2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/drivers/net/wireless/orinoco_pci.h
Pavel Roskin 461c078c9c [PATCH] orinoco: don't put PCI resource data to the network device
The resource data in the network device is intended for ISA and other
older busses, but not for PCI.  Don't put PCI data there.  Don't (ab)use
the network device for keeping the IRQ number.

Retire orinoco_pci_setup_netdev(), and print some minimal information to
the kernel log instead, identifying the network device and the driver
mostly to identify problems at startup.  Scripts should rely on sysfs.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-05 17:10:41 -04:00

105 lines
2.2 KiB
C

/* orinoco_pci.h
*
* Common code for all Orinoco drivers for PCI devices, including
* both native PCI and PCMCIA-to-PCI bridges.
*
* Copyright (C) 2005, Pavel Roskin.
* See orinoco.c for license.
*/
#ifndef _ORINOCO_PCI_H
#define _ORINOCO_PCI_H
#include <linux/netdevice.h>
/* Driver specific data */
struct orinoco_pci_card {
void __iomem *bridge_io;
void __iomem *attr_io;
};
#ifdef CONFIG_PM
static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct orinoco_private *priv = netdev_priv(dev);
unsigned long flags;
int err;
err = orinoco_lock(priv, &flags);
if (err) {
printk(KERN_ERR "%s: cannot lock hardware for suspend\n",
dev->name);
return err;
}
err = __orinoco_down(dev);
if (err)
printk(KERN_WARNING "%s: error %d bringing interface down "
"for suspend\n", dev->name, err);
netif_device_detach(dev);
priv->hw_unavailable++;
orinoco_unlock(priv, &flags);
free_irq(pdev->irq, dev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static int orinoco_pci_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct orinoco_private *priv = netdev_priv(dev);
unsigned long flags;
int err;
pci_set_power_state(pdev, 0);
pci_enable_device(pdev);
pci_restore_state(pdev);
err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
dev->name, dev);
if (err) {
printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
dev->name);
pci_disable_device(pdev);
return -EBUSY;
}
err = orinoco_reinit_firmware(dev);
if (err) {
printk(KERN_ERR "%s: error %d re-initializing firmware "
"on resume\n", dev->name, err);
return err;
}
spin_lock_irqsave(&priv->lock, flags);
netif_device_attach(dev);
priv->hw_unavailable--;
if (priv->open && (! priv->hw_unavailable)) {
err = __orinoco_up(dev);
if (err)
printk(KERN_ERR "%s: Error %d restarting card on resume\n",
dev->name, err);
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
#else
#define orinoco_pci_suspend NULL
#define orinoco_pci_resume NULL
#endif
#endif /* _ORINOCO_PCI_H */