mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
25130b8ad4
This patch adds mode table entry for capturing cropped 640x480 resolution Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
1482 lines
36 KiB
C
1482 lines
36 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* A V4L2 driver for Sony IMX219 cameras.
|
|
* Copyright (C) 2019, Raspberry Pi (Trading) Ltd
|
|
*
|
|
* Based on Sony imx258 camera driver
|
|
* Copyright (C) 2018 Intel Corporation
|
|
*
|
|
* DT / fwnode changes, and regulator / GPIO control taken from imx214 driver
|
|
* Copyright 2018 Qtechnology A/S
|
|
*
|
|
* Flip handling taken from the Sony IMX319 driver.
|
|
* Copyright (C) 2018 Intel Corporation
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-mediabus.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#define IMX219_REG_VALUE_08BIT 1
|
|
#define IMX219_REG_VALUE_16BIT 2
|
|
|
|
#define IMX219_REG_MODE_SELECT 0x0100
|
|
#define IMX219_MODE_STANDBY 0x00
|
|
#define IMX219_MODE_STREAMING 0x01
|
|
|
|
/* Chip ID */
|
|
#define IMX219_REG_CHIP_ID 0x0000
|
|
#define IMX219_CHIP_ID 0x0219
|
|
|
|
/* External clock frequency is 24.0M */
|
|
#define IMX219_XCLK_FREQ 24000000
|
|
|
|
/* Pixel rate is fixed at 182.4M for all the modes */
|
|
#define IMX219_PIXEL_RATE 182400000
|
|
|
|
#define IMX219_DEFAULT_LINK_FREQ 456000000
|
|
|
|
/* V_TIMING internal */
|
|
#define IMX219_REG_VTS 0x0160
|
|
#define IMX219_VTS_15FPS 0x0dc6
|
|
#define IMX219_VTS_30FPS_1080P 0x06e3
|
|
#define IMX219_VTS_30FPS_BINNED 0x06e3
|
|
#define IMX219_VTS_30FPS_640x480 0x06e3
|
|
#define IMX219_VTS_MAX 0xffff
|
|
|
|
#define IMX219_VBLANK_MIN 4
|
|
|
|
/*Frame Length Line*/
|
|
#define IMX219_FLL_MIN 0x08a6
|
|
#define IMX219_FLL_MAX 0xffff
|
|
#define IMX219_FLL_STEP 1
|
|
#define IMX219_FLL_DEFAULT 0x0c98
|
|
|
|
/* HBLANK control - read only */
|
|
#define IMX219_PPL_DEFAULT 3448
|
|
|
|
/* Exposure control */
|
|
#define IMX219_REG_EXPOSURE 0x015a
|
|
#define IMX219_EXPOSURE_MIN 4
|
|
#define IMX219_EXPOSURE_STEP 1
|
|
#define IMX219_EXPOSURE_DEFAULT 0x640
|
|
#define IMX219_EXPOSURE_MAX 65535
|
|
|
|
/* Analog gain control */
|
|
#define IMX219_REG_ANALOG_GAIN 0x0157
|
|
#define IMX219_ANA_GAIN_MIN 0
|
|
#define IMX219_ANA_GAIN_MAX 232
|
|
#define IMX219_ANA_GAIN_STEP 1
|
|
#define IMX219_ANA_GAIN_DEFAULT 0x0
|
|
|
|
/* Digital gain control */
|
|
#define IMX219_REG_DIGITAL_GAIN 0x0158
|
|
#define IMX219_DGTL_GAIN_MIN 0x0100
|
|
#define IMX219_DGTL_GAIN_MAX 0x0fff
|
|
#define IMX219_DGTL_GAIN_DEFAULT 0x0100
|
|
#define IMX219_DGTL_GAIN_STEP 1
|
|
|
|
#define IMX219_REG_ORIENTATION 0x0172
|
|
|
|
/* Test Pattern Control */
|
|
#define IMX219_REG_TEST_PATTERN 0x0600
|
|
#define IMX219_TEST_PATTERN_DISABLE 0
|
|
#define IMX219_TEST_PATTERN_SOLID_COLOR 1
|
|
#define IMX219_TEST_PATTERN_COLOR_BARS 2
|
|
#define IMX219_TEST_PATTERN_GREY_COLOR 3
|
|
#define IMX219_TEST_PATTERN_PN9 4
|
|
|
|
/* Test pattern colour components */
|
|
#define IMX219_REG_TESTP_RED 0x0602
|
|
#define IMX219_REG_TESTP_GREENR 0x0604
|
|
#define IMX219_REG_TESTP_BLUE 0x0606
|
|
#define IMX219_REG_TESTP_GREENB 0x0608
|
|
#define IMX219_TESTP_COLOUR_MIN 0
|
|
#define IMX219_TESTP_COLOUR_MAX 0x03ff
|
|
#define IMX219_TESTP_COLOUR_STEP 1
|
|
#define IMX219_TESTP_RED_DEFAULT IMX219_TESTP_COLOUR_MAX
|
|
#define IMX219_TESTP_GREENR_DEFAULT 0
|
|
#define IMX219_TESTP_BLUE_DEFAULT 0
|
|
#define IMX219_TESTP_GREENB_DEFAULT 0
|
|
|
|
struct imx219_reg {
|
|
u16 address;
|
|
u8 val;
|
|
};
|
|
|
|
struct imx219_reg_list {
|
|
unsigned int num_of_regs;
|
|
const struct imx219_reg *regs;
|
|
};
|
|
|
|
/* Mode : resolution and related config&values */
|
|
struct imx219_mode {
|
|
/* Frame width */
|
|
unsigned int width;
|
|
/* Frame height */
|
|
unsigned int height;
|
|
|
|
/* V-timing */
|
|
unsigned int vts_def;
|
|
|
|
/* Default register values */
|
|
struct imx219_reg_list reg_list;
|
|
};
|
|
|
|
/*
|
|
* Register sets lifted off the i2C interface from the Raspberry Pi firmware
|
|
* driver.
