mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
dbfe8ca259
Implements basic pinmux for the Nomadik pin controller. The plan is to split the existing singular pin config interface nmk_config_pin(), nmk_config_pins(), that will configure muxing and other settings at the same time, into two interfaces by splitting the code in pinmux and pinctrl and eventually deleting the old interface and its helper functions when all users are gone. nmk_gpio_set_mode() and nmk_gpio_get_mode() are two older interfaces for just configuring muxing/altfunctions that will also be replaced in the end. We take some extra care to handle the glitch-avoidance here, but it is simpler now since there is only one altsetting per pingroup so we know immediately if we need to avoid altfunc C glitches for a certain group. As part of the makeover implement the .request() and .free() calls on the GPIO chips and have them call back into the pinctrl layer to reserve GPIOs. ChangeLog v1->v2: - Rebased on pinctrl-mergebase-20120418 so we get the latest driver infrastructure where function count is done by a fixed value and we can drop a few range checks since this is now handled by the core. - Include a GPIO muxing hunk erroneously part of the pin config patch. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
858 lines
36 KiB
C
858 lines
36 KiB
C
#include <linux/kernel.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include "pinctrl-nomadik.h"
|
|
|
|
/* All the pins that can be used for GPIO and some other functions */
|
|
#define _GPIO(offset) (offset)
|
|
|
|
#define DB8500_PIN_AJ5 _GPIO(0)
|
|
#define DB8500_PIN_AJ3 _GPIO(1)
|
|
#define DB8500_PIN_AH4 _GPIO(2)
|
|
#define DB8500_PIN_AH3 _GPIO(3)
|
|
#define DB8500_PIN_AH6 _GPIO(4)
|
|
#define DB8500_PIN_AG6 _GPIO(5)
|
|
#define DB8500_PIN_AF6 _GPIO(6)
|
|
#define DB8500_PIN_AG5 _GPIO(7)
|
|
#define DB8500_PIN_AD5 _GPIO(8)
|
|
#define DB8500_PIN_AE4 _GPIO(9)
|
|
#define DB8500_PIN_AF5 _GPIO(10)
|
|
#define DB8500_PIN_AG4 _GPIO(11)
|
|
#define DB8500_PIN_AC4 _GPIO(12)
|
|
#define DB8500_PIN_AF3 _GPIO(13)
|
|
#define DB8500_PIN_AE3 _GPIO(14)
|
|
#define DB8500_PIN_AC3 _GPIO(15)
|
|
#define DB8500_PIN_AD3 _GPIO(16)
|
|
#define DB8500_PIN_AD4 _GPIO(17)
|
|
#define DB8500_PIN_AC2 _GPIO(18)
|
|
#define DB8500_PIN_AC1 _GPIO(19)
|
|
#define DB8500_PIN_AB4 _GPIO(20)
|
|
#define DB8500_PIN_AB3 _GPIO(21)
|
|
#define DB8500_PIN_AA3 _GPIO(22)
|
|
#define DB8500_PIN_AA4 _GPIO(23)
|
|
#define DB8500_PIN_AB2 _GPIO(24)
|
|
#define DB8500_PIN_Y4 _GPIO(25)
|
|
#define DB8500_PIN_Y2 _GPIO(26)
|
|
#define DB8500_PIN_AA2 _GPIO(27)
|
|
#define DB8500_PIN_AA1 _GPIO(28)
|
|
#define DB8500_PIN_W2 _GPIO(29)
|
|
#define DB8500_PIN_W3 _GPIO(30)
|
|
#define DB8500_PIN_V3 _GPIO(31)
|
|
#define DB8500_PIN_V2 _GPIO(32)
|
|
#define DB8500_PIN_AF2 _GPIO(33)
|
|
#define DB8500_PIN_AE1 _GPIO(34)
|
|
#define DB8500_PIN_AE2 _GPIO(35)
|
|
#define DB8500_PIN_AG2 _GPIO(36)
|
|
/* Hole */
|
|
#define DB8500_PIN_F3 _GPIO(64)
|
|
#define DB8500_PIN_F1 _GPIO(65)
|
|
#define DB8500_PIN_G3 _GPIO(66)
|
|
#define DB8500_PIN_G2 _GPIO(67)
|
|
#define DB8500_PIN_E1 _GPIO(68)
|
|
#define DB8500_PIN_E2 _GPIO(69)
|
|
#define DB8500_PIN_G5 _GPIO(70)
|
|
#define DB8500_PIN_G4 _GPIO(71)
|
|
#define DB8500_PIN_H4 _GPIO(72)
|
|
#define DB8500_PIN_H3 _GPIO(73)
|
|
#define DB8500_PIN_J3 _GPIO(74)
|
|
#define DB8500_PIN_H2 _GPIO(75)
|
|
#define DB8500_PIN_J2 _GPIO(76)
|
|
#define DB8500_PIN_H1 _GPIO(77)
|
|
#define DB8500_PIN_F4 _GPIO(78)
|
|
#define DB8500_PIN_E3 _GPIO(79)
|
|
#define DB8500_PIN_E4 _GPIO(80)
|
|
#define DB8500_PIN_D2 _GPIO(81)
|
|
#define DB8500_PIN_C1 _GPIO(82)
|
|
#define DB8500_PIN_D3 _GPIO(83)
|
|
#define DB8500_PIN_C2 _GPIO(84)
|
|
#define DB8500_PIN_D5 _GPIO(85)
|
|
#define DB8500_PIN_C6 _GPIO(86)
|
|
#define DB8500_PIN_B3 _GPIO(87)
|
|
#define DB8500_PIN_C4 _GPIO(88)
|
|
#define DB8500_PIN_E6 _GPIO(89)
|
|
#define DB8500_PIN_A3 _GPIO(90)
|
|
#define DB8500_PIN_B6 _GPIO(91)
|
|
#define DB8500_PIN_D6 _GPIO(92)
|
|
#define DB8500_PIN_B7 _GPIO(93)
|
|
#define DB8500_PIN_D7 _GPIO(94)
|
