2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
linux-next/drivers/pinctrl/pinconf-generic.c
Linus Torvalds 43c95d3694 This is the bulk of pin control changes for the v5.3 kernel
cycle:
 
 Core changes:
 
 - Device links can optionally be added between a pin control
   producer and its consumers. This will affect how the system
   power management is handled: a pin controller will not suspend
   before all of its consumers have been suspended. This was
   necessary for the ST Microelectronics STMFX expander and
   need to be tested on other systems as well: it makes sense
   to make this default in the long run. Right now it is
   opt-in per driver.
 
 - Drive strength can be specified in microamps. With decreases
   in silicon technology, milliamps isn't granular enough, let's
   make it possible to select drive strengths in microamps. Right
   now the Meson (AMlogic) driver needs this.
 
 New drivers:
 
 - New subdriver for the Tegra 194 SoC.
 
 - New subdriver for the Qualcomm SDM845.
 
 - New subdriver for the Qualcomm SM8150.
 
 - New subdriver for the Freescale i.MX8MN (Freescale is now a
   product line of NXP).
 
 - New subdriver for Marvell MV98DX1135.
 
 Driver improvements:
 
 - The Bitmain BM1880 driver now supports pin config in
   addition to muxing.
 
 - The Qualcomm drivers can now reserve some GPIOs as taken
   aside and not usable for users. This is used in ACPI systems
   to take out some GPIO lines used by the BIOS so that
   noone else (neither kernel nor userspace) will play with them
   by mistake and crash the machine.
 
 - A slew of refurbishing around the Aspeed drivers (board
   management controllers for servers) in preparation for the
   new Aspeed AST2600 SoC.
 
 - A slew of improvements over the SH PFC drivers as usual.
 
 - Misc cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl0oTPcACgkQQRCzN7AZ
 XXNTsw//aNPfkJS8gRszv58G56lyuO8h6Cq4m5eDpzhlpjx5qjELgi9h2UNGINqD
 7CWxo35ufbKe0fDIcqpXmtuDMtSu6MuKT3SMepuw9uf9wxyndK4RIuyb0lpAJrx2
 +NMPxzS+ARlrMmcfvXPRyPWHqAkXsQk6zcCgiuNCPtROkOZgs1YZ3+pemZw2/FMq
 gSLTO/95p0TPWr6YAlpByqfsA1A/onEm9HOiU2INV7DrAfUj7mnkuC1nZ4IJDFcv
 Gn6qQVQPah+MBzkwt4WXy5kDRozCIbg7x+FQBw3KAO23TrLDTFuNsYIWGFcP2CN2
 eT8iSP3cWrXNUuEgcPD59aO07rhFooT+QBQFt2ih1dJCV1u/795wb57nxSh1YDcO
 M2tG+AW2EZky65FXwhLW2rq3LvmTM4kiEz3mA/DrcOAKvvQllK+6FKEhNy0StstP
 yvvlqoXdgH3sfOnWTAyHr35qA/pMuGEXSryWTJPqpflCvZ3wxNk+IV5nyPAtfaFz
 CK7U0Ya7NaEp/5ZlpE720apJ4uSqmRrLwk5Y1eKQvT46mGOk3rC9ZPIMXc8mB10/
 mJ9mTubi1t4uIPnBl/T1T7f8QhNtr9hOY6wjLf1LoMeJ1XVNBqA+2uydOlBJ1iop
 RQ7y/Jl1SZ/gBzKCmvjPHT2+0Oui9oXGd9bQi0xQKO5Lus/nAIg=
 =Wdw1
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.3 kernel cycle:

  Core changes:

   - Device links can optionally be added between a pin control producer
     and its consumers. This will affect how the system power management
     is handled: a pin controller will not suspend before all of its
     consumers have been suspended.

     This was necessary for the ST Microelectronics STMFX expander and
     need to be tested on other systems as well: it makes sense to make
     this default in the long run.

     Right now it is opt-in per driver.

   - Drive strength can be specified in microamps. With decreases in
     silicon technology, milliamps isn't granular enough, let's make it
     possible to select drive strengths in microamps.