|
|
* 3280x2464 = mode 2, 1920x1080 = mode 1, 1640x1232 = mode 4, 640x480 = mode 7.
|
|
*/
|
|
static const struct imx219_reg mode_3280x2464_regs[] = {
|
|
{0x0100, 0x00},
|
|
{0x30eb, 0x0c},
|
|
{0x30eb, 0x05},
|
|
{0x300a, 0xff},
|
|
{0x300b, 0xff},
|
|
{0x30eb, 0x05},
|
|
{0x30eb, 0x09},
|
|
{0x0114, 0x01},
|
|
{0x0128, 0x00},
|
|
{0x012a, 0x18},
|
|
{0x012b, 0x00},
|
|
{0x0164, 0x00},
|
|
{0x0165, 0x00},
|
|
{0x0166, 0x0c},
|
|
{0x0167, 0xcf},
|
|
{0x0168, 0x00},
|
|
{0x0169, 0x00},
|
|
{0x016a, 0x09},
|
|
{0x016b, 0x9f},
|
|
{0x016c, 0x0c},
|
|
{0x016d, 0xd0},
|
|
{0x016e, 0x09},
|
|
{0x016f, 0xa0},
|
|
{0x0170, 0x01},
|
|
{0x0171, 0x01},
|
|
{0x0174, 0x00},
|
|
{0x0175, 0x00},
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x01},
|
|
{0x0304, 0x03},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x39},
|
|
{0x030b, 0x01},
|
|
{0x030c, 0x00},
|
|
{0x030d, 0x72},
|
|
{0x0624, 0x0c},
|
|
{0x0625, 0xd0},
|
|
{0x0626, 0x09},
|
|
{0x0627, 0xa0},
|
|
{0x455e, 0x00},
|
|
{0x471e, 0x4b},
|
|
{0x4767, 0x0f},
|
|
{0x4750, 0x14},
|
|
{0x4540, 0x00},
|
|
{0x47b4, 0x14},
|
|
{0x4713, 0x30},
|
|
{0x478b, 0x10},
|
|
{0x478f, 0x10},
|
|
{0x4793, 0x10},
|
|
{0x4797, 0x0e},
|
|
{0x479b, 0x0e},
|
|
{0x0162, 0x0d},
|
|
{0x0163, 0x78},
|
|
};
|
|
|
|
static const struct imx219_reg mode_1920_1080_regs[] = {
|
|
{0x0100, 0x00},
|
|
{0x30eb, 0x05},
|
|
{0x30eb, 0x0c},
|
|
{0x300a, 0xff},
|
|
{0x300b, 0xff},
|
|
{0x30eb, 0x05},
|
|
{0x30eb, 0x09},
|
|
{0x0114, 0x01},
|
|
{0x0128, 0x00},
|
|
{0x012a, 0x18},
|
|
{0x012b, 0x00},
|
|
{0x0162, 0x0d},
|
|
{0x0163, 0x78},
|
|
{0x0164, 0x02},
|
|
{0x0165, 0xa8},
|
|
{0x0166, 0x0a},
|
|
{0x0167, 0x27},
|
|
{0x0168, 0x02},
|
|
{0x0169, 0xb4},
|
|
{0x016a, 0x06},
|
|
{0x016b, 0xeb},
|
|
{0x016c, 0x07},
|
|
{0x016d, 0x80},
|
|
{0x016e, 0x04},
|
|
{0x016f, 0x38},
|
|
{0x0170, 0x01},
|
|
{0x0171, 0x01},
|
|
{0x0174, 0x00},
|
|
{0x0175, 0x00},
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x01},
|
|
{0x0304, 0x03},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x39},
|
|
{0x030b, 0x01},
|
|
{0x030c, 0x00},
|
|
{0x030d, 0x72},
|
|
{0x0624, 0x07},
|
|
{0x0625, 0x80},
|
|
{0x0626, 0x04},
|
|
{0x0627, 0x38},
|
|
{0x455e, 0x00},
|
|
{0x471e, 0x4b},
|
|
{0x4767, 0x0f},
|
|
{0x4750, 0x14},
|
|
{0x4540, 0x00},
|
|
{0x47b4, 0x14},
|
|
{0x4713, 0x30},
|
|
{0x478b, 0x10},
|
|
{0x478f, 0x10},
|
|
{0x4793, 0x10},
|
|
{0x4797, 0x0e},
|
|
{0x479b, 0x0e},
|
|
{0x0162, 0x0d},
|
|
{0x0163, 0x78},
|
|
};
|
|
|
|
static const struct imx219_reg mode_1640_1232_regs[] = {
|
|
{0x0100, 0x00},
|
|
{0x30eb, 0x0c},
|
|
{0x30eb, 0x05},
|
|
{0x300a, 0xff},
|
|
{0x300b, 0xff},
|
|
{0x30eb, 0x05},
|
|
{0x30eb, 0x09},
|
|
{0x0114, 0x01},
|
|
{0x0128, 0x00},
|
|
{0x012a, 0x18},
|
|
{0x012b, 0x00},
|
|
{0x0164, 0x00},
|
|
{0x0165, 0x00},
|
|
{0x0166, 0x0c},
|
|
{0x0167, 0xcf},
|
|
{0x0168, 0x00},
|
|
{0x0169, 0x00},
|
|
{0x016a, 0x09},
|
|
{0x016b, 0x9f},
|
|
