcore-soc-ctrl");
|
|
if (!np)
|
|
return -ENODEV;
|
|
mpsoc_base = of_iomap(np, 0);
|
|
BUG_ON(!mpsoc_base);
|
|
of_node_put(np);
|
|
|
|
/* Set up reset mask when powering down the cpus */
|
|
reg = readl(mpsoc_base + MPCORE_RESET_CTL);
|
|
reg |= MPCORE_RESET_CTL_L2;
|
|
reg |= MPCORE_RESET_CTL_DEBUG;
|
|
writel(reg, mpsoc_base + MPCORE_RESET_CTL);
|
|
iounmap(mpsoc_base);
|
|
|
|
/* Set up delay */
|
|
reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY);
|
|
reg &= ~PMSU_POWERDOWN_DELAY_MASK;
|
|
reg |= PMSU_DFLT_ARMADA38X_DELAY;
|
|
reg |= PMSU_POWERDOWN_DELAY_PMU;
|
|
writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY);
|
|
|
|
mvebu_cpu_resume = armada_38x_cpu_resume;
|
|
mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
|
|
mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __init int armada_xp_cpuidle_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
|
|
if (!np)
|
|
return -ENODEV;
|
|
of_node_put(np);
|
|
|
|
mvebu_cpu_resume = armada_370_xp_cpu_resume;
|
|
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
|
|
mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mvebu_v7_cpu_pm_init(void)
|
|
{
|
|
struct device_node *np;
|
|
int ret;
|
|
|
|
np = of_find_matching_node(NULL, of_pmsu_table);
|
|
if (!np)
|
|
return 0;
|
|
of_node_put(np);
|
|
|
|
if (of_machine_is_compatible("marvell,armadaxp"))
|
|
ret = armada_xp_cpuidle_init();
|
|
else if (of_machine_is_compatible("marvell,armada370"))
|
|
ret = armada_370_cpuidle_init();
|
|
else if (of_machine_is_compatible("marvell,armada380"))
|
|
ret = armada_38x_cpuidle_init();
|
|
else
|
|
return 0;
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
mvebu_v7_pmsu_enable_l2_powerdown_onidle();
|
|
platform_device_register(&mvebu_v7_cpuidle_device);
|
|
cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier);
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(mvebu_v7_cpu_pm_init);
|
|
early_initcall(mvebu_v7_pmsu_init);
|
|
|
|
static void mvebu_pmsu_dfs_request_local(void *data)
|
|
{
|
|
u32 reg;
|
|
u32 cpu = smp_processor_id();
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Prepare to enter idle */
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
|
|
PMSU_STATUS_AND_MASK_IRQ_MASK |
|
|
PMSU_STATUS_AND_MASK_FIQ_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
|
|
/* Request the DFS transition */
|
|
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
|
|
reg |= PMSU_CONTROL_AND_CONFIG_DFS_REQ;
|
|
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
|
|
|
|
/* The fact of entering idle will trigger the DFS transition */
|
|
wfi();
|
|
|
|
/*
|
|
* We're back from idle, the DFS transition has completed,
|
|
* clear the idle wait indication.
|
|
*/
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
int mvebu_pmsu_dfs_request(int cpu)
|
|
{
|
|
unsigned long timeout;
|
|
int hwcpu = cpu_logical_map(cpu);
|
|
u32 reg;
|
|
|
|
/* Clear any previous DFS DONE event */
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE;
|
|
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
|
|
/* Mask the DFS done interrupt, since we are going to poll */
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
reg |= PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
|
|
/* Trigger the DFS on the appropriate CPU */
|
|
smp_call_function_single(cpu, mvebu_pmsu_dfs_request_local,
|
|
NULL, false);
|
|
|
|
/* Poll until the DFS done event is generated */
|
|
timeout = jiffies + HZ;
|
|
while (time_before(jiffies, timeout)) {
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
if (reg & PMSU_EVENT_STATUS_AND_MASK_DFS_DONE)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIME;
|
|
|
|
/* Restore the DFS mask to its original state */
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init armada_xp_pmsu_cpufreq_init(void)
|
|
{
|
|
struct device_node *np;
|
|
struct resource res;
|
|
int ret, cpu;
|
|
|
|
if (!of_machine_is_compatible("marvell,armadaxp"))
|
|
return 0;
|
|
|
|
/*
|
|
* In order to have proper cpufreq handling, we need to ensure
|
|
* that the Device Tree description of the CPU clock includes
|
|
* the definition of the PMU DFS registers. If not, we do not
|
|
* register the clock notifier and the cpufreq driver. This
|
|
* piece of code is only for compatibility with old Device
|
|
* Trees.
|
|
*/
|
|
np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
|
|
if (!np)
|
|
return 0;
|
|
|
|
ret = of_address_to_resource(np, 1, &res);
|
|
if (ret) {
|
|
pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
|
|
of_node_put(np);
|
|
|
|
/*
|
|
* For each CPU, this loop registers the operating points
|
|
* supported (which are the nominal CPU frequency and half of
|
|
* it), and registers the clock notifier that will take care
|
|
* of doing the PMSU part of a frequency transition.
|
|
*/
|
|
for_each_possible_cpu(cpu) {
|
|
struct device *cpu_dev;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
cpu_dev = get_cpu_device(cpu);
|
|
if (!cpu_dev) {
|
|
pr_err("Cannot get CPU %d\n", cpu);
|
|
continue;
|
|
}
|
|
|
|
clk = clk_get(cpu_dev, 0);
|
|
if (IS_ERR(clk)) {
|
|
pr_err("Cannot get clock for CPU %d\n", cpu);
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
/*
|
|
* In case of a failure of dev_pm_opp_add(), we don't
|
|
* bother with cleaning up the registered OPP (there's
|
|
* no function to do so), and simply cancel the
|
|
* registration of the cpufreq device.
|
|
*/
|
|
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
|
|
if (ret) {
|
|
clk_put(clk);
|
|
return ret;
|
|
}
|
|
|
|
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
|
|
if (ret) {
|
|
clk_put(clk);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
device_initcall(armada_xp_pmsu_cpufreq_init);
|