     Right now the Meson (AMlogic) driver needs this.

  New drivers:

   - New subdriver for the Tegra 194 SoC.

   - New subdriver for the Qualcomm SDM845.

   - New subdriver for the Qualcomm SM8150.

   - New subdriver for the Freescale i.MX8MN (Freescale is now a product
     line of NXP).

   - New subdriver for Marvell MV98DX1135.

  Driver improvements:

   - The Bitmain BM1880 driver now supports pin config in addition to
     muxing.

   - The Qualcomm drivers can now reserve some GPIOs as taken aside and
     not usable for users. This is used in ACPI systems to take out some
     GPIO lines used by the BIOS so that noone else (neither kernel nor
     userspace) will play with them by mistake and crash the machine.

   - A slew of refurbishing around the Aspeed drivers (board management
     controllers for servers) in preparation for the new Aspeed AST2600
     SoC.

   - A slew of improvements over the SH PFC drivers as usual.

   - Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
  pinctrl: aspeed: Strip moved macros and structs from private header
  pinctrl: aspeed: Fix missed include
  pinctrl: baytrail: Use GENMASK() consistently
  pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
  pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
  pinctrl: qcom: Add SM8150 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
  dt-bindings: pinctrl: qcom: Document missing gpio nodes
  pinctrl: aspeed: Add implementation-related documentation
  pinctrl: aspeed: Split out pinmux from general pinctrl
  pinctrl: aspeed: Clarify comment about strapping W1C
  pinctrl: aspeed: Correct comment that is no longer true
  MAINTAINERS: Add entry for ASPEED pinctrl drivers
  dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Split bindings document in two
  pinctrl: qcom: Add irq_enable callback for msm gpio
  pinctrl: madera: Fixup SPDX headers
  pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
  pinctrl: tegra: Add bitmask support for parked bits
  ...
2019-07-13 15:02:27 -07:00

