renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
Code
602cada851
linux-next/include/asm-arm/arch-sa1100/irqs.h
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/ 
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00

198 lines
7.3 KiB
C
Raw Blame History

/*
* linux/include/asm-arm/arch-sa1100/irqs.h
*
* Copyright (C) 1996 Russell King
* Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
* Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
*
* 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
*/
#define IRQ_GPIO0 0
#define IRQ_GPIO1 1
#define IRQ_GPIO2 2
#define IRQ_GPIO3 3
#define IRQ_GPIO4 4
#define IRQ_GPIO5 5
#define IRQ_GPIO6 6
#define IRQ_GPIO7 7
#define IRQ_GPIO8 8
#define IRQ_GPIO9 9
#define IRQ_GPIO10 10
#define IRQ_GPIO11_27 11
#define IRQ_LCD 12 /* LCD controller */
#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */
#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */
#define IRQ_Ser1UART 15 /* Ser. port 1 UART */
#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */
#define IRQ_Ser3UART 17 /* Ser. port 3 UART */
#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */
#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */
#define IRQ_DMA0 20 /* DMA controller channel 0 */
#define IRQ_DMA1 21 /* DMA controller channel 1 */
#define IRQ_DMA2 22 /* DMA controller channel 2 */
#define IRQ_DMA3 23 /* DMA controller channel 3 */
#define IRQ_DMA4 24 /* DMA controller channel 4 */
#define IRQ_DMA5 25 /* DMA controller channel 5 */
#define IRQ_OST0 26 /* OS Timer match 0 */
#define IRQ_OST1 27 /* OS Timer match 1 */
#define IRQ_OST2 28 /* OS Timer match 2 */
#define IRQ_OST3 29 /* OS Timer match 3 */
#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */
#define IRQ_RTCAlrm 31 /* RTC Alarm */
#define IRQ_GPIO11 32
#define IRQ_GPIO12 33
#define IRQ_GPIO13 34
#define IRQ_GPIO14 35
#define IRQ_GPIO15 36
#define IRQ_GPIO16 37
#define IRQ_GPIO17 38
#define IRQ_GPIO18 39
#define IRQ_GPIO19 40
#define IRQ_GPIO20 41
#define IRQ_GPIO21 42
#define IRQ_GPIO22 43
#define IRQ_GPIO23 44
#define IRQ_GPIO24 45
#define IRQ_GPIO25 46
#define IRQ_GPIO26 47
#define IRQ_GPIO27 48
/*
* The next 16 interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
* these. If you need more, increase IRQ_BOARD_END, but keep it
* within sensible limits. IRQs 49 to 64 are available.
*/
#define IRQ_BOARD_START 49
#define IRQ_BOARD_END 65
#define IRQ_SA1111_START (IRQ_BOARD_END)
#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
#define SSPXMTINT (IRQ_BOARD_END + 24)
#define SSPRCVINT (IRQ_BOARD_END + 25)
#define SSPROR (IRQ_BOARD_END + 26)
#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
#define AUDTFSR (IRQ_BOARD_END + 36)
#define AUDRFSR (IRQ_BOARD_END + 37)
#define AUDTUR (IRQ_BOARD_END + 38)
#define AUDROR (IRQ_BOARD_END + 39)
#define AUDDTS (IRQ_BOARD_END + 40)
#define AUDRDD (IRQ_BOARD_END + 41)
#define AUDSTO (IRQ_BOARD_END + 42)
#define IRQ_USBPWR (IRQ_BOARD_END + 43)
#define IRQ_HCIM (IRQ_BOARD_END + 44)
#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
#define IRQ_LOCOMO_START (IRQ_BOARD_END)
#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
/*
* Figure out the MAX IRQ number.
*
* If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
* If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
* Otherwise, we have the standard IRQs only.
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
#elif defined(CONFIG_SA1100_H3800)
#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
/*
* Board specific IRQs. Define them here.
* Do not surround them with ifdefs.
*/
#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)
/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
#define H3800_KPIO_IRQ_COUNT 9
#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
#define H3800_GPIO_IRQ_COUNT 5
View Git Blame Copy Permalink