2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/net/atm/br2684.c
Krzysztof Mazur 9eba25268e br2684: allow assign only on a connected socket
The br2684 does not check if used vcc is in connected state,
causing potential Oops in pppoatm_send() when vcc->send() is called
on not fully connected socket.

Now br2684 can be assigned only on connected sockets; otherwise
-EINVAL error is returned.

Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-12-02 00:05:19 +00:00

887 lines
23 KiB
C

/*
* Ethernet netdevice using ATM AAL5 as underlying carrier
* (RFC1483 obsoleted by RFC2684) for Linux
*
* Authors: Marcell GAL, 2000, XDSL Ltd, Hungary
* Eric Kinzie, 2006-2007, US Naval Research Laboratory
*/
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/ip.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
#include <net/arp.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/capability.h>
#include <linux/seq_file.h>
#include <linux/atmbr2684.h>
#include "common.h"
static void skb_debug(const struct sk_buff *skb)
{
#ifdef SKB_DEBUG
#define NUM2PRINT 50
print_hex_dump(KERN_DEBUG, "br2684: skb: ", DUMP_OFFSET,
16, 1, skb->data, min(NUM2PRINT, skb->len), true);
#endif
}
#define BR2684_ETHERTYPE_LEN 2
#define BR2684_PAD_LEN 2
#define LLC 0xaa, 0xaa, 0x03
#define SNAP_BRIDGED 0x00, 0x80, 0xc2
#define SNAP_ROUTED 0x00, 0x00, 0x00
#define PID_ETHERNET 0x00, 0x07
#define ETHERTYPE_IPV4 0x08, 0x00
#define ETHERTYPE_IPV6 0x86, 0xdd
#define PAD_BRIDGED 0x00, 0x00
static const unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
static const unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
static const unsigned char llc_oui_pid_pad[] =
{ LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
static const unsigned char pad[] = { PAD_BRIDGED };
static const unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
static const unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
enum br2684_encaps {
e_vc = BR2684_ENCAPS_VC,
e_llc = BR2684_ENCAPS_LLC,
};
struct br2684_vcc {
struct atm_vcc *atmvcc;
struct net_device *device;
/* keep old push, pop functions for chaining */
void (*old_push)(struct atm_vcc *vcc, struct sk_buff *skb);
void (*old_pop)(struct atm_vcc *vcc, struct sk_buff *skb);
void (*old_release_cb)(struct atm_vcc *vcc);
struct module *old_owner;
enum br2684_encaps encaps;
struct list_head brvccs;
#ifdef CONFIG_ATM_BR2684_IPFILTER
struct br2684_filter filter;
#endif /* CONFIG_ATM_BR2684_IPFILTER */
unsigned int copies_needed, copies_failed;
atomic_t qspace;
};
struct br2684_dev {
struct net_device *net_dev;
struct list_head br2684_devs;
int number;
struct list_head brvccs; /* one device <=> one vcc (before xmas) */
int mac_was_set;
enum br2684_payload payload;
};
/*
* This lock should be held for writing any time the list of devices or
* their attached vcc's could be altered. It should be held for reading
* any time these are being queried. Note that we sometimes need to
* do read-locking under interrupt context, so write locking must block
* the current CPU's interrupts
*/
static DEFINE_RWLOCK(devs_lock);
static LIST_HEAD(br2684_devs);
static inline struct br2684_dev *BRPRIV(const struct net_device *net_dev)
{
return netdev_priv(net_dev);
}