|
#define DB8500_PIN_E8 _GPIO(95)
|
|
#define DB8500_PIN_D8 _GPIO(96)
|
|
#define DB8500_PIN_D9 _GPIO(97)
|
|
/* Hole */
|
|
#define DB8500_PIN_A5 _GPIO(128)
|
|
#define DB8500_PIN_B4 _GPIO(129)
|
|
#define DB8500_PIN_C8 _GPIO(130)
|
|
#define DB8500_PIN_A12 _GPIO(131)
|
|
#define DB8500_PIN_C10 _GPIO(132)
|
|
#define DB8500_PIN_B10 _GPIO(133)
|
|
#define DB8500_PIN_B9 _GPIO(134)
|
|
#define DB8500_PIN_A9 _GPIO(135)
|
|
#define DB8500_PIN_C7 _GPIO(136)
|
|
#define DB8500_PIN_A7 _GPIO(137)
|
|
#define DB8500_PIN_C5 _GPIO(138)
|
|
#define DB8500_PIN_C9 _GPIO(139)
|
|
#define DB8500_PIN_B11 _GPIO(140)
|
|
#define DB8500_PIN_C12 _GPIO(141)
|
|
#define DB8500_PIN_C11 _GPIO(142)
|
|
#define DB8500_PIN_D12 _GPIO(143)
|
|
#define DB8500_PIN_B13 _GPIO(144)
|
|
#define DB8500_PIN_C13 _GPIO(145)
|
|
#define DB8500_PIN_D13 _GPIO(146)
|
|
#define DB8500_PIN_C15 _GPIO(147)
|
|
#define DB8500_PIN_B16 _GPIO(148)
|
|
#define DB8500_PIN_B14 _GPIO(149)
|
|
#define DB8500_PIN_C14 _GPIO(150)
|
|
#define DB8500_PIN_D17 _GPIO(151)
|
|
#define DB8500_PIN_D16 _GPIO(152)
|
|
#define DB8500_PIN_B17 _GPIO(153)
|
|
#define DB8500_PIN_C16 _GPIO(154)
|
|
#define DB8500_PIN_C19 _GPIO(155)
|
|
#define DB8500_PIN_C17 _GPIO(156)
|
|
#define DB8500_PIN_A18 _GPIO(157)
|
|
#define DB8500_PIN_C18 _GPIO(158)
|
|
#define DB8500_PIN_B19 _GPIO(159)
|
|
#define DB8500_PIN_B20 _GPIO(160)
|
|
#define DB8500_PIN_D21 _GPIO(161)
|
|
#define DB8500_PIN_D20 _GPIO(162)
|
|
#define DB8500_PIN_C20 _GPIO(163)
|
|
#define DB8500_PIN_B21 _GPIO(164)
|
|
#define DB8500_PIN_C21 _GPIO(165)
|
|
#define DB8500_PIN_A22 _GPIO(166)
|
|
#define DB8500_PIN_B24 _GPIO(167)
|
|
#define DB8500_PIN_C22 _GPIO(168)
|
|
#define DB8500_PIN_D22 _GPIO(169)
|
|
#define DB8500_PIN_C23 _GPIO(170)
|
|
#define DB8500_PIN_D23 _GPIO(171)
|
|
/* Hole */
|
|
#define DB8500_PIN_AJ27 _GPIO(192)
|
|
#define DB8500_PIN_AH27 _GPIO(193)
|
|
#define DB8500_PIN_AF27 _GPIO(194)
|
|
#define DB8500_PIN_AG28 _GPIO(195)
|
|
#define DB8500_PIN_AG26 _GPIO(196)
|
|
#define DB8500_PIN_AH24 _GPIO(197)
|
|
#define DB8500_PIN_AG25 _GPIO(198)
|
|
#define DB8500_PIN_AH23 _GPIO(199)
|
|
#define DB8500_PIN_AH26 _GPIO(200)
|
|
#define DB8500_PIN_AF24 _GPIO(201)
|
|
#define DB8500_PIN_AF25 _GPIO(202)
|
|
#define DB8500_PIN_AE23 _GPIO(203)
|
|
#define DB8500_PIN_AF23 _GPIO(204)
|
|
#define DB8500_PIN_AG23 _GPIO(205)
|
|
#define DB8500_PIN_AG24 _GPIO(206)
|
|
#define DB8500_PIN_AJ23 _GPIO(207)
|
|
#define DB8500_PIN_AH16 _GPIO(208)
|
|
#define DB8500_PIN_AG15 _GPIO(209)
|
|
#define DB8500_PIN_AJ15 _GPIO(210)
|
|
#define DB8500_PIN_AG14 _GPIO(211)
|
|
#define DB8500_PIN_AF13 _GPIO(212)
|
|
#define DB8500_PIN_AG13 _GPIO(213)
|
|
#define DB8500_PIN_AH15 _GPIO(214)
|
|
#define DB8500_PIN_AH13 _GPIO(215)
|
|
#define DB8500_PIN_AG12 _GPIO(216)
|
|
#define DB8500_PIN_AH12 _GPIO(217)
|
|
#define DB8500_PIN_AH11 _GPIO(218)
|
|
#define DB8500_PIN_AG10 _GPIO(219)
|
|
#define DB8500_PIN_AH10 _GPIO(220)
|
|
#define DB8500_PIN_AJ11 _GPIO(221)
|
|
#define DB8500_PIN_AJ9 _GPIO(222)
|
|
#define DB8500_PIN_AH9 _GPIO(223)
|
|
#define DB8500_PIN_AG9 _GPIO(224)
|
|
#define DB8500_PIN_AG8 _GPIO(225)
|
|
#define DB8500_PIN_AF8 _GPIO(226)
|
|
#define DB8500_PIN_AH7 _GPIO(227)
|
|
#define DB8500_PIN_AJ6 _GPIO(228)
|
|
#define DB8500_PIN_AG7 _GPIO(229)
|
|
#define DB8500_PIN_AF7 _GPIO(230)
|
|
/* Hole */
|
|
#define DB8500_PIN_AF28 _GPIO(256)
|
|
#define DB8500_PIN_AE29 _GPIO(257)
|
|
#define DB8500_PIN_AD29 _GPIO(258)
|
|
#define DB8500_PIN_AC29 _GPIO(259)
|
|
#define DB8500_PIN_AD28 _GPIO(260)
|
|
#define DB8500_PIN_AD26 _GPIO(261)
|
|
#define DB8500_PIN_AE26 _GPIO(262)
|
|
#define DB8500_PIN_AG29 _GPIO(263)
|
|
#define DB8500_PIN_AE27 _GPIO(264)
|
|
#define DB8500_PIN_AD27 _GPIO(265)
|
|
#define DB8500_PIN_AC28 _GPIO(266)
|
|
#define DB8500_PIN_AC27 _GPIO(267)
|
|
|
|
/*
|
|
* The names of the pins are denoted by GPIO number and ball name, even
|
|
* though they can be used for other things than GPIO, this is the first
|
|
* column in the table of the data sheet and often used on schematics and
|
|
* such.
