mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
4875647a08
The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
233 lines
7.7 KiB
C
233 lines
7.7 KiB
C
/******************************************************************************
|
|
*******************************************************************************
|
|
**
|
|
** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
|
|
** Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved.
|
|
**
|
|
** This copyrighted material is made available to anyone wishing to use,
|
|
** modify, copy, or redistribute it subject to the terms and conditions
|
|
** of the GNU General Public License v.2.
|
|
**
|
|
*******************************************************************************
|
|
******************************************************************************/
|
|
|
|
#ifndef __DLM_DOT_H__
|
|
#define __DLM_DOT_H__
|
|
|
|
/*
|
|
* Interface to Distributed Lock Manager (DLM)
|
|
* routines and structures to use DLM lockspaces
|
|
*/
|
|
|
|
/* Lock levels and flags are here */
|
|
#include <linux/dlmconstants.h>
|
|
#include <linux/types.h>
|
|
|
|
typedef void dlm_lockspace_t;
|
|
|
|
/*
|
|
* Lock status block
|
|
*
|
|
* Use this structure to specify the contents of the lock value block. For a
|
|
* conversion request, this structure is used to specify the lock ID of the
|
|
* lock. DLM writes the status of the lock request and the lock ID assigned
|
|
* to the request in the lock status block.
|
|
*
|
|
* sb_lkid: the returned lock ID. It is set on new (non-conversion) requests.
|
|
* It is available when dlm_lock returns.
|
|
*
|
|
* sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
|
|
* shown for the DLM_LKF_VALBLK flag.
|
|
*
|
|
* sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
|
|
* it was first demoted to NL to avoid conversion deadlock.
|
|
* DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
|
|
*
|
|
* sb_status: the returned status of the lock request set prior to AST
|
|
* execution. Possible return values:
|
|
*
|
|
* 0 if lock request was successful
|
|
* -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
|
|
* -DLM_EUNLOCK if unlock request was successful
|
|
* -DLM_ECANCEL if a cancel completed successfully
|
|
* -EDEADLK if a deadlock was detected
|
|
* -ETIMEDOUT if the lock request was canceled due to a timeout
|
|
*/
|
|
|
|
#define DLM_SBF_DEMOTED 0x01
|
|
#define DLM_SBF_VALNOTVALID 0x02
|
|
#define DLM_SBF_ALTMODE 0x04
|
|
|
|
struct dlm_lksb {
|
|
int sb_status;
|
|
__u32 sb_lkid;
|
|
char sb_flags;
|
|
char * sb_lvbptr;
|
|
};
|
|
|
|
/* dlm_new_lockspace() flags */
|
|
|
|
#define DLM_LSFL_TIMEWARN 0x00000002
|
|
#define DLM_LSFL_FS 0x00000004
|
|
#define DLM_LSFL_NEWEXCL 0x00000008
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
struct dlm_slot {
|
|
int nodeid; /* 1 to MAX_INT */
|
|
int slot; /* 1 to MAX_INT */
|
|
};
|
|
|
|
/*
|
|
* recover_prep: called before the dlm begins lock recovery.
|
|
* Notfies lockspace user that locks from failed members will be granted.
|
|
* recover_slot: called after recover_prep and before recover_done.
|
|
* Identifies a failed lockspace member.
|
|
* recover_done: called after the dlm completes lock recovery.
|
|
* Identifies lockspace members and lockspace generation number.
|
|
*/
|
|
|
|
struct dlm_lockspace_ops {
|
|
void (*recover_prep) (void *ops_arg);
|
|
void (*recover_slot) (void *ops_arg, struct dlm_slot *slot);
|
|
void (*recover_done) (void *ops_arg, struct dlm_slot *slots,
|
|
int num_slots, int our_slot, uint32_t generation);
|
|
};
|
|
|
|
/*
|
|
* dlm_new_lockspace
|
|
*
|
|
* Create/join a lockspace.
|
|
*
|
|
* name: lockspace name, null terminated, up to DLM_LOCKSPACE_LEN (not
|
|
* including terminating null).
|
|
*
|
|
* cluster: cluster name, null terminated, up to DLM_LOCKSPACE_LEN (not
|
|
* including terminating null). Optional. When cluster is null, it
|
|
* is not used. When set, dlm_new_lockspace() returns -EBADR if cluster
|
|
* is not equal to the dlm cluster name.
|
|
*
|
|
* flags:
|
|
* DLM_LSFL_NODIR
|
|
* The dlm should not use a resource directory, but statically assign
|
|
* resource mastery to nodes based on the name hash that is otherwise
|
|
* used to select the directory node. Must be the same on all nodes.
|
|
* DLM_LSFL_TIMEWARN
|
|
* The dlm should emit netlink messages if locks have been waiting
|
|
* for a configurable amount of time. (Unused.)
