mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
4653f22e9a
This was missed in the upstreaming process. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
78 lines
2.3 KiB
Plaintext
78 lines
2.3 KiB
Plaintext
Broadcom VC4 (VideoCore4) GPU
|
|
|
|
The VC4 device present on the Raspberry Pi includes a display system
|
|
with HDMI output and the HVS (Hardware Video Scaler) for compositing
|
|
display planes.
|
|
|
|
Required properties for VC4:
|
|
- compatible: Should be "brcm,bcm2835-vc4"
|
|
|
|
Required properties for Pixel Valve:
|
|
- compatible: Should be one of "brcm,bcm2835-pixelvalve0",
|
|
"brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2"
|
|
- reg: Physical base address and length of the PV's registers
|
|
- interrupts: The interrupt number
|
|
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
|
|
|
|
Required properties for HVS:
|
|
- compatible: Should be "brcm,bcm2835-hvs"
|
|
- reg: Physical base address and length of the HVS's registers
|
|
- interrupts: The interrupt number
|
|
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
|
|
|
|
Required properties for HDMI
|
|
- compatible: Should be "brcm,bcm2835-hdmi"
|
|
- reg: Physical base address and length of the two register ranges
|
|
("HDMI" and "HD", in that order)
|
|
- interrupts: The interrupt numbers
|
|
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
|
|
- ddc: phandle of the I2C controller used for DDC EDID probing
|
|
- clocks: a) hdmi: The HDMI state machine clock
|
|
b) pixel: The pixel clock.
|
|
|
|
Optional properties for HDMI:
|
|
- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear
|
|
as an interrupt/status bit in the HDMI controller
|
|
itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt
|
|
|
|
Required properties for V3D:
|
|
- compatible: Should be "brcm,bcm2835-v3d"
|
|
- reg: Physical base address and length of the V3D's registers
|
|
- interrupts: The interrupt number
|
|
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
|
|
|
|
Example:
|
|
pixelvalve@7e807000 {
|
|
compatible = "brcm,bcm2835-pixelvalve2";
|
|
reg = <0x7e807000 0x100>;
|
|
interrupts = <2 10>; /* pixelvalve */
|
|
};
|
|
|
|
hvs@7e400000 {
|
|
compatible = "brcm,bcm2835-hvs";
|
|
reg = <0x7e400000 0x6000>;
|
|
interrupts = <2 1>;
|
|
};
|
|
|
|
hdmi: hdmi@7e902000 {
|
|
compatible = "brcm,bcm2835-hdmi";
|
|
reg = <0x7e902000 0x600>,
|
|
<0x7e808000 0x100>;
|
|
interrupts = <2 8>, <2 9>;
|
|
ddc = <&i2c2>;
|
|
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
|
clocks = <&clocks BCM2835_PLLH_PIX>,
|
|
<&clocks BCM2835_CLOCK_HSM>;
|
|
clock-names = "pixel", "hdmi";
|
|
};
|
|
|
|
v3d: v3d@7ec00000 {
|
|
compatible = "brcm,bcm2835-v3d";
|
|
reg = <0x7ec00000 0x1000>;
|
|
interrupts = <1 10>;
|
|
};
|
|
|
|
vc4: gpu {
|
|
compatible = "brcm,bcm2835-vc4";
|
|
};
|