|
|
*/
|
|
static const struct pinctrl_pin_desc nmk_db8500_pins[] = {
|
|
PINCTRL_PIN(DB8500_PIN_AJ5, "GPIO0_AJ5"),
|
|
PINCTRL_PIN(DB8500_PIN_AJ3, "GPIO1_AJ3"),
|
|
PINCTRL_PIN(DB8500_PIN_AH4, "GPIO2_AH4"),
|
|
PINCTRL_PIN(DB8500_PIN_AH3, "GPIO3_AH3"),
|
|
PINCTRL_PIN(DB8500_PIN_AH6, "GPIO4_AH6"),
|
|
PINCTRL_PIN(DB8500_PIN_AG6, "GPIO5_AG6"),
|
|
PINCTRL_PIN(DB8500_PIN_AF6, "GPIO6_AF6"),
|
|
PINCTRL_PIN(DB8500_PIN_AG5, "GPIO7_AG5"),
|
|
PINCTRL_PIN(DB8500_PIN_AD5, "GPIO8_AD5"),
|
|
PINCTRL_PIN(DB8500_PIN_AE4, "GPIO9_AE4"),
|
|
PINCTRL_PIN(DB8500_PIN_AF5, "GPIO10_AF5"),
|
|
PINCTRL_PIN(DB8500_PIN_AG4, "GPIO11_AG4"),
|
|
PINCTRL_PIN(DB8500_PIN_AC4, "GPIO12_AC4"),
|
|
PINCTRL_PIN(DB8500_PIN_AF3, "GPIO13_AF3"),
|
|
PINCTRL_PIN(DB8500_PIN_AE3, "GPIO14_AE3"),
|
|
PINCTRL_PIN(DB8500_PIN_AC3, "GPIO15_AC3"),
|
|
PINCTRL_PIN(DB8500_PIN_AD3, "GPIO16_AD3"),
|
|
PINCTRL_PIN(DB8500_PIN_AD4, "GPIO17_AD4"),
|
|
PINCTRL_PIN(DB8500_PIN_AC2, "GPIO18_AC2"),
|
|
PINCTRL_PIN(DB8500_PIN_AC1, "GPIO19_AC1"),
|
|
PINCTRL_PIN(DB8500_PIN_AB4, "GPIO20_AB4"),
|
|
PINCTRL_PIN(DB8500_PIN_AB3, "GPIO21_AB3"),
|
|
PINCTRL_PIN(DB8500_PIN_AA3, "GPIO22_AA3"),
|
|
PINCTRL_PIN(DB8500_PIN_AA4, "GPIO23_AA4"),
|
|
PINCTRL_PIN(DB8500_PIN_AB2, "GPIO24_AB2"),
|
|
PINCTRL_PIN(DB8500_PIN_Y4, "GPIO25_Y4"),
|
|
PINCTRL_PIN(DB8500_PIN_Y2, "GPIO26_Y2"),
|
|
PINCTRL_PIN(DB8500_PIN_AA2, "GPIO27_AA2"),
|
|
PINCTRL_PIN(DB8500_PIN_AA1, "GPIO28_AA1"),
|
|
PINCTRL_PIN(DB8500_PIN_W2, "GPIO29_W2"),
|
|
PINCTRL_PIN(DB8500_PIN_W3, "GPIO30_W3"),
|
|
PINCTRL_PIN(DB8500_PIN_V3, "GPIO31_V3"),
|
|
PINCTRL_PIN(DB8500_PIN_V2, "GPIO32_V2"),
|
|
PINCTRL_PIN(DB8500_PIN_AF2, "GPIO33_AF2"),
|
|
PINCTRL_PIN(DB8500_PIN_AE1, "GPIO34_AE1"),
|
|
PINCTRL_PIN(DB8500_PIN_AE2, "GPIO35_AE2"),
|
|
PINCTRL_PIN(DB8500_PIN_AG2, "GPIO36_AG2"),
|
|
/* Hole */
|
|
PINCTRL_PIN(DB8500_PIN_F3, "GPIO64_F3"),
|
|
PINCTRL_PIN(DB8500_PIN_F1, "GPIO65_F1"),
|
|
PINCTRL_PIN(DB8500_PIN_G3, "GPIO66_G3"),
|
|
PINCTRL_PIN(DB8500_PIN_G2, "GPIO67_G2"),
|
|
PINCTRL_PIN(DB8500_PIN_E1, "GPIO68_E1"),
|
|
PINCTRL_PIN(DB8500_PIN_E2, "GPIO69_E2"),
|
|
PINCTRL_PIN(DB8500_PIN_G5, "GPIO70_G5"),
|
|
PINCTRL_PIN(DB8500_PIN_G4, "GPIO71_G4"),
|
|
PINCTRL_PIN(DB8500_PIN_H4, "GPIO72_H4"),
|
|
PINCTRL_PIN(DB8500_PIN_H3, "GPIO73_H3"),
|
|
PINCTRL_PIN(DB8500_PIN_J3, "GPIO74_J3"),
|
|
PINCTRL_PIN(DB8500_PIN_H2, "GPIO75_H2"),
|
|
PINCTRL_PIN(DB8500_PIN_J2, "GPIO76_J2"),
|
|
PINCTRL_PIN(DB8500_PIN_H1, "GPIO77_H1"),
|
|
PINCTRL_PIN(DB8500_PIN_F4, "GPIO78_F4"),
|
|
PINCTRL_PIN(DB8500_PIN_E3, "GPIO79_E3"),
|
|
PINCTRL_PIN(DB8500_PIN_E4, "GPIO80_E4"),
|
|
PINCTRL_PIN(DB8500_PIN_D2, "GPIO81_D2"),
|
|
PINCTRL_PIN(DB8500_PIN_C1, "GPIO82_C1"),
|
|
PINCTRL_PIN(DB8500_PIN_D3, "GPIO83_D3"),
|
|
PINCTRL_PIN(DB8500_PIN_C2, "GPIO84_C2"),
|
|
PINCTRL_PIN(DB8500_PIN_D5, "GPIO85_D5"),
|
|
PINCTRL_PIN(DB8500_PIN_C6, "GPIO86_C6"),
|
|
PINCTRL_PIN(DB8500_PIN_B3, "GPIO87_B3"),
|
|
PINCTRL_PIN(DB8500_PIN_C4, "GPIO88_C4"),
|
|
PINCTRL_PIN(DB8500_PIN_E6, "GPIO89_E6"),
|
|
PINCTRL_PIN(DB8500_PIN_A3, "GPIO90_A3"),
|
|
