2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-08 21:53:54 +08:00
linux-next/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
Jun Gao c6c301d3ff dt-bindings: i2c: Add Mediatek MT2701 i2c binding
Add MT2701 i2c binding to i2c-mt6577.txt and there is no need to
modify i2c driver.

Signed-off-by: Jun Gao <jun.gao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-06-08 15:18:40 +02:00

42 lines
1.5 KiB
Plaintext

* Mediatek's I2C controller
The Mediatek's I2C controller is used to interface with I2C devices.
Required properties:
- compatible: value should be either of the following.
"mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701
"mediatek,mt6577-i2c": for i2c compatible with mt6577.
"mediatek,mt6589-i2c": for i2c compatible with mt6589.
"mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623.
"mediatek,mt8173-i2c": for i2c compatible with mt8173.
- reg: physical base address of the controller and dma base, length of memory
mapped region.
- interrupts: interrupt number to the cpu.
- clock-div: the fixed value for frequency divider of clock source in i2c
module. Each IC may be different.
- clocks: clock name from clock manager
- clock-names: Must include "main" and "dma", if enable have-pmic need include
"pmic" extra.
Optional properties:
- clock-frequency: Frequency in Hz of the bus when transfer, the default value
is 100000.
- mediatek,have-pmic: platform can control i2c form special pmic side.
Only mt6589 and mt8135 support this feature.
- mediatek,use-push-pull: IO config use push-pull mode.
Example:
i2c0: i2c@1100d000 {
compatible = "mediatek,mt6577-i2c";
reg = <0x1100d000 0x70>,
<0x11000300 0x80>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
clock-frequency = <400000>;
mediatek,have-pmic;
clock-div = <16>;
clocks = <&i2c0_ck>, <&ap_dma_ck>;
clock-names = "main", "dma";
};