renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code
5c3cf47c20
linux-next/arch/arm/mach-s3c24xx/common.c
Heiko Stuebner 1fecf8958e ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 
s3c2410 and s3c2442 share the same dma channels while s3c2440 has
slight differences. But on all three the reachable sources per dma
channel has constraints attached and thus encodes the usable
combinations using the S3C24XX_DMA_CHANREQ macro.

This also fixes the warning about s3c2410_dma_resource being unused
as reported by Olof Johansson.

Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-21 05:32:48 +09:00

538 lines
16 KiB
C
Raw Blame History

/* linux/arch/arm/plat-s3c24xx/cpu.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
* Ben Dooks <ben@simtec.co.uk>
*
* Common code for S3C24XX machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
#include <asm/system_info.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
#include <plat/pwm-core.h>
#include "common.h"
/* table of supported CPUs */
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2416[] = "S3C2416/S3C2450";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2442b[] = "S3C2442B";
static const char name_s3c2443[] = "S3C2443";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32410000,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410
},
{
.idcode = 0x32410002,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410a_init,
.name = name_s3c2410a
},
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440
},
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
},
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442
},
{
.idcode = 0x32440aab,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442b
},
{
.idcode = 0x32412001,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
.init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
},
{ /* a newer version of the s3c2412 */
.idcode = 0x32412003,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
.init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
},
{ /* a strange version of the s3c2416 */
.idcode = 0x32450003,
.idmask = 0xffffffff,
.map_io = s3c2416_map_io,
.init_clocks = s3c2416_init_clocks,
.init_uarts = s3c2416_init_uarts,
.init = s3c2416_init,
.name = name_s3c2416,
},
{
.idcode = 0x32443001,
.idmask = 0xffffffff,
.map_io = s3c2443_map_io,
.init_clocks = s3c2443_init_clocks,
.init_uarts = s3c2443_init_uarts,
.init = s3c2443_init,
.name = name_s3c2443,
},
};
/* minimal IO mapping */
static struct map_desc s3c_iodesc[] __initdata = {
IODESC_ENT(GPIO),
IODESC_ENT(IRQ),
IODESC_ENT(MEMCTRL),
IODESC_ENT(UART)
};
/* read cpu identificaiton code */
static unsigned long s3c24xx_read_idcode_v5(void)
{
#if defined(CONFIG_CPU_S3C2416)
/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
u32 gs = __raw_readl(S3C24XX_GSTATUS1);
/* test for s3c2416 or similar device */
if ((gs >> 16) == 0x3245)
return gs;
#endif
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
return __raw_readl(S3C2412_GSTATUS1);
#else
return 1UL; /* don't look like an 2400 */
#endif
}
static unsigned long s3c24xx_read_idcode_v4(void)
{
return __raw_readl(S3C2410_GSTATUS1);
}
static void s3c24xx_default_idle(void)
{
unsigned long tmp = 0;
int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
/* Warning: going into idle state upsets jtag scanning */
__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++)
tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
/* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
}
static struct samsung_pwm_variant s3c24xx_pwm_variant = {
.bits = 16,
.div_base = 1,
.has_tint_cstat = false,
.tclk_mask = (1 << 4),
};
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
arm_pm_idle = s3c24xx_default_idle;
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
samsung_cpu_id = s3c24xx_read_idcode_v5();
} else {
samsung_cpu_id = s3c24xx_read_idcode_v4();
}
s3c24xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
}
void __init samsung_set_timer_source(unsigned int event, unsigned int source)
{
s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
void __init samsung_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
};
samsung_pwm_clocksource_init(S3C_VA_TIMER,
timer_irqs, &s3c24xx_pwm_variant);
}
/* Serial port registrations */
#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 )
static struct resource s3c2410_uart0_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
NULL, IORESOURCE_IRQ)
};
static struct resource s3c2410_uart1_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
NULL, IORESOURCE_IRQ)
};
static struct resource s3c2410_uart2_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
NULL, IORESOURCE_IRQ)
};
static struct resource s3c2410_uart3_resource[] = {
[0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
NULL, IORESOURCE_IRQ)
};
struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
[0] = {
.resources = s3c2410_uart0_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
},
[1] = {
.resources = s3c2410_uart1_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
},
[2] = {
.resources = s3c2410_uart2_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
},
[3] = {
.resources = s3c2410_uart3_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
},
};
/* initialise all the clocks */
void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
unsigned long pclk)
{
clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
clk_xtal.rate);
clk_mpll.rate = fclk;
clk_h.rate = hclk;
clk_p.rate = pclk;
clk_f.rate = fclk;
}
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
static struct resource s3c2410_dma_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
[1] = DEFINE_RES_IRQ(IRQ_DMA0),
[2] = DEFINE_RES_IRQ(IRQ_DMA1),
[3] = DEFINE_RES_IRQ(IRQ_DMA2),
[4] = DEFINE_RES_IRQ(IRQ_DMA3),
};
#endif
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
S3C24XX_DMA_CHANREQ(2, 2) |
S3C24XX_DMA_CHANREQ(1, 3),
},
[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
S3C24XX_DMA_CHANREQ(3, 2) |
S3C24XX_DMA_CHANREQ(3, 3),
},
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
S3C24XX_DMA_CHANREQ(1, 2),
},
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2410_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2410_device_dma = {
.name = "s3c2410-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2410_dma_platdata,
},
};
#endif
#ifdef CONFIG_CPU_S3C2412
static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
};
static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2412_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2412_device_dma = {
.name = "s3c2412-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2412_dma_platdata,
},
};
#endif
#if defined(CONFIG_CPU_S3C2440)
static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
S3C24XX_DMA_CHANREQ(6, 1) |
S3C24XX_DMA_CHANREQ(2, 2) |
S3C24XX_DMA_CHANREQ(1, 3),
},
[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
S3C24XX_DMA_CHANREQ(3, 2) |
S3C24XX_DMA_CHANREQ(3, 3),
},
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
S3C24XX_DMA_CHANREQ(1, 2),
},
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
S3C24XX_DMA_CHANREQ(0, 2),
},
[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
S3C24XX_DMA_CHANREQ(5, 2),
},
[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
S3C24XX_DMA_CHANREQ(6, 3),
},
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
S3C24XX_DMA_CHANREQ(5, 3),
},
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2440_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2440_device_dma = {
.name = "s3c2410-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2440_dma_platdata,
},
};
#endif
#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
static struct resource s3c2443_dma_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
};
static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
};
static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
.num_phy_channels = 6,
.channels = s3c2443_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2443_device_dma = {
.name = "s3c2443-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2443_dma_resource),
.resource = s3c2443_dma_resource,
.dev = {
.platform_data = &s3c2443_dma_platdata,
},
};
#endif
View Git Blame Copy Permalink