PINCTRL_PIN(DB8500_PIN_B6, "GPIO91_B6"),
|
|
PINCTRL_PIN(DB8500_PIN_D6, "GPIO92_D6"),
|
|
PINCTRL_PIN(DB8500_PIN_B7, "GPIO93_B7"),
|
|
PINCTRL_PIN(DB8500_PIN_D7, "GPIO94_D7"),
|
|
PINCTRL_PIN(DB8500_PIN_E8, "GPIO95_E8"),
|
|
PINCTRL_PIN(DB8500_PIN_D8, "GPIO96_D8"),
|
|
PINCTRL_PIN(DB8500_PIN_D9, "GPIO97_D9"),
|
|
/* Hole */
|
|
PINCTRL_PIN(DB8500_PIN_A5, "GPIO128_A5"),
|
|
PINCTRL_PIN(DB8500_PIN_B4, "GPIO129_B4"),
|
|
PINCTRL_PIN(DB8500_PIN_C8, "GPIO130_C8"),
|
|
PINCTRL_PIN(DB8500_PIN_A12, "GPIO131_A12"),
|
|
PINCTRL_PIN(DB8500_PIN_C10, "GPIO132_C10"),
|
|
PINCTRL_PIN(DB8500_PIN_B10, "GPIO133_B10"),
|
|
PINCTRL_PIN(DB8500_PIN_B9, "GPIO134_B9"),
|
|
PINCTRL_PIN(DB8500_PIN_A9, "GPIO135_A9"),
|
|
PINCTRL_PIN(DB8500_PIN_C7, "GPIO136_C7"),
|
|
PINCTRL_PIN(DB8500_PIN_A7, "GPIO137_A7"),
|
|
PINCTRL_PIN(DB8500_PIN_C5, "GPIO138_C5"),
|
|
PINCTRL_PIN(DB8500_PIN_C9, "GPIO139_C9"),
|
|
PINCTRL_PIN(DB8500_PIN_B11, "GPIO140_B11"),
|
|
PINCTRL_PIN(DB8500_PIN_C12, "GPIO141_C12"),
|
|
PINCTRL_PIN(DB8500_PIN_C11, "GPIO142_C11"),
|
|
PINCTRL_PIN(DB8500_PIN_D12, "GPIO143_D12"),
|
|
PINCTRL_PIN(DB8500_PIN_B13, "GPIO144_B13"),
|
|
PINCTRL_PIN(DB8500_PIN_C13, "GPIO145_C13"),
|
|
PINCTRL_PIN(DB8500_PIN_D13, "GPIO146_D13"),
|
|
PINCTRL_PIN(DB8500_PIN_C15, "GPIO147_C15"),
|
|
PINCTRL_PIN(DB8500_PIN_B16, "GPIO148_B16"),
|
|
PINCTRL_PIN(DB8500_PIN_B14, "GPIO149_B14"),
|
|
PINCTRL_PIN(DB8500_PIN_C14, "GPIO150_C14"),
|
|
PINCTRL_PIN(DB8500_PIN_D17, "GPIO151_D17"),
|
|
PINCTRL_PIN(DB8500_PIN_D16, "GPIO152_D16"),
|
|
PINCTRL_PIN(DB8500_PIN_B17, "GPIO153_B17"),
|
|
PINCTRL_PIN(DB8500_PIN_C16, "GPIO154_C16"),
|
|
PINCTRL_PIN(DB8500_PIN_C19, "GPIO155_C19"),
|
|
PINCTRL_PIN(DB8500_PIN_C17, "GPIO156_C17"),
|
|
PINCTRL_PIN(DB8500_PIN_A18, "GPIO157_A18"),
|
|
PINCTRL_PIN(DB8500_PIN_C18, "GPIO158_C18"),
|
|
PINCTRL_PIN(DB8500_PIN_B19, "GPIO159_B19"),
|
|
PINCTRL_PIN(DB8500_PIN_B20, "GPIO160_B20"),
|
|
PINCTRL_PIN(DB8500_PIN_D21, "GPIO161_D21"),
|
|
PINCTRL_PIN(DB8500_PIN_D20, "GPIO162_D20"),
|
|
PINCTRL_PIN(DB8500_PIN_C20, "GPIO163_C20"),
|
|
PINCTRL_PIN(DB8500_PIN_B21, "GPIO164_B21"),
|
|
PINCTRL_PIN(DB8500_PIN_C21, "GPIO165_C21"),
|
|
PINCTRL_PIN(DB8500_PIN_A22, "GPIO166_A22"),
|
|
PINCTRL_PIN(DB8500_PIN_B24, "GPIO167_B24"),
|
|
PINCTRL_PIN(DB8500_PIN_C22, "GPIO168_C22"),
|
|
PINCTRL_PIN(DB8500_PIN_D22, "GPIO169_D22"),
|
|
PINCTRL_PIN(DB8500_PIN_C23, "GPIO170_C23"),
|
|
PINCTRL_PIN(DB8500_PIN_D23, "GPIO171_D23"),
|
|
/* Hole */
|
|
PINCTRL_PIN(DB8500_PIN_AJ27, "GPIO192_AJ27"),
|
|
PINCTRL_PIN(DB8500_PIN_AH27, "GPIO193_AH27"),
|
|
PINCTRL_PIN(DB8500_PIN_AF27, "GPIO194_AF27"),
|
|
PINCTRL_PIN(DB8500_PIN_AG28, "GPIO195_AG28"),
|
|
PINCTRL_PIN(DB8500_PIN_AG26, "GPIO196_AG26"),
|
|
PINCTRL_PIN(DB8500_PIN_AH24, "GPIO197_AH24"),
|
|
PINCTRL_PIN(DB8500_PIN_AG25, "GPIO198_AG25"),
|
|
PINCTRL_PIN(DB8500_PIN_AH23, "GPIO199_AH23"),
|
|
PINCTRL_PIN(DB8500_PIN_AH26, "GPIO200_AH26"),
|
|
PINCTRL_PIN(DB8500_PIN_AF24, "GPIO201_AF24"),
|
|
PINCTRL_PIN(DB8500_PIN_AF25, "GPIO202_AF25"),
|
|
PINCTRL_PIN(DB8500_PIN_AE23, "GPIO203_AE23"),
|
|
