renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-30 16:13:54 +08:00
Code
5eb30790d4
linux-next/sound/oss/dmasound/dmasound_core.c
Rusty Russell 8d3b33f67f [PATCH] Remove MODULE_PARM 
MODULE_PARM was actually breaking: recent gcc version optimize them out as
unused.  It's time to replace the last users, which are generally in the
most unloved drivers anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:52 -08:00

1830 lines
51 KiB
C
Raw Blame History

/*
* linux/sound/oss/dmasound/dmasound_core.c
*
*
* OSS/Free compatible Atari TT/Falcon and Amiga DMA sound driver for
* Linux/m68k
* Extended to support Power Macintosh for Linux/ppc by Paul Mackerras
*
* (c) 1995 by Michael Schlueter & Michael Marte
*
* Michael Schlueter (michael@duck.syd.de) did the basic structure of the VFS
* interface and the u-law to signed byte conversion.
*
* Michael Marte (marte@informatik.uni-muenchen.de) did the sound queue,
* /dev/mixer, /dev/sndstat and complemented the VFS interface. He would like
* to thank:
* - Michael Schlueter for initial ideas and documentation on the MFP and
* the DMA sound hardware.
* - Therapy? for their CD 'Troublegum' which really made me rock.
*
* /dev/sndstat is based on code by Hannu Savolainen, the author of the
* VoxWare family of drivers.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*
* History:
*
* 1995/8/25 First release
*
* 1995/9/02 Roman Hodek:
* - Fixed atari_stram_alloc() call, the timer
* programming and several race conditions
* 1995/9/14 Roman Hodek:
* - After some discussion with Michael Schlueter,
* revised the interrupt disabling
* - Slightly speeded up U8->S8 translation by using
* long operations where possible
* - Added 4:3 interpolation for /dev/audio
*
* 1995/9/20 Torsten Scherer:
* - Fixed a bug in sq_write and changed /dev/audio
* converting to play at 12517Hz instead of 6258Hz.
*
* 1995/9/23 Torsten Scherer:
* - Changed sq_interrupt() and sq_play() to pre-program
* the DMA for another frame while there's still one
* running. This allows the IRQ response to be
* arbitrarily delayed and playing will still continue.
*
* 1995/10/14 Guenther Kelleter, Torsten Scherer:
* - Better support for Falcon audio (the Falcon doesn't
* raise an IRQ at the end of a frame, but at the
* beginning instead!). uses 'if (codec_dma)' in lots
* of places to simply switch between Falcon and TT
* code.
*
* 1995/11/06 Torsten Scherer:
* - Started introducing a hardware abstraction scheme
* (may perhaps also serve for Amigas?)
* - Can now play samples at almost all frequencies by
* means of a more generalized expand routine
* - Takes a good deal of care to cut data only at
* sample sizes
* - Buffer size is now a kernel runtime option
* - Implemented fsync() & several minor improvements
* Guenther Kelleter:
* - Useful hints and bug fixes
* - Cross-checked it for Falcons
*
* 1996/3/9 Geert Uytterhoeven:
* - Support added for Amiga, A-law, 16-bit little
* endian.
* - Unification to drivers/sound/dmasound.c.
*
* 1996/4/6 Martin Mitchell:
* - Updated to 1.3 kernel.
*
* 1996/6/13 Topi Kanerva:
* - Fixed things that were broken (mainly the amiga
* 14-bit routines)
* - /dev/sndstat shows now the real hardware frequency
* - The lowpass filter is disabled by default now
*
* 1996/9/25 Geert Uytterhoeven:
* - Modularization
*
* 1998/6/10 Andreas Schwab:
* - Converted to use sound_core
*
* 1999/12/28 Richard Zidlicky:
* - Added support for Q40
*
* 2000/2/27 Geert Uytterhoeven:
* - Clean up and split the code into 4 parts:
* o dmasound_core: machine-independent code
* o dmasound_atari: Atari TT and Falcon support
* o dmasound_awacs: Apple PowerMac support
* o dmasound_paula: Amiga support
*
* 2000/3/25 Geert Uytterhoeven:
* - Integration of dmasound_q40
* - Small clean ups
*
* 2001/01/26 [1.0] Iain Sandoe
* - make /dev/sndstat show revision & edition info.
* - since dmasound.mach.sq_setup() can fail on pmac
* its type has been changed to int and the returns
* are checked.
* [1.1] - stop missing translations from being called.
* 2001/02/08 [1.2] - remove unused translation tables & move machine-
* specific tables to low-level.
* - return correct info. for SNDCTL_DSP_GETFMTS.
* [1.3] - implement SNDCTL_DSP_GETCAPS fully.
* [1.4] - make /dev/sndstat text length usage deterministic.
* - make /dev/sndstat call to low-level
* dmasound.mach.state_info() pass max space to ll driver.
* - tidy startup banners and output info.
* [1.5] - tidy up a little (removed some unused #defines in
* dmasound.h)
* - fix up HAS_RECORD conditionalisation.
* - add record code in places it is missing...
* - change buf-sizes to bytes to allow < 1kb for pmac
* if user param entry is < 256 the value is taken to
* be in kb > 256 is taken to be in bytes.
* - make default buff/frag params conditional on
* machine to allow smaller values for pmac.
* - made the ioctls, read & write comply with the OSS
* rules on setting params.
* - added parsing of _setup() params for record.
* 2001/04/04 [1.6] - fix bug where sample rates higher than maximum were
* being reported as OK.
* - fix open() to return -EBUSY as per OSS doc. when
* audio is in use - this is independent of O_NOBLOCK.
* - fix bug where SNDCTL_DSP_POST was blocking.
*/
/* Record capability notes 30/01/2001:
* At present these observations apply only to pmac LL driver (the only one
* that can do record, at present). However, if other LL drivers for machines
* with record are added they may apply.
*
* The fragment parameters for the record and play channels are separate.
* However, if the driver is opened O_RDWR there is no way (in the current OSS
* API) to specify their values independently for the record and playback
* channels. Since the only common factor between the input & output is the
* sample rate (on pmac) it should be possible to open /dev/dspX O_WRONLY and
* /dev/dspY O_RDONLY. The input & output channels could then have different
* characteristics (other than the first that sets sample rate claiming the
* right to set it for ever). As it stands, the format, channels, number of
* bits & sample rate are assumed to be common. In the future perhaps these
* should be the responsibility of the LL driver - and then if a card really
* does not share items between record & playback they can be specified
* separately.
*/
/* Thread-safeness of shared_resources notes: 31/01/2001
* If the user opens O_RDWR and then splits record & play between two threads
* both of which inherit the fd - and then starts changing things from both
* - we will have difficulty telling.
*
* It's bad application coding - but ...
* TODO: think about how to sort this out... without bogging everything down in
* semaphores.
