mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 12:14:01 +08:00
c78275f366
The eTSEC includes a PTP clock with quite a few features. This patch adds support for the basic clock adjustment functions, plus two external time stamps, one alarm, and the PPS callback. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
131 lines
4.9 KiB
Plaintext
131 lines
4.9 KiB
Plaintext
* MDIO IO device
|
|
|
|
The MDIO is a bus to which the PHY devices are connected. For each
|
|
device that exists on this bus, a child node should be created. See
|
|
the definition of the PHY node in booting-without-of.txt for an example
|
|
of how to define a PHY.
|
|
|
|
Required properties:
|
|
- reg : Offset and length of the register set for the device
|
|
- compatible : Should define the compatible device type for the
|
|
mdio. Currently, this is most likely to be "fsl,gianfar-mdio"
|
|
|
|
Example:
|
|
|
|
mdio@24520 {
|
|
reg = <24520 20>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
|
|
ethernet-phy@0 {
|
|
......
|
|
};
|
|
};
|
|
|
|
* TBI Internal MDIO bus
|
|
|
|
As of this writing, every tsec is associated with an internal TBI PHY.
|
|
This PHY is accessed through the local MDIO bus. These buses are defined
|
|
similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi".
|
|
The TBI PHYs underneath them are similar to normal PHYs, but the reg property
|
|
is considered instructive, rather than descriptive. The reg property should
|
|
be chosen so it doesn't interfere with other PHYs on the bus.
|
|
|
|
* Gianfar-compatible ethernet nodes
|
|
|
|
Properties:
|
|
|
|
- device_type : Should be "network"
|
|
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
|
|
- compatible : Should be "gianfar"
|
|
- reg : Offset and length of the register set for the device
|
|
- local-mac-address : List of bytes representing the ethernet address of
|
|
this controller
|
|
- interrupts : For FEC devices, the first interrupt is the device's
|
|
interrupt. For TSEC and eTSEC devices, the first interrupt is
|
|
transmit, the second is receive, and the third is error.
|
|
- phy-handle : The phandle for the PHY connected to this ethernet
|
|
controller.
|
|
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
|
|
but unique to the all specified fixed-links, b is duplex - 0 half,
|
|
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
|
|
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
|
|
- phy-connection-type : a string naming the controller/PHY interface type,
|
|
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
|
|
"tbi", or "rtbi". This property is only really needed if the connection
|
|
is of type "rgmii-id", as all other connection types are detected by
|
|
hardware.
|
|
- fsl,magic-packet : If present, indicates that the hardware supports
|
|
waking up via magic packet.
|
|
- bd-stash : If present, indicates that the hardware supports stashing
|
|
buffer descriptors in the L2.
|
|
- rx-stash-len : Denotes the number of bytes of a received buffer to stash
|
|
in the L2.
|
|
- rx-stash-idx : Denotes the index of the first byte from the received
|
|
buffer to stash in the L2.
|
|
|
|
Example:
|
|
ethernet@24000 {
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
local-mac-address = [ 00 E0 0C 00 73 00 ];
|
|
interrupts = <29 2 30 2 34 2>;
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy0>
|
|
};
|
|
|
|
* Gianfar PTP clock nodes
|
|
|
|
General Properties:
|
|
|
|
- compatible Should be "fsl,etsec-ptp"
|
|
- reg Offset and length of the register set for the device
|
|
- interrupts There should be at least two interrupts. Some devices
|
|
have as many as four PTP related interrupts.
|
|
|
|
Clock Properties:
|
|
|
|
- fsl,tclk-period Timer reference clock period in nanoseconds.
|
|
- fsl,tmr-prsc Prescaler, divides the output clock.
|
|
- fsl,tmr-add Frequency compensation value.
|
|
- fsl,tmr-fiper1 Fixed interval period pulse generator.
|
|
- fsl,tmr-fiper2 Fixed interval period pulse generator.
|
|
- fsl,max-adj Maximum frequency adjustment in parts per billion.
|
|
|
|
These properties set the operational parameters for the PTP
|
|
clock. You must choose these carefully for the clock to work right.
|
|
Here is how to figure good values:
|
|
|
|
TimerOsc = system clock MHz
|
|
tclk_period = desired clock period nanoseconds
|
|
NominalFreq = 1000 / tclk_period MHz
|
|
FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
|
|
tmr_add = ceil(2^32 / FreqDivRatio)
|
|
OutputClock = NominalFreq / tmr_prsc MHz
|
|
PulseWidth = 1 / OutputClock microseconds
|
|
FiperFreq1 = desired frequency in Hz
|
|
FiperDiv1 = 1000000 * OutputClock / FiperFreq1
|
|
tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
|
|
max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
|
|
|
|
The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
|
|
driver expects that tmr_fiper1 will be correctly set to produce a 1
|
|
Pulse Per Second (PPS) signal, since this will be offered to the PPS
|
|
subsystem to synchronize the Linux clock.
|
|
|
|
Example:
|
|
|
|
ptp_clock@24E00 {
|
|
compatible = "fsl,etsec-ptp";
|
|
reg = <0x24E00 0xB0>;
|
|
interrupts = <12 0x8 13 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl,tclk-period = <10>;
|
|
fsl,tmr-prsc = <100>;
|
|
fsl,tmr-add = <0x999999A4>;
|
|
fsl,tmr-fiper1 = <0x3B9AC9F6>;
|
|
fsl,tmr-fiper2 = <0x00018696>;
|
|
fsl,max-adj = <659999998>;
|
|
};
|