2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 13:43:55 +08:00
linux-next/arch/mips/kernel/signal32.c
Eric W. Biederman cc731525f2 signal: Remove kernel interal si_code magic
struct siginfo is a union and the kernel since 2.4 has been hiding a union
tag in the high 16bits of si_code using the values:
__SI_KILL
__SI_TIMER
__SI_POLL
__SI_FAULT
__SI_CHLD
__SI_RT
__SI_MESGQ
__SI_SYS

While this looks plausible on the surface, in practice this situation has
not worked well.

- Injected positive signals are not copied to user space properly
  unless they have these magic high bits set.

- Injected positive signals are not reported properly by signalfd
  unless they have these magic high bits set.

- These kernel internal values leaked to userspace via ptrace_peek_siginfo

- It was possible to inject these kernel internal values and cause the
  the kernel to misbehave.

- Kernel developers got confused and expected these kernel internal values
  in userspace in kernel self tests.

- Kernel developers got confused and set si_code to __SI_FAULT which
  is SI_USER in userspace which causes userspace to think an ordinary user
  sent the signal and that it was not kernel generated.

- The values make it impossible to reorganize the code to transform
  siginfo_copy_to_user into a plain copy_to_user.  As si_code must
  be massaged before being passed to userspace.

So remove these kernel internal si codes and make the kernel code simpler
and more maintainable.

To replace these kernel internal magic si_codes introduce the helper
function siginfo_layout, that takes a signal number and an si_code and
computes which union member of siginfo is being used.  Have
siginfo_layout return an enumeration so that gcc will have enough
information to warn if a switch statement does not handle all of union
members.

A couple of architectures have a messed up ABI that defines signal
specific duplications of SI_USER which causes more special cases in
siginfo_layout than I would like.  The good news is only problem
architectures pay the cost.

Update all of the code that used the previous magic __SI_ values to
use the new SIL_ values and to call siginfo_layout to get those
values.  Escept where not all of the cases are handled remove the
defaults in the switch statements so that if a new case is missed in
the future the lack will show up at compile time.

Modify the code that copies siginfo si_code to userspace to just copy
the value and not cast si_code to a short first.  The high bits are no
longer used to hold a magic union member.

Fixup the siginfo header files to stop including the __SI_ values in
their constants and for the headers that were missing it to properly
update the number of si_codes for each signal type.

The fixes to copy_siginfo_from_user32 implementations has the
interesting property that several of them perviously should never have
worked as the __SI_ values they depended up where kernel internal.
With that dependency gone those implementations should work much
better.

The idea of not passing the __SI_ values out to userspace and then
not reinserting them has been tested with criu and criu worked without
changes.

Ref: 2.4.0-test1
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-24 14:30:28 -05:00

146 lines
4.2 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1994 - 2000, 2006 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2016, Imagination Technologies Ltd.
*/
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/syscalls.h>
#include <asm/compat.h>
#include <asm/compat-signal.h>
#include <linux/uaccess.h>
#include <asm/unistd.h>
#include "signal-common.h"
/* 32-bit compatibility types */
typedef unsigned int __sighandler32_t;
typedef void (*vfptr_t)(void);
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int sys32_sigsuspend(compat_sigset_t __user *uset)
{
return compat_sys_rt_sigsuspend(uset, sizeof(compat_sigset_t));
}
SYSCALL_DEFINE3(32_sigaction, long, sig, const struct compat_sigaction __user *, act,
struct compat_sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
int err = 0;
if (act) {
old_sigset_t mask;
s32 handler;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
err |= __get_user(handler, &act->sa_handler);
new_ka.sa.sa_handler = (void __user *)(s64)handler;
err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
err |= __get_user(mask, &act->sa_mask.sig[0]);
if (err)
return -EFAULT;
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
return -EFAULT;
err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
err |= __put_user((u32)(u64)old_ka.sa.sa_handler,
&oact->sa_handler);
err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig);
err |= __put_user(0, &oact->sa_mask.sig[1]);
err |= __put_user(0, &oact->sa_mask.sig[2]);
err |= __put_user(0, &oact->sa_mask.sig[3]);
if (err)
return -EFAULT;
}
return ret;
}
int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
{
int err;
if (!access_ok (VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
return -EFAULT;
/* If you change siginfo_t structure, please be sure
this code is fixed accordingly.
It should never copy any pad contained in the structure
to avoid security leaks, but must copy the generic
3 ints plus the relevant union member.
This routine must convert siginfo from 64bit to 32bit as well
at the same time. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
err |= __put_user(from->si_code, &to->si_code);
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
switch (siginfo_layout(from->si_signo, from->si_code)) {
case SIL_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
break;
case SIL_CHLD:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
case SIL_KILL:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
case SIL_FAULT:
err |= __put_user((unsigned long)from->si_addr, &to->si_addr);
break;
case SIL_POLL:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
case SIL_RT:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_int, &to->si_int);
break;
case SIL_SYS:
err |= __copy_to_user(&to->si_call_addr, &from->si_call_addr,
sizeof(compat_uptr_t));
err |= __put_user(from->si_syscall, &to->si_syscall);
err |= __put_user(from->si_arch, &to->si_arch);
break;
}
}
return err;
}
int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
{
if (copy_from_user(to, from, 3*sizeof(int)) ||
copy_from_user(to->_sifields._pad,
from->_sifields._pad, SI_PAD_SIZE32))
return -EFAULT;
return 0;
}