renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 13:43:55 +08:00
Code
5cb0944c0c
linux-next/arch/s390/kernel/signal.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

541 lines
16 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright IBM Corp. 1999, 2006
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
*
* Based on Intel version
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
*/
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/tracehook.h>
#include <linux/syscalls.h>
#include <linux/compat.h>
#include <asm/ucontext.h>
#include <linux/uaccess.h>
#include <asm/lowcore.h>
#include <asm/switch_to.h>
#include "entry.h"
/*
* Layout of an old-style signal-frame:
* -----------------------------------------
* | save area (_SIGNAL_FRAMESIZE) |
* -----------------------------------------
* | struct sigcontext |
* | oldmask |
* | _sigregs * |
* -----------------------------------------
* | _sigregs with |
* | _s390_regs_common |
* | _s390_fp_regs |
* -----------------------------------------
* | int signo |
* -----------------------------------------
* | _sigregs_ext with |
* | gprs_high 64 byte (opt) |
* | vxrs_low 128 byte (opt) |
* | vxrs_high 256 byte (opt) |
* | reserved 128 byte (opt) |
* -----------------------------------------
* | __u16 svc_insn |
* -----------------------------------------
* The svc_insn entry with the sigreturn system call opcode does not
* have a fixed position and moves if gprs_high or vxrs exist.
* Future extensions will be added to _sigregs_ext.
*/
struct sigframe
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE];
struct sigcontext sc;
_sigregs sregs;
int signo;
_sigregs_ext sregs_ext;
__u16 svc_insn; /* Offset of svc_insn is NOT fixed! */
};
/*
* Layout of an rt signal-frame:
* -----------------------------------------
* | save area (_SIGNAL_FRAMESIZE) |
* -----------------------------------------
* | svc __NR_rt_sigreturn 2 byte |
* -----------------------------------------
* | struct siginfo |
* -----------------------------------------
* | struct ucontext_extended with |
* | unsigned long uc_flags |
* | struct ucontext *uc_link |
* | stack_t uc_stack |
* | _sigregs uc_mcontext with |
* | _s390_regs_common |
* | _s390_fp_regs |
* | sigset_t uc_sigmask |
* | _sigregs_ext uc_mcontext_ext |
* | gprs_high 64 byte (opt) |
* | vxrs_low 128 byte (opt) |
* | vxrs_high 256 byte (opt)|
* | reserved 128 byte (opt) |
* -----------------------------------------
* Future extensions will be added to _sigregs_ext.
*/
struct rt_sigframe
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE];
__u16 svc_insn;
struct siginfo info;
struct ucontext_extended uc;
};
/* Store registers needed to create the signal frame */
static void store_sigregs(void)
{
save_access_regs(current->thread.acrs);
save_fpu_regs();
}
/* Load registers after signal return */
static void load_sigregs(void)
{
restore_access_regs(current->thread.acrs);
}
/* Returns non-zero on fault. */
static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
{
_sigregs user_sregs;
/* Copy a 'clean' PSW mask to the user to avoid leaking
information about whether PER is currently on. */
user_sregs.regs.psw.mask = PSW_USER_BITS |
(regs->psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
user_sregs.regs.psw.addr = regs->psw.addr;
memcpy(&user_sregs.regs.gprs, &regs->gprs, sizeof(sregs->regs.gprs));
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
sizeof(user_sregs.regs.acrs));
fpregs_store(&user_sregs.fpregs, &current->thread.fpu);
if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs)))
return -EFAULT;
return 0;
}
static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
{
_sigregs user_sregs;
/* Alwys make any pending restarted system call return -EINTR */
current->restart_block.fn = do_no_restart_syscall;
if (__copy_from_user(&user_sregs, sregs, sizeof(user_sregs)))
return -EFAULT;
if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW_MASK_RI))
return -EINVAL;
/* Test the floating-point-control word. */
if (test_fp_ctl(user_sregs.fpregs.fpc))
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
/* Check for invalid user address space control. */
if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
regs->psw.mask = PSW_ASC_PRIMARY |
(regs->psw.mask & ~PSW_MASK_ASC);
/* Check for invalid amode */
if (regs->psw.mask & PSW_MASK_EA)
regs->psw.mask |= PSW_MASK_BA;
regs->psw.addr = user_sregs.regs.psw.addr;
memcpy(&regs->gprs, &user_sregs.regs.gprs, sizeof(sregs->regs.gprs));
memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
sizeof(current->thread.acrs));
fpregs_load(&user_sregs.fpregs, &current->thread.fpu);
clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */
return 0;
}
/* Returns non-zero on fault. */
static int save_sigregs_ext(struct pt_regs *regs,
_sigregs_ext __user *sregs_ext)
{
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Save vector registers to signal stack */