*
* Similarly, the OSS spec says "all changes to parameters must be between
* open() and the first read() or write(). - and a bit later on (by
* implication) "between SNDCTL_DSP_RESET and the first read() or write() after
* it". If the app is multi-threaded and this rule is broken between threads
* we will have trouble spotting it - and the fault will be rather obscure :-(
*
* We will try and put out at least a kmsg if we see it happen... but I think
* it will be quite hard to trap it with an -EXXX return... because we can't
* see the fault until after the damage is done.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sound.h>
#include <linux/init.h>
#include <linux/soundcard.h>
#include <linux/poll.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include "dmasound.h"
#define DMASOUND_CORE_REVISION 1
#define DMASOUND_CORE_EDITION 6
/*
* Declarations
*/
int dmasound_catchRadius = 0;
module_param(dmasound_catchRadius, int, 0);
static unsigned int numWriteBufs = DEFAULT_N_BUFFERS;
module_param(numWriteBufs, int, 0);
static unsigned int writeBufSize = DEFAULT_BUFF_SIZE ; /* in bytes */
module_param(writeBufSize, int, 0);
#ifdef HAS_RECORD
static unsigned int numReadBufs = DEFAULT_N_BUFFERS;
module_param(numReadBufs, int, 0);
static unsigned int readBufSize = DEFAULT_BUFF_SIZE; /* in bytes */
module_param(readBufSize, int, 0);
#endif
MODULE_LICENSE("GPL");
#ifdef MODULE
static int sq_unit = -1;
static int mixer_unit = -1;
static int state_unit = -1;
static int irq_installed;
#endif /* MODULE */
/* software implemented recording volume! */
uint software_input_volume = SW_INPUT_VOLUME_SCALE * SW_INPUT_VOLUME_DEFAULT;
EXPORT_SYMBOL(software_input_volume);
/* control over who can modify resources shared between play/record */
static mode_t shared_resource_owner;
static int shared_resources_initialised;
/*
* Mid level stuff
*/
struct sound_settings dmasound = { .lock = SPIN_LOCK_UNLOCKED };
static inline void sound_silence(void)
{
dmasound.mach.silence(); /* _MUST_ stop DMA */
}
static inline int sound_set_format(int format)
{
return dmasound.mach.setFormat(format);
}
static int sound_set_speed(int speed)
{
if (speed < 0)
return dmasound.soft.speed;
/* trap out-of-range speed settings.
at present we allow (arbitrarily) low rates - using soft
up-conversion - but we can't allow > max because there is
no soft down-conversion.
*/
if (dmasound.mach.max_dsp_speed &&
(speed > dmasound.mach.max_dsp_speed))
speed = dmasound.mach.max_dsp_speed ;
dmasound.soft.speed = speed;
if (dmasound.minDev == SND_DEV_DSP)
dmasound.dsp.speed = dmasound.soft.speed;
return dmasound.soft.speed;
}
static int sound_set_stereo(int stereo)
{
if (stereo < 0)
return dmasound.soft.stereo;
stereo = !!stereo; /* should be 0 or 1 now */
dmasound.soft.stereo = stereo;
if (dmasound.minDev == SND_DEV_DSP)
dmasound.dsp.stereo = stereo;
return stereo;
}
static ssize_t sound_copy_translate(TRANS *trans, const u_char __user *userPtr,
size_t userCount, u_char frame[],
ssize_t *frameUsed, ssize_t frameLeft)
{
ssize_t (*ct_func)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
switch (dmasound.soft.format) {
case AFMT_MU_LAW:
ct_func = trans->ct_ulaw;
break;
case AFMT_A_LAW:
ct_func = trans->ct_alaw;
break;
case AFMT_S8:
ct_func = trans->ct_s8;
break;
case AFMT_U8:
ct_func = trans->ct_u8;
break;
case AFMT_S16_BE:
ct_func = trans->ct_s16be;
break;
case AFMT_U16_BE:
ct_func = trans->ct_u16be;
break;
case AFMT_S16_LE:
ct_func = trans->ct_s16le;
break;
case AFMT_U16_LE:
ct_func = trans->ct_u16le;
break;
default:
return 0;
}
/* if the user has requested a non-existent translation don't try
to call it but just return 0 bytes moved
*/
if (ct_func)
return ct_func(userPtr, userCount, frame, frameUsed, frameLeft);
return 0;
}
/*
* /dev/mixer abstraction
*/
static struct {
int busy;
int modify_counter;
} mixer;
static int mixer_open(struct inode *inode, struct file *file)
{
if (!try_module_get(dmasound.mach.owner))
return -ENODEV;
mixer.busy = 1;
return 0;
}
static int mixer_release(struct inode *inode, struct file *file)
{
lock_kernel();
mixer.busy = 0;
module_put(dmasound.mach.owner);
unlock_kernel();
return 0;
}
static int mixer_ioctl(struct inode *inode, struct file *file, u_int cmd,
u_long arg)
{
if (_SIOC_DIR(cmd) & _SIOC_WRITE)
mixer.modify_counter++;
switch (cmd) {
case OSS_GETVERSION:
return IOCTL_OUT(arg, SOUND_VERSION);
case SOUND_MIXER_INFO:
{
mixer_info info;
memset(&info, 0, sizeof(info));
strlcpy(info.id, dmasound.mach.name2, sizeof(info.id));
strlcpy(info.name, dmasound.mach.name2, sizeof(info.name));
info.modify_counter = mixer.modify_counter;
if (copy_to_user((void __user *)arg, &info, sizeof(info)))
return -EFAULT;
return 0;
}
}
if (dmasound.mach.mixer_ioctl)
return dmasound.mach.mixer_ioctl(cmd, arg);
return -EINVAL;
}
static struct file_operations mixer_fops =
{
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = mixer_ioctl,
.open = mixer_open,
.release = mixer_release,
};
static void mixer_init(void)
{
#ifndef MODULE
int mixer_unit;
#endif
mixer_unit = register_sound_mixer(&mixer_fops, -1);
if (mixer_unit < 0)
return;
mixer.busy = 0;
dmasound.treble = 0;
dmasound.bass = 0;
if (dmasound.mach.mixer_init)
dmasound.mach.mixer_init();
}
/*
* Sound queue stuff, the heart of the driver
*/
struct sound_queue dmasound_write_sq;
static void sq_reset_output(void) ;
#ifdef HAS_RECORD
struct sound_queue dmasound_read_sq;
static void sq_reset_input(void) ;
#endif
static int sq_allocate_buffers(struct sound_queue *sq, int num, int size)
{
int i;
if (sq->buffers)
return 0;
sq->numBufs = num;
sq->bufSize = size;
sq->buffers = kmalloc (num * sizeof(char *), GFP_KERNEL);
if (!sq->buffers)
return -ENOMEM;
for (i = 0; i < num; i++) {
sq->buffers[i] = dmasound.mach.dma_alloc(size, GFP_KERNEL);
if (!sq->buffers[i]) {
while (i--)
dmasound.mach.dma_free(sq->buffers[i], size);
kfree(sq->buffers);
sq->buffers = NULL;
return -ENOMEM;
}
}
return 0;
}
static void sq_release_buffers(struct sound_queue *sq)
{
int i;
if (sq->buffers) {
for (i = 0; i < sq->numBufs; i++)
dmasound.mach.dma_free(sq->buffers[i], sq->bufSize);
kfree(sq->buffers);
sq->buffers = NULL;
}
}
static int sq_setup(struct sound_queue *sq)
{
int (*setup_func)(void) = NULL;
int hard_frame ;
if (sq->locked) { /* are we already set? - and not changeable */
#ifdef DEBUG_DMASOUND
printk("dmasound_core: tried to sq_setup a locked queue\n") ;
#endif
return -EINVAL ;
}
sq->locked = 1 ; /* don't think we have a race prob. here _check_ */
/* make sure that the parameters are set up
This should have been done already...
