2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 08:44:14 +08:00
linux-next/drivers/bcma/driver_chipcommon_sflash.c
Brian Norris 5651d6aaf4 mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR()
Using KSEG0ADDR makes code highly MIPS dependent and not portable.
Thanks to the fix a68f376 ("MIPS: io.h: Define `ioremap_cache'") we can
use ioremap_cache which is generic and supported on MIPS as well now.

KSEG0ADDR was translating 0x1c000000 into 0x9c000000. With ioremap_cache
we use MIPS's __ioremap (and then remap_area_pages). This results in
different address (e.g. 0xc0080000) but it still should be cached as
expected and it was successfully tested with BCM47186B0.

Other than that drivers/bcma/driver_chipcommon_sflash.c nicely setups a
struct resource for access window, but we wren't using it. Use it now
and drop duplicated info.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-04-04 00:07:57 -07:00

166 lines
4.2 KiB
C

/*
* Broadcom specific AMBA
* ChipCommon serial flash interface
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include "bcma_private.h"
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
.start = BCMA_SOC_FLASH2,
.end = 0,
.flags = IORESOURCE_MEM | IORESOURCE_READONLY,
};
struct platform_device bcma_sflash_dev = {
.name = "bcma_sflash",
.resource = &bcma_sflash_resource,
.num_resources = 1,
};
struct bcma_sflash_tbl_e {
char *name;
u32 id;
u32 blocksize;
u16 numblocks;
};
static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
{ "M25P20", 0x11, 0x10000, 4, },
{ "M25P40", 0x12, 0x10000, 8, },
{ "M25P16", 0x14, 0x10000, 32, },
{ "M25P32", 0x15, 0x10000, 64, },
{ "M25P64", 0x16, 0x10000, 128, },
{ "M25FL128", 0x17, 0x10000, 256, },
{ "MX25L25635F", 0x18, 0x10000, 512, },
{ NULL },
};
static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
{ "SST25WF010", 2, 0x1000, 32, },
{ "SST25VF010", 0x49, 0x1000, 32, },
{ "SST25WF020", 3, 0x1000, 64, },
{ "SST25VF020", 0x43, 0x1000, 64, },
{ "SST25WF040", 4, 0x1000, 128, },
{ "SST25VF040", 0x44, 0x1000, 128, },
{ "SST25VF040B", 0x8d, 0x1000, 128, },
{ "SST25WF080", 5, 0x1000, 256, },
{ "SST25VF080B", 0x8e, 0x1000, 256, },
{ "SST25VF016", 0x41, 0x1000, 512, },
{ "SST25VF032", 0x4a, 0x1000, 1024, },
{ "SST25VF064", 0x4b, 0x1000, 2048, },
{ NULL },
};
static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
{ "AT45DB011", 0xc, 256, 512, },
{ "AT45DB021", 0x14, 256, 1024, },
{ "AT45DB041", 0x1c, 256, 2048, },
{ "AT45DB081", 0x24, 256, 4096, },
{ "AT45DB161", 0x2c, 512, 4096, },
{ "AT45DB321", 0x34, 512, 8192, },
{ "AT45DB642", 0x3c, 1024, 8192, },
{ NULL },
};
static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
{
int i;
bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
BCMA_CC_FLASHCTL_START | opcode);
for (i = 0; i < 1000; i++) {
if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) &
BCMA_CC_FLASHCTL_BUSY))
return;
cpu_relax();
}
bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}
/* Initialize serial flash access */
int bcma_sflash_init(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
struct bcma_sflash *sflash = &cc->sflash;
const struct bcma_sflash_tbl_e *e;
u32 id, id2;
switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
switch (id) {
case 0xbf:
for (e = bcma_sflash_sst_tbl; e->name; e++) {
if (e->id == id2)
break;
}
break;
case 0x13:
return -ENOTSUPP;
default:
for (e = bcma_sflash_st_tbl; e->name; e++) {
if (e->id == id)
break;
}
break;
}
if (!e->name) {
bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
return -ENOTSUPP;
}
break;
case BCMA_CC_FLASHT_ATSER:
bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
for (e = bcma_sflash_at_tbl; e->name; e++) {
if (e->id == id)
break;
}
if (!e->name) {
bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id);
return -ENOTSUPP;
}
break;
default:
bcma_err(bus, "Unsupported flash type\n");
return -ENOTSUPP;
}
sflash->blocksize = e->blocksize;
sflash->numblocks = e->numblocks;
sflash->size = sflash->blocksize * sflash->numblocks;
sflash->present = true;
bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
e->name, sflash->size / 1024, sflash->blocksize,
sflash->numblocks);
/* Prepare platform device, but don't register it yet. It's too early,
* malloc (required by device_private_init) is not available yet. */
bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start +
sflash->size;
bcma_sflash_dev.dev.platform_data = sflash;
return 0;
}