{0x016c, 0x06},
|
|
{0x016d, 0x68},
|
|
{0x016e, 0x04},
|
|
{0x016f, 0xd0},
|
|
{0x0170, 0x01},
|
|
{0x0171, 0x01},
|
|
{0x0174, 0x01},
|
|
{0x0175, 0x01},
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x01},
|
|
{0x0304, 0x03},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x39},
|
|
{0x030b, 0x01},
|
|
{0x030c, 0x00},
|
|
{0x030d, 0x72},
|
|
{0x0624, 0x06},
|
|
{0x0625, 0x68},
|
|
{0x0626, 0x04},
|
|
{0x0627, 0xd0},
|
|
{0x455e, 0x00},
|
|
{0x471e, 0x4b},
|
|
{0x4767, 0x0f},
|
|
{0x4750, 0x14},
|
|
{0x4540, 0x00},
|
|
{0x47b4, 0x14},
|
|
{0x4713, 0x30},
|
|
{0x478b, 0x10},
|
|
{0x478f, 0x10},
|
|
{0x4793, 0x10},
|
|
{0x4797, 0x0e},
|
|
{0x479b, 0x0e},
|
|
{0x0162, 0x0d},
|
|
{0x0163, 0x78},
|
|
};
|
|
|
|
static const struct imx219_reg mode_640_480_regs[] = {
|
|
{0x0100, 0x00},
|
|
{0x30eb, 0x05},
|
|
{0x30eb, 0x0c},
|
|
{0x300a, 0xff},
|
|
{0x300b, 0xff},
|
|
{0x30eb, 0x05},
|
|
{0x30eb, 0x09},
|
|
{0x0114, 0x01},
|
|
{0x0128, 0x00},
|
|
{0x012a, 0x18},
|
|
{0x012b, 0x00},
|
|
{0x0162, 0x0d},
|
|
{0x0163, 0x78},
|
|
{0x0164, 0x03},
|
|
{0x0165, 0xe8},
|
|
{0x0166, 0x08},
|
|
{0x0167, 0xe7},
|
|
{0x0168, 0x02},
|
|
{0x0169, 0xf0},
|
|
{0x016a, 0x06},
|
|
{0x016b, 0xaf},
|
|
{0x016c, 0x02},
|
|
{0x016d, 0x80},
|
|
{0x016e, 0x01},
|
|
{0x016f, 0xe0},
|
|
{0x0170, 0x01},
|
|
{0x0171, 0x01},
|
|
{0x0174, 0x03},
|
|
{0x0175, 0x03},
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x01},
|
|
{0x0304, 0x03},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x39},
|
|
{0x030b, 0x01},
|
|
{0x030c, 0x00},
|
|
{0x030d, 0x72},
|
|
{0x0624, 0x06},
|
|
{0x0625, 0x68},
|
|
{0x0626, 0x04},
|
|
{0x0627, 0xd0},
|
|
{0x455e, 0x00},
|
|
{0x471e, 0x4b},
|
|
{0x4767, 0x0f},
|
|
{0x4750, 0x14},
|
|
{0x4540, 0x00},
|
|
{0x47b4, 0x14},
|
|
{0x4713, 0x30},
|
|
{0x478b, 0x10},
|
|
{0x478f, 0x10},
|
|
{0x4793, 0x10},
|
|
{0x4797, 0x0e},
|
|
{0x479b, 0x0e},
|
|
};
|
|
|
|
static const struct imx219_reg raw8_framefmt_regs[] = {
|
|
{0x018c, 0x08},
|
|
{0x018d, 0x08},
|
|
{0x0309, 0x08},
|
|
};
|
|
|
|
static const struct imx219_reg raw10_framefmt_regs[] = {
|
|
{0x018c, 0x0a},
|
|
{0x018d, 0x0a},
|
|
{0x0309, 0x0a},
|
|
};
|
|
|
|
static const char * const imx219_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Color Bars",
|
|
"Solid Color",
|
|
"Grey Color Bars",
|
|
"PN9"
|
|
};
|
|
|
|
static const int imx219_test_pattern_val[] = {
|
|
IMX219_TEST_PATTERN_DISABLE,
|
|
IMX219_TEST_PATTERN_COLOR_BARS,
|
|
IMX219_TEST_PATTERN_SOLID_COLOR,
|
|
IMX219_TEST_PATTERN_GREY_COLOR,
|
|
IMX219_TEST_PATTERN_PN9,
|
|
};
|
|
|
|
/* regulator supplies */
|
|
static const char * const imx219_supply_name[] = {
|
|
/* Supplies can be enabled in any order */
|
|
"VANA", /* Analog (2.8V) supply */
|
|
"VDIG", /* Digital Core (1.8V) supply */
|
|
"VDDL", /* IF (1.2V) supply */
|
|
};
|
|
|
|
#define IMX219_NUM_SUPPLIES ARRAY_SIZE(imx219_supply_name)
|
|
|
|
/*
|
|
* The supported formats.