*/
dmasound.mach.init();
/* OK. If the user has set fragment parameters explicitly, then we
should leave them alone... as long as they are valid.
Invalid user fragment params can occur if we allow the whole buffer
to be used when the user requests the fragments sizes (with no soft
x-lation) and then the user subsequently sets a soft x-lation that
requires increased internal buffering.
Othwerwise (if the user did not set them) OSS says that we should
select frag params on the basis of 0.5 s output & 0.1 s input
latency. (TODO. For now we will copy in the defaults.)
*/
if (sq->user_frags <= 0) {
sq->max_count = sq->numBufs ;
sq->max_active = sq->numBufs ;
sq->block_size = sq->bufSize;
/* set up the user info */
sq->user_frags = sq->numBufs ;
sq->user_frag_size = sq->bufSize ;
sq->user_frag_size *=
(dmasound.soft.size * (dmasound.soft.stereo+1) ) ;
sq->user_frag_size /=
(dmasound.hard.size * (dmasound.hard.stereo+1) ) ;
} else {
/* work out requested block size */
sq->block_size = sq->user_frag_size ;
sq->block_size *=
(dmasound.hard.size * (dmasound.hard.stereo+1) ) ;
sq->block_size /=
(dmasound.soft.size * (dmasound.soft.stereo+1) ) ;
/* the user wants to write frag-size chunks */
sq->block_size *= dmasound.hard.speed ;
sq->block_size /= dmasound.soft.speed ;
/* this only works for size values which are powers of 2 */
hard_frame =
(dmasound.hard.size * (dmasound.hard.stereo+1))/8 ;
sq->block_size += (hard_frame - 1) ;
sq->block_size &= ~(hard_frame - 1) ; /* make sure we are aligned */
/* let's just check for obvious mistakes */
if ( sq->block_size <= 0 || sq->block_size > sq->bufSize) {
#ifdef DEBUG_DMASOUND
printk("dmasound_core: invalid frag size (user set %d)\n", sq->user_frag_size) ;
#endif
sq->block_size = sq->bufSize ;
}
if ( sq->user_frags <= sq->numBufs ) {
sq->max_count = sq->user_frags ;
/* if user has set max_active - then use it */
sq->max_active = (sq->max_active <= sq->max_count) ?
sq->max_active : sq->max_count ;
} else {
#ifdef DEBUG_DMASOUND
printk("dmasound_core: invalid frag count (user set %d)\n", sq->user_frags) ;
#endif
sq->max_count =
sq->max_active = sq->numBufs ;
}
}
sq->front = sq->count = sq->rear_size = 0;
sq->syncing = 0;
sq->active = 0;
if (sq == &write_sq) {
sq->rear = -1;
setup_func = dmasound.mach.write_sq_setup;
}
#ifdef HAS_RECORD
else {
sq->rear = 0;
setup_func = dmasound.mach.read_sq_setup;
}
#endif
if (setup_func)
return setup_func();
return 0 ;
}
static inline void sq_play(void)
{
dmasound.mach.play();
}
static ssize_t sq_write(struct file *file, const char __user *src, size_t uLeft,
loff_t *ppos)
{
ssize_t uWritten = 0;
u_char *dest;
ssize_t uUsed = 0, bUsed, bLeft;
unsigned long flags ;
/* ++TeSche: Is something like this necessary?
* Hey, that's an honest question! Or does any other part of the
* filesystem already checks this situation? I really don't know.
*/
if (uLeft == 0)
return 0;
/* implement any changes we have made to the soft/hard params.
this is not satisfactory really, all we have done up to now is to
say what we would like - there hasn't been any real checking of capability
*/
if (shared_resources_initialised == 0) {
dmasound.mach.init() ;
shared_resources_initialised = 1 ;
}
/* set up the sq if it is not already done. This may seem a dumb place
to do it - but it is what OSS requires. It means that write() can
return memory allocation errors. To avoid this possibility use the
GETBLKSIZE or GETOSPACE ioctls (after you've fiddled with all the
params you want to change) - these ioctls also force the setup.
*/
if (write_sq.locked == 0) {
if ((uWritten = sq_setup(&write_sq)) < 0) return uWritten ;
uWritten = 0 ;
}
/* FIXME: I think that this may be the wrong behaviour when we get strapped
for time and the cpu is close to being (or actually) behind in sending data.
- because we've lost the time that the N samples, already in the buffer,
would have given us to get here with the next lot from the user.
*/
/* The interrupt doesn't start to play the last, incomplete frame.
* Thus we can append to it without disabling the interrupts! (Note
* also that write_sq.rear isn't affected by the interrupt.)
*/
/* as of 1.6 this behaviour changes if SNDCTL_DSP_POST has been issued:
this will mimic the behaviour of syncing and allow the sq_play() to
queue a partial fragment. Since sq_play() may/will be called from
the IRQ handler - at least on Pmac we have to deal with it.
The strategy - possibly not optimum - is to kill _POST status if we
get here. This seems, at least, reasonable - in the sense that POST
is supposed to indicate that we might not write before the queue
is drained - and if we get here in time then it does not apply.
*/
spin_lock_irqsave(&dmasound.lock, flags);
write_sq.syncing &= ~2 ; /* take out POST status */
spin_unlock_irqrestore(&dmasound.lock, flags);
if (write_sq.count > 0 &&
(bLeft = write_sq.block_size-write_sq.rear_size) > 0) {
dest = write_sq.buffers[write_sq.rear];
bUsed = write_sq.rear_size;
uUsed = sound_copy_translate(dmasound.trans_write, src, uLeft,
dest, &bUsed, bLeft);
if (uUsed <= 0)
return uUsed;
src += uUsed;
uWritten += uUsed;
uLeft = (uUsed <= uLeft) ? (uLeft - uUsed) : 0 ; /* paranoia */
write_sq.rear_size = bUsed;
}
while (uLeft) {
while (write_sq.count >= write_sq.max_active) {
sq_play();
if (write_sq.open_mode & O_NONBLOCK)
return uWritten > 0 ? uWritten : -EAGAIN;
SLEEP(write_sq.action_queue);
if (signal_pending(current))
return uWritten > 0 ? uWritten : -EINTR;
}
/* Here, we can avoid disabling the interrupt by first
* copying and translating the data, and then updating
* the write_sq variables. Until this is done, the interrupt
* won't see the new frame and we can work on it
* undisturbed.