static inline struct net_device *list_entry_brdev(const struct list_head *le)
{
return list_entry(le, struct br2684_dev, br2684_devs)->net_dev;
}
static inline struct br2684_vcc *BR2684_VCC(const struct atm_vcc *atmvcc)
{
return (struct br2684_vcc *)(atmvcc->user_back);
}
static inline struct br2684_vcc *list_entry_brvcc(const struct list_head *le)
{
return list_entry(le, struct br2684_vcc, brvccs);
}
/* Caller should hold read_lock(&devs_lock) */
static struct net_device *br2684_find_dev(const struct br2684_if_spec *s)
{
struct list_head *lh;
struct net_device *net_dev;
switch (s->method) {
case BR2684_FIND_BYNUM:
list_for_each(lh, &br2684_devs) {
net_dev = list_entry_brdev(lh);
if (BRPRIV(net_dev)->number == s->spec.devnum)
return net_dev;
}
break;
case BR2684_FIND_BYIFNAME:
list_for_each(lh, &br2684_devs) {
net_dev = list_entry_brdev(lh);
if (!strncmp(net_dev->name, s->spec.ifname, IFNAMSIZ))
return net_dev;
}
break;
}
return NULL;
}
static int atm_dev_event(struct notifier_block *this, unsigned long event,
void *arg)
{
struct atm_dev *atm_dev = arg;
struct list_head *lh;
struct net_device *net_dev;
struct br2684_vcc *brvcc;
struct atm_vcc *atm_vcc;
unsigned long flags;
pr_debug("event=%ld dev=%p\n", event, atm_dev);
read_lock_irqsave(&devs_lock, flags);
list_for_each(lh, &br2684_devs) {
net_dev = list_entry_brdev(lh);
list_for_each_entry(brvcc, &BRPRIV(net_dev)->brvccs, brvccs) {
atm_vcc = brvcc->atmvcc;
if (atm_vcc && brvcc->atmvcc->dev == atm_dev) {
if (atm_vcc->dev->signal == ATM_PHY_SIG_LOST)
netif_carrier_off(net_dev);
else
netif_carrier_on(net_dev);
}
}
}
read_unlock_irqrestore(&devs_lock, flags);
return NOTIFY_DONE;
}
static struct notifier_block atm_dev_notifier = {
.notifier_call = atm_dev_event,
};
/* chained vcc->pop function. Check if we should wake the netif_queue */
static void br2684_pop(struct atm_vcc *vcc, struct sk_buff *skb)
{
struct br2684_vcc *brvcc = BR2684_VCC(vcc);
pr_debug("(vcc %p ; net_dev %p )\n", vcc, brvcc->device);
brvcc->old_pop(vcc, skb);
/* If the queue space just went up from zero, wake */
if (atomic_inc_return(&brvcc->qspace) == 1)
netif_wake_queue(brvcc->device);
}
/*
* Send a packet out a particular vcc. Not to useful right now, but paves
* the way for multiple vcc's per itf. Returns true if we can send,
* otherwise false
*/
static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev,
struct br2684_vcc *brvcc)
{
struct br2684_dev *brdev = BRPRIV(dev);
struct atm_vcc *atmvcc;
int minheadroom = (brvcc->encaps == e_llc) ?
((brdev->payload == p_bridged) ?
sizeof(llc_oui_pid_pad) : sizeof(llc_oui_ipv4)) :
((brdev->payload == p_bridged) ? BR2684_PAD_LEN : 0);
if (skb_headroom(skb) < minheadroom) {
struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
brvcc->copies_needed++;
dev_kfree_skb(skb);
if (skb2 == NULL) {
brvcc->copies_failed++;
return 0;
}
skb = skb2;
}
if (brvcc->encaps == e_llc) {
if (brdev->payload == p_bridged) {
skb_push(skb, sizeof(llc_oui_pid_pad));
skb_copy_to_linear_data(skb, llc_oui_pid_pad,
sizeof(llc_oui_pid_pad));
} else if (brdev->payload == p_routed) {
unsigned short prot = ntohs(skb->protocol);
skb_push(skb, sizeof(llc_oui_ipv4));
switch (prot) {
case ETH_P_IP:
skb_copy_to_linear_data(skb, llc_oui_ipv4,
sizeof(llc_oui_ipv4));