|
|
* This table MUST contain 4 entries per format, to cover the various flip
|
|
* combinations in the order
|
|
* - no flip
|
|
* - h flip
|
|
* - v flip
|
|
* - h&v flips
|
|
*/
|
|
static const u32 codes[] = {
|
|
MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
MEDIA_BUS_FMT_SGRBG10_1X10,
|
|
MEDIA_BUS_FMT_SGBRG10_1X10,
|
|
MEDIA_BUS_FMT_SBGGR10_1X10,
|
|
|
|
MEDIA_BUS_FMT_SRGGB8_1X8,
|
|
MEDIA_BUS_FMT_SGRBG8_1X8,
|
|
MEDIA_BUS_FMT_SGBRG8_1X8,
|
|
MEDIA_BUS_FMT_SBGGR8_1X8,
|
|
};
|
|
|
|
/*
|
|
* Initialisation delay between XCLR low->high and the moment when the sensor
|
|
* can start capture (i.e. can leave software stanby) must be not less than:
|
|
* t4 + max(t5, t6 + <time to initialize the sensor register over I2C>)
|
|
* where
|
|
* t4 is fixed, and is max 200uS,
|
|
* t5 is fixed, and is 6000uS,
|
|
* t6 depends on the sensor external clock, and is max 32000 clock periods.
|
|
* As per sensor datasheet, the external clock must be from 6MHz to 27MHz.
|
|
* So for any acceptable external clock t6 is always within the range of
|
|
* 1185 to 5333 uS, and is always less than t5.
|
|
* For this reason this is always safe to wait (t4 + t5) = 6200 uS, then
|
|
* initialize the sensor over I2C, and then exit the software standby.
|
|
*
|
|
* This start-up time can be optimized a bit more, if we start the writes
|
|
* over I2C after (t4+t6), but before (t4+t5) expires. But then sensor
|
|
* initialization over I2C may complete before (t4+t5) expires, and we must
|
|
* ensure that capture is not started before (t4+t5).
|
|
*
|
|
* This delay doesn't account for the power supply startup time. If needed,
|
|
* this should be taken care of via the regulator framework. E.g. in the
|
|
* case of DT for regulator-fixed one should define the startup-delay-us
|
|
* property.
|
|
*/
|
|
#define IMX219_XCLR_MIN_DELAY_US 6200
|
|
#define IMX219_XCLR_DELAY_RANGE_US 1000
|
|
|
|
/* Mode configs */
|
|
static const struct imx219_mode supported_modes[] = {
|
|
{
|
|
/* 8MPix 15fps mode */
|
|
.width = 3280,
|
|
.height = 2464,
|
|
.vts_def = IMX219_VTS_15FPS,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
|
|
.regs = mode_3280x2464_regs,
|
|
},
|
|
},
|
|
{
|
|
/* 1080P 30fps cropped */
|
|
.width = 1920,
|
|
.height = 1080,
|
|
.vts_def = IMX219_VTS_30FPS_1080P,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
|
|
.regs = mode_1920_1080_regs,
|
|
},
|
|
},
|
|
{
|
|
/* 2x2 binned 30fps mode */
|
|
.width = 1640,
|
|
.height = 1232,
|
|
.vts_def = IMX219_VTS_30FPS_BINNED,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
|
|
.regs = mode_1640_1232_regs,
|
|
},
|
|
},
|
|
{
|
|
/* 640x480 30fps mode */
|
|
.width = 640,
|
|
.height = 480,
|
|
.vts_def = IMX219_VTS_30FPS_640x480,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_640_480_regs),
|
|
.regs = mode_640_480_regs,
|
|
},
|
|
},
|
|
};
|
|
|
|
struct imx219 {
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
|
|
struct v4l2_mbus_framefmt fmt;
|
|
|
|
struct clk *xclk; /* system clock to IMX219 */
|
|
u32 xclk_freq;
|
|
|
|
struct gpio_desc *reset_gpio;
|
|
struct regulator_bulk_data supplies[IMX219_NUM_SUPPLIES];
|
|
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
/* V4L2 Controls */
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *vflip;
|
|
struct v4l2_ctrl *hflip;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *hblank;
|
|
|
|
/* Current mode */
|
|
const struct imx219_mode *mode;
|
|
|
|
/*
|
|
* Mutex for serialized access:
|
|
* Protect sensor module set pad format and start/stop streaming safely.