*/
dest = write_sq.buffers[(write_sq.rear+1) % write_sq.max_count];
bUsed = 0;
bLeft = write_sq.block_size;
uUsed = sound_copy_translate(dmasound.trans_write, src, uLeft,
dest, &bUsed, bLeft);
if (uUsed <= 0)
break;
src += uUsed;
uWritten += uUsed;
uLeft = (uUsed <= uLeft) ? (uLeft - uUsed) : 0 ; /* paranoia */
if (bUsed) {
write_sq.rear = (write_sq.rear+1) % write_sq.max_count;
write_sq.rear_size = bUsed;
write_sq.count++;
}
} /* uUsed may have been 0 */
sq_play();
return uUsed < 0? uUsed: uWritten;
}
static unsigned int sq_poll(struct file *file, struct poll_table_struct *wait)
{
unsigned int mask = 0;
int retVal;
if (write_sq.locked == 0) {
if ((retVal = sq_setup(&write_sq)) < 0)
return retVal;
return 0;
}
if (file->f_mode & FMODE_WRITE )
poll_wait(file, &write_sq.action_queue, wait);
#ifdef HAS_RECORD
if (file->f_mode & FMODE_READ)
poll_wait(file, &read_sq.action_queue, wait);
if (file->f_mode & FMODE_READ)
if (read_sq.block_size - read_sq.rear_size > 0)
mask |= POLLIN | POLLRDNORM;
#endif
if (file->f_mode & FMODE_WRITE)
if (write_sq.count < write_sq.max_active || write_sq.block_size - write_sq.rear_size > 0)
mask |= POLLOUT | POLLWRNORM;
return mask;
}
#ifdef HAS_RECORD
/*
* Here is how the values are used for reading.
* The value 'active' simply indicates the DMA is running. This is done
* so the driver semantics are DMA starts when the first read is posted.
* The value 'front' indicates the buffer we should next send to the user.
* The value 'rear' indicates the buffer the DMA is currently filling.
* When 'front' == 'rear' the buffer "ring" is empty (we always have an
* empty available). The 'rear_size' is used to track partial offsets
* into the buffer we are currently returning to the user.
* This level (> [1.5]) doesn't care what strategy the LL driver uses with
* DMA on over-run. It can leave it running (and keep active == 1) or it
* can kill it and set active == 0 in which case this routine will spot
* it and restart the DMA.
*/
static ssize_t sq_read(struct file *file, char __user *dst, size_t uLeft,
loff_t *ppos)
{
ssize_t uRead, bLeft, bUsed, uUsed;
if (uLeft == 0)
return 0;
/* cater for the compatibility mode - record compiled in but no LL */
if (dmasound.mach.record == NULL)
return -EINVAL ;
/* see comment in sq_write()
*/
if( shared_resources_initialised == 0) {
dmasound.mach.init() ;
shared_resources_initialised = 1 ;
}
/* set up the sq if it is not already done. see comments in sq_write().
*/
if (read_sq.locked == 0) {
if ((uRead = sq_setup(&read_sq)) < 0)
return uRead ;
}
uRead = 0;
/* Move what the user requests, depending upon other options.
*/
while (uLeft > 0) {
/* we happened to get behind and the LL driver killed DMA
then we should set it going again. This also sets it
going the first time through.
*/
if ( !read_sq.active )
dmasound.mach.record();
/* When front == rear, the DMA is not done yet.
*/
while (read_sq.front == read_sq.rear) {
if (read_sq.open_mode & O_NONBLOCK) {
return uRead > 0 ? uRead : -EAGAIN;
}
SLEEP(read_sq.action_queue);
if (signal_pending(current))
return uRead > 0 ? uRead : -EINTR;
}
/* The amount we move is either what is left in the
* current buffer or what the user wants.
*/
bLeft = read_sq.block_size - read_sq.rear_size;
bUsed = read_sq.rear_size;
uUsed = sound_copy_translate(dmasound.trans_read, dst, uLeft,
read_sq.buffers[read_sq.front],
&bUsed, bLeft);
if (uUsed <= 0)
return uUsed;
dst += uUsed;
uRead += uUsed;
uLeft -= uUsed;
read_sq.rear_size += bUsed;
if (read_sq.rear_size >= read_sq.block_size) {
read_sq.rear_size = 0;
read_sq.front++;
if (read_sq.front >= read_sq.max_active)
read_sq.front = 0;
}
}
return uRead;
}
#endif /* HAS_RECORD */
static inline void sq_init_waitqueue(struct sound_queue *sq)
{
init_waitqueue_head(&sq->action_queue);
init_waitqueue_head(&sq->open_queue);
init_waitqueue_head(&sq->sync_queue);
sq->busy = 0;
}
#if 0 /* blocking open() */
static inline void sq_wake_up(struct sound_queue *sq, struct file *file,
mode_t mode)
{
if (file->f_mode & mode) {
sq->busy = 0; /* CHECK: IS THIS OK??? */
WAKE_UP(sq->open_queue);
}
}
#endif
static int sq_open2(struct sound_queue *sq, struct file *file, mode_t mode,
int numbufs, int bufsize)
{
int rc = 0;
if (file->f_mode & mode) {
if (sq->busy) {
#if 0 /* blocking open() */
rc = -EBUSY;
if (file->f_flags & O_NONBLOCK)
return rc;
rc = -EINTR;
while (sq->busy) {
SLEEP(sq->open_queue);
if (signal_pending(current))
return rc;
}
rc = 0;
#else
/* OSS manual says we will return EBUSY regardless
of O_NOBLOCK.
*/
return -EBUSY ;
#endif
}
sq->busy = 1; /* Let's play spot-the-race-condition */
/* allocate the default number & size of buffers.
(i.e. specified in _setup() or as module params)
can't be changed at the moment - but _could_ be perhaps
in the setfragments ioctl.
*/
if (( rc = sq_allocate_buffers(sq, numbufs, bufsize))) {
#if 0 /* blocking open() */
sq_wake_up(sq, file, mode);
#else
sq->busy = 0 ;
#endif
return rc;
}
sq->open_mode = file->f_mode;
}
return rc;
}
#define write_sq_init_waitqueue() sq_init_waitqueue(&write_sq)
#if 0 /* blocking open() */
#define write_sq_wake_up(file) sq_wake_up(&write_sq, file, FMODE_WRITE)
#endif
#define write_sq_release_buffers() sq_release_buffers(&write_sq)
#define write_sq_open(file) \
sq_open2(&write_sq, file, FMODE_WRITE, numWriteBufs, writeBufSize )
#ifdef HAS_RECORD
#define read_sq_init_waitqueue() sq_init_waitqueue(&read_sq)
#if 0 /* blocking open() */
#define read_sq_wake_up(file) sq_wake_up(&read_sq, file, FMODE_READ)
#endif
#define read_sq_release_buffers() sq_release_buffers(&read_sq)
#define read_sq_open(file) \
sq_open2(&read_sq, file, FMODE_READ, numReadBufs, readBufSize )
#else
#define read_sq_init_waitqueue() do {} while (0)
#if 0 /* blocking open() */
#define read_sq_wake_up(file) do {} while (0)
#endif
#define read_sq_release_buffers() do {} while (0)
#define sq_reset_input() do {} while (0)
#endif
static int sq_open(struct inode *inode, struct file *file)
{
int rc;
if (!try_module_get(dmasound.mach.owner))
return -ENODEV;
rc = write_sq_open(file); /* checks the f_mode */
if (rc)
goto out;
#ifdef HAS_RECORD
if (dmasound.mach.record) {
rc = read_sq_open(file); /* checks the f_mode */
if (rc)
goto out;
} else { /* no record function installed; in compat mode */
if (file->f_mode & FMODE_READ) {
/* TODO: if O_RDWR, release any resources grabbed by write part */
rc = -ENXIO;
goto out;
}
}
#else /* !HAS_RECORD */
if (file->f_mode & FMODE_READ) {
/* TODO: if O_RDWR, release any resources grabbed by write part */
rc = -ENXIO ; /* I think this is what is required by open(2) */
goto out;
}
#endif /* HAS_RECORD */
if (dmasound.mach.sq_open)
dmasound.mach.sq_open(file->f_mode);
/* CHECK whether this is sensible - in the case that dsp0 could be opened
O_RDONLY and dsp1 could be opened O_WRONLY
*/
dmasound.minDev = iminor(inode) & 0x0f;
/* OK. - we should make some attempt at consistency. At least the H'ware
options should be set with a valid mode. We will make it that the LL
driver must supply defaults for hard & soft params.