break;
case ETH_P_IPV6:
skb_copy_to_linear_data(skb, llc_oui_ipv6,
sizeof(llc_oui_ipv6));
break;
default:
dev_kfree_skb(skb);
return 0;
}
}
} else { /* e_vc */
if (brdev->payload == p_bridged) {
skb_push(skb, 2);
memset(skb->data, 0, 2);
}
}
skb_debug(skb);
ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
atomic_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc);
ATM_SKB(skb)->atm_options = atmvcc->atm_options;
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
if (atomic_dec_return(&brvcc->qspace) < 1) {
/* No more please! */
netif_stop_queue(brvcc->device);
/* We might have raced with br2684_pop() */
if (unlikely(atomic_read(&brvcc->qspace) > 0))
netif_wake_queue(brvcc->device);
}
/* If this fails immediately, the skb will be freed and br2684_pop()
will wake the queue if appropriate. Just return an error so that
the stats are updated correctly */
return !atmvcc->send(atmvcc, skb);
}
static void br2684_release_cb(struct atm_vcc *atmvcc)
{
struct br2684_vcc *brvcc = BR2684_VCC(atmvcc);
if (atomic_read(&brvcc->qspace) > 0)
netif_wake_queue(brvcc->device);
if (brvcc->old_release_cb)
brvcc->old_release_cb(atmvcc);
}
static inline struct br2684_vcc *pick_outgoing_vcc(const struct sk_buff *skb,
const struct br2684_dev *brdev)
{
return list_empty(&brdev->brvccs) ? NULL : list_entry_brvcc(brdev->brvccs.next); /* 1 vcc/dev right now */
}
static netdev_tx_t br2684_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct br2684_dev *brdev = BRPRIV(dev);
struct br2684_vcc *brvcc;
struct atm_vcc *atmvcc;
netdev_tx_t ret = NETDEV_TX_OK;
pr_debug("skb_dst(skb)=%p\n", skb_dst(skb));
read_lock(&devs_lock);
brvcc = pick_outgoing_vcc(skb, brdev);
if (brvcc == NULL) {
pr_debug("no vcc attached to dev %s\n", dev->name);
dev->stats.tx_errors++;
dev->stats.tx_carrier_errors++;
/* netif_stop_queue(dev); */
dev_kfree_skb(skb);
goto out_devs;
}
atmvcc = brvcc->atmvcc;
bh_lock_sock(sk_atm(atmvcc));
if (test_bit(ATM_VF_RELEASED, &atmvcc->flags) ||
test_bit(ATM_VF_CLOSE, &atmvcc->flags) ||
!test_bit(ATM_VF_READY, &atmvcc->flags)) {
dev->stats.tx_dropped++;
dev_kfree_skb(skb);
goto out;
}
if (sock_owned_by_user(sk_atm(atmvcc))) {
netif_stop_queue(brvcc->device);
ret = NETDEV_TX_BUSY;
goto out;
}
if (!br2684_xmit_vcc(skb, dev, brvcc)) {
/*
* We should probably use netif_*_queue() here, but that
* involves added complication. We need to walk before
* we can run.
*
* Don't free here! this pointer might be no longer valid!
*/
dev->stats.tx_errors++;
dev->stats.tx_fifo_errors++;
}
out:
bh_unlock_sock(sk_atm(atmvcc));
out_devs:
read_unlock(&devs_lock);
return ret;
}
/*
* We remember when the MAC gets set, so we don't override it later with
* the ESI of the ATM card of the first VC
*/
static int br2684_mac_addr(struct net_device *dev, void *p)
{
int err = eth_mac_addr(dev, p);
if (!err)
BRPRIV(dev)->mac_was_set = 1;
return err;
}
#ifdef CONFIG_ATM_BR2684_IPFILTER
/* this IOCTL is experimental. */
static int br2684_setfilt(struct atm_vcc *atmvcc, void __user * arg)
{
struct br2684_vcc *brvcc;
struct br2684_filter_set fs;
if (copy_from_user(&fs, arg, sizeof fs))
return -EFAULT;
if (fs.ifspec.method != BR2684_FIND_BYNOTHING) {
/*
* This is really a per-vcc thing, but we can also search
* by device.
