mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
f6d23c2e2e
Use the current PIO mode value instead of the current transfer speed of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
348 lines
10 KiB
C
348 lines
10 KiB
C
/*
|
|
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
|
|
* IDE driver for Linux.
|
|
*
|
|
* Copyright (c) 2000-2002 Vojtech Pavlik
|
|
* Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* Based on the work of:
|
|
* Andre Hedrick
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
|
|
#define DRV_NAME "amd74xx"
|
|
|
|
enum {
|
|
AMD_IDE_CONFIG = 0x41,
|
|
AMD_CABLE_DETECT = 0x42,
|
|
AMD_DRIVE_TIMING = 0x48,
|
|
AMD_8BIT_TIMING = 0x4e,
|
|
AMD_ADDRESS_SETUP = 0x4c,
|
|
AMD_UDMA_TIMING = 0x50,
|
|
};
|
|
|
|
static unsigned int amd_80w;
|
|
static unsigned int amd_clock;
|
|
|
|
static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
|
|
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
|
|
|
|
static inline u8 amd_offset(struct pci_dev *dev)
|
|
{
|
|
return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
|
|
}
|
|
|
|
/*
|
|
* amd_set_speed() writes timing values to the chipset registers
|
|
*/
|
|
|
|
static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
|
|
struct ide_timing *timing)
|
|
{
|
|
u8 t = 0, offset = amd_offset(dev);
|
|
|
|
pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
|
|
t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
|
|
pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
|
|
|
|
pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
|
|
((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
|
|
|
|
pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
|
|
((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
|
|
|
|
switch (udma_mask) {
|
|
case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
|
|
case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break;
|
|
case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break;
|
|
case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break;
|
|
default: return;
|
|
}
|
|
|
|
if (timing->udma)
|
|
pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t);
|
|
}
|
|
|
|
/*
|
|
* amd_set_drive() computes timing values and configures the chipset
|
|
* to a desired transfer mode. It also can be called by upper layers.
|
|
*/
|
|
|
|
static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
ide_drive_t *peer = ide_get_pair_dev(drive);
|
|
struct ide_timing t, p;
|
|
int T, UT;
|
|
u8 udma_mask = hwif->ultra_mask;
|
|
const u8 speed = drive->dma_mode;
|
|
|
|
T = 1000000000 / amd_clock;
|
|
UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
|
|
|
|
ide_timing_compute(drive, speed, &t, T, UT);
|
|
|
|
if (peer) {
|
|
ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
|
|
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
|
|
}
|
|
|
|
if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
|
|
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
|
|
|
|
amd_set_speed(dev, drive->dn, udma_mask, &t);
|
|
}
|
|
|
|
/*
|
|
* amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
|
|
*/
|
|
|
|
static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
drive->dma_mode = drive->pio_mode;
|
|
amd_set_drive(hwif, drive);
|
|
}
|
|
|
|
static void amd7409_cable_detect(struct pci_dev *dev)
|
|
{
|
|
/* no host side cable detection */
|
|
amd_80w = 0x03;
|
|
}
|
|
|
|
static void amd7411_cable_detect(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
u32 u = 0;
|
|
u8 t = 0, offset = amd_offset(dev);
|
|
|
|
pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
|
|
pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
|
|
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
|
|
for (i = 24; i >= 0; i -= 8)
|
|
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
|
|
printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
|
|
"cable bits correctly. Enabling workaround.\n",
|
|
pci_name(dev));
|
|
amd_80w |= (1 << (1 - (i >> 4)));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The initialization callback. Initialize drive independent registers.
|
|
*/
|
|
|
|
static int init_chipset_amd74xx(struct pci_dev *dev)
|
|
{
|
|
u8 t = 0, offset = amd_offset(dev);
|
|
|
|
/*
|
|
* Check 80-wire cable presence.
|
|
*/
|
|
|
|
if (dev->vendor == PCI_VENDOR_ID_AMD &&
|
|
dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
|
|
; /* no UDMA > 2 */
|
|
else if (dev->vendor == PCI_VENDOR_ID_AMD &&
|
|
dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
|
|
amd7409_cable_detect(dev);
|
|
else
|
|
amd7411_cable_detect(dev);
|
|
|
|
/*
|
|
* Take care of prefetch & postwrite.
|
|
*/
|
|
|
|
pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
|
|
/*
|
|
* Check for broken FIFO support.
