mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
ed89a7551c
We used these, in a first version of leds-pcap driver, in order to encode gpio enabling and gpio inversion for a led inside the variable used for the gpio number. In the new leds-pcap driver we rely on gpio_is_valid() to derive if a led is gpio enabled and we have a dedicated flag to tell if the gpio value has to be inverted. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
253 lines
7.7 KiB
C
253 lines
7.7 KiB
C
/*
|
|
* Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com>
|
|
*
|
|
* For further information, please see http://wiki.openezx.org/PCAP2
|
|
*/
|
|
|
|
#ifndef EZX_PCAP_H
|
|
#define EZX_PCAP_H
|
|
|
|
struct pcap_subdev {
|
|
int id;
|
|
const char *name;
|
|
void *platform_data;
|
|
};
|
|
|
|
struct pcap_platform_data {
|
|
unsigned int irq_base;
|
|
unsigned int config;
|
|
void (*init) (void *); /* board specific init */
|
|
int num_subdevs;
|
|
struct pcap_subdev *subdevs;
|
|
};
|
|
|
|
struct pcap_chip;
|
|
|
|
int ezx_pcap_write(struct pcap_chip *, u8, u32);
|
|
int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
|
|
int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32);
|
|
int pcap_to_irq(struct pcap_chip *, int);
|
|
int irq_to_pcap(struct pcap_chip *, int);
|
|
int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
|
|
int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
|
|
void pcap_set_ts_bits(struct pcap_chip *, u32);
|
|
|
|
#define PCAP_SECOND_PORT 1
|
|
#define PCAP_CS_AH 2
|
|
|
|
#define PCAP_REGISTER_WRITE_OP_BIT 0x80000000
|
|
#define PCAP_REGISTER_READ_OP_BIT 0x00000000
|
|
|
|
#define PCAP_REGISTER_VALUE_MASK 0x01ffffff
|
|
#define PCAP_REGISTER_ADDRESS_MASK 0x7c000000
|
|
#define PCAP_REGISTER_ADDRESS_SHIFT 26
|
|
#define PCAP_REGISTER_NUMBER 32
|
|
#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff
|
|
#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff
|
|
|
|
/* registers accessible by both pcap ports */
|
|
#define PCAP_REG_ISR 0x0 /* Interrupt Status */
|
|
#define PCAP_REG_MSR 0x1 /* Interrupt Mask */
|
|
#define PCAP_REG_PSTAT 0x2 /* Processor Status */
|
|
#define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */
|
|
#define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */
|
|
#define PCAP_REG_BATT 0x8 /* Battery Control */
|
|
#define PCAP_REG_ADC 0x9 /* AD Control */
|
|
#define PCAP_REG_ADR 0xa /* AD Result */
|
|
#define PCAP_REG_CODEC 0xb /* Audio Codec Control */
|
|
#define PCAP_REG_RX_AMPS 0xc /* RX Audio Amplifiers Control */
|
|
#define PCAP_REG_ST_DAC 0xd /* Stereo DAC Control */
|
|
#define PCAP_REG_BUSCTRL 0x14 /* Connectivity Control */
|
|
#define PCAP_REG_PERIPH 0x15 /* Peripheral Control */
|
|
#define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */
|
|
#define PCAP_REG_TX_AMPS 0x1a /* TX Audio Amplifiers Control */
|
|
#define PCAP_REG_GP 0x1b /* General Purpose */
|
|
#define PCAP_REG_TEST1 0x1c
|
|
#define PCAP_REG_TEST2 0x1d
|
|
#define PCAP_REG_VENDOR_TEST1 0x1e
|
|
#define PCAP_REG_VENDOR_TEST2 0x1f
|
|
|
|