|
|
* DLM_LSFL_FS
|
|
* The lockspace user is in the kernel (i.e. filesystem). Enables
|
|
* direct bast/cast callbacks.
|
|
* DLM_LSFL_NEWEXCL
|
|
* dlm_new_lockspace() should return -EEXIST if the lockspace exists.
|
|
*
|
|
* lvblen: length of lvb in bytes. Must be multiple of 8.
|
|
* dlm_new_lockspace() returns an error if this does not match
|
|
* what other nodes are using.
|
|
*
|
|
* ops: callbacks that indicate lockspace recovery points so the
|
|
* caller can coordinate its recovery and know lockspace members.
|
|
* This is only used by the initial dlm_new_lockspace() call.
|
|
* Optional.
|
|
*
|
|
* ops_arg: arg for ops callbacks.
|
|
*
|
|
* ops_result: tells caller if the ops callbacks (if provided) will
|
|
* be used or not. 0: will be used, -EXXX will not be used.
|
|
* -EOPNOTSUPP: the dlm does not have recovery_callbacks enabled.
|
|
*
|
|
* lockspace: handle for dlm functions
|
|
*/
|
|
|
|
int dlm_new_lockspace(const char *name, const char *cluster,
|
|
uint32_t flags, int lvblen,
|
|
const struct dlm_lockspace_ops *ops, void *ops_arg,
|
|
int *ops_result, dlm_lockspace_t **lockspace);
|
|
|
|
/*
|
|
* dlm_release_lockspace
|
|
*
|
|
* Stop a lockspace.
|
|
*/
|
|
|
|
int dlm_release_lockspace(dlm_lockspace_t *lockspace, int force);
|
|
|
|
/*
|
|
* dlm_lock
|
|
*
|
|
* Make an asyncronous request to acquire or convert a lock on a named
|
|
* resource.
|
|
*
|
|
* lockspace: context for the request
|
|
* mode: the requested mode of the lock (DLM_LOCK_)
|
|
* lksb: lock status block for input and async return values
|
|
* flags: input flags (DLM_LKF_)
|
|
* name: name of the resource to lock, can be binary
|
|
* namelen: the length in bytes of the resource name (MAX_RESNAME_LEN)
|
|
* parent: the lock ID of a parent lock or 0 if none
|
|
* lockast: function DLM executes when it completes processing the request
|
|
* astarg: argument passed to lockast and bast functions
|
|
* bast: function DLM executes when this lock later blocks another request
|
|
*
|
|
* Returns:
|
|
* 0 if request is successfully queued for processing
|
|
* -EINVAL if any input parameters are invalid
|
|
* -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
|
|
* -ENOMEM if there is no memory to process request
|
|
* -ENOTCONN if there is a communication error
|
|
*
|
|
* If the call to dlm_lock returns an error then the operation has failed and
|
|
* the AST routine will not be called. If dlm_lock returns 0 it is still
|
|
* possible that the lock operation will fail. The AST routine will be called
|
|
* when the locking is complete and the status is returned in the lksb.
|
|
*
|
|
* If the AST routines or parameter are passed to a conversion operation then
|
|
* they will overwrite those values that were passed to a previous dlm_lock
|
|
* call.
|
|
*
|
|
* AST routines should not block (at least not for long), but may make
|
|
* any locking calls they please.
|
|
*/
|
|
|
|
int dlm_lock(dlm_lockspace_t *lockspace,
|
|
int mode,
|
|
struct dlm_lksb *lksb,
|
|
uint32_t flags,
|
|
void *name,
|
|
unsigned int namelen,
|
|
uint32_t parent_lkid,
|
|
void (*lockast) (void *astarg),
|
|
void *astarg,
|
|
void (*bast) (void *astarg, int mode));
|
|
|
|
/*
|
|
* dlm_unlock
|
|
*
|
|
* Asynchronously release a lock on a resource. The AST routine is called
|
|
* when the resource is successfully unlocked.
|
|
*
|
|
* lockspace: context for the request
|
|
* lkid: the lock ID as returned in the lksb
|
|
* flags: input flags (DLM_LKF_)
|
|
* lksb: if NULL the lksb parameter passed to last lock request is used
|
|
* astarg: the arg used with the completion ast for the unlock
|
|
*
|
|
* Returns:
|
|
* 0 if request is successfully queued for processing
|
|
* -EINVAL if any input parameters are invalid
|
|
* -ENOTEMPTY if the lock still has sublocks
|
|
* -EBUSY if the lock is waiting for a remote lock operation
|
|
* -ENOTCONN if there is a communication error
|
|
*/
|
|
|
|
int dlm_unlock(dlm_lockspace_t *lockspace,
|
|
uint32_t lkid,
|
|
uint32_t flags,
|
|
struct dlm_lksb *lksb,
|
|
void *astarg);
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* __DLM_DOT_H__ */
|
|
|