*/
if (shared_resource_owner == 0) {
/* you can make this AFMT_U8/mono/8K if you want to mimic old
OSS behaviour - while we still have soft translations ;-) */
dmasound.soft = dmasound.mach.default_soft ;
dmasound.dsp = dmasound.mach.default_soft ;
dmasound.hard = dmasound.mach.default_hard ;
}
#ifndef DMASOUND_STRICT_OSS_COMPLIANCE
/* none of the current LL drivers can actually do this "native" at the moment
OSS does not really require us to supply /dev/audio if we can't do it.
*/
if (dmasound.minDev == SND_DEV_AUDIO) {
sound_set_speed(8000);
sound_set_stereo(0);
sound_set_format(AFMT_MU_LAW);
}
#endif
return 0;
out:
module_put(dmasound.mach.owner);
return rc;
}
static void sq_reset_output(void)
{
sound_silence(); /* this _must_ stop DMA, we might be about to lose the buffers */
write_sq.active = 0;
write_sq.count = 0;
write_sq.rear_size = 0;
/* write_sq.front = (write_sq.rear+1) % write_sq.max_count;*/
write_sq.front = 0 ;
write_sq.rear = -1 ; /* same as for set-up */
/* OK - we can unlock the parameters and fragment settings */
write_sq.locked = 0 ;
write_sq.user_frags = 0 ;
write_sq.user_frag_size = 0 ;
}
#ifdef HAS_RECORD
static void sq_reset_input(void)
{
if (dmasound.mach.record && read_sq.active) {
if (dmasound.mach.abort_read) { /* this routine must really be present */
read_sq.syncing = 1 ;
/* this can use the read_sq.sync_queue to sleep if
necessary - it should not return until DMA
is really stopped - because we might deallocate
the buffers as the next action...
*/
dmasound.mach.abort_read() ;
} else {
printk(KERN_ERR
"dmasound_core: %s has no abort_read()!! all bets are off\n",
dmasound.mach.name) ;
}
}
read_sq.syncing =
read_sq.active =
read_sq.front =
read_sq.count =
read_sq.rear = 0 ;
/* OK - we can unlock the parameters and fragment settings */
read_sq.locked = 0 ;
read_sq.user_frags = 0 ;
read_sq.user_frag_size = 0 ;
}
#endif
static void sq_reset(void)
{
sq_reset_output() ;
sq_reset_input() ;
/* we could consider resetting the shared_resources_owner here... but I
think it is probably still rather non-obvious to application writer
*/
/* we release everything else though */
shared_resources_initialised = 0 ;
}
static int sq_fsync(struct file *filp, struct dentry *dentry)
{
int rc = 0;
int timeout = 5;
write_sq.syncing |= 1;
sq_play(); /* there may be an incomplete frame waiting */
while (write_sq.active) {
SLEEP(write_sq.sync_queue);
if (signal_pending(current)) {
/* While waiting for audio output to drain, an
* interrupt occurred. Stop audio output immediately
* and clear the queue. */
sq_reset_output();
rc = -EINTR;
break;
}
if (!--timeout) {
printk(KERN_WARNING "dmasound: Timeout draining output\n");
sq_reset_output();
rc = -EIO;
break;
}
}
/* flag no sync regardless of whether we had a DSP_POST or not */
write_sq.syncing = 0 ;
return rc;
}
static int sq_release(struct inode *inode, struct file *file)
{
int rc = 0;
lock_kernel();
#ifdef HAS_RECORD
/* probably best to do the read side first - so that time taken to do it
overlaps with playing any remaining output samples.
*/
if (file->f_mode & FMODE_READ) {
sq_reset_input() ; /* make sure dma is stopped and all is quiet */
read_sq_release_buffers();
read_sq.busy = 0;
}
#endif
if (file->f_mode & FMODE_WRITE) {
if (write_sq.busy)
rc = sq_fsync(file, file->f_dentry);
sq_reset_output() ; /* make sure dma is stopped and all is quiet */
write_sq_release_buffers();
write_sq.busy = 0;
}
if (file->f_mode & shared_resource_owner) { /* it's us that has them */
shared_resource_owner = 0 ;
shared_resources_initialised = 0 ;
dmasound.hard = dmasound.mach.default_hard ;
}
module_put(dmasound.mach.owner);
#if 0 /* blocking open() */
/* Wake up a process waiting for the queue being released.
* Note: There may be several processes waiting for a call
* to open() returning. */
/* Iain: hmm I don't understand this next comment ... */
/* There is probably a DOS atack here. They change the mode flag. */
/* XXX add check here,*/
read_sq_wake_up(file); /* checks f_mode */
write_sq_wake_up(file); /* checks f_mode */
#endif /* blocking open() */
unlock_kernel();
return rc;
}
/* here we see if we have a right to modify format, channels, size and so on
if no-one else has claimed it already then we do...
TODO: We might change this to mask O_RDWR such that only one or the other channel
is the owner - if we have problems.
*/
static int shared_resources_are_mine(mode_t md)
{
if (shared_resource_owner)
return (shared_resource_owner & md ) ;
else {
shared_resource_owner = md ;
return 1 ;
}
}
/* if either queue is locked we must deny the right to change shared params
*/
static int queues_are_quiescent(void)
{
#ifdef HAS_RECORD
if (dmasound.mach.record)
if (read_sq.locked)
return 0 ;
#endif
if (write_sq.locked)
return 0 ;
return 1 ;
}
/* check and set a queue's fragments per user's wishes...
we will check against the pre-defined literals and the actual sizes.
This is a bit fraught - because soft translations can mess with our
buffer requirements *after* this call - OSS says "call setfrags first"
*/
/* It is possible to replace all the -EINVAL returns with an override that
just puts the allowable value in. This may be what many OSS apps require
*/
static int set_queue_frags(struct sound_queue *sq, int bufs, int size)
{
if (sq->locked) {
#ifdef DEBUG_DMASOUND
printk("dmasound_core: tried to set_queue_frags on a locked queue\n") ;
#endif
return -EINVAL ;
}
if ((size < MIN_FRAG_SIZE) || (size > MAX_FRAG_SIZE))
return -EINVAL ;
size = (1<<size) ; /* now in bytes */
if (size > sq->bufSize)
return -EINVAL ; /* this might still not work */
if (bufs <= 0)
return -EINVAL ;
if (bufs > sq->numBufs) /* the user is allowed say "don't care" with 0x7fff */
bufs = sq->numBufs ;
/* there is, currently, no way to specify max_active separately
from max_count. This could be a LL driver issue - I guess
if there is a requirement for these values to be different then
we will have to pass that info. up to this level.
