mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 06:04:14 +08:00
56fece2008
This driver has had it's own different infrastructure for doing this for ages, but it's time it used the common one. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
406 lines
10 KiB
C
406 lines
10 KiB
C
/* -*- mode: c; c-basic-offset: 8 -*- */
|
|
|
|
/* NCR Dual 700 MCA SCSI Driver
|
|
*
|
|
* Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
|
|
**-----------------------------------------------------------------------------
|
|
**
|
|
** This program is free software; you can redistribute it and/or modify
|
|
** it under the terms of the GNU General Public License as published by
|
|
** the Free Software Foundation; either version 2 of the License, or
|
|
** (at your option) any later version.
|
|
**
|
|
** This program is distributed in the hope that it will be useful,
|
|
** but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
** GNU General Public License for more details.
|
|
**
|
|
** You should have received a copy of the GNU General Public License
|
|
** along with this program; if not, write to the Free Software
|
|
** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
**
|
|
**-----------------------------------------------------------------------------
|
|
*/
|
|
|
|
/* Notes:
|
|
*
|
|
* Most of the work is done in the chip specific module, 53c700.o
|
|
*
|
|
* TODO List:
|
|
*
|
|
* 1. Extract the SCSI ID from the voyager CMOS table (necessary to
|
|
* support multi-host environments.
|
|
*
|
|
* */
|
|
|
|
|
|
/* CHANGELOG
|
|
*
|
|
* Version 2.2
|
|
*
|
|
* Added mca_set_adapter_name().
|
|
*
|
|
* Version 2.1
|
|
*
|
|
* Modularise the driver into a Board piece (this file) and a chip
|
|
* piece 53c700.[ch] and 53c700.scr, added module options. You can
|
|
* now specify the scsi id by the parameters
|
|
*
|
|
* NCR_D700=slot:<n> [siop:<n>] id:<n> ....
|
|
*
|
|
* They need to be comma separated if compiled into the kernel
|
|
*
|
|
* Version 2.0
|
|
*
|
|
* Initial implementation of TCQ (Tag Command Queueing). TCQ is full
|
|
* featured and uses the clock algorithm to keep track of outstanding
|
|
* tags and guard against individual tag starvation. Also fixed a bug
|
|
* in all of the 1.x versions where the D700_data_residue() function
|
|
* was returning results off by 32 bytes (and thus causing the same 32
|
|
* bytes to be written twice corrupting the data block). It turns out
|
|
* the 53c700 only has a 6 bit DBC and DFIFO registers not 7 bit ones
|
|
* like the 53c710 (The 710 is the only data manual still available,
|
|
* which I'd been using to program the 700).
|
|
*
|
|
* Version 1.2
|
|
*
|
|
* Much improved message handling engine
|
|
*
|
|
* Version 1.1
|
|
*
|
|
* Add code to handle selection reasonably correctly. By the time we
|
|
* get the selection interrupt, we've already responded, but drop off the
|
|
* bus and hope the selector will go away.
|
|
*
|
|
* Version 1.0:
|
|
*
|
|
* Initial release. Fully functional except for procfs and tag
|
|
* command queueing. Has only been tested on cards with 53c700-66
|
|
* chips and only single ended. Features are
|
|
*
|
|
* 1. Synchronous data transfers to offset 8 (limit of 700-66) and
|
|
* 100ns (10MHz) limit of SCSI-2
|
|
*
|
|
* 2. Disconnection and reselection
|
|
*
|
|
* Testing:
|
|
*
|
|
* I've only really tested this with the 700-66 chip, but have done
|
|
* soak tests in multi-device environments to verify that
|
|
* disconnections and reselections are being processed correctly.
