mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
b7ab524b93
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
836 lines
19 KiB
Plaintext
836 lines
19 KiB
Plaintext
/*
|
|
* Device Tree Source for AM33XX SoC
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/am33xx.h>
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "ti,am33xx";
|
|
interrupt-parent = <&intc>;
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
d_can0 = &dcan0;
|
|
d_can1 = &dcan1;
|
|
usb0 = &usb0;
|
|
usb1 = &usb1;
|
|
phy0 = &usb0_phy;
|
|
phy1 = &usb1_phy;
|
|
ethernet0 = &cpsw_emac0;
|
|
ethernet1 = &cpsw_emac1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a8";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
|
|
/*
|
|
* To consider voltage drop between PMIC and SoC,
|
|
* tolerance value is reduced to 2% from 4% and
|
|
* voltage value is increased as a precaution.
|
|
*/
|
|
operating-points = <
|
|
/* kHz uV */
|
|
720000 1285000
|
|
600000 1225000
|
|
500000 1125000
|
|
275000 1125000
|
|
>;
|
|
voltage-tolerance = <2>; /* 2 percentage */
|
|
|
|
clocks = <&dpll_mpu_ck>;
|
|
clock-names = "cpu";
|
|
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a8-pmu";
|
|
interrupts = <3>;
|
|
};
|
|
|
|
/*
|
|
* The soc node represents the soc top level view. It is used for IPs
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
|
*/
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap3-mpu";
|
|
ti,hwmods = "mpu";
|
|
};
|
|
};
|
|
|
|
am33xx_pinmux: pinmux@44e10800 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x44e10800 0x0238>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x7f>;
|
|
};
|
|
|
|
/*
|
|
* XXX: Use a flat representation of the AM33XX interconnect.
|
|
* The real AM33XX interconnect network is quite complex. Since
|
|
* it will not bring real advantage to represent that in DT
|
|
* for the moment, just use a fake OCP bus entry to represent
|
|
* the whole bus hierarchy.
|
|
*/
|
|
ocp {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
ti,hwmods = "l3_main";
|
|
|
|
prcm: prcm@44e00000 {
|
|
compatible = "ti,am3-prcm";
|
|
reg = <0x44e00000 0x4000>;
|
|
|
|
prcm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prcm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
scrm: scrm@44e10000 {
|
|
compatible = "ti,am3-scrm";
|
|
reg = <0x44e10000 0x2000>;
|
|
|
|
scrm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
scrm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@48200000 {
|
|
compatible = "ti,omap2-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
ti,intc-size = <128>;
|
|
reg = <0x48200000 0x1000>;
|
|
};
|
|
|
|
edma: edma@49000000 {
|
|
compatible = "ti,edma3";
|
|
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
|
|
reg = <0x49000000 0x10000>,
|
|
<0x44e10f90 0x10>;
|
|
interrupts = <12 13 14>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <64>;
|
|
ti,edma-regions = <4>;
|
|
ti,edma-slots = <256>;
|
|
};
|
|
|
|
gpio0: gpio@44e07000 {
|
|
compatible = "ti,omap4-gpio";
|
|
ti,hwmods = "gpio1";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x44e07000 0x1000>;
|
|
interrupts = <96>;
|
|
};
|
|
|
|
gpio1: gpio@4804c000 {
|
|
compatible = "ti,omap4-gpio";
|
|
ti,hwmods = "gpio2";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x4804c000 0x1000>;
|
|
interrupts = <98>;
|
|
};
|
|
|
|
gpio2: gpio@481ac000 {
|
|
compatible = "ti,omap4-gpio";
|
|
ti,hwmods = "gpio3";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x481ac000 0x1000>;
|
|
interrupts = <32>;
|
|
};
|
|
|
|
gpio3: gpio@481ae000 {
|
|
compatible = "ti,omap4-gpio";
|
|
ti,hwmods = "gpio4";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x481ae000 0x1000>;
|
|
interrupts = <62>;
|
|
};
|
|
|
|
uart0: serial@44e09000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart1";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x44e09000 0x2000>;