PINCTRL_PIN(DB8500_PIN_AF23, "GPIO204_AF23"),
|
|
PINCTRL_PIN(DB8500_PIN_AG23, "GPIO205_AG23"),
|
|
PINCTRL_PIN(DB8500_PIN_AG24, "GPIO206_AG24"),
|
|
PINCTRL_PIN(DB8500_PIN_AJ23, "GPIO207_AJ23"),
|
|
PINCTRL_PIN(DB8500_PIN_AH16, "GPIO208_AH16"),
|
|
PINCTRL_PIN(DB8500_PIN_AG15, "GPIO209_AG15"),
|
|
PINCTRL_PIN(DB8500_PIN_AJ15, "GPIO210_AJ15"),
|
|
PINCTRL_PIN(DB8500_PIN_AG14, "GPIO211_AG14"),
|
|
PINCTRL_PIN(DB8500_PIN_AF13, "GPIO212_AF13"),
|
|
PINCTRL_PIN(DB8500_PIN_AG13, "GPIO213_AG13"),
|
|
PINCTRL_PIN(DB8500_PIN_AH15, "GPIO214_AH15"),
|
|
PINCTRL_PIN(DB8500_PIN_AH13, "GPIO215_AH13"),
|
|
PINCTRL_PIN(DB8500_PIN_AG12, "GPIO216_AG12"),
|
|
PINCTRL_PIN(DB8500_PIN_AH12, "GPIO217_AH12"),
|
|
PINCTRL_PIN(DB8500_PIN_AH11, "GPIO218_AH11"),
|
|
PINCTRL_PIN(DB8500_PIN_AG10, "GPIO219_AG10"),
|
|
PINCTRL_PIN(DB8500_PIN_AH10, "GPIO220_AH10"),
|
|
PINCTRL_PIN(DB8500_PIN_AJ11, "GPIO221_AJ11"),
|
|
PINCTRL_PIN(DB8500_PIN_AJ9, "GPIO222_AJ9"),
|
|
PINCTRL_PIN(DB8500_PIN_AH9, "GPIO223_AH9"),
|
|
PINCTRL_PIN(DB8500_PIN_AG9, "GPIO224_AG9"),
|
|
PINCTRL_PIN(DB8500_PIN_AG8, "GPIO225_AG8"),
|
|
PINCTRL_PIN(DB8500_PIN_AF8, "GPIO226_AF8"),
|
|
PINCTRL_PIN(DB8500_PIN_AH7, "GPIO227_AH7"),
|
|
PINCTRL_PIN(DB8500_PIN_AJ6, "GPIO228_AJ6"),
|
|
PINCTRL_PIN(DB8500_PIN_AG7, "GPIO229_AG7"),
|
|
PINCTRL_PIN(DB8500_PIN_AF7, "GPIO230_AF7"),
|
|
/* Hole */
|
|
PINCTRL_PIN(DB8500_PIN_AF28, "GPIO256_AF28"),
|
|
PINCTRL_PIN(DB8500_PIN_AE29, "GPIO257_AE29"),
|
|
PINCTRL_PIN(DB8500_PIN_AD29, "GPIO258_AD29"),
|
|
PINCTRL_PIN(DB8500_PIN_AC29, "GPIO259_AC29"),
|
|
PINCTRL_PIN(DB8500_PIN_AD28, "GPIO260_AD28"),
|
|
PINCTRL_PIN(DB8500_PIN_AD26, "GPIO261_AD26"),
|
|
PINCTRL_PIN(DB8500_PIN_AE26, "GPIO262_AE26"),
|
|
PINCTRL_PIN(DB8500_PIN_AG29, "GPIO263_AG29"),
|
|
PINCTRL_PIN(DB8500_PIN_AE27, "GPIO264_AE27"),
|
|
PINCTRL_PIN(DB8500_PIN_AD27, "GPIO265_AD27"),
|
|
PINCTRL_PIN(DB8500_PIN_AC28, "GPIO266_AC28"),
|
|
PINCTRL_PIN(DB8500_PIN_AC27, "GPIO267_AC27"),
|
|
};
|
|
|
|
#define DB8500_GPIO_RANGE(a, b, c) { .name = "DB8500", .id = a, .base = b, \
|
|
.pin_base = b, .npins = c }
|
|
|
|
/*
|
|
* This matches the 32-pin gpio chips registered by the GPIO portion. This
|
|
* cannot be const since we assign the struct gpio_chip * pointer at runtime.
|
|
*/
|
|
static struct pinctrl_gpio_range nmk_db8500_ranges[] = {
|
|
DB8500_GPIO_RANGE(0, 0, 32),
|
|
DB8500_GPIO_RANGE(1, 32, 5),
|
|
DB8500_GPIO_RANGE(2, 64, 32),
|
|
DB8500_GPIO_RANGE(3, 96, 2),
|
|
DB8500_GPIO_RANGE(4, 128, 32),
|
|
DB8500_GPIO_RANGE(5, 160, 12),
|
|
DB8500_GPIO_RANGE(6, 192, 32),
|
|
DB8500_GPIO_RANGE(7, 224, 7),
|
|
DB8500_GPIO_RANGE(8, 256, 12),
|
|
};
|
|
|
|
/*
|
|
* Read the pin group names like this:
|
|
* u0_a_1 = first groups of pins for uart0 on alt function a
|
|
* i2c2_b_2 = second group of pins for i2c2 on alt function b
|
|
*
|
|
* The groups are arranged as sets per altfunction column, so we can
|
|
* mux in one group at a time by selecting the same altfunction for them
|
|
* all. When functions require pins on different altfunctions, you need
|
|
* to combine several groups.