*/
sq->user_frags =
sq->max_active = bufs ;
sq->user_frag_size = size ;
return 0 ;
}
static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
u_long arg)
{
int val, result;
u_long fmt;
int data;
int size, nbufs;
audio_buf_info info;
switch (cmd) {
case SNDCTL_DSP_RESET:
sq_reset();
return 0;
break ;
case SNDCTL_DSP_GETFMTS:
fmt = dmasound.mach.hardware_afmts ; /* this is what OSS says.. */
return IOCTL_OUT(arg, fmt);
break ;
case SNDCTL_DSP_GETBLKSIZE:
/* this should tell the caller about bytes that the app can
read/write - the app doesn't care about our internal buffers.
We force sq_setup() here as per OSS 1.1 (which should
compute the values necessary).
Since there is no mechanism to specify read/write separately, for
fds opened O_RDWR, the write_sq values will, arbitrarily, overwrite
the read_sq ones.
*/
size = 0 ;
#ifdef HAS_RECORD
if (dmasound.mach.record && (file->f_mode & FMODE_READ)) {
if ( !read_sq.locked )
sq_setup(&read_sq) ; /* set params */
size = read_sq.user_frag_size ;
}
#endif
if (file->f_mode & FMODE_WRITE) {
if ( !write_sq.locked )
sq_setup(&write_sq) ;
size = write_sq.user_frag_size ;
}
return IOCTL_OUT(arg, size);
break ;
case SNDCTL_DSP_POST:
/* all we are going to do is to tell the LL that any
partial frags can be queued for output.
The LL will have to clear this flag when last output
is queued.
*/
write_sq.syncing |= 0x2 ;
sq_play() ;
return 0 ;
case SNDCTL_DSP_SYNC:
/* This call, effectively, has the same behaviour as SNDCTL_DSP_RESET
except that it waits for output to finish before resetting
everything - read, however, is killed imediately.
*/
result = 0 ;
if ((file->f_mode & FMODE_READ) && dmasound.mach.record)
sq_reset_input() ;
if (file->f_mode & FMODE_WRITE) {
result = sq_fsync(file, file->f_dentry);
sq_reset_output() ;
}
/* if we are the shared resource owner then release them */
if (file->f_mode & shared_resource_owner)
shared_resources_initialised = 0 ;
return result ;
break ;
case SOUND_PCM_READ_RATE:
return IOCTL_OUT(arg, dmasound.soft.speed);
case SNDCTL_DSP_SPEED:
/* changing this on the fly will have weird effects on the sound.
Where there are rate conversions implemented in soft form - it
will cause the _ctx_xxx() functions to be substituted.
However, there doesn't appear to be any reason to dis-allow it from
a driver pov.
*/
if (shared_resources_are_mine(file->f_mode)) {
IOCTL_IN(arg, data);
data = sound_set_speed(data) ;
shared_resources_initialised = 0 ;
return IOCTL_OUT(arg, data);
} else
return -EINVAL ;
break ;
/* OSS says these next 4 actions are undefined when the device is
busy/active - we will just return -EINVAL.
To be allowed to change one - (a) you have to own the right
(b) the queue(s) must be quiescent
*/
case SNDCTL_DSP_STEREO:
if (shared_resources_are_mine(file->f_mode) &&
queues_are_quiescent()) {
IOCTL_IN(arg, data);
shared_resources_initialised = 0 ;
return IOCTL_OUT(arg, sound_set_stereo(data));
} else
return -EINVAL ;
break ;
case SOUND_PCM_WRITE_CHANNELS:
if (shared_resources_are_mine(file->f_mode) &&
queues_are_quiescent()) {
IOCTL_IN(arg, data);
/* the user might ask for 20 channels, we will return 1 or 2 */
shared_resources_initialised = 0 ;
return IOCTL_OUT(arg, sound_set_stereo(data-1)+1);
} else
return -EINVAL ;
break ;
case SNDCTL_DSP_SETFMT:
if (shared_resources_are_mine(file->f_mode) &&
queues_are_quiescent()) {
int format;
IOCTL_IN(arg, data);
shared_resources_initialised = 0 ;
format = sound_set_format(data);
result = IOCTL_OUT(arg, format);
if (result < 0)
return result;
if (format != data && data != AFMT_QUERY)
return -EINVAL;
return 0;
} else
return -EINVAL ;
case SNDCTL_DSP_SUBDIVIDE:
return -EINVAL ;
case SNDCTL_DSP_SETFRAGMENT:
/* we can do this independently for the two queues - with the
proviso that for fds opened O_RDWR we cannot separate the
actions and both queues will be set per the last call.
NOTE: this does *NOT* actually set the queue up - merely
registers our intentions.
*/
IOCTL_IN(arg, data);
result = 0 ;
nbufs = (data >> 16) & 0x7fff ; /* 0x7fff is 'use maximum' */
size = data & 0xffff;
#ifdef HAS_RECORD
if ((file->f_mode & FMODE_READ) && dmasound.mach.record) {
result = set_queue_frags(&read_sq, nbufs, size) ;
if (result)
return result ;
}
#endif
if (file->f_mode & FMODE_WRITE) {
result = set_queue_frags(&write_sq, nbufs, size) ;
if (result)
return result ;
}
/* NOTE: this return value is irrelevant - OSS specifically says that
the value is 'random' and that the user _must_ check the actual
frags values using SNDCTL_DSP_GETBLKSIZE or similar */
return IOCTL_OUT(arg, data);
break ;
case SNDCTL_DSP_GETOSPACE:
/*
*/
if (file->f_mode & FMODE_WRITE) {
if ( !write_sq.locked )
sq_setup(&write_sq) ;
info.fragments = write_sq.max_active - write_sq.count;
info.fragstotal = write_sq.max_active;
info.fragsize = write_sq.user_frag_size;
info.bytes = info.fragments * info.fragsize;
if (copy_to_user((void __user *)arg, &info, sizeof(info)))
return -EFAULT;
return 0;
} else
return -EINVAL ;
break ;
case SNDCTL_DSP_GETCAPS:
val = dmasound.mach.capabilities & 0xffffff00;
return IOCTL_OUT(arg,val);
default:
return mixer_ioctl(inode, file, cmd, arg);
}
return -EINVAL;
}
static struct file_operations sq_fops =
{
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = sq_write,
.poll = sq_poll,
.ioctl = sq_ioctl,
.open = sq_open,
.release = sq_release,
#ifdef HAS_RECORD
.read = NULL /* default to no read for compat mode */
#endif
};
static int sq_init(void)
{
#ifndef MODULE
int sq_unit;
#endif
#ifdef HAS_RECORD
if (dmasound.mach.record)
sq_fops.read = sq_read ;
#endif
sq_unit = register_sound_dsp(&sq_fops, -1);
if (sq_unit < 0) {
printk(KERN_ERR "dmasound_core: couldn't register fops\n") ;
return sq_unit ;
}
write_sq_init_waitqueue();
read_sq_init_waitqueue();
/* These parameters will be restored for every clean open()
* in the case of multiple open()s (e.g. dsp0 & dsp1) they
* will be set so long as the shared resources have no owner.