|
|
interrupts = <72>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@48022000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart2";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x48022000 0x2000>;
|
|
interrupts = <73>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@48024000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart3";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x48024000 0x2000>;
|
|
interrupts = <74>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@481a6000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart4";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x481a6000 0x2000>;
|
|
interrupts = <44>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@481a8000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart5";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x481a8000 0x2000>;
|
|
interrupts = <45>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@481aa000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart6";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x481aa000 0x2000>;
|
|
interrupts = <46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@44e0b000 {
|
|
compatible = "ti,omap4-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c1";
|
|
reg = <0x44e0b000 0x1000>;
|
|
interrupts = <70>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@4802a000 {
|
|
compatible = "ti,omap4-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c2";
|
|
reg = <0x4802a000 0x1000>;
|
|
interrupts = <71>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@4819c000 {
|
|
compatible = "ti,omap4-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c3";
|
|
reg = <0x4819c000 0x1000>;
|
|
interrupts = <30>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: mmc@48060000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
ti,hwmods = "mmc1";
|
|
ti,dual-volt;
|
|
ti,needs-special-reset;
|
|
ti,needs-special-hs-handling;
|
|
dmas = <&edma 24
|
|
&edma 25>;
|
|
dma-names = "tx", "rx";
|
|
interrupts = <64>;
|
|
interrupt-parent = <&intc>;
|
|
reg = <0x48060000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc2: mmc@481d8000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
ti,hwmods = "mmc2";
|
|
ti,needs-special-reset;
|
|
dmas = <&edma 2
|
|
&edma 3>;
|
|
dma-names = "tx", "rx";
|
|
interrupts = <28>;
|
|
interrupt-parent = <&intc>;
|
|
reg = <0x481d8000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc3: mmc@47810000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
ti,hwmods = "mmc3";
|
|
ti,needs-special-reset;
|
|
interrupts = <29>;
|
|
interrupt-parent = <&intc>;
|
|
reg = <0x47810000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hwspinlock: spinlock@480ca000 {
|
|
compatible = "ti,omap4-hwspinlock";
|
|
reg = <0x480ca000 0x1000>;
|
|
ti,hwmods = "spinlock";
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
wdt2: wdt@44e35000 {
|
|
compatible = "ti,omap3-wdt";
|
|
ti,hwmods = "wd_timer2";
|
|
reg = <0x44e35000 0x1000>;
|
|
interrupts = <91>;
|
|
};
|
|
|
|
dcan0: d_can@481cc000 {
|
|
compatible = "bosch,d_can";
|
|
ti,hwmods = "d_can0";
|
|
reg = <0x481cc000 0x2000
|
|
0x44e10644 0x4>;
|
|
interrupts = <52>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dcan1: d_can@481d0000 {
|
|
compatible = "bosch,d_can";
|
|
ti,hwmods = "d_can1";
|
|
reg = <0x481d0000 0x2000
|
|
0x44e10644 0x4>;
|
|
interrupts = <55>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer1: timer@44e31000 {
|
|
compatible = "ti,am335x-timer-1ms";
|
|
reg = <0x44e31000 0x400>;
|
|
interrupts = <67>;
|
|
ti,hwmods = "timer1";
|
|
ti,timer-alwon;
|
|
};
|
|
|
|
timer2: timer@48040000 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x48040000 0x400>;
|
|
interrupts = <68>;
|
|
ti,hwmods = "timer2";
|
|
};
|
|
|
|
