mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 22:24:09 +08:00
9d3dda5c0d
To enter high speed mode, following steps should be done: 1. When running in high speed mode, i2c clock rate is different from standard mode. Clock rate must be set according to specification first. 2. When i2c controller sends a master code and wins arbitration, high speed mode is entered. If you want to enable high speed mode, the following members of platform data should be set to proper value: 1. "high_mode" should be set to "1". 2. "master_code" should be set to "8'b 0000_1xxx"(x is 0 or 1). If no master_code is set, set to default value 0xe. 3. "rate" should be set according to specification. Signed-off-by: Leilei Shang <shangll@marvell.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
86 lines
2.8 KiB
C
86 lines
2.8 KiB
C
/*
|
|
* i2c_pxa.h
|
|
*
|
|
* Copyright (C) 2002 Intrinsyc Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#ifndef _I2C_PXA_H_
|
|
#define _I2C_PXA_H_
|
|
|
|
#if 0
|
|
#define DEF_TIMEOUT 3
|
|
#else
|
|
/* need a longer timeout if we're dealing with the fact we may well be
|
|
* looking at a multi-master environment
|
|
*/
|
|
#define DEF_TIMEOUT 32
|
|
#endif
|
|
|
|
#define BUS_ERROR (-EREMOTEIO)
|
|
#define XFER_NAKED (-ECONNREFUSED)
|
|
#define I2C_RETRY (-2000) /* an error has occurred retry transmit */
|
|
|
|
/* ICR initialize bit values
|
|
*
|
|
* 15. FM 0 (100 Khz operation)
|
|
* 14. UR 0 (No unit reset)
|
|
* 13. SADIE 0 (Disables the unit from interrupting on slave addresses
|
|
* matching its slave address)
|
|
* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration
|
|
* in master mode)
|
|
* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode)
|
|
* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent)
|
|
* 9. IRFIE 1 (Enable interrupts from full buffer received)
|
|
* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty)
|
|
* 7. GCD 1 (Disables i2c unit response to general call messages as a slave)
|
|
* 6. IUE 0 (Disable unit until we change settings)
|
|
* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL)
|
|
* 4. MA 0 (Only send stop with the ICR stop bit)
|
|
* 3. TB 0 (We are not transmitting a byte initially)
|
|
* 2. ACKNAK 0 (Send an ACK after the unit receives a byte)
|
|
* 1. STOP 0 (Do not send a STOP)
|
|
* 0. START 0 (Do not send a START)
|
|
*
|
|
*/
|
|
#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
|
|
|
|
/* I2C status register init values
|
|
*
|
|
* 10. BED 1 (Clear bus error detected)
|
|
* 9. SAD 1 (Clear slave address detected)
|
|
* 7. IRF 1 (Clear IDBR Receive Full)
|
|
* 6. ITE 1 (Clear IDBR Transmit Empty)
|
|
* 5. ALD 1 (Clear Arbitration Loss Detected)
|
|
* 4. SSD 1 (Clear Slave Stop Detected)
|
|
*/
|
|
#define I2C_ISR_INIT 0x7FF /* status register init */
|
|
|
|
struct i2c_slave_client;
|
|
|
|
struct i2c_pxa_platform_data {
|
|
unsigned int slave_addr;
|
|
struct i2c_slave_client *slave;
|
|
unsigned int class;
|
|
unsigned int use_pio :1;
|
|
unsigned int fast_mode :1;
|
|
unsigned int high_mode:1;
|
|
unsigned char master_code;
|
|
unsigned long rate;
|
|
};
|
|
|
|
extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA3xx
|
|
extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
|
|
#endif
|
|
|
|
#endif
|