*/
if (shared_resource_owner == 0) {
dmasound.soft = dmasound.mach.default_soft ;
dmasound.hard = dmasound.mach.default_hard ;
dmasound.dsp = dmasound.mach.default_soft ;
shared_resources_initialised = 0 ;
}
return 0 ;
}
/*
* /dev/sndstat
*/
/* we allow more space for record-enabled because there are extra output lines.
the number here must include the amount we are prepared to give to the low-level
driver.
*/
#ifdef HAS_RECORD
#define STAT_BUFF_LEN 1024
#else
#define STAT_BUFF_LEN 768
#endif
/* this is how much space we will allow the low-level driver to use
in the stat buffer. Currently, 2 * (80 character line + <NL>).
We do not police this (it is up to the ll driver to be honest).
*/
#define LOW_LEVEL_STAT_ALLOC 162
static struct {
int busy;
char buf[STAT_BUFF_LEN]; /* state.buf should not overflow! */
int len, ptr;
} state;
/* publish this function for use by low-level code, if required */
char *get_afmt_string(int afmt)
{
switch(afmt) {
case AFMT_MU_LAW:
return "mu-law";
break;
case AFMT_A_LAW:
return "A-law";
break;
case AFMT_U8:
return "unsigned 8 bit";
break;
case AFMT_S8:
return "signed 8 bit";
break;
case AFMT_S16_BE:
return "signed 16 bit BE";
break;
case AFMT_U16_BE:
return "unsigned 16 bit BE";
break;
case AFMT_S16_LE:
return "signed 16 bit LE";
break;
case AFMT_U16_LE:
return "unsigned 16 bit LE";
break;
case 0:
return "format not set" ;
break ;
default:
break ;
}
return "ERROR: Unsupported AFMT_XXXX code" ;
}
static int state_open(struct inode *inode, struct file *file)
{
char *buffer = state.buf;
int len = 0;
if (state.busy)
return -EBUSY;
if (!try_module_get(dmasound.mach.owner))
return -ENODEV;
state.ptr = 0;
state.busy = 1;
len += sprintf(buffer+len, "%sDMA sound driver rev %03d :\n",
dmasound.mach.name, (DMASOUND_CORE_REVISION<<4) +
((dmasound.mach.version>>8) & 0x0f));
len += sprintf(buffer+len,
"Core driver edition %02d.%02d : %s driver edition %02d.%02d\n",
DMASOUND_CORE_REVISION, DMASOUND_CORE_EDITION, dmasound.mach.name2,
(dmasound.mach.version >> 8), (dmasound.mach.version & 0xff)) ;
/* call the low-level module to fill in any stat info. that it has
if present. Maximum buffer usage is specified.
*/
if (dmasound.mach.state_info)
len += dmasound.mach.state_info(buffer+len,
(size_t) LOW_LEVEL_STAT_ALLOC) ;
/* make usage of the state buffer as deterministic as poss.
exceptional conditions could cause overrun - and this is flagged as
a kernel error.
*/
/* formats and settings */
len += sprintf(buffer+len,"\t\t === Formats & settings ===\n") ;
len += sprintf(buffer+len,"Parameter %20s%20s\n","soft","hard") ;
len += sprintf(buffer+len,"Format :%20s%20s\n",
get_afmt_string(dmasound.soft.format),
get_afmt_string(dmasound.hard.format));
len += sprintf(buffer+len,"Samp Rate:%14d s/sec%14d s/sec\n",
dmasound.soft.speed, dmasound.hard.speed);
len += sprintf(buffer+len,"Channels :%20s%20s\n",
dmasound.soft.stereo ? "stereo" : "mono",
dmasound.hard.stereo ? "stereo" : "mono" );
/* sound queue status */
len += sprintf(buffer+len,"\t\t === Sound Queue status ===\n");
len += sprintf(buffer+len,"Allocated:%8s%6s\n","Buffers","Size") ;
len += sprintf(buffer+len,"%9s:%8d%6d\n",
"write", write_sq.numBufs, write_sq.bufSize) ;
#ifdef HAS_RECORD
if (dmasound.mach.record)
len += sprintf(buffer+len,"%9s:%8d%6d\n",
"read", read_sq.numBufs, read_sq.bufSize) ;
#endif
len += sprintf(buffer+len,
"Current : MaxFrg FragSiz MaxAct Frnt Rear "
"Cnt RrSize A B S L xruns\n") ;
len += sprintf(buffer+len,"%9s:%7d%8d%7d%5d%5d%4d%7d%2d%2d%2d%2d%7d\n",
"write", write_sq.max_count, write_sq.block_size,
write_sq.max_active, write_sq.front, write_sq.rear,
write_sq.count, write_sq.rear_size, write_sq.active,
write_sq.busy, write_sq.syncing, write_sq.locked, write_sq.xruns) ;
#ifdef HAS_RECORD
if (dmasound.mach.record)
len += sprintf(buffer+len,"%9s:%7d%8d%7d%5d%5d%4d%7d%2d%2d%2d%2d%7d\n",
"read", read_sq.max_count, read_sq.block_size,
read_sq.max_active, read_sq.front, read_sq.rear,
read_sq.count, read_sq.rear_size, read_sq.active,
read_sq.busy, read_sq.syncing, read_sq.locked, read_sq.xruns) ;
#endif
#ifdef DEBUG_DMASOUND
printk("dmasound: stat buffer used %d bytes\n", len) ;
#endif
if (len >= STAT_BUFF_LEN)
printk(KERN_ERR "dmasound_core: stat buffer overflowed!\n");
state.len = len;
return 0;
}
static int state_release(struct inode *inode, struct file *file)
{
lock_kernel();
state.busy = 0;
module_put(dmasound.mach.owner);
unlock_kernel();
return 0;
}
static ssize_t state_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
int n = state.len - state.ptr;
if (n > count)
n = count;
if (n <= 0)
return 0;
if (copy_to_user(buf, &state.buf[state.ptr], n))
return -EFAULT;
state.ptr += n;
return n;
}
static struct file_operations state_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = state_read,
.open = state_open,
.release = state_release,
};
static int state_init(void)
{
#ifndef MODULE
int state_unit;
#endif
state_unit = register_sound_special(&state_fops, SND_DEV_STATUS);
if (state_unit < 0)
return state_unit ;
state.busy = 0;
return 0 ;
}
/*
* Config & Setup
*
* This function is called by _one_ chipset-specific driver
*/
int dmasound_init(void)
{
int res ;
#ifdef MODULE
if (irq_installed)
return -EBUSY;
#endif
/* Set up sound queue, /dev/audio and /dev/dsp. */
/* Set default settings. */
if ((res = sq_init()) < 0)
return res ;
/* Set up /dev/sndstat. */
if ((res = state_init()) < 0)
return res ;
/* Set up /dev/mixer. */
mixer_init();
if (!dmasound.mach.irqinit()) {
printk(KERN_ERR "DMA sound driver: Interrupt initialization failed\n");
return -ENODEV;
}
#ifdef MODULE
irq_installed = 1;
#endif
printk(KERN_INFO "%s DMA sound driver rev %03d installed\n",
dmasound.mach.name, (DMASOUND_CORE_REVISION<<4) +
((dmasound.mach.version>>8) & 0x0f));
printk(KERN_INFO
"Core driver edition %02d.%02d : %s driver edition %02d.%02d\n",
DMASOUND_CORE_REVISION, DMASOUND_CORE_EDITION, dmasound.mach.name2,
(dmasound.mach.version >> 8), (dmasound.mach.version & 0xff)) ;
printk(KERN_INFO "Write will use %4d fragments of %7d bytes as default\n",
numWriteBufs, writeBufSize) ;
#ifdef HAS_RECORD
if (dmasound.mach.record)
printk(KERN_INFO
"Read will use %4d fragments of %7d bytes as default\n",
numReadBufs, readBufSize) ;
#endif
return 0;
}
#ifdef MODULE
void dmasound_deinit(void)
{
if (irq_installed) {
sound_silence();
dmasound.mach.irqcleanup();
irq_installed = 0;
}
write_sq_release_buffers();
read_sq_release_buffers();
if (mixer_unit >= 0)
unregister_sound_mixer(mixer_unit);
if (state_unit >= 0)
unregister_sound_special(state_unit);
if (sq_unit >= 0)
unregister_sound_dsp(sq_unit);
}
#else /* !MODULE */
static int dmasound_setup(char *str)
{
int ints[6], size;
str = get_options(str, ARRAY_SIZE(ints), ints);
/* check the bootstrap parameter for "dmasound=" */
/* FIXME: other than in the most naive of cases there is no sense in these
* buffers being other than powers of two. This is not checked yet.