|
|
* */
|
|
|
|
#define NCR_D700_VERSION "2.2"
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mca.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/io.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_transport.h>
|
|
#include <scsi/scsi_transport_spi.h>
|
|
|
|
#include "53c700.h"
|
|
#include "NCR_D700.h"
|
|
|
|
static char *NCR_D700; /* command line from insmod */
|
|
|
|
MODULE_AUTHOR("James Bottomley");
|
|
MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
|
|
MODULE_LICENSE("GPL");
|
|
module_param(NCR_D700, charp, 0);
|
|
|
|
static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
|
|
{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };
|
|
|
|
#ifdef MODULE
|
|
#define ARG_SEP ' '
|
|
#else
|
|
#define ARG_SEP ','
|
|
#endif
|
|
|
|
static int __init
|
|
param_setup(char *string)
|
|
{
|
|
char *pos = string, *next;
|
|
int slot = -1, siop = -1;
|
|
|
|
while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
|
|
int val = (int)simple_strtoul(++next, NULL, 0);
|
|
|
|
if(!strncmp(pos, "slot:", 5))
|
|
slot = val;
|
|
else if(!strncmp(pos, "siop:", 5))
|
|
siop = val;
|
|
else if(!strncmp(pos, "id:", 3)) {
|
|
if(slot == -1) {
|
|
printk(KERN_WARNING "NCR D700: Must specify slot for id parameter\n");
|
|
} else if(slot > MCA_MAX_SLOT_NR) {
|
|
printk(KERN_WARNING "NCR D700: Illegal slot %d for id %d\n", slot, val);
|
|
} else {
|
|
if(siop != 0 && siop != 1) {
|
|
id_array[slot*2] = val;
|
|
id_array[slot*2 + 1] =val;
|
|
} else {
|
|
id_array[slot*2 + siop] = val;
|
|
}
|
|
}
|
|
}
|
|
if((pos = strchr(pos, ARG_SEP)) != NULL)
|
|
pos++;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* Host template. The 53c700 routine NCR_700_detect will
|
|
* fill in all of the missing routines */
|
|
static struct scsi_host_template NCR_D700_driver_template = {
|
|
.module = THIS_MODULE,
|
|
.name = "NCR Dual 700 MCA",
|
|
.proc_name = "NCR_D700",
|
|
.this_id = 7,
|
|
};
|
|
|
|
/* We needs this helper because we have two hosts per struct device */
|
|
struct NCR_D700_private {
|
|
struct device *dev;
|
|
struct Scsi_Host *hosts[2];
|
|
char name[30];
|
|
char pad;
|
|
};
|
|
|
|
static int
|
|
NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
|
|
int slot, u32 region, int differential)
|
|
{
|
|
struct NCR_700_Host_Parameters *hostdata;
|
|
struct Scsi_Host *host;
|
|
int ret;
|
|
|
|
hostdata = kmalloc(sizeof(*hostdata), GFP_KERNEL);
|
|
if (!hostdata) {
|
|
printk(KERN_ERR "NCR D700: SIOP%d: Failed to allocate host"
|
|
"data, detatching\n", siop);
|
|
return -ENOMEM;
|
|
}
|
|
memset(hostdata, 0, sizeof(*hostdata));
|
|
|
|
if (!request_region(region, 64, "NCR_D700")) {
|
|
printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n",
|
|
region);
|
|
ret = -ENODEV;
|
|
goto region_failed;
|
|
}
|
|
|
|
/* Fill in the three required pieces of hostdata */
|
|
hostdata->base = ioport_map(region, 64);
|
|
hostdata->differential = (((1<<siop) & differential) != 0);
|
|
hostdata->clock = NCR_D700_CLOCK_MHZ;
|
|
|
|
/* and register the siop */
|
|
host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);
|
|
if (!host) {
|
|
ret = -ENOMEM;
|
|
goto detect_failed;
|
|
}
|
|
|
|
p->hosts[siop] = host;
|
|
/* FIXME: read this from SUS */
|
|
host->this_id = id_array[slot * 2 + siop];
|
|
host->irq = irq;
|
|
host->base = region;
|
|
scsi_scan_host(host);
|
|
|
|
return 0;
|
|
|
|
detect_failed:
|
|
release_region(host->base, 64);
|
|
region_failed:
|
|
kfree(hostdata);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
NCR_D700_intr(int irq, void *data, struct pt_regs *regs)
|
|
{
|
|
struct NCR_D700_private *p = (struct NCR_D700_private *)data;
|
|
int i, found = 0;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
if (p->hosts[i] &&
|
|
NCR_700_intr(irq, p->hosts[i], regs) == IRQ_HANDLED)
|
|
found++;
|
|
|
|
return found ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
/* Detect a D700 card. Note, because of the setup --- the chips are
|
|
* essentially connectecd to the MCA bus independently, it is easier
|
|
* to set them up as two separate host adapters, rather than one
|
|
* adapter with two channels */
|
|
static int
|
|
NCR_D700_probe(struct device *dev)
|
|
{