*/
struct br2684_dev *brdev;
read_lock(&devs_lock);
brdev = BRPRIV(br2684_find_dev(&fs.ifspec));
if (brdev == NULL || list_empty(&brdev->brvccs) ||
brdev->brvccs.next != brdev->brvccs.prev) /* >1 VCC */
brvcc = NULL;
else
brvcc = list_entry_brvcc(brdev->brvccs.next);
read_unlock(&devs_lock);
if (brvcc == NULL)
return -ESRCH;
} else
brvcc = BR2684_VCC(atmvcc);
memcpy(&brvcc->filter, &fs.filter, sizeof(brvcc->filter));
return 0;
}
/* Returns 1 if packet should be dropped */
static inline int
packet_fails_filter(__be16 type, struct br2684_vcc *brvcc, struct sk_buff *skb)
{
if (brvcc->filter.netmask == 0)
return 0; /* no filter in place */
if (type == htons(ETH_P_IP) &&
(((struct iphdr *)(skb->data))->daddr & brvcc->filter.
netmask) == brvcc->filter.prefix)
return 0;
if (type == htons(ETH_P_ARP))
return 0;
/*
* TODO: we should probably filter ARPs too.. don't want to have
* them returning values that don't make sense, or is that ok?
*/
return 1; /* drop */
}
#endif /* CONFIG_ATM_BR2684_IPFILTER */
static void br2684_close_vcc(struct br2684_vcc *brvcc)
{
pr_debug("removing VCC %p from dev %p\n", brvcc, brvcc->device);
write_lock_irq(&devs_lock);
list_del(&brvcc->brvccs);
write_unlock_irq(&devs_lock);
brvcc->atmvcc->user_back = NULL; /* what about vcc->recvq ??? */
brvcc->atmvcc->release_cb = brvcc->old_release_cb;
brvcc->old_push(brvcc->atmvcc, NULL); /* pass on the bad news */
module_put(brvcc->old_owner);
kfree(brvcc);
}
/* when AAL5 PDU comes in: */
static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
{
struct br2684_vcc *brvcc = BR2684_VCC(atmvcc);
struct net_device *net_dev = brvcc->device;
struct br2684_dev *brdev = BRPRIV(net_dev);
pr_debug("\n");
if (unlikely(skb == NULL)) {
/* skb==NULL means VCC is being destroyed */
br2684_close_vcc(brvcc);
if (list_empty(&brdev->brvccs)) {
write_lock_irq(&devs_lock);
list_del(&brdev->br2684_devs);
write_unlock_irq(&devs_lock);
unregister_netdev(net_dev);
free_netdev(net_dev);
}
return;
}
skb_debug(skb);
atm_return(atmvcc, skb->truesize);
pr_debug("skb from brdev %p\n", brdev);
if (brvcc->encaps == e_llc) {
if (skb->len > 7 && skb->data[7] == 0x01)
__skb_trim(skb, skb->len - 4);
/* accept packets that have "ipv[46]" in the snap header */
if ((skb->len >= (sizeof(llc_oui_ipv4))) &&
(memcmp(skb->data, llc_oui_ipv4,
sizeof(llc_oui_ipv4) - BR2684_ETHERTYPE_LEN) == 0)) {
if (memcmp(skb->data + 6, ethertype_ipv6,
sizeof(ethertype_ipv6)) == 0)
skb->protocol = htons(ETH_P_IPV6);
else if (memcmp(skb->data + 6, ethertype_ipv4,
sizeof(ethertype_ipv4)) == 0)
skb->protocol = htons(ETH_P_IP);
else
goto error;
skb_pull(skb, sizeof(llc_oui_ipv4));
skb_reset_network_header(skb);
skb->pkt_type = PACKET_HOST;
/*
* Let us waste some time for checking the encapsulation.
* Note, that only 7 char is checked so frames with a valid FCS
* are also accepted (but FCS is not checked of course).