|
|
*/
|
|
|
|
/* Altfunction A column */
|
|
static const unsigned u0_a_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3,
|
|
DB8500_PIN_AH4, DB8500_PIN_AH3 };
|
|
static const unsigned u1rxtx_a_1_pins[] = { DB8500_PIN_AH6, DB8500_PIN_AG6 };
|
|
static const unsigned u1ctsrts_a_1_pins[] = { DB8500_PIN_AF6, DB8500_PIN_AG5 };
|
|
/* Image processor I2C line, this is driven by image processor firmware */
|
|
static const unsigned ipi2c_a_1_pins[] = { DB8500_PIN_AD5, DB8500_PIN_AE4 };
|
|
static const unsigned ipi2c_a_2_pins[] = { DB8500_PIN_AF5, DB8500_PIN_AG4 };
|
|
/* MSP0 can only be on these pins, but TXD and RXD can be flipped */
|
|
static const unsigned msp0txrx_a_1_pins[] = { DB8500_PIN_AC4, DB8500_PIN_AC3 };
|
|
static const unsigned msp0tfstck_a_1_pins[] = { DB8500_PIN_AF3, DB8500_PIN_AE3 };
|
|
static const unsigned msp0rfsrck_a_1_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 };
|
|
/* Basic pins of the MMC/SD card 0 interface */
|
|
static const unsigned mc0_a_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1,
|
|
DB8500_PIN_AB4, DB8500_PIN_AA3, DB8500_PIN_AA4, DB8500_PIN_AB2,
|
|
DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
|
|
/* Often only 4 bits are used, then these are not needed (only used for MMC) */
|
|
static const unsigned mc0_dat47_a_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3,
|
|
DB8500_PIN_V3, DB8500_PIN_V2};
|
|
static const unsigned mc0dat31dir_a_1_pins[] = { DB8500_PIN_AB3 };
|
|
/* MSP1 can only be on these pins, but TXD and RXD can be flipped */
|
|
static const unsigned msp1txrx_a_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AG2 };
|
|
static const unsigned msp1_a_1_pins[] = { DB8500_PIN_AE1, DB8500_PIN_AE2 };
|
|
/* LCD interface */
|
|
static const unsigned lcdb_a_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1,
|
|
DB8500_PIN_G3, DB8500_PIN_G2 };
|
|
static const unsigned lcdvsi0_a_1_pins[] = { DB8500_PIN_E1 };
|
|
static const unsigned lcdvsi1_a_1_pins[] = { DB8500_PIN_E2 };
|
|
static const unsigned lcd_d0_d7_a_1_pins[] = {
|
|
DB8500_PIN_G5, DB8500_PIN_G4, DB8500_PIN_H4, DB8500_PIN_H3,
|
|
DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1 };
|
|
/* D8 thru D11 often used as TVOUT lines */
|
|
static const unsigned lcd_d8_d11_a_1_pins[] = { DB8500_PIN_F4,
|
|
DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2 };
|
|
static const unsigned lcd_d12_d23_a_1_pins[] = {
|
|
DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5,
|
|
DB8500_PIN_C6, DB8500_PIN_B3, DB8500_PIN_C4, DB8500_PIN_E6,
|
|
DB8500_PIN_A3, DB8500_PIN_B6, DB8500_PIN_D6, DB8500_PIN_B7 };
|
|
static const unsigned kp_a_1_pins[] = { DB8500_PIN_D7, DB8500_PIN_E8,
|
|
DB8500_PIN_D8, DB8500_PIN_D9 };
|
|
static const unsigned kpskaskb_a_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16 };
|
|
static const unsigned kp_a_2_pins[] = {
|
|
DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
|
|
DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
|
|
DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21,
|
|
DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
|
|
/* MC2 has 8 data lines and no direction control, so only for (e)MMC */
|
|
static const unsigned mc2_a_1_pins[] = { DB8500_PIN_A5, DB8500_PIN_B4,
|
|
DB8500_PIN_C8, DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10,
|
|
DB8500_PIN_B9, DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7,
|
|
DB8500_PIN_C5 };
|
|
static const unsigned ssp1_a_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11,
|
|
DB8500_PIN_C12, DB8500_PIN_C11 };
|
|
static const unsigned ssp0_a_1_pins[] = { DB8500_PIN_D12, DB8500_PIN_B13,
|
|
DB8500_PIN_C13, DB8500_PIN_D13 };
|
|
static const unsigned i2c0_a_1_pins[] = { DB8500_PIN_C15, DB8500_PIN_B16 };
|
|
/*
|
|
* Image processor GPIO pins are named "ipgpio" and have their own
|
|
* numberspace
|
|
*/
|
|
static const unsigned ipgpio0_a_1_pins[] = { DB8500_PIN_B14 };
|
|
static const unsigned ipgpio1_a_1_pins[] = { DB8500_PIN_C14 };
|
|
/* Three modem pins named RF_PURn, MODEM_STATE and MODEM_PWREN */
|
|
static const unsigned modem_a_1_pins[] = { DB8500_PIN_D22, DB8500_PIN_C23,
|
|
DB8500_PIN_D23 };
|
|
/*
|
|
* This MSP cannot switch RX and TX, SCK in a separate group since this
|
|
* seems to be optional.
|
|
*/
|
|
static const unsigned msp2sck_a_1_pins[] = { DB8500_PIN_AJ27 };
|
|
static const unsigned msp2_a_1_pins[] = { DB8500_PIN_AH27, DB8500_PIN_AF27,
|
|
DB8500_PIN_AG28, DB8500_PIN_AG26 };
|
|
static const unsigned mc4_a_1_pins[] = { DB8500_PIN_AH24, DB8500_PIN_AG25,
|
|
DB8500_PIN_AH23, DB8500_PIN_AH26, DB8500_PIN_AF24, DB8500_PIN_AF25,
|
|
DB8500_PIN_AE23, DB8500_PIN_AF23, DB8500_PIN_AG23, DB8500_PIN_AG24,
|
|
DB8500_PIN_AJ23 };
|
|
/* MC1 has only 4 data pins, designed for SD or SDIO exclusively */
|
|
static const unsigned mc1_a_1_pins[] = { DB8500_PIN_AH16, DB8500_PIN_AG15,
|
|
DB8500_PIN_AJ15, DB8500_PIN_AG14, DB8500_PIN_AF13, DB8500_PIN_AG13,
|
|
DB8500_PIN_AH15 };
|
|
static const unsigned mc1dir_a_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
|
|
DB8500_PIN_AH12, DB8500_PIN_AH11 };
|
|
static const unsigned hsir_a_1_pins[] = { DB8500_PIN_AG10, DB8500_PIN_AH10 };
|
|
static const unsigned hsit_a_1_pins[] = { DB8500_PIN_AJ11, DB8500_PIN_AJ9,
|
|
DB8500_PIN_AH9, DB8500_PIN_AG9, DB8500_PIN_AG8, DB8500_PIN_AF8 };
|
|
static const unsigned clkout_a_1_pins[] = { DB8500_PIN_AH7, DB8500_PIN_AJ6 };
|
|
static const unsigned clkout_a_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
|
|
static const unsigned usb_a_1_pins[] = { DB8500_PIN_AF28, DB8500_PIN_AE29,
|
|
DB8500_PIN_AD29, DB8500_PIN_AC29, DB8500_PIN_AD28, DB8500_PIN_AD26,
|
|
DB8500_PIN_AE26, DB8500_PIN_AG29, DB8500_PIN_AE27, DB8500_PIN_AD27,
|
|
DB8500_PIN_AC28, DB8500_PIN_AC27 };
|
|
|
|
/* Altfunction B column */
|
|
static const unsigned trig_b_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3 };
|
|
static const unsigned i2c4_b_1_pins[] = { DB8500_PIN_AH6, DB8500_PIN_AG6 };
|
|
static const unsigned i2c1_b_1_pins[] = { DB8500_PIN_AF6, DB8500_PIN_AG5 };
|
|
static const unsigned i2c2_b_1_pins[] = { DB8500_PIN_AD5, DB8500_PIN_AE4 };
|
|
static const unsigned i2c2_b_2_pins[] = { DB8500_PIN_AF5, DB8500_PIN_AG4 };
|
|
static const unsigned msp0txrx_b_1_pins[] = { DB8500_PIN_AC4, DB8500_PIN_AC3 };
|
|
static const unsigned i2c1_b_2_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 };
|
|
/* Just RX and TX for UART2 */
|
|
static const unsigned u2rxtx_b_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1 };
|
|
static const unsigned uartmodtx_b_1_pins[] = { DB8500_PIN_AB4 };
|
|
static const unsigned msp0sck_b_1_pins[] = { DB8500_PIN_AB3 };
|
|
static const unsigned uartmodrx_b_1_pins[] = { DB8500_PIN_AA3 };
|
|
static const unsigned stmmod_b_1_pins[] = { DB8500_PIN_AA4, DB8500_PIN_Y4,
|
|
DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
|
|
static const unsigned uartmodrx_b_2_pins[] = { DB8500_PIN_AB2 };
|
|
static const unsigned spi3_b_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3,
|
|
DB8500_PIN_V3, DB8500_PIN_V2 };
|
|