timer3: timer@48042000 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x48042000 0x400>;
|
|
interrupts = <69>;
|
|
ti,hwmods = "timer3";
|
|
};
|
|
|
|
timer4: timer@48044000 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x48044000 0x400>;
|
|
interrupts = <92>;
|
|
ti,hwmods = "timer4";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer5: timer@48046000 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x48046000 0x400>;
|
|
interrupts = <93>;
|
|
ti,hwmods = "timer5";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer6: timer@48048000 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x48048000 0x400>;
|
|
interrupts = <94>;
|
|
ti,hwmods = "timer6";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer7: timer@4804a000 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x4804a000 0x400>;
|
|
interrupts = <95>;
|
|
ti,hwmods = "timer7";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
rtc: rtc@44e3e000 {
|
|
compatible = "ti,da830-rtc";
|
|
reg = <0x44e3e000 0x1000>;
|
|
interrupts = <75
|
|
76>;
|
|
ti,hwmods = "rtc";
|
|
};
|
|
|
|
spi0: spi@48030000 {
|
|
compatible = "ti,omap4-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x48030000 0x400>;
|
|
interrupts = <65>;
|
|
ti,spi-num-cs = <2>;
|
|
ti,hwmods = "spi0";
|
|
dmas = <&edma 16
|
|
&edma 17
|
|
&edma 18
|
|
&edma 19>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@481a0000 {
|
|
compatible = "ti,omap4-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x481a0000 0x400>;
|
|
interrupts = <125>;
|
|
ti,spi-num-cs = <2>;
|
|
ti,hwmods = "spi1";
|
|
dmas = <&edma 42
|
|
&edma 43
|
|
&edma 44
|
|
&edma 45>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb: usb@47400000 {
|
|
compatible = "ti,am33xx-usb";
|
|
reg = <0x47400000 0x1000>;
|
|
ranges;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ti,hwmods = "usb_otg_hs";
|
|
status = "disabled";
|
|
|
|
usb_ctrl_mod: control@44e10620 {
|
|
compatible = "ti,am335x-usb-ctrl-module";
|
|
reg = <0x44e10620 0x10
|
|
0x44e10648 0x4>;
|
|
reg-names = "phy_ctrl", "wakeup";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb0_phy: usb-phy@47401300 {
|
|
compatible = "ti,am335x-usb-phy";
|
|
reg = <0x47401300 0x100>;
|
|
reg-names = "phy";
|
|
status = "disabled";
|
|
ti,ctrl_mod = <&usb_ctrl_mod>;
|
|
};
|
|
|
|
usb0: usb@47401000 {
|
|
compatible = "ti,musb-am33xx";
|
|
status = "disabled";
|
|
reg = <0x47401400 0x400
|
|
0x47401000 0x200>;
|
|
reg-names = "mc", "control";
|
|
|
|
interrupts = <18>;
|
|
interrupt-names = "mc";
|
|
dr_mode = "otg";
|
|
mentor,multipoint = <1>;
|
|
mentor,num-eps = <16>;
|
|
mentor,ram-bits = <12>;
|
|
mentor,power = <500>;
|
|
phys = <&usb0_phy>;
|
|
|
|
dmas = <&cppi41dma 0 0 &cppi41dma 1 0
|
|
&cppi41dma 2 0 &cppi41dma 3 0
|
|
&cppi41dma 4 0 &cppi41dma 5 0
|
|
&cppi41dma 6 0 &cppi41dma 7 0
|
|
&cppi41dma 8 0 &cppi41dma 9 0
|
|
&cppi41dma 10 0 &cppi41dma 11 0
|
|
&cppi41dma 12 0 &cppi41dma 13 0
|
|
&cppi41dma 14 0 &cppi41dma 0 1
|
|
&cppi41dma 1 1 &cppi41dma 2 1
|
|
&cppi41dma 3 1 &cppi41dma 4 1
|
|
&cppi41dma 5 1 &cppi41dma 6 1
|
|
&cppi41dma 7 1 &cppi41dma 8 1
|
|
&cppi41dma 9 1 &cppi41dma 10 1
|
|
&cppi41dma 11 1 &cppi41dma 12 1
|
|
&cppi41dma 13 1 &cppi41dma 14 1>;
|
|
dma-names =
|
|
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
|
|
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
|
|
"rx14", "rx15",
|
|
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
|
|
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
|
|
"tx14", "tx15";
|
|
};
|
|
|
|
usb1_phy: usb-phy@47401b00 {
|
|
compatible = "ti,am335x-usb-phy";
|
|
reg = <0x47401b00 0x100>;
|
|
reg-names = "phy";
|
|
status = "disabled";
|
|
ti,ctrl_mod = <&usb_ctrl_mod>;
|
|
};
|
|
|
|
usb1: usb@47401800 {
|
|
compatible = "ti,musb-am33xx";
|
|
status = "disabled";
|
|
reg = <0x47401c00 0x400
|
|