|
|
*/
|
|
if (dev->vendor == PCI_VENDOR_ID_AMD &&
|
|
dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
|
|
t &= 0x0f;
|
|
else
|
|
t |= 0xf0;
|
|
pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 amd_cable_detect(ide_hwif_t *hwif)
|
|
{
|
|
if ((amd_80w >> hwif->channel) & 1)
|
|
return ATA_CBL_PATA80;
|
|
else
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
static const struct ide_port_ops amd_port_ops = {
|
|
.set_pio_mode = amd_set_pio_mode,
|
|
.set_dma_mode = amd_set_drive,
|
|
.cable_detect = amd_cable_detect,
|
|
};
|
|
|
|
#define IDE_HFLAGS_AMD \
|
|
(IDE_HFLAG_PIO_NO_BLACKLIST | \
|
|
IDE_HFLAG_POST_SET_MODE | \
|
|
IDE_HFLAG_IO_32BIT | \
|
|
IDE_HFLAG_UNMASK_IRQS)
|
|
|
|
#define DECLARE_AMD_DEV(swdma, udma) \
|
|
{ \
|
|
.name = DRV_NAME, \
|
|
.init_chipset = init_chipset_amd74xx, \
|
|
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
|
|
.port_ops = &amd_port_ops, \
|
|
.host_flags = IDE_HFLAGS_AMD, \
|
|
.pio_mask = ATA_PIO5, \
|
|
.swdma_mask = swdma, \
|
|
.mwdma_mask = ATA_MWDMA2, \
|
|
.udma_mask = udma, \
|
|
}
|
|
|
|
#define DECLARE_NV_DEV(udma) \
|
|
{ \
|
|
.name = DRV_NAME, \
|
|
.init_chipset = init_chipset_amd74xx, \
|
|
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
|
|
.port_ops = &amd_port_ops, \
|
|
.host_flags = IDE_HFLAGS_AMD, \
|
|
.pio_mask = ATA_PIO5, \
|
|
.swdma_mask = ATA_SWDMA2, \
|
|
.mwdma_mask = ATA_MWDMA2, \
|
|
.udma_mask = udma, \
|
|
}
|
|
|
|
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
|
|
/* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2),
|
|
/* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
|
|
/* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
|
|
/* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),
|
|
|
|
/* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5),
|
|
/* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6),
|
|
|
|
/* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
|
|
};
|
|
|
|
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct ide_port_info d;
|
|
u8 idx = id->driver_data;
|
|
|
|
d = amd74xx_chipsets[idx];
|
|
|
|
/*
|
|
* Check for bad SWDMA and incorrectly wired Serenade mainboards.
|
|
*/
|
|
if (idx == 1) {
|
|
if (dev->revision <= 7)
|
|
d.swdma_mask = 0;
|
|
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
|
|
} else if (idx == 3) {
|
|
if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
|
|
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
|
|
d.udma_mask = ATA_UDMA5;
|
|
}
|
|
|
|
/*
|
|
* It seems that on some nVidia controllers using AltStatus
|
|
* register can be unreliable so default to Status register
|
|
* if the device is in Compatibility Mode.
|
|
*/
|
|
if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
|
|
ide_pci_is_in_compatibility_mode(dev))
|
|
d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;
|
|
|
|
printk(KERN_INFO "%s %s: UDMA%s controller\n",
|
|
d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
|
|
|
|
/*
|
|
* Determine the system bus clock.
|
|
*/
|
|
amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
|
|
|
|
switch (amd_clock) {
|
|
case 33000: amd_clock = 33333; break;
|
|
case 37000: amd_clock = 37500; break;
|
|
case 41000: amd_clock = 41666; break;
|
|
}
|
|
|
|
if (amd_clock < 20000 || amd_clock > 50000) {
|
|
printk(KERN_WARNING "%s: User given PCI clock speed impossible"
|
|
" (%d), using 33 MHz instead.\n",
|
|
d.name, amd_clock);
|
|
amd_clock = 33333;
|
|
}
|
|
|
|
return ide_pci_init_one(dev, &d, NULL);
|
|
}
|
|
|
|
static const struct pci_device_id amd74xx_pci_tbl[] = {
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 },
|
|
#ifdef CONFIG_BLK_DEV_IDE_SATA
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 },
|
|
#endif
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 },
|
|
#ifdef CONFIG_BLK_DEV_IDE_SATA
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 },
|
|
#endif
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
|
|
|
|
static struct pci_driver amd74xx_pci_driver = {
|
|
.name = "AMD_IDE",
|
|
.id_table = amd74xx_pci_tbl,
|
|
.probe = amd74xx_probe,
|
|
.remove = ide_pci_remove,
|
|
.suspend = ide_pci_suspend,
|
|
.resume = ide_pci_resume,
|
|
};
|
|
|
|
static int __init amd74xx_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&amd74xx_pci_driver);
|
|
}
|
|
|
|
static void __exit amd74xx_ide_exit(void)
|
|
{
|
|
pci_unregister_driver(&amd74xx_pci_driver);
|
|
}
|
|
|
|
module_init(amd74xx_ide_init);
|
|
module_exit(amd74xx_ide_exit);
|
|
|
|
MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz");
|
|
MODULE_DESCRIPTION("AMD PCI IDE driver");
|
|
MODULE_LICENSE("GPL");
|