static const unsigned msp1txrx_b_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AG2 };
|
|
static const unsigned kp_b_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1,
|
|
DB8500_PIN_G3, DB8500_PIN_G2, DB8500_PIN_E1, DB8500_PIN_E2,
|
|
DB8500_PIN_G5, DB8500_PIN_G4, DB8500_PIN_H4, DB8500_PIN_H3,
|
|
DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1,
|
|
DB8500_PIN_F4, DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2,
|
|
DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5 };
|
|
static const unsigned sm_b_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
|
|
DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
|
|
DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8,
|
|
DB8500_PIN_D9, DB8500_PIN_A5, DB8500_PIN_B4, DB8500_PIN_C8,
|
|
DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10, DB8500_PIN_B9,
|
|
DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7, DB8500_PIN_C5,
|
|
DB8500_PIN_C9, DB8500_PIN_B14 };
|
|
/* This chip select pin can be "ps0" in alt B so have it separately */
|
|
static const unsigned smcs0_b_1_pins[] = { DB8500_PIN_E8 };
|
|
static const unsigned ipgpio7_b_1_pins[] = { DB8500_PIN_B11 };
|
|
static const unsigned ipgpio2_b_1_pins[] = { DB8500_PIN_C12 };
|
|
static const unsigned ipgpio3_b_1_pins[] = { DB8500_PIN_C11 };
|
|
static const unsigned lcdaclk_b_1_pins[] = { DB8500_PIN_C14 };
|
|
static const unsigned lcda_b_1_pins[] = { DB8500_PIN_D22,
|
|
DB8500_PIN_C23, DB8500_PIN_D23 };
|
|
static const unsigned lcd_b_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
|
|
DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
|
|
DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
|
|
DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21,
|
|
DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
|
|
static const unsigned ddrtrig_b_1_pins[] = { DB8500_PIN_AJ27 };
|
|
static const unsigned pwl_b_1_pins[] = { DB8500_PIN_AF25 };
|
|
static const unsigned spi1_b_1_pins[] = { DB8500_PIN_AG15, DB8500_PIN_AF13,
|
|
DB8500_PIN_AG13, DB8500_PIN_AH15 };
|
|
static const unsigned mc3_b_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
|
|
DB8500_PIN_AH12, DB8500_PIN_AH11, DB8500_PIN_AG10, DB8500_PIN_AH10,
|
|
DB8500_PIN_AJ11, DB8500_PIN_AJ9, DB8500_PIN_AH9, DB8500_PIN_AG9,
|
|
DB8500_PIN_AG8 };
|
|
static const unsigned pwl_b_2_pins[] = { DB8500_PIN_AF8 };
|
|
static const unsigned pwl_b_3_pins[] = { DB8500_PIN_AG7 };
|
|
static const unsigned pwl_b_4_pins[] = { DB8500_PIN_AF7 };
|
|
|
|
/* Altfunction C column */
|
|
static const unsigned ipjtag_c_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3,
|
|
DB8500_PIN_AH4, DB8500_PIN_AH3, DB8500_PIN_AH6 };
|
|
static const unsigned ipgpio6_c_1_pins[] = { DB8500_PIN_AG6 };
|
|
static const unsigned ipgpio0_c_1_pins[] = { DB8500_PIN_AF6 };
|
|
static const unsigned ipgpio1_c_1_pins[] = { DB8500_PIN_AG5 };
|
|
static const unsigned ipgpio3_c_1_pins[] = { DB8500_PIN_AF5 };
|
|
static const unsigned ipgpio2_c_1_pins[] = { DB8500_PIN_AG4 };
|
|
static const unsigned slim0_c_1_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 };
|
|
/* Optional 4-bit Memory Stick interface */
|
|
static const unsigned ms_c_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1,
|
|
DB8500_PIN_AB3, DB8500_PIN_AA3, DB8500_PIN_AA4, DB8500_PIN_AB2,
|
|
DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
|
|
static const unsigned iptrigout_c_1_pins[] = { DB8500_PIN_AB4 };
|
|
static const unsigned u2rxtx_c_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3 };
|
|
static const unsigned u2ctsrts_c_1_pins[] = { DB8500_PIN_V3, DB8500_PIN_V2 };
|
|
static const unsigned u0_c_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AE1,
|
|
DB8500_PIN_AE2, DB8500_PIN_AG2 };
|
|
static const unsigned ipgpio4_c_1_pins[] = { DB8500_PIN_F3 };
|
|
static const unsigned ipgpio5_c_1_pins[] = { DB8500_PIN_F1 };
|
|
static const unsigned ipgpio6_c_2_pins[] = { DB8500_PIN_G3 };
|
|
static const unsigned ipgpio7_c_1_pins[] = { DB8500_PIN_G2 };
|
|
static const unsigned smcleale_c_1_pins[] = { DB8500_PIN_E1, DB8500_PIN_E2 };
|
|
static const unsigned stmape_c_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
|
|
DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3 };
|
|
static const unsigned u2rxtx_c_2_pins[] = { DB8500_PIN_H2, DB8500_PIN_J2 };
|
|
static const unsigned ipgpio2_c_2_pins[] = { DB8500_PIN_F4 };
|
|
static const unsigned ipgpio3_c_2_pins[] = { DB8500_PIN_E3 };
|
|
static const unsigned ipgpio4_c_2_pins[] = { DB8500_PIN_E4 };
|
|
static const unsigned ipgpio5_c_2_pins[] = { DB8500_PIN_D2 };
|
|
static const unsigned mc5_c_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
|
|
DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
|
|
DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8,
|
|
DB8500_PIN_D9 };
|
|
static const unsigned mc2rstn_c_1_pins[] = { DB8500_PIN_C8 };
|
|
static const unsigned kp_c_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11,
|
|
DB8500_PIN_C12, DB8500_PIN_C11, DB8500_PIN_D17, DB8500_PIN_D16,
|
|
DB8500_PIN_C23, DB8500_PIN_D23 };
|
|
static const unsigned smps1_c_1_pins[] = { DB8500_PIN_B14 };
|
|
static const unsigned u2rxtx_c_3_pins[] = { DB8500_PIN_B17, DB8500_PIN_C16 };
|
|
static const unsigned stmape_c_2_pins[] = { DB8500_PIN_C19, DB8500_PIN_C17,
|
|
DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19 };
|
|
static const unsigned uartmodrx_c_1_pins[] = { DB8500_PIN_D21 };
|
|
static const unsigned uartmodtx_c_1_pins[] = { DB8500_PIN_D20 };
|
|
static const unsigned stmmod_c_1_pins[] = { DB8500_PIN_C20, DB8500_PIN_B21,
|
|
DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24 };
|
|
static const unsigned usbsim_c_1_pins[] = { DB8500_PIN_D22 };
|
|
static const unsigned mc4rstn_c_1_pins[] = { DB8500_PIN_AF25 };
|
|
static const unsigned clkout_c_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12 };
|
|
static const unsigned i2c3_c_1_pins[] = { DB8500_PIN_AG12, DB8500_PIN_AH11 };
|
|
static const unsigned spi0_c_1_pins[] = { DB8500_PIN_AH10, DB8500_PIN_AH9,
|
|
DB8500_PIN_AG9, DB8500_PIN_AG8 };
|
|
static const unsigned usbsim_c_2_pins[] = { DB8500_PIN_AF8 };
|
|
static const unsigned i2c3_c_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
|
|
|
|
/* Other C1 column */
|
|
static const unsigned kp_oc1_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
|
|
DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
|
|
DB8500_PIN_D6, DB8500_PIN_B7 };
|
|
static const unsigned spi2_oc1_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
|
|
DB8500_PIN_AH12, DB8500_PIN_AH11 };
|
|
|
|
#define DB8500_PIN_GROUP(a,b) { .name = #a, .pins = a##_pins, \
|
|
.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
|
|
|
|
static const struct nmk_pingroup nmk_db8500_groups[] = {
|
|
/* Altfunction A column */
|
|