|
|
*/
|
|
struct mutex mutex;
|
|
|
|
/* Streaming on/off */
|
|
bool streaming;
|
|
};
|
|
|
|
static inline struct imx219 *to_imx219(struct v4l2_subdev *_sd)
|
|
{
|
|
return container_of(_sd, struct imx219, sd);
|
|
}
|
|
|
|
/* Read registers up to 2 at a time */
|
|
static int imx219_read_reg(struct imx219 *imx219, u16 reg, u32 len, u32 *val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
struct i2c_msg msgs[2];
|
|
u8 addr_buf[2] = { reg >> 8, reg & 0xff };
|
|
u8 data_buf[4] = { 0, };
|
|
int ret;
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
/* Write register address */
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = ARRAY_SIZE(addr_buf);
|
|
msgs[0].buf = addr_buf;
|
|
|
|
/* Read data from register */
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = &data_buf[4 - len];
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*val = get_unaligned_be32(data_buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write registers up to 2 at a time */
|
|
static int imx219_write_reg(struct imx219 *imx219, u16 reg, u32 len, u32 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
u8 buf[6];
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, buf);
|
|
put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write a list of registers */
|
|
static int imx219_write_regs(struct imx219 *imx219,
|
|
const struct imx219_reg *regs, u32 len)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
ret = imx219_write_reg(imx219, regs[i].address, 1, regs[i].val);
|
|
if (ret) {
|
|
dev_err_ratelimited(&client->dev,
|
|
"Failed to write reg 0x%4.4x. error = %d\n",
|
|
regs[i].address, ret);
|
|
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Get bayer order based on flip setting. */
|
|
static u32 imx219_get_format_code(struct imx219 *imx219, u32 code)
|
|
{
|
|
unsigned int i;
|
|
|
|
lockdep_assert_held(&imx219->mutex);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(codes); i++)
|
|
if (codes[i] == code)
|
|
break;
|
|
|
|
if (i >= ARRAY_SIZE(codes))
|
|
i = 0;
|
|
|
|
i = (i & ~3) | (imx219->vflip->val ? 2 : 0) |
|
|
(imx219->hflip->val ? 1 : 0);
|
|
|
|
return codes[i];
|
|
}
|
|
|
|
static void imx219_set_default_format(struct imx219 *imx219)
|
|
{
|
|
struct v4l2_mbus_framefmt *fmt;
|
|
|
|
fmt = &imx219->fmt;
|
|
fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10;
|
|
fmt->colorspace = V4L2_COLORSPACE_SRGB;
|
|
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
|
|
fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
fmt->colorspace,
|
|
fmt->ycbcr_enc);
|
|
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
|
|
fmt->width = supported_modes[0].width;
|
|
fmt->height = supported_modes[0].height;
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
}
|
|
|
|
static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(sd, fh->pad, 0);
|
|
|
|
mutex_lock(&imx219->mutex);
|
|
|
|
/* Initialize try_fmt */
|
|
try_fmt->width = supported_modes[0].width;
|
|
try_fmt->height = supported_modes[0].height;
|
|
try_fmt->code = imx219_get_format_code(imx219,
|
|
MEDIA_BUS_FMT_SRGGB10_1X10);
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
|
|
mutex_unlock(&imx219->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct imx219 *imx219 =
|
|
container_of(ctrl->handler, struct imx219, ctrl_handler);
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
int ret;
|
|
|
|
if (ctrl->id == V4L2_CID_VBLANK) {
|
|
int exposure_max, exposure_def;
|
|
|
|
/* Update max exposure while meeting expected vblanking */
|
|
exposure_max = imx219->mode->height + ctrl->val - 4;
|
|
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
|
|
exposure_max : IMX219_EXPOSURE_DEFAULT;
|
|
__v4l2_ctrl_modify_range(imx219->exposure,
|
|
imx219->exposure->minimum,
|
|
exposure_max, imx219->exposure->step,
|
|
exposure_def);
|
|
}
|
|
|
|
/*
|
|
* Applying V4L2 control value only happens
|
|
* when power is up for streaming
|
|
*/
|
|
if (pm_runtime_get_if_in_use(&client->dev) == 0)
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_ANALOG_GAIN,
|
|
IMX219_REG_VALUE_08BIT, ctrl->val);
|
|
break;
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_EXPOSURE,
|
|
IMX219_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_DIGITAL_GAIN,
|
|
IMX219_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_TEST_PATTERN,
|
|
IMX219_REG_VALUE_16BIT,
|
|
imx219_test_pattern_val[ctrl->val]);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
case V4L2_CID_VFLIP:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_ORIENTATION, 1,
|
|
imx219->hflip->val |
|
|
imx219->vflip->val << 1);
|
|
break;
|
|
case V4L2_CID_VBLANK:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_VTS,
|
|
IMX219_REG_VALUE_16BIT,
|
|
imx219->mode->height + ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_RED:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_RED,
|
|
IMX219_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_GREENR:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_GREENR,
|
|
IMX219_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_BLUE:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_BLUE,
|
|
IMX219_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_GREENB:
|
|
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_GREENB,
|
|
IMX219_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
default:
|
|
dev_info(&client->dev,
|
|
"ctrl(id:0x%x,val:0x%x) is not handled\n",
|
|
ctrl->id, ctrl->val);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
|
|
.s_ctrl = imx219_set_ctrl,
|
|
};
|
|
|
|
static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
|
|
if (code->index >= (ARRAY_SIZE(codes) / 4))
|
|
return -EINVAL;
|
|
|
|