414 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Core driver for the generic pin config portions of the pin control subsystem
*
* Copyright (C) 2011 ST-Ericsson SA
* Written on behalf of Linaro for ST-Ericsson
*
* Author: Linus Walleij <linus.walleij@linaro.org>
*/
#define pr_fmt(fmt) "generic pinconfig core: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/of.h>
#include "core.h"
#include "pinconf.h"
#include "pinctrl-utils.h"
#ifdef CONFIG_DEBUG_FS
static const struct pin_config_item conf_items[] = {
PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
"input bias pull to pin specific state", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength", "mA", true),
PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH_UA, "output drive strength", "uA", true),
PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "usec", true),
PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled", NULL, false),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL, false),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL, false),
PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true),
PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false),
PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
PCONFDUMP(PIN_CONFIG_SKEW_DELAY, "skew delay", NULL, true),
};
static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
struct seq_file *s, const char *gname,
unsigned pin,
const struct pin_config_item *items,
int nitems, int *print_sep)
{
int i;
for (i = 0; i < nitems; i++) {
unsigned long config;
int ret;
/* We want to check out this parameter */
config = pinconf_to_config_packed(items[i].param, 0);
if (gname)
ret = pin_config_group_get(dev_name(pctldev->dev),
gname, &config);
else
ret = pin_config_get_for_pin(pctldev, pin, &config);
/* These are legal errors */
if (ret == -EINVAL || ret == -ENOTSUPP)
continue;
if (ret) {
seq_printf(s, "ERROR READING CONFIG SETTING %d ", i);
continue;
}
/* comma between multiple configs */
if (*print_sep)
seq_puts(s, ", ");
*print_sep = 1;
seq_puts(s, items[i].display);
/* Print unit if available */
if (items[i].has_arg) {
seq_printf(s, " (%u",
pinconf_to_config_argument(config));
if (items[i].format)
seq_printf(s, " %s)", items[i].format);
else
seq_puts(s, ")");
}
}
}
/**
* pinconf_generic_dump_pins - Print information about pin or group of pins
* @pctldev: Pincontrol device
* @s: File to print to
* @gname: Group name specifying pins
* @pin: Pin number specyfying pin
*
* Print the pinconf configuration for the requested pin(s) to @s. Pins can be
* specified either by pin using @pin or by group using @gname. Only one needs
* to be specified the other can be NULL/0.
*/
void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s,
const char *gname, unsigned pin)
{
const struct pinconf_ops *ops = pctldev->desc->confops;
int print_sep = 0;
if (!ops->is_generic)
return;
/* generic parameters */
pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items,
ARRAY_SIZE(conf_items), &print_sep);
/* driver-specific parameters */
if (pctldev->desc->num_custom_params &&
pctldev->desc->custom_conf_items)
pinconf_generic_dump_one(pctldev, s, gname, pin,
pctldev->desc->custom_conf_items,
pctldev->desc->num_custom_params,
&print_sep);
}
void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned long config)
{
int i;
for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
if (pinconf_to_config_param(config) != conf_items[i].param)
continue;
seq_printf(s, "%s: 0x%x", conf_items[i].display,
pinconf_to_config_argument(config));
}
if (!pctldev->desc->num_custom_params ||
!pctldev->desc->custom_conf_items)
return;
for (i = 0; i < pctldev->desc->num_custom_params; i++) {
if (pinconf_to_config_param(config) !=
pctldev->desc->custom_conf_items[i].param)
continue;
seq_printf(s, "%s: 0x%x",
pctldev->desc->custom_conf_items[i].display,
pinconf_to_config_argument(config));
}
}
EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
#endif
#ifdef CONFIG_OF
static const struct pinconf_generic_params dt_params[] = {
{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
{ "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
{ "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 },
{ "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 },
{ "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 },
{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
{ "drive-strength-microamp", PIN_CONFIG_DRIVE_STRENGTH_UA, 0 },
{ "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 },
{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
{ "input-schmitt", PIN_CONFIG_INPUT_SCHMITT, 0 },
{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
{ "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 },
{ "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 },
{ "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 },
{ "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
{ "output-high", PIN_CONFIG_OUTPUT, 1, },
{ "output-low", PIN_CONFIG_OUTPUT, 0, },
{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
{ "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
{ "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
{ "skew-delay", PIN_CONFIG_SKEW_DELAY, 0 },
};
/**