/* registers accessible by pcap port 1 only (a1200, e2 & e6) */
|
|
#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */
|
|
#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */
|
|
#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */
|
|
#define PCAP_REG_RTC_TOD 0xe /* RTC Time of Day */
|
|
#define PCAP_REG_RTC_TODA 0xf /* RTC Time of Day Alarm */
|
|
#define PCAP_REG_RTC_DAY 0x10 /* RTC Day */
|
|
#define PCAP_REG_RTC_DAYA 0x11 /* RTC Day Alarm */
|
|
#define PCAP_REG_MTRTMR 0x12 /* AD Monitor Timer */
|
|
#define PCAP_REG_PWR 0x13 /* Power Control */
|
|
#define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */
|
|
#define PCAP_REG_VENDOR_REV 0x17
|
|
#define PCAP_REG_PERIPH_MASK 0x19 /* Peripheral Mask */
|
|
|
|
/* PCAP2 Interrupts */
|
|
#define PCAP_NIRQS 23
|
|
#define PCAP_IRQ_ADCDONE 0 /* ADC done port 1 */
|
|
#define PCAP_IRQ_TS 1 /* Touch Screen */
|
|
#define PCAP_IRQ_1HZ 2 /* 1HZ timer */
|
|
#define PCAP_IRQ_WH 3 /* ADC above high limit */
|
|
#define PCAP_IRQ_WL 4 /* ADC below low limit */
|
|
#define PCAP_IRQ_TODA 5 /* Time of day alarm */
|
|
#define PCAP_IRQ_USB4V 6 /* USB above 4V */
|
|
#define PCAP_IRQ_ONOFF 7 /* On/Off button */
|
|
#define PCAP_IRQ_ONOFF2 8 /* On/Off button 2 */
|
|
#define PCAP_IRQ_USB1V 9 /* USB above 1V */
|
|
#define PCAP_IRQ_MOBPORT 10
|
|
#define PCAP_IRQ_MIC 11 /* Mic attach/HS button */
|
|
#define PCAP_IRQ_HS 12 /* Headset attach */
|
|
#define PCAP_IRQ_ST 13
|
|
#define PCAP_IRQ_PC 14 /* Power Cut */
|
|
#define PCAP_IRQ_WARM 15
|
|
#define PCAP_IRQ_EOL 16 /* Battery End Of Life */
|
|
#define PCAP_IRQ_CLK 17
|
|
#define PCAP_IRQ_SYSRST 18 /* System Reset */
|
|
#define PCAP_IRQ_DUMMY 19
|
|
#define PCAP_IRQ_ADCDONE2 20 /* ADC done port 2 */
|
|
#define PCAP_IRQ_SOFTRESET 21
|
|
#define PCAP_IRQ_MNEXB 22
|
|
|
|
/* voltage regulators */
|
|
#define V1 0
|
|
#define V2 1
|
|
#define V3 2
|
|
#define V4 3
|
|
#define V5 4
|
|
#define V6 5
|
|
#define V7 6
|
|
#define V8 7
|
|
#define V9 8
|
|
#define V10 9
|
|
#define VAUX1 10
|
|
#define VAUX2 11
|
|
#define VAUX3 12
|
|
#define VAUX4 13
|
|
#define VSIM 14
|
|
#define VSIM2 15
|
|
#define VVIB 16
|
|
#define SW1 17
|
|
#define SW2 18
|
|
#define SW3 19
|
|
#define SW1S 20
|
|
#define SW2S 21
|
|
|
|
#define PCAP_BATT_DAC_MASK 0x000000ff
|
|
#define PCAP_BATT_DAC_SHIFT 0
|
|
#define PCAP_BATT_B_FDBK (1 << 8)
|
|
#define PCAP_BATT_EXT_ISENSE (1 << 9)
|
|
#define PCAP_BATT_V_COIN_MASK 0x00003c00
|
|
#define PCAP_BATT_V_COIN_SHIFT 10
|
|
#define PCAP_BATT_I_COIN (1 << 14)
|
|
#define PCAP_BATT_COIN_CH_EN (1 << 15)
|
|
#define PCAP_BATT_EOL_SEL_MASK 0x000e0000
|
|
#define PCAP_BATT_EOL_SEL_SHIFT 17
|
|
#define PCAP_BATT_EOL_CMP_EN (1 << 20)
|
|
#define PCAP_BATT_BATT_DET_EN (1 << 21)
|
|
#define PCAP_BATT_THERMBIAS_CTRL (1 << 22)
|
|
|
|
#define PCAP_ADC_ADEN (1 << 0)
|
|
#define PCAP_ADC_RAND (1 << 1)
|
|
#define PCAP_ADC_AD_SEL1 (1 << 2)
|
|
#define PCAP_ADC_AD_SEL2 (1 << 3)
|
|
#define PCAP_ADC_ADA1_MASK 0x00000070
|
|
#define PCAP_ADC_ADA1_SHIFT 4
|
|
#define PCAP_ADC_ADA2_MASK 0x00000380
|
|