code->code = imx219_get_format_code(imx219, codes[code->index * 4]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx219_enum_frame_size(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fse->code != imx219_get_format_code(imx219, imx219->fmt.code))
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = fse->min_width;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
fse->max_height = fse->min_height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx219_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
fmt->colorspace = V4L2_COLORSPACE_SRGB;
|
|
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
|
|
fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
fmt->colorspace,
|
|
fmt->ycbcr_enc);
|
|
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
|
|
}
|
|
|
|
static void imx219_update_pad_format(struct imx219 *imx219,
|
|
const struct imx219_mode *mode,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
imx219_reset_colorspace(&fmt->format);
|
|
}
|
|
|
|
static int __imx219_get_pad_format(struct imx219 *imx219,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(&imx219->sd, cfg, fmt->pad);
|
|
/* update the code which could change due to vflip or hflip: */
|
|
try_fmt->code = imx219_get_format_code(imx219, try_fmt->code);
|
|
fmt->format = *try_fmt;
|
|
} else {
|
|
imx219_update_pad_format(imx219, imx219->mode, fmt);
|
|
fmt->format.code = imx219_get_format_code(imx219,
|
|
imx219->fmt.code);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx219_get_pad_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
int ret;
|
|
|
|
mutex_lock(&imx219->mutex);
|
|
ret = __imx219_get_pad_format(imx219, cfg, fmt);
|
|
mutex_unlock(&imx219->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx219_set_pad_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
const struct imx219_mode *mode;
|
|
struct v4l2_mbus_framefmt *framefmt;
|
|
int exposure_max, exposure_def, hblank;
|
|
unsigned int i;
|
|
|
|
mutex_lock(&imx219->mutex);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(codes); i++)
|
|
if (codes[i] == fmt->format.code)
|
|
break;
|
|
if (i >= ARRAY_SIZE(codes))
|
|
i = 0;
|
|
|
|
/* Bayer order varies with flips */
|
|
fmt->format.code = imx219_get_format_code(imx219, codes[i]);
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
ARRAY_SIZE(supported_modes),
|
|
width, height,
|
|
fmt->format.width, fmt->format.height);
|
|
imx219_update_pad_format(imx219, mode, fmt);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
|
|
*framefmt = fmt->format;
|
|
} else if (imx219->mode != mode ||
|
|
imx219->fmt.code != fmt->format.code) {
|
|
imx219->fmt = fmt->format;
|
|
imx219->mode = mode;
|
|
/* Update limits and set FPS to default */
|
|
__v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
|
|
IMX219_VTS_MAX - mode->height, 1,
|
|
mode->vts_def - mode->height);
|
|
__v4l2_ctrl_s_ctrl(imx219->vblank,
|
|
mode->vts_def - mode->height);
|
|
/* Update max exposure while meeting expected vblanking */
|
|
exposure_max = mode->vts_def - 4;
|
|
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
|
|
exposure_max : IMX219_EXPOSURE_DEFAULT;
|
|
__v4l2_ctrl_modify_range(imx219->exposure,
|
|
imx219->exposure->minimum,
|
|
exposure_max, imx219->exposure->step,
|
|
exposure_def);
|
|
/*
|
|
* Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank
|
|
* depends on mode->width only, and is not changeble in any
|
|
* way other than changing the mode.
|
|
*/
|
|
hblank = IMX219_PPL_DEFAULT - mode->width;
|
|
__v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1,
|
|
hblank);
|
|
}
|
|
|
|
mutex_unlock(&imx219->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx219_set_framefmt(struct imx219 *imx219)
|
|
{
|
|
switch (imx219->fmt.code) {
|
|
case MEDIA_BUS_FMT_SRGGB8_1X8:
|
|
case MEDIA_BUS_FMT_SGRBG8_1X8:
|
|
case MEDIA_BUS_FMT_SGBRG8_1X8:
|
|
case MEDIA_BUS_FMT_SBGGR8_1X8:
|
|
return imx219_write_regs(imx219, raw8_framefmt_regs,
|
|
ARRAY_SIZE(raw8_framefmt_regs));
|
|
|
|
case MEDIA_BUS_FMT_SRGGB10_1X10:
|
|
case MEDIA_BUS_FMT_SGRBG10_1X10:
|
|
case MEDIA_BUS_FMT_SGBRG10_1X10:
|
|
case MEDIA_BUS_FMT_SBGGR10_1X10:
|
|
return imx219_write_regs(imx219, raw10_framefmt_regs,
|
|
ARRAY_SIZE(raw10_framefmt_regs));
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int imx219_start_streaming(struct imx219 *imx219)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
const struct imx219_reg_list *reg_list;
|
|
int ret;
|
|
|
|
/* Apply default values of current mode */
|
|
reg_list = &imx219->mode->reg_list;
|
|
ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s failed to set mode\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = imx219_set_framefmt(imx219);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s failed to set frame format: %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Apply customized values from user */
|
|
ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* set stream on register */
|
|
return imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
|
|
IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
|
|
}
|
|
|
|
static void imx219_stop_streaming(struct imx219 *imx219)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
int ret;
|
|
|
|
/* set stream off register */
|
|
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
|
|
IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
|
|
if (ret)
|
|
dev_err(&client->dev, "%s failed to set stream\n", __func__);
|
|
}
|
|
|
|
static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&imx219->mutex);
|
|
if (imx219->streaming == enable) {
|
|
mutex_unlock(&imx219->mutex);
|
|
return 0;
|
|
}
|
|
|
|
if (enable) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto err_unlock;
|
|
}
|
|
|
|
/*
|
|
* Apply default & customized values
|
|
* and then start streaming.