if (MACHINE_HAS_VX) {
for (i = 0; i < __NUM_VXRS_LOW; i++)
vxrs[i] = *((__u64 *)(current->thread.fpu.vxrs + i) + 1);
if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
sizeof(sregs_ext->vxrs_low)) ||
__copy_to_user(&sregs_ext->vxrs_high,
current->thread.fpu.vxrs + __NUM_VXRS_LOW,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
}
return 0;
}
static int restore_sigregs_ext(struct pt_regs *regs,
_sigregs_ext __user *sregs_ext)
{
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Restore vector registers from signal stack */
if (MACHINE_HAS_VX) {
if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
sizeof(sregs_ext->vxrs_low)) ||
__copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
&sregs_ext->vxrs_high,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
for (i = 0; i < __NUM_VXRS_LOW; i++)
*((__u64 *)(current->thread.fpu.vxrs + i) + 1) = vxrs[i];
}
return 0;
}
SYSCALL_DEFINE0(sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
struct sigframe __user *frame =
(struct sigframe __user *) regs->gprs[15];
sigset_t set;
if (__copy_from_user(&set.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE))
goto badframe;
set_current_blocked(&set);
save_fpu_regs();
if (restore_sigregs(regs, &frame->sregs))
goto badframe;
if (restore_sigregs_ext(regs, &frame->sregs_ext))
goto badframe;
load_sigregs();
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
SYSCALL_DEFINE0(rt_sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)regs->gprs[15];
sigset_t set;
if (__copy_from_user(&set.sig, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
set_current_blocked(&set);
if (restore_altstack(&frame->uc.uc_stack))
goto badframe;
save_fpu_regs();
if (restore_sigregs(regs, &frame->uc.uc_mcontext))
goto badframe;
if (restore_sigregs_ext(regs, &frame->uc.uc_mcontext_ext))
goto badframe;
load_sigregs();
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
/*
* Determine which stack to use..
*/
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
unsigned long sp;
/* Default to using normal stack */
sp = regs->gprs[15];
/* Overflow on alternate signal stack gives SIGSEGV. */
if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
return (void __user *) -1UL;
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (! sas_ss_flags(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
}
return (void __user *)((sp - frame_size) & -8ul);
}
static int setup_frame(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs * regs)
{
struct sigframe __user *frame;
struct sigcontext sc;
unsigned long restorer;
size_t frame_size;
/*
* gprs_high are only present for a 31-bit task running on
* a 64-bit kernel (see compat_signal.c) but the space for
* gprs_high need to be allocated if vector registers are
* included in the signal frame on a 31-bit system.
*/
frame_size = sizeof(*frame) - sizeof(frame->sregs_ext);
if (MACHINE_HAS_VX)
frame_size += sizeof(frame->sregs_ext);
frame = get_sigframe(ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (addr_t __user *) frame))
return -EFAULT;
/* Create struct sigcontext on the signal stack */
memcpy(&sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE);
sc.sregs = (_sigregs __user __force *) &frame->sregs;
if (__copy_to_user(&frame->sc, &sc, sizeof(frame->sc)))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create _sigregs on the signal stack */
if (save_sigregs(regs, &frame->sregs))
return -EFAULT;
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __user *) &frame->signo))
return -EFAULT;
/* Create _sigregs_ext on the signal stack */
if (save_sigregs_ext(regs, &frame->sregs_ext))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long) ka->sa.sa_restorer;
} else {
/* Signal frame without vector registers are short ! */
__u16 __user *svc = (void __user *) frame + frame_size - 2;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long) svc;
}
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (unsigned long) frame;
/* Force default amode and default user address space control. */
regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (unsigned long) ka->sa.sa_handler;
regs->gprs[2] = sig;
regs->gprs[3] = (unsigned long) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL ||
sig == SIGTRAP || sig == SIGFPE) {
/* set extra registers only for synchronous signals */
regs->gprs[4] = regs->int_code & 127;
regs->gprs[5] = regs->int_parm_long;
regs->gprs[6] = current->thread.last_break;
}
return 0;
}
static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long uc_flags, restorer;
size_t frame_size;
frame_size = sizeof(struct rt_sigframe) - sizeof(_sigregs_ext);
/*
* gprs_high are only present for a 31-bit task running on
* a 64-bit kernel (see compat_signal.c) but the space for
* gprs_high need to be allocated if vector registers are
* included in the signal frame on a 31-bit system.