#define PCAP_ADC_ADA2_SHIFT 7
|
|
#define PCAP_ADC_ATO_MASK 0x00003c00
|
|
#define PCAP_ADC_ATO_SHIFT 10
|
|
#define PCAP_ADC_ATOX (1 << 14)
|
|
#define PCAP_ADC_MTR1 (1 << 15)
|
|
#define PCAP_ADC_MTR2 (1 << 16)
|
|
#define PCAP_ADC_TS_M_MASK 0x000e0000
|
|
#define PCAP_ADC_TS_M_SHIFT 17
|
|
#define PCAP_ADC_TS_REF_LOWPWR (1 << 20)
|
|
#define PCAP_ADC_TS_REFENB (1 << 21)
|
|
#define PCAP_ADC_BATT_I_POLARITY (1 << 22)
|
|
#define PCAP_ADC_BATT_I_ADC (1 << 23)
|
|
|
|
#define PCAP_ADC_BANK_0 0
|
|
#define PCAP_ADC_BANK_1 1
|
|
/* ADC bank 0 */
|
|
#define PCAP_ADC_CH_COIN 0
|
|
#define PCAP_ADC_CH_BATT 1
|
|
#define PCAP_ADC_CH_BPLUS 2
|
|
#define PCAP_ADC_CH_MOBPORTB 3
|
|
#define PCAP_ADC_CH_TEMPERATURE 4
|
|
#define PCAP_ADC_CH_CHARGER_ID 5
|
|
#define PCAP_ADC_CH_AD6 6
|
|
/* ADC bank 1 */
|
|
#define PCAP_ADC_CH_AD7 0
|
|
#define PCAP_ADC_CH_AD8 1
|
|
#define PCAP_ADC_CH_AD9 2
|
|
#define PCAP_ADC_CH_TS_X1 3
|
|
#define PCAP_ADC_CH_TS_X2 4
|
|
#define PCAP_ADC_CH_TS_Y1 5
|
|
#define PCAP_ADC_CH_TS_Y2 6
|
|
|
|
#define PCAP_ADC_T_NOW 0
|
|
#define PCAP_ADC_T_IN_BURST 1
|
|
#define PCAP_ADC_T_OUT_BURST 2
|
|
|
|
#define PCAP_ADC_ATO_IN_BURST 6
|
|
#define PCAP_ADC_ATO_OUT_BURST 0
|
|
|
|
#define PCAP_ADC_TS_M_XY 1
|
|
#define PCAP_ADC_TS_M_PRESSURE 2
|
|
#define PCAP_ADC_TS_M_PLATE_X 3
|
|
#define PCAP_ADC_TS_M_PLATE_Y 4
|
|
#define PCAP_ADC_TS_M_STANDBY 5
|
|
#define PCAP_ADC_TS_M_NONTS 6
|
|
|
|
#define PCAP_ADR_ADD1_MASK 0x000003ff
|
|
#define PCAP_ADR_ADD1_SHIFT 0
|
|
#define PCAP_ADR_ADD2_MASK 0x000ffc00
|
|
#define PCAP_ADR_ADD2_SHIFT 10
|
|
#define PCAP_ADR_ADINC1 (1 << 20)
|
|
#define PCAP_ADR_ADINC2 (1 << 21)
|
|
#define PCAP_ADR_ASC (1 << 22)
|
|
#define PCAP_ADR_ONESHOT (1 << 23)
|
|
|
|
#define PCAP_BUSCTRL_FSENB (1 << 0)
|
|
#define PCAP_BUSCTRL_USB_SUSPEND (1 << 1)
|
|
#define PCAP_BUSCTRL_USB_PU (1 << 2)
|
|
#define PCAP_BUSCTRL_USB_PD (1 << 3)
|
|
#define PCAP_BUSCTRL_VUSB_EN (1 << 4)
|
|
#define PCAP_BUSCTRL_USB_PS (1 << 5)
|
|
#define PCAP_BUSCTRL_VUSB_MSTR_EN (1 << 6)
|
|
#define PCAP_BUSCTRL_VBUS_PD_ENB (1 << 7)
|
|
#define PCAP_BUSCTRL_CURRLIM (1 << 8)
|
|
#define PCAP_BUSCTRL_RS232ENB (1 << 9)
|
|
#define PCAP_BUSCTRL_RS232_DIR (1 << 10)
|
|
#define PCAP_BUSCTRL_SE0_CONN (1 << 11)
|
|
#define PCAP_BUSCTRL_USB_PDM (1 << 12)
|
|
#define PCAP_BUSCTRL_BUS_PRI_ADJ (1 << 24)
|
|
|
|
/* leds */
|
|
#define PCAP_LED0 0
|
|
#define PCAP_LED1 1
|
|
#define PCAP_BL0 2
|
|
#define PCAP_BL1 3
|
|
#define PCAP_LED_3MA 0
|
|
#define PCAP_LED_4MA 1
|
|
#define PCAP_LED_5MA 2
|
|
#define PCAP_LED_9MA 3
|
|
#define PCAP_LED_T_MASK 0xf
|
|
#define PCAP_LED_C_MASK 0x3
|
|
#define PCAP_BL_MASK 0x1f
|
|
#define PCAP_BL0_SHIFT 0
|
|
#define PCAP_LED0_EN (1 << 5)
|
|
#define PCAP_LED1_EN (1 << 6)
|
|
#define PCAP_LED0_T_SHIFT 7
|
|
#define PCAP_LED1_T_SHIFT 11
|
|
#define PCAP_LED0_C_SHIFT 15
|
|
#define PCAP_LED1_C_SHIFT 17
|
|
#define PCAP_BL1_SHIFT 20
|
|
|
|
/* RTC */
|
|
#define PCAP_RTC_DAY_MASK 0x3fff
|
|
#define PCAP_RTC_TOD_MASK 0xffff
|
|
#define PCAP_RTC_PC_MASK 0x7
|
|
#define SEC_PER_DAY 86400
|
|
|
|
#endif
|