|
|
*/
|
|
ret = imx219_start_streaming(imx219);
|
|
if (ret)
|
|
goto err_rpm_put;
|
|
} else {
|
|
imx219_stop_streaming(imx219);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
imx219->streaming = enable;
|
|
|
|
/* vflip and hflip cannot change during streaming */
|
|
__v4l2_ctrl_grab(imx219->vflip, enable);
|
|
__v4l2_ctrl_grab(imx219->hflip, enable);
|
|
|
|
mutex_unlock(&imx219->mutex);
|
|
|
|
return ret;
|
|
|
|
err_rpm_put:
|
|
pm_runtime_put(&client->dev);
|
|
err_unlock:
|
|
mutex_unlock(&imx219->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Power/clock management functions */
|
|
static int imx219_power_on(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES,
|
|
imx219->supplies);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s: failed to enable regulators\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx219->xclk);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s: failed to enable clock\n",
|
|
__func__);
|
|
goto reg_off;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(imx219->reset_gpio, 1);
|
|
usleep_range(IMX219_XCLR_MIN_DELAY_US,
|
|
IMX219_XCLR_MIN_DELAY_US + IMX219_XCLR_DELAY_RANGE_US);
|
|
|
|
return 0;
|
|
|
|
reg_off:
|
|
regulator_bulk_disable(IMX219_NUM_SUPPLIES, imx219->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx219_power_off(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
|
|
gpiod_set_value_cansleep(imx219->reset_gpio, 0);
|
|
regulator_bulk_disable(IMX219_NUM_SUPPLIES, imx219->supplies);
|
|
clk_disable_unprepare(imx219->xclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx219_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
|
|
if (imx219->streaming)
|
|
imx219_stop_streaming(imx219);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx219_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
int ret;
|
|
|
|
if (imx219->streaming) {
|
|
ret = imx219_start_streaming(imx219);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error:
|
|
imx219_stop_streaming(imx219);
|
|
imx219->streaming = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx219_get_regulators(struct imx219 *imx219)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < IMX219_NUM_SUPPLIES; i++)
|
|
imx219->supplies[i].supply = imx219_supply_name[i];
|
|
|
|
return devm_regulator_bulk_get(&client->dev,
|
|
IMX219_NUM_SUPPLIES,
|
|
imx219->supplies);
|
|
}
|
|
|
|
/* Verify chip ID */
|
|
static int imx219_identify_module(struct imx219 *imx219)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = imx219_read_reg(imx219, IMX219_REG_CHIP_ID,
|
|
IMX219_REG_VALUE_16BIT, &val);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to read chip id %x\n",
|
|
IMX219_CHIP_ID);
|
|
return ret;
|
|
}
|
|
|
|
if (val != IMX219_CHIP_ID) {
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
|
|
IMX219_CHIP_ID, val);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_core_ops imx219_core_ops = {
|
|
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
|
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops imx219_video_ops = {
|
|
.s_stream = imx219_set_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
|
|
.enum_mbus_code = imx219_enum_mbus_code,
|
|
.get_fmt = imx219_get_pad_format,
|
|
.set_fmt = imx219_set_pad_format,
|
|
.enum_frame_size = imx219_enum_frame_size,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops imx219_subdev_ops = {
|
|
.core = &imx219_core_ops,
|
|
.video = &imx219_video_ops,
|
|
.pad = &imx219_pad_ops,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
|
|
.open = imx219_open,
|
|
};
|
|
|
|
/* Initialize control handlers */
|
|
static int imx219_init_controls(struct imx219 *imx219)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
unsigned int height = imx219->mode->height;
|
|
int exposure_max, exposure_def, hblank;
|
|
int i, ret;
|
|
|
|
ctrl_hdlr = &imx219->ctrl_handler;
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 9);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_init(&imx219->mutex);
|
|
ctrl_hdlr->lock = &imx219->mutex;
|
|
|
|
/* By default, PIXEL_RATE is read only */
|
|
imx219->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE,
|
|
IMX219_PIXEL_RATE,
|
|
IMX219_PIXEL_RATE, 1,
|
|
IMX219_PIXEL_RATE);
|
|
|
|
/* Initial vblank/hblank/exposure parameters based on current mode */
|
|
imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
|
|
IMX219_VTS_MAX - height, 1,
|
|
imx219->mode->vts_def - height);
|
|
hblank = IMX219_PPL_DEFAULT - imx219->mode->width;
|
|
imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_HBLANK, hblank, hblank,
|
|
1, hblank);
|
|
if (imx219->hblank)
|
|
imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
exposure_max = imx219->mode->vts_def - 4;
|
|
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
|
|
exposure_max : IMX219_EXPOSURE_DEFAULT;
|
|
imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
IMX219_EXPOSURE_MIN, exposure_max,
|
|
IMX219_EXPOSURE_STEP,
|
|
exposure_def);
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
IMX219_ANA_GAIN_MIN, IMX219_ANA_GAIN_MAX,
|
|
IMX219_ANA_GAIN_STEP, IMX219_ANA_GAIN_DEFAULT);
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
IMX219_DGTL_GAIN_MIN, IMX219_DGTL_GAIN_MAX,
|
|
IMX219_DGTL_GAIN_STEP, IMX219_DGTL_GAIN_DEFAULT);
|
|
|
|
imx219->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
if (imx219->hflip)
|
|
imx219->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
|
|
imx219->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
if (imx219->vflip)
|
|
imx219->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(imx219_test_pattern_menu) - 1,
|
|
0, 0, imx219_test_pattern_menu);
|
|
for (i = 0; i < 4; i++) {
|
|
/*
|
|
* The assumption is that
|
|
* V4L2_CID_TEST_PATTERN_GREENR == V4L2_CID_TEST_PATTERN_RED + 1
|
|
* V4L2_CID_TEST_PATTERN_BLUE == V4L2_CID_TEST_PATTERN_RED + 2
|
|
* V4L2_CID_TEST_PATTERN_GREENB == V4L2_CID_TEST_PATTERN_RED + 3
|
|
*/
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN_RED + i,
|
|
IMX219_TESTP_COLOUR_MIN,
|
|
IMX219_TESTP_COLOUR_MAX,
|
|
IMX219_TESTP_COLOUR_STEP,