*/
} else if ((skb->len >= sizeof(llc_oui_pid_pad)) &&
(memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) {
skb_pull(skb, sizeof(llc_oui_pid_pad));
skb->protocol = eth_type_trans(skb, net_dev);
} else
goto error;
} else { /* e_vc */
if (brdev->payload == p_routed) {
struct iphdr *iph;
skb_reset_network_header(skb);
iph = ip_hdr(skb);
if (iph->version == 4)
skb->protocol = htons(ETH_P_IP);
else if (iph->version == 6)
skb->protocol = htons(ETH_P_IPV6);
else
goto error;
skb->pkt_type = PACKET_HOST;
} else { /* p_bridged */
/* first 2 chars should be 0 */
if (memcmp(skb->data, pad, BR2684_PAD_LEN) != 0)
goto error;
skb_pull(skb, BR2684_PAD_LEN);
skb->protocol = eth_type_trans(skb, net_dev);
}
}
#ifdef CONFIG_ATM_BR2684_IPFILTER
if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb)))
goto dropped;
#endif /* CONFIG_ATM_BR2684_IPFILTER */
skb->dev = net_dev;
ATM_SKB(skb)->vcc = atmvcc; /* needed ? */
pr_debug("received packet's protocol: %x\n", ntohs(skb->protocol));
skb_debug(skb);
/* sigh, interface is down? */
if (unlikely(!(net_dev->flags & IFF_UP)))
goto dropped;
net_dev->stats.rx_packets++;
net_dev->stats.rx_bytes += skb->len;
memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
netif_rx(skb);
return;
dropped:
net_dev->stats.rx_dropped++;
goto free_skb;
error:
net_dev->stats.rx_errors++;
free_skb:
dev_kfree_skb(skb);
}
/*
* Assign a vcc to a dev
* Note: we do not have explicit unassign, but look at _push()
*/
static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
{
struct br2684_vcc *brvcc;
struct br2684_dev *brdev;
struct net_device *net_dev;
struct atm_backend_br2684 be;
int err;
if (copy_from_user(&be, arg, sizeof be))
return -EFAULT;
brvcc = kzalloc(sizeof(struct br2684_vcc), GFP_KERNEL);
if (!brvcc)
return -ENOMEM;
/*
* Allow two packets in the ATM queue. One actually being sent, and one
* for the ATM 'TX done' handler to send. It shouldn't take long to get
* the next one from the netdev queue, when we need it. More than that
* would be bufferbloat.
*/
atomic_set(&brvcc->qspace, 2);
write_lock_irq(&devs_lock);
net_dev = br2684_find_dev(&be.ifspec);
if (net_dev == NULL) {
pr_err("tried to attach to non-existent device\n");
err = -ENXIO;
goto error;
}
brdev = BRPRIV(net_dev);
if (atmvcc->push == NULL) {
err = -EBADFD;
goto error;
}
if (!list_empty(&brdev->brvccs)) {
/* Only 1 VCC/dev right now */
err = -EEXIST;
goto error;
}
if (be.fcs_in != BR2684_FCSIN_NO ||
be.fcs_out != BR2684_FCSOUT_NO ||
be.fcs_auto || be.has_vpiid || be.send_padding ||
(be.encaps != BR2684_ENCAPS_VC &&
be.encaps != BR2684_ENCAPS_LLC) ||
be.min_size != 0) {
err = -EINVAL;
goto error;
}
pr_debug("vcc=%p, encaps=%d, brvcc=%p\n", atmvcc, be.encaps, brvcc);
if (list_empty(&brdev->brvccs) && !brdev->mac_was_set) {
unsigned char *esi = atmvcc->dev->esi;
if (esi[0] | esi[1] | esi[2] | esi[3] | esi[4] | esi[5])
memcpy(net_dev->dev_addr, esi, net_dev->addr_len);
else
net_dev->dev_addr[2] = 1;
}
list_add(&brvcc->brvccs, &brdev->brvccs);
write_unlock_irq(&devs_lock);
brvcc->device = net_dev;
brvcc->atmvcc = atmvcc;
atmvcc->user_back = brvcc;
brvcc->encaps = (enum br2684_encaps)be.encaps;
brvcc->old_push = atmvcc->push;
brvcc->old_pop = atmvcc->pop;
brvcc->old_release_cb = atmvcc->release_cb;
brvcc->old_owner = atmvcc->owner;
barrier();
atmvcc->push = br2684_push;
atmvcc->pop = br2684_pop;