*/
uc_flags = 0;
if (MACHINE_HAS_VX) {
frame_size += sizeof(_sigregs_ext);
uc_flags |= UC_VXRS;
}
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (addr_t __user *) frame))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long) ksig->ka.sa.sa_restorer;
} else {
__u16 __user *svc = &frame->svc_insn;
if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long) svc;
}
/* Create siginfo on the signal stack */
if (copy_siginfo_to_user(&frame->info, &ksig->info))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create ucontext on the signal stack. */
if (__put_user(uc_flags, &frame->uc.uc_flags) ||
__put_user(NULL, &frame->uc.uc_link) ||
__save_altstack(&frame->uc.uc_stack, regs->gprs[15]) ||
save_sigregs(regs, &frame->uc.uc_mcontext) ||
__copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)) ||
save_sigregs_ext(regs, &frame->uc.uc_mcontext_ext))
return -EFAULT;
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (unsigned long) frame;
/* Force default amode and default user address space control. */
regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (unsigned long) ksig->ka.sa.sa_handler;
regs->gprs[2] = ksig->sig;
regs->gprs[3] = (unsigned long) &frame->info;
regs->gprs[4] = (unsigned long) &frame->uc;
regs->gprs[5] = current->thread.last_break;
return 0;
}
static void handle_signal(struct ksignal *ksig, sigset_t *oldset,
struct pt_regs *regs)
{
int ret;
/* Set up the stack frame */
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame(ksig, oldset, regs);
else
ret = setup_frame(ksig->sig, &ksig->ka, oldset, regs);
signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLE_STEP));
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
void do_signal(struct pt_regs *regs)
{
struct ksignal ksig;
sigset_t *oldset = sigmask_to_save();
/*
* Get signal to deliver. When running under ptrace, at this point
* the debugger may change all our registers, including the system
* call information.
*/
current->thread.system_call =
test_pt_regs_flag(regs, PIF_SYSCALL) ? regs->int_code : 0;
if (get_signal(&ksig)) {
/* Whee! Actually deliver the signal. */
if (current->thread.system_call) {
regs->int_code = current->thread.system_call;
/* Check for system call restarting. */
switch (regs->gprs[2]) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->gprs[2] = -EINTR;
break;
case -ERESTARTSYS:
if (!(ksig.ka.sa.sa_flags & SA_RESTART)) {
regs->gprs[2] = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->gprs[2] = regs->orig_gpr2;
regs->psw.addr =
__rewind_psw(regs->psw,
regs->int_code >> 16);
break;
}
}
/* No longer in a system call */
clear_pt_regs_flag(regs, PIF_SYSCALL);
if (is_compat_task())
handle_signal32(&ksig, oldset, regs);
else
handle_signal(&ksig, oldset, regs);
return;
}
/* No handlers present - check for system call restart */
clear_pt_regs_flag(regs, PIF_SYSCALL);
if (current->thread.system_call) {
regs->int_code = current->thread.system_call;
switch (regs->gprs[2]) {
case -ERESTART_RESTARTBLOCK:
/* Restart with sys_restart_syscall */
regs->int_code = __NR_restart_syscall;
/* fallthrough */
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
/* Restart system call with magic TIF bit. */
regs->gprs[2] = regs->orig_gpr2;
set_pt_regs_flag(regs, PIF_SYSCALL);
if (test_thread_flag(TIF_SINGLE_STEP))
clear_pt_regs_flag(regs, PIF_PER_TRAP);
break;
}
}
/*
* If there's no signal to deliver, we just put the saved sigmask back.
*/
restore_saved_sigmask();
}
void do_notify_resume(struct pt_regs *regs)
{
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
View Git Blame Copy Permalink