|
|
IMX219_TESTP_COLOUR_MAX);
|
|
/* The "Solid color" pattern is white by default */
|
|
}
|
|
|
|
if (ctrl_hdlr->error) {
|
|
ret = ctrl_hdlr->error;
|
|
dev_err(&client->dev, "%s control init failed (%d)\n",
|
|
__func__, ret);
|
|
goto error;
|
|
}
|
|
|
|
imx219->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
v4l2_ctrl_handler_free(ctrl_hdlr);
|
|
mutex_destroy(&imx219->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx219_free_controls(struct imx219 *imx219)
|
|
{
|
|
v4l2_ctrl_handler_free(imx219->sd.ctrl_handler);
|
|
mutex_destroy(&imx219->mutex);
|
|
}
|
|
|
|
static int imx219_check_hwcfg(struct device *dev)
|
|
{
|
|
struct fwnode_handle *endpoint;
|
|
struct v4l2_fwnode_endpoint ep_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
};
|
|
int ret = -EINVAL;
|
|
|
|
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
|
|
if (!endpoint) {
|
|
dev_err(dev, "endpoint node not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg)) {
|
|
dev_err(dev, "could not parse endpoint\n");
|
|
goto error_out;
|
|
}
|
|
|
|
/* Check the number of MIPI CSI2 data lanes */
|
|
if (ep_cfg.bus.mipi_csi2.num_data_lanes != 2) {
|
|
dev_err(dev, "only 2 data lanes are currently supported\n");
|
|
goto error_out;
|
|
}
|
|
|
|
/* Check the link frequency set in device tree */
|
|
if (!ep_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "link-frequency property not found in DT\n");
|
|
goto error_out;
|
|
}
|
|
|
|
if (ep_cfg.nr_of_link_frequencies != 1 ||
|
|
ep_cfg.link_frequencies[0] != IMX219_DEFAULT_LINK_FREQ) {
|
|
dev_err(dev, "Link frequency not supported: %lld\n",
|
|
ep_cfg.link_frequencies[0]);
|
|
goto error_out;
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
error_out:
|
|
v4l2_fwnode_endpoint_free(&ep_cfg);
|
|
fwnode_handle_put(endpoint);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx219_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct imx219 *imx219;
|
|
int ret;
|
|
|
|
imx219 = devm_kzalloc(&client->dev, sizeof(*imx219), GFP_KERNEL);
|
|
if (!imx219)
|
|
return -ENOMEM;
|
|
|
|
v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops);
|
|
|
|
/* Check the hardware configuration in device tree */
|
|
if (imx219_check_hwcfg(dev))
|
|
return -EINVAL;
|
|
|
|
/* Get system clock (xclk) */
|
|
imx219->xclk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(imx219->xclk)) {
|
|
dev_err(dev, "failed to get xclk\n");
|
|
return PTR_ERR(imx219->xclk);
|
|
}
|
|
|
|
imx219->xclk_freq = clk_get_rate(imx219->xclk);
|
|
if (imx219->xclk_freq != IMX219_XCLK_FREQ) {
|
|
dev_err(dev, "xclk frequency not supported: %d Hz\n",
|
|
imx219->xclk_freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = imx219_get_regulators(imx219);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Request optional enable pin */
|
|
imx219->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_HIGH);
|
|
|
|
/*
|
|
* The sensor must be powered for imx219_identify_module()
|
|
* to be able to read the CHIP_ID register
|
|
*/
|
|
ret = imx219_power_on(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = imx219_identify_module(imx219);
|
|
if (ret)
|
|
goto error_power_off;
|
|
|
|
/* Set default mode to max resolution */
|
|
imx219->mode = &supported_modes[0];
|
|
|
|
/* sensor doesn't enter LP-11 state upon power up until and unless
|
|
* streaming is started, so upon power up switch the modes to:
|
|
* streaming -> standby
|
|
*/
|
|
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
|
|
IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
|
|
if (ret < 0)
|
|
goto error_power_off;
|
|
usleep_range(100, 110);
|
|
|
|
/* put sensor back to standby mode */
|
|
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
|
|
IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
|
|
if (ret < 0)
|
|
goto error_power_off;
|
|
usleep_range(100, 110);
|
|
|
|
ret = imx219_init_controls(imx219);
|
|
if (ret)
|
|
goto error_power_off;
|
|
|
|
/* Initialize subdev */
|
|
imx219->sd.internal_ops = &imx219_internal_ops;
|
|
imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
/* Initialize source pad */
|
|
imx219->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
/* Initialize default format */
|
|
imx219_set_default_format(imx219);
|
|
|
|
ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad);
|
|
if (ret) {
|
|
dev_err(dev, "failed to init entity pads: %d\n", ret);
|
|
goto error_handler_free;
|
|
}
|
|
|
|
ret = v4l2_async_register_subdev_sensor_common(&imx219->sd);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
|
|
goto error_media_entity;
|
|
}
|
|
|
|
/* Enable runtime PM and turn off the device */
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_idle(dev);
|
|
|
|
return 0;
|
|
|
|
error_media_entity:
|
|
media_entity_cleanup(&imx219->sd.entity);
|
|
|
|
error_handler_free:
|
|
imx219_free_controls(imx219);
|
|
|
|
error_power_off:
|
|
imx219_power_off(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx219_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx219 *imx219 = to_imx219(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
imx219_free_controls(imx219);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
if (!pm_runtime_status_suspended(&client->dev))
|
|
imx219_power_off(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id imx219_dt_ids[] = {
|
|
{ .compatible = "sony,imx219" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx219_dt_ids);
|
|
|
|
static const struct dev_pm_ops imx219_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(imx219_suspend, imx219_resume)
|
|
SET_RUNTIME_PM_OPS(imx219_power_off, imx219_power_on, NULL)
|
|
};
|
|
|
|
static struct i2c_driver imx219_i2c_driver = {
|
|
.driver = {
|
|
.name = "imx219",
|
|
.of_match_table = imx219_dt_ids,
|
|
.pm = &imx219_pm_ops,
|
|
},
|
|
.probe_new = imx219_probe,
|
|
.remove = imx219_remove,
|
|
};
|
|
|
|
module_i2c_driver(imx219_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.com");
|
|
MODULE_DESCRIPTION("Sony IMX219 sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|