atmvcc->release_cb = br2684_release_cb;
atmvcc->owner = THIS_MODULE;
/* initialize netdev carrier state */
if (atmvcc->dev->signal == ATM_PHY_SIG_LOST)
netif_carrier_off(net_dev);
else
netif_carrier_on(net_dev);
__module_get(THIS_MODULE);
/* re-process everything received between connection setup and
backend setup */
vcc_process_recv_queue(atmvcc);
return 0;
error:
write_unlock_irq(&devs_lock);
kfree(brvcc);
return err;
}
static const struct net_device_ops br2684_netdev_ops = {
.ndo_start_xmit = br2684_start_xmit,
.ndo_set_mac_address = br2684_mac_addr,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
static const struct net_device_ops br2684_netdev_ops_routed = {
.ndo_start_xmit = br2684_start_xmit,
.ndo_set_mac_address = br2684_mac_addr,
.ndo_change_mtu = eth_change_mtu
};
static void br2684_setup(struct net_device *netdev)
{
struct br2684_dev *brdev = BRPRIV(netdev);
ether_setup(netdev);
netdev->hard_header_len += sizeof(llc_oui_pid_pad); /* worst case */
brdev->net_dev = netdev;
netdev->netdev_ops = &br2684_netdev_ops;
INIT_LIST_HEAD(&brdev->brvccs);
}
static void br2684_setup_routed(struct net_device *netdev)
{
struct br2684_dev *brdev = BRPRIV(netdev);
brdev->net_dev = netdev;
netdev->hard_header_len = sizeof(llc_oui_ipv4); /* worst case */
netdev->netdev_ops = &br2684_netdev_ops_routed;
netdev->addr_len = 0;
netdev->mtu = 1500;
netdev->type = ARPHRD_PPP;
netdev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
netdev->tx_queue_len = 100;
INIT_LIST_HEAD(&brdev->brvccs);
}
static int br2684_create(void __user *arg)
{
int err;
struct net_device *netdev;
struct br2684_dev *brdev;
struct atm_newif_br2684 ni;
enum br2684_payload payload;
pr_debug("\n");
if (copy_from_user(&ni, arg, sizeof ni))
return -EFAULT;
if (ni.media & BR2684_FLAG_ROUTED)
payload = p_routed;
else
payload = p_bridged;
ni.media &= 0xffff; /* strip flags */
if (ni.media != BR2684_MEDIA_ETHERNET || ni.mtu != 1500)
return -EINVAL;
netdev = alloc_netdev(sizeof(struct br2684_dev),
ni.ifname[0] ? ni.ifname : "nas%d",
(payload == p_routed) ?
br2684_setup_routed : br2684_setup);
if (!netdev)
return -ENOMEM;
brdev = BRPRIV(netdev);
pr_debug("registered netdev %s\n", netdev->name);
/* open, stop, do_ioctl ? */
err = register_netdev(netdev);
if (err < 0) {
pr_err("register_netdev failed\n");
free_netdev(netdev);
return err;
}
write_lock_irq(&devs_lock);
brdev->payload = payload;
if (list_empty(&br2684_devs)) {
/* 1st br2684 device */
brdev->number = 1;
} else
brdev->number = BRPRIV(list_entry_brdev(br2684_devs.prev))->number + 1;
list_add_tail(&brdev->br2684_devs, &br2684_devs);
write_unlock_irq(&devs_lock);
return 0;
}
/*
* This handles ioctls actually performed on our vcc - we must return
* -ENOIOCTLCMD for any unrecognized ioctl
*/
static int br2684_ioctl(struct socket *sock, unsigned int cmd,
unsigned long arg)
{
struct atm_vcc *atmvcc = ATM_SD(sock);
void __user *argp = (void __user *)arg;
atm_backend_t b;
int err;
switch (cmd) {
case ATM_SETBACKEND:
case ATM_NEWBACKENDIF:
err = get_user(b, (atm_backend_t __user *) argp);
if (err)
return -EFAULT;
if (b != ATM_BACKEND_BR2684)
return -ENOIOCTLCMD;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (cmd == ATM_SETBACKEND) {
if (sock->state != SS_CONNECTED)
return -EINVAL;
return br2684_regvcc(atmvcc, argp);
} else {
return br2684_create(argp);
}
#ifdef CONFIG_ATM_BR2684_IPFILTER
case BR2684_SETFILT:
if (atmvcc->push != br2684_push)
return -ENOIOCTLCMD;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
err = br2684_setfilt(atmvcc, argp);
return err;
#endif /* CONFIG_ATM_BR2684_IPFILTER */
}
return -ENOIOCTLCMD;
}
static struct atm_ioctl br2684_ioctl_ops = {
.owner = THIS_MODULE,
.ioctl = br2684_ioctl,
};
#ifdef CONFIG_PROC_FS
static void *br2684_seq_start(struct seq_file *seq, loff_t * pos)
__acquires(devs_lock)
{
read_lock(&devs_lock);
return seq_list_start(&br2684_devs, *pos);
}
static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t * pos)
{
return seq_list_next(v, &br2684_devs, pos);
}
static void br2684_seq_stop(struct seq_file *seq, void *v)
__releases(devs_lock)
{
read_unlock(&devs_lock);
}
static int br2684_seq_show(struct seq_file *seq, void *v)
{
const struct br2684_dev *brdev = list_entry(v, struct br2684_dev,
br2684_devs);
const struct net_device *net_dev = brdev->net_dev;
const struct br2684_vcc *brvcc;
seq_printf(seq, "dev %.16s: num=%d, mac=%pM (%s)\n",
net_dev->name,
brdev->number,
net_dev->dev_addr,
brdev->mac_was_set ? "set" : "auto");
list_for_each_entry(brvcc, &brdev->brvccs, brvccs) {
seq_printf(seq, " vcc %d.%d.%d: encaps=%s payload=%s"
", failed copies %u/%u"
"\n", brvcc->atmvcc->dev->number,
brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
(brvcc->encaps == e_llc) ? "LLC" : "VC",
(brdev->payload == p_bridged) ? "bridged" : "routed",
brvcc->copies_failed, brvcc->copies_needed);
#ifdef CONFIG_ATM_BR2684_IPFILTER
#define b1(var, byte) ((u8 *) &brvcc->filter.var)[byte]
#define bs(var) b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
if (brvcc->filter.netmask != 0)
seq_printf(seq, " filter=%d.%d.%d.%d/"
"%d.%d.%d.%d\n", bs(prefix), bs(netmask));
#undef bs
#undef b1
#endif /* CONFIG_ATM_BR2684_IPFILTER */
}
return 0;
}
static const struct seq_operations br2684_seq_ops = {
.start = br2684_seq_start,
.next = br2684_seq_next,
.stop = br2684_seq_stop,
.show = br2684_seq_show,
};
static int br2684_proc_open(struct inode *inode, struct file *file)
{
return seq_open(file, &br2684_seq_ops);
}
static const struct file_operations br2684_proc_ops = {
.owner = THIS_MODULE,
.open = br2684_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
extern struct proc_dir_entry *atm_proc_root; /* from proc.c */
#endif /* CONFIG_PROC_FS */
static int __init br2684_init(void)
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *p;
p = proc_create("br2684", 0, atm_proc_root, &br2684_proc_ops);
if (p == NULL)
return -ENOMEM;
#endif
register_atm_ioctl(&br2684_ioctl_ops);
register_atmdevice_notifier(&atm_dev_notifier);
return 0;
}
static void __exit br2684_exit(void)
{
struct net_device *net_dev;
struct br2684_dev *brdev;
struct br2684_vcc *brvcc;
deregister_atm_ioctl(&br2684_ioctl_ops);
#ifdef CONFIG_PROC_FS
remove_proc_entry("br2684", atm_proc_root);
#endif
unregister_atmdevice_notifier(&atm_dev_notifier);
while (!list_empty(&br2684_devs)) {
net_dev = list_entry_brdev(br2684_devs.next);
brdev = BRPRIV(net_dev);
while (!list_empty(&brdev->brvccs)) {
brvcc = list_entry_brvcc(brdev->brvccs.next);
br2684_close_vcc(brvcc);
}
list_del(&brdev->br2684_devs);
unregister_netdev(net_dev);
free_netdev(net_dev);
}
}
module_init(br2684_init);
module_exit(br2684_exit);
MODULE_AUTHOR("Marcell GAL");
MODULE_DESCRIPTION("RFC2684 bridged protocols over ATM/AAL5");
MODULE_LICENSE("GPL");