|
|
struct NCR_D700_private *p;
|
|
int differential;
|
|
static int banner = 1;
|
|
struct mca_device *mca_dev = to_mca_device(dev);
|
|
int slot = mca_dev->slot;
|
|
int found = 0;
|
|
int irq, i;
|
|
int pos3j, pos3k, pos3a, pos3b, pos4;
|
|
__u32 base_addr, offset_addr;
|
|
|
|
/* enable board interrupt */
|
|
pos4 = mca_device_read_pos(mca_dev, 4);
|
|
pos4 |= 0x4;
|
|
mca_device_write_pos(mca_dev, 4, pos4);
|
|
|
|
mca_device_write_pos(mca_dev, 6, 9);
|
|
pos3j = mca_device_read_pos(mca_dev, 3);
|
|
mca_device_write_pos(mca_dev, 6, 10);
|
|
pos3k = mca_device_read_pos(mca_dev, 3);
|
|
mca_device_write_pos(mca_dev, 6, 0);
|
|
pos3a = mca_device_read_pos(mca_dev, 3);
|
|
mca_device_write_pos(mca_dev, 6, 1);
|
|
pos3b = mca_device_read_pos(mca_dev, 3);
|
|
|
|
base_addr = ((pos3j << 8) | pos3k) & 0xfffffff0;
|
|
offset_addr = ((pos3a << 8) | pos3b) & 0xffffff70;
|
|
|
|
irq = (pos4 & 0x3) + 11;
|
|
if(irq >= 13)
|
|
irq++;
|
|
if(banner) {
|
|
printk(KERN_NOTICE "NCR D700: Driver Version " NCR_D700_VERSION "\n"
|
|
"NCR D700: Copyright (c) 2001 by James.Bottomley@HansenPartnership.com\n"
|
|
"NCR D700:\n");
|
|
banner = 0;
|
|
}
|
|
/* now do the bus related transforms */
|
|
irq = mca_device_transform_irq(mca_dev, irq);
|
|
base_addr = mca_device_transform_ioport(mca_dev, base_addr);
|
|
offset_addr = mca_device_transform_ioport(mca_dev, offset_addr);
|
|
|
|
printk(KERN_NOTICE "NCR D700: found in slot %d irq = %d I/O base = 0x%x\n", slot, irq, offset_addr);
|
|
|
|
/*outb(BOARD_RESET, base_addr);*/
|
|
|
|
/* clear any pending interrupts */
|
|
(void)inb(base_addr + 0x08);
|
|
/* get modctl, used later for setting diff bits */
|
|
switch(differential = (inb(base_addr + 0x08) >> 6)) {
|
|
case 0x00:
|
|
/* only SIOP1 differential */
|
|
differential = 0x02;
|
|
break;
|
|
case 0x01:
|
|
/* Both SIOPs differential */
|
|
differential = 0x03;
|
|
break;
|
|
case 0x03:
|
|
/* No SIOPs differential */
|
|
differential = 0x00;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "D700: UNEXPECTED DIFFERENTIAL RESULT 0x%02x\n",
|
|
differential);
|
|
differential = 0x00;
|
|
break;
|
|
}
|
|
|
|
p = kmalloc(sizeof(*p), GFP_KERNEL);
|
|
if (!p)
|
|
return -ENOMEM;
|
|
memset(p, '\0', sizeof(*p));
|
|
p->dev = dev;
|
|
snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id);
|
|
if (request_irq(irq, NCR_D700_intr, SA_SHIRQ, p->name, p)) {
|
|
printk(KERN_ERR "D700: request_irq failed\n");
|
|
kfree(p);
|
|
return -EBUSY;
|
|
}
|
|
/* plumb in both 700 chips */
|
|
for (i = 0; i < 2; i++) {
|
|
int err;
|
|
|
|
if ((err = NCR_D700_probe_one(p, i, slot, irq,
|
|
offset_addr + (0x80 * i),
|
|
differential)) != 0)
|
|
printk("D700: SIOP%d: probe failed, error = %d\n",
|
|
i, err);
|
|
else
|
|
found++;
|
|
}
|
|
|
|
if (!found) {
|
|
kfree(p);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mca_device_set_claim(mca_dev, 1);
|
|
mca_device_set_name(mca_dev, "NCR_D700");
|
|
dev_set_drvdata(dev, p);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
NCR_D700_remove_one(struct Scsi_Host *host)
|
|
{
|
|
scsi_remove_host(host);
|
|
NCR_700_release(host);
|
|
kfree((struct NCR_700_Host_Parameters *)host->hostdata[0]);
|
|
free_irq(host->irq, host);
|
|
release_region(host->base, 64);
|
|
}
|
|
|
|
static int
|
|
NCR_D700_remove(struct device *dev)
|
|
{
|
|
struct NCR_D700_private *p = dev_get_drvdata(dev);
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
NCR_D700_remove_one(p->hosts[i]);
|
|
|
|
kfree(p);
|
|
return 0;
|
|
}
|
|
|
|
static short NCR_D700_id_table[] = { NCR_D700_MCA_ID, 0 };
|
|
|
|
static struct mca_driver NCR_D700_driver = {
|
|
.id_table = NCR_D700_id_table,
|
|
.driver = {
|
|
.name = "NCR_D700",
|
|
.bus = &mca_bus_type,
|
|
.probe = NCR_D700_probe,
|
|
.remove = NCR_D700_remove,
|
|
},
|
|
};
|
|
|
|
static int __init NCR_D700_init(void)
|
|
{
|
|
#ifdef MODULE
|
|
if (NCR_D700)
|
|
param_setup(NCR_D700);
|
|
#endif
|
|
|
|
return mca_register_driver(&NCR_D700_driver);
|
|
}
|
|
|
|
static void __exit NCR_D700_exit(void)
|
|
{
|
|
mca_unregister_driver(&NCR_D700_driver);
|
|
}
|
|
|
|
module_init(NCR_D700_init);
|
|
module_exit(NCR_D700_exit);
|
|
|
|
__setup("NCR_D700=", param_setup);
|