*/
switch (ints[0]) {
#ifdef HAS_RECORD
case 5:
if ((ints[5] < 0) || (ints[5] > MAX_CATCH_RADIUS))
printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
else
catchRadius = ints[5];
/* fall through */
case 4:
if (ints[4] < MIN_BUFFERS)
printk("dmasound_setup: invalid number of read buffers, using default = %d\n",
numReadBufs);
else
numReadBufs = ints[4];
/* fall through */
case 3:
if ((size = ints[3]) < 256) /* check for small buffer specs */
size <<= 10 ;
if (size < MIN_BUFSIZE || size > MAX_BUFSIZE)
printk("dmasound_setup: invalid read buffer size, using default = %d\n", readBufSize);
else
readBufSize = size;
/* fall through */
#else
case 3:
if ((ints[3] < 0) || (ints[3] > MAX_CATCH_RADIUS))
printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
else
catchRadius = ints[3];
/* fall through */
#endif
case 2:
if (ints[1] < MIN_BUFFERS)
printk("dmasound_setup: invalid number of buffers, using default = %d\n", numWriteBufs);
else
numWriteBufs = ints[1];
/* fall through */
case 1:
if ((size = ints[2]) < 256) /* check for small buffer specs */
size <<= 10 ;
if (size < MIN_BUFSIZE || size > MAX_BUFSIZE)
printk("dmasound_setup: invalid write buffer size, using default = %d\n", writeBufSize);
else
writeBufSize = size;
case 0:
break;
default:
printk("dmasound_setup: invalid number of arguments\n");
return 0;
}
return 1;
}
__setup("dmasound=", dmasound_setup);
#endif /* !MODULE */
/*
* Conversion tables
*/
#ifdef HAS_8BIT_TABLES
/* 8 bit mu-law */
char dmasound_ulaw2dma8[] = {
-126, -122, -118, -114, -110, -106, -102, -98,
-94, -90, -86, -82, -78, -74, -70, -66,
-63, -61, -59, -57, -55, -53, -51, -49,
-47, -45, -43, -41, -39, -37, -35, -33,
-31, -30, -29, -28, -27, -26, -25, -24,
-23, -22, -21, -20, -19, -18, -17, -16,
-16, -15, -15, -14, -14, -13, -13, -12,
-12, -11, -11, -10, -10, -9, -9, -8,
-8, -8, -7, -7, -7, -7, -6, -6,
-6, -6, -5, -5, -5, -5, -4, -4,
-4, -4, -4, -4, -3, -3, -3, -3,
-3, -3, -3, -3, -2, -2, -2, -2,
-2, -2, -2, -2, -2, -2, -2, -2,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, 0,
125, 121, 117, 113, 109, 105, 101, 97,
93, 89, 85, 81, 77, 73, 69, 65,
62, 60, 58, 56, 54, 52, 50, 48,
46, 44, 42, 40, 38, 36, 34, 32,
30, 29, 28, 27, 26, 25, 24, 23,
22, 21, 20, 19, 18, 17, 16, 15,
15, 14, 14, 13, 13, 12, 12, 11,
11, 10, 10, 9, 9, 8, 8, 7,
7, 7, 6, 6, 6, 6, 5, 5,
5, 5, 4, 4, 4, 4, 3, 3,
3, 3, 3, 3, 2, 2, 2, 2,
2, 2, 2, 2, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0
};
/* 8 bit A-law */
char dmasound_alaw2dma8[] = {
-22, -21, -24, -23, -18, -17, -20, -19,
-30, -29, -32, -31, -26, -25, -28, -27,
-11, -11, -12, -12, -9, -9, -10, -10,
-15, -15, -16, -16, -13, -13, -14, -14,
-86, -82, -94, -90, -70, -66, -78, -74,
-118, -114, -126, -122, -102, -98, -110, -106,
-43, -41, -47, -45, -35, -33, -39, -37,
-59, -57, -63, -61, -51, -49, -55, -53,
-2, -2, -2, -2, -2, -2, -2, -2,
-2, -2, -2, -2, -2, -2, -2, -2,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-6, -6, -6, -6, -5, -5, -5, -5,
-8, -8, -8, -8, -7, -7, -7, -7,
-3, -3, -3, -3, -3, -3, -3, -3,
-4, -4, -4, -4, -4, -4, -4, -4,
21, 20, 23, 22, 17, 16, 19, 18,
29, 28, 31, 30, 25, 24, 27, 26,
10, 10, 11, 11, 8, 8, 9, 9,
14, 14, 15, 15, 12, 12, 13, 13,
86, 82, 94, 90, 70, 66, 78, 74,
118, 114, 126, 122, 102, 98, 110, 106,
43, 41, 47, 45, 35, 33, 39, 37,
59, 57, 63, 61, 51, 49, 55, 53,
1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
5, 5, 5, 5, 4, 4, 4, 4,
7, 7, 7, 7, 6, 6, 6, 6,
2, 2, 2, 2, 2, 2, 2, 2,
3, 3, 3, 3, 3, 3, 3, 3
};
#endif /* HAS_8BIT_TABLES */
/*
* Visible symbols for modules
*/
EXPORT_SYMBOL(dmasound);
EXPORT_SYMBOL(dmasound_init);
#ifdef MODULE
EXPORT_SYMBOL(dmasound_deinit);
#endif
EXPORT_SYMBOL(dmasound_write_sq);
#ifdef HAS_RECORD
EXPORT_SYMBOL(dmasound_read_sq);
#endif
EXPORT_SYMBOL(dmasound_catchRadius);
#ifdef HAS_8BIT_TABLES
EXPORT_SYMBOL(dmasound_ulaw2dma8);
EXPORT_SYMBOL(dmasound_alaw2dma8);
#endif
EXPORT_SYMBOL(get_afmt_string) ;
View Git Blame Copy Permalink