0x47401800 0x200>;
|
|
reg-names = "mc", "control";
|
|
interrupts = <19>;
|
|
interrupt-names = "mc";
|
|
dr_mode = "otg";
|
|
mentor,multipoint = <1>;
|
|
mentor,num-eps = <16>;
|
|
mentor,ram-bits = <12>;
|
|
mentor,power = <500>;
|
|
phys = <&usb1_phy>;
|
|
|
|
dmas = <&cppi41dma 15 0 &cppi41dma 16 0
|
|
&cppi41dma 17 0 &cppi41dma 18 0
|
|
&cppi41dma 19 0 &cppi41dma 20 0
|
|
&cppi41dma 21 0 &cppi41dma 22 0
|
|
&cppi41dma 23 0 &cppi41dma 24 0
|
|
&cppi41dma 25 0 &cppi41dma 26 0
|
|
&cppi41dma 27 0 &cppi41dma 28 0
|
|
&cppi41dma 29 0 &cppi41dma 15 1
|
|
&cppi41dma 16 1 &cppi41dma 17 1
|
|
&cppi41dma 18 1 &cppi41dma 19 1
|
|
&cppi41dma 20 1 &cppi41dma 21 1
|
|
&cppi41dma 22 1 &cppi41dma 23 1
|
|
&cppi41dma 24 1 &cppi41dma 25 1
|
|
&cppi41dma 26 1 &cppi41dma 27 1
|
|
&cppi41dma 28 1 &cppi41dma 29 1>;
|
|
dma-names =
|
|
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
|
|
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
|
|
"rx14", "rx15",
|
|
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
|
|
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
|
|
"tx14", "tx15";
|
|
};
|
|
|
|
cppi41dma: dma-controller@47402000 {
|
|
compatible = "ti,am3359-cppi41";
|
|
reg = <0x47400000 0x1000
|
|
0x47402000 0x1000
|
|
0x47403000 0x1000
|
|
0x47404000 0x4000>;
|
|
reg-names = "glue", "controller", "scheduler", "queuemgr";
|
|
interrupts = <17>;
|
|
interrupt-names = "glue";
|
|
#dma-cells = <2>;
|
|
#dma-channels = <30>;
|
|
#dma-requests = <256>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
epwmss0: epwmss@48300000 {
|
|
compatible = "ti,am33xx-pwmss";
|
|
reg = <0x48300000 0x10>;
|
|
ti,hwmods = "epwmss0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
ranges = <0x48300100 0x48300100 0x80 /* ECAP */
|
|
0x48300180 0x48300180 0x80 /* EQEP */
|
|
0x48300200 0x48300200 0x80>; /* EHRPWM */
|
|
|
|
ecap0: ecap@48300100 {
|
|
compatible = "ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x48300100 0x80>;
|
|
interrupts = <31>;
|
|
interrupt-names = "ecap0";
|
|
ti,hwmods = "ecap0";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehrpwm0: ehrpwm@48300200 {
|
|
compatible = "ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x48300200 0x80>;
|
|
ti,hwmods = "ehrpwm0";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
epwmss1: epwmss@48302000 {
|
|
compatible = "ti,am33xx-pwmss";
|
|
reg = <0x48302000 0x10>;
|
|
ti,hwmods = "epwmss1";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
ranges = <0x48302100 0x48302100 0x80 /* ECAP */
|
|
0x48302180 0x48302180 0x80 /* EQEP */
|
|
0x48302200 0x48302200 0x80>; /* EHRPWM */
|
|
|
|
ecap1: ecap@48302100 {
|
|
compatible = "ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x48302100 0x80>;
|
|
interrupts = <47>;
|
|
interrupt-names = "ecap1";
|
|
ti,hwmods = "ecap1";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehrpwm1: ehrpwm@48302200 {
|
|
compatible = "ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x48302200 0x80>;
|
|
ti,hwmods = "ehrpwm1";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
epwmss2: epwmss@48304000 {
|
|
compatible = "ti,am33xx-pwmss";
|
|
reg = <0x48304000 0x10>;
|
|
ti,hwmods = "epwmss2";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
ranges = <0x48304100 0x48304100 0x80 /* ECAP */
|
|
0x48304180 0x48304180 0x80 /* EQEP */
|
|
0x48304200 0x48304200 0x80>; /* EHRPWM */
|
|
|
|
ecap2: ecap@48304100 {
|
|
compatible = "ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x48304100 0x80>;
|
|
interrupts = <61>;
|
|
interrupt-names = "ecap2";
|
|
ti,hwmods = "ecap2";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehrpwm2: ehrpwm@48304200 {
|
|
compatible = "ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x48304200 0x80>;
|
|
ti,hwmods = "ehrpwm2";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
mac: ethernet@4a100000 {