* parse_dt_cfg() - Parse DT pinconf parameters
* @np: DT node
* @params: Array of describing generic parameters
* @count: Number of entries in @params
* @cfg: Array of parsed config options
* @ncfg: Number of entries in @cfg
*
* Parse the config options described in @params from @np and puts the result
* in @cfg. @cfg does not need to be empty, entries are added beginning at
* @ncfg. @ncfg is updated to reflect the number of entries after parsing. @cfg
* needs to have enough memory allocated to hold all possible entries.
*/
static void parse_dt_cfg(struct device_node *np,
const struct pinconf_generic_params *params,
unsigned int count, unsigned long *cfg,
unsigned int *ncfg)
{
int i;
for (i = 0; i < count; i++) {
u32 val;
int ret;
const struct pinconf_generic_params *par = &params[i];
ret = of_property_read_u32(np, par->property, &val);
/* property not found */
if (ret == -EINVAL)
continue;
/* use default value, when no value is specified */
if (ret)
val = par->default_value;
pr_debug("found %s with value %u\n", par->property, val);
cfg[*ncfg] = pinconf_to_config_packed(par->param, val);
(*ncfg)++;
}
}
/**
* pinconf_generic_parse_dt_config()
* parse the config properties into generic pinconfig values.
* @np: node containing the pinconfig properties
* @configs: array with nconfigs entries containing the generic pinconf values
* must be freed when no longer necessary.
* @nconfigs: umber of configurations
*/
int pinconf_generic_parse_dt_config(struct device_node *np,
struct pinctrl_dev *pctldev,
unsigned long **configs,
unsigned int *nconfigs)
{
unsigned long *cfg;
unsigned int max_cfg, ncfg = 0;
int ret;
if (!np)
return -EINVAL;
/* allocate a temporary array big enough to hold one of each option */
max_cfg = ARRAY_SIZE(dt_params);
if (pctldev)
max_cfg += pctldev->desc->num_custom_params;
cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL);
if (!cfg)
return -ENOMEM;
parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg);
if (pctldev && pctldev->desc->num_custom_params &&
pctldev->desc->custom_params)
parse_dt_cfg(np, pctldev->desc->custom_params,
pctldev->desc->num_custom_params, cfg, &ncfg);
ret = 0;
/* no configs found at all */
if (ncfg == 0) {
*configs = NULL;
*nconfigs = 0;
goto out;
}
/*
* Now limit the number of configs to the real number of
* found properties.
*/
*configs = kmemdup(cfg, ncfg * sizeof(unsigned long), GFP_KERNEL);
if (!*configs) {
ret = -ENOMEM;
goto out;
}
*nconfigs = ncfg;
out:
kfree(cfg);
return ret;
}
int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
struct device_node *np, struct pinctrl_map **map,
unsigned *reserved_maps, unsigned *num_maps,
enum pinctrl_map_type type)
{
int ret;
const char *function;
struct device *dev = pctldev->dev;
unsigned long *configs = NULL;
unsigned num_configs = 0;
unsigned reserve, strings_count;
struct property *prop;
const char *group;
const char *subnode_target_type = "pins";
ret = of_property_count_strings(np, "pins");
if (ret < 0) {
ret = of_property_count_strings(np, "groups");
if (ret < 0)
/* skip this node; may contain config child nodes */
return 0;
if (type == PIN_MAP_TYPE_INVALID)
type = PIN_MAP_TYPE_CONFIGS_GROUP;
subnode_target_type = "groups";
} else {
if (type == PIN_MAP_TYPE_INVALID)
type = PIN_MAP_TYPE_CONFIGS_PIN;
}
strings_count = ret;
ret = of_property_read_string(np, "function", &function);
if (ret < 0) {
/* EINVAL=missing, which is fine since it's optional */
if (ret != -EINVAL)
dev_err(dev, "%pOF: could not parse property function\n",
np);
function = NULL;
}
ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
&num_configs);
if (ret < 0) {
dev_err(dev, "%pOF: could not parse node property\n", np);
return ret;
}
reserve = 0;
if (function != NULL)
reserve++;
if (num_configs)
reserve++;
reserve *= strings_count;
ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps,
num_maps, reserve);
if (ret < 0)
goto exit;
of_property_for_each_string(np, subnode_target_type, prop, group) {
if (function) {
ret = pinctrl_utils_add_map_mux(pctldev, map,
reserved_maps, num_maps, group,
function);
if (ret < 0)
goto exit;
}
if (num_configs) {
ret = pinctrl_utils_add_map_configs(pctldev, map,
reserved_maps, num_maps, group, configs,
num_configs, type);
if (ret < 0)
goto exit;
}
}
ret = 0;
exit:
kfree(configs);
return ret;
}
EXPORT_SYMBOL_GPL(pinconf_generic_dt_subnode_to_map);
int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config, struct pinctrl_map **map,
unsigned *num_maps, enum pinctrl_map_type type)
{
unsigned reserved_maps;
struct device_node *np;
int ret;
reserved_maps = 0;
*map = NULL;
*num_maps = 0;
ret = pinconf_generic_dt_subnode_to_map(pctldev, np_config, map,
&reserved_maps, num_maps, type);
if (ret < 0)
goto exit;
for_each_available_child_of_node(np_config, np) {
ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
&reserved_maps, num_maps, type);
if (ret < 0)
goto exit;
}
return 0;
exit:
pinctrl_utils_free_map(pctldev, *map, *num_maps);
return ret;
}
EXPORT_SYMBOL_GPL(pinconf_generic_dt_node_to_map);
void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map,
unsigned num_maps)
{
pinctrl_utils_free_map(pctldev, map, num_maps);
}
EXPORT_SYMBOL_GPL(pinconf_generic_dt_free_map);
#endif