|
|
compatible = "ti,cpsw";
|
|
ti,hwmods = "cpgmac0";
|
|
cpdma_channels = <8>;
|
|
ale_entries = <1024>;
|
|
bd_ram_size = <0x2000>;
|
|
no_bd_ram = <0>;
|
|
rx_descs = <64>;
|
|
mac_control = <0x20>;
|
|
slaves = <2>;
|
|
active_slave = <0>;
|
|
cpts_clock_mult = <0x80000000>;
|
|
cpts_clock_shift = <29>;
|
|
reg = <0x4a100000 0x800
|
|
0x4a101200 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
/*
|
|
* c0_rx_thresh_pend
|
|
* c0_rx_pend
|
|
* c0_tx_pend
|
|
* c0_misc_pend
|
|
*/
|
|
interrupts = <40 41 42 43>;
|
|
ranges;
|
|
|
|
davinci_mdio: mdio@4a101000 {
|
|
compatible = "ti,davinci_mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "davinci_mdio";
|
|
bus_freq = <1000000>;
|
|
reg = <0x4a101000 0x100>;
|
|
};
|
|
|
|
cpsw_emac0: slave@4a100200 {
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
|
|
cpsw_emac1: slave@4a100300 {
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
|
|
phy_sel: cpsw-phy-sel@44e10650 {
|
|
compatible = "ti,am3352-cpsw-phy-sel";
|
|
reg= <0x44e10650 0x4>;
|
|
reg-names = "gmii-sel";
|
|
};
|
|
};
|
|
|
|
ocmcram: ocmcram@40300000 {
|
|
compatible = "ti,am3352-ocmcram";
|
|
reg = <0x40300000 0x10000>;
|
|
ti,hwmods = "ocmcram";
|
|
};
|
|
|
|
wkup_m3: wkup_m3@44d00000 {
|
|
compatible = "ti,am3353-wkup-m3";
|
|
reg = <0x44d00000 0x4000 /* M3 UMEM */
|
|
0x44d80000 0x2000>; /* M3 DMEM */
|
|
ti,hwmods = "wkup_m3";
|
|
ti,no-reset-on-init;
|
|
};
|
|
|
|
elm: elm@48080000 {
|
|
compatible = "ti,am3352-elm";
|
|
reg = <0x48080000 0x2000>;
|
|
interrupts = <4>;
|
|
ti,hwmods = "elm";
|
|
status = "disabled";
|
|
};
|
|
|
|
lcdc: lcdc@4830e000 {
|
|
compatible = "ti,am33xx-tilcdc";
|
|
reg = <0x4830e000 0x1000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <36>;
|
|
ti,hwmods = "lcdc";
|
|
status = "disabled";
|
|
};
|
|
|
|
tscadc: tscadc@44e0d000 {
|
|
compatible = "ti,am3359-tscadc";
|
|
reg = <0x44e0d000 0x1000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <16>;
|
|
ti,hwmods = "adc_tsc";
|
|
status = "disabled";
|
|
|
|
tsc {
|
|
compatible = "ti,am3359-tsc";
|
|
};
|
|
am335x_adc: adc {
|
|
#io-channel-cells = <1>;
|
|
compatible = "ti,am3359-adc";
|
|
};
|
|
};
|
|
|
|
gpmc: gpmc@50000000 {
|
|
compatible = "ti,am3352-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
ti,no-idle-on-init;
|
|
reg = <0x50000000 0x2000>;
|
|
interrupts = <100>;
|
|
gpmc,num-cs = <7>;
|
|
gpmc,num-waitpins = <2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sham: sham@53100000 {
|
|
compatible = "ti,omap4-sham";
|
|
ti,hwmods = "sham";
|
|
reg = <0x53100000 0x200>;
|
|
interrupts = <109>;
|
|
dmas = <&edma 36>;
|
|
dma-names = "rx";
|
|
};
|
|
|
|
aes: aes@53500000 {
|
|
compatible = "ti,omap4-aes";
|
|
ti,hwmods = "aes";
|
|
reg = <0x53500000 0xa0>;
|
|
interrupts = <103>;
|
|
dmas = <&edma 6>,
|
|
<&edma 5>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mcasp0: mcasp@48038000 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
ti,hwmods = "mcasp0";
|
|
reg = <0x48038000 0x2000>,
|
|
<0x46000000 0x400000>;
|
|
reg-names = "mpu", "dat";
|
|
interrupts = <80>, <81>;
|
|
interrupts-names = "tx", "rx";
|
|
status = "disabled";
|
|
dmas = <&edma 8>,
|
|
<&edma 9>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mcasp1: mcasp@4803C000 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
ti,hwmods = "mcasp1";
|
|
reg = <0x4803C000 0x2000>,
|
|
<0x46400000 0x400000>;
|
|
reg-names = "mpu", "dat";
|
|
interrupts = <82>, <83>;
|
|
interrupts-names = "tx", "rx";
|
|
status = "disabled";
|
|
dmas = <&edma 10>,
|
|
<&edma 11>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
rng: rng@48310000 {
|
|
compatible = "ti,omap4-rng";
|
|
ti,hwmods = "rng";
|
|
reg = <0x48310000 0x2000>;
|
|
interrupts = <111>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "am33xx-clocks.dtsi"
|