DB8500_PIN_GROUP(u0_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(u1rxtx_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(u1ctsrts_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(ipi2c_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(ipi2c_a_2, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(msp0txrx_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(msp0tfstck_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(msp0rfsrck_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(mc0_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(msp1txrx_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(msp1_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(lcdb_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(lcdvsi0_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(lcdvsi1_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(lcd_d0_d7_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(lcd_d8_d11_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(lcd_d12_d23_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(kp_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(mc2_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(ssp1_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(ssp0_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(ipgpio0_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(ipgpio1_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(msp2sck_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(msp2_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(mc4_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(mc1_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A),
|
|
DB8500_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A),
|
|
/* Altfunction B column */
|
|
DB8500_PIN_GROUP(trig_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(i2c4_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(i2c1_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(i2c2_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(i2c2_b_2, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(msp0txrx_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(i2c1_b_2, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(u2rxtx_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(uartmodtx_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(msp0sck_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(uartmodrx_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(stmmod_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(uartmodrx_b_2, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(spi3_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(msp1txrx_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(kp_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(sm_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(smcs0_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(ipgpio7_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(ipgpio2_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(ipgpio3_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(lcdaclk_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(lcda_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(lcd_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(ddrtrig_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(pwl_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(spi1_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(mc3_b_1, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(pwl_b_2, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(pwl_b_3, NMK_GPIO_ALT_B),
|
|
DB8500_PIN_GROUP(pwl_b_4, NMK_GPIO_ALT_B),
|
|
/* Altfunction C column */
|
|
DB8500_PIN_GROUP(ipjtag_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio6_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio0_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio1_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio3_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio2_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(slim0_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ms_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(iptrigout_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(u2rxtx_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(u2ctsrts_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(u0_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio4_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio5_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio6_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio7_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(smcleale_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(stmape_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(u2rxtx_c_2, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio2_c_2, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio3_c_2, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio4_c_2, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(ipgpio5_c_2, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(mc5_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(mc2rstn_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(kp_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(smps1_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(u2rxtx_c_3, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(stmape_c_2, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(uartmodrx_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(uartmodtx_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(stmmod_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(usbsim_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(mc4rstn_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(clkout_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(i2c3_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(spi0_c_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(usbsim_c_2, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(i2c3_c_2, NMK_GPIO_ALT_C),
|
|
/* Other alt C1 column, these are still configured as alt C */
|
|
DB8500_PIN_GROUP(kp_oc1_1, NMK_GPIO_ALT_C),
|
|
DB8500_PIN_GROUP(spi2_oc1_1, NMK_GPIO_ALT_C),
|
|
};
|
|
|
|
/* We use this macro to define the groups applicable to a function */
|
|
#define DB8500_FUNC_GROUPS(a, b...) \
|
|
static const char * const a##_groups[] = { b };
|
|
|
|
DB8500_FUNC_GROUPS(u0, "u0_a_1", "u0_c_1");
|
|
DB8500_FUNC_GROUPS(u1, "u1rxtx_a_1", "u1ctsrts_a_1");
|
|
/*
|
|
* UART2 can be muxed out with just RX/TX in four places, CTS+RTS is however
|
|
* only available on two pins in alternative function C
|
|
*/
|
|
DB8500_FUNC_GROUPS(u2, "u2rxtx_b_1", "u2rxtx_c_1", "u2ctsrts_c_1",
|
|
"u2rxtx_c_2", "u2rxtx_c_3");
|
|
DB8500_FUNC_GROUPS(ipi2c, "ipi2c_a_1", "ipi2c_a_2");
|
|
/*
|
|
* MSP0 can only be on a certain set of pins, but the TX/RX pins can be
|
|
* switched around by selecting the altfunction A or B. The SCK pin is
|
|
* only available on the altfunction B.
|
|
*/
|
|
DB8500_FUNC_GROUPS(msp0, "msp0txrx_a_1", "msp0tfstck_a_1", "msp0rfstck_a_1",
|
|
"msp0txrx_b_1", "msp0sck_b_1");
|
|
DB8500_FUNC_GROUPS(mc0, "mc0_a_1");
|
|
/* MSP0 can swap RX/TX like MSP0 but has no SCK pin available */
|
|
DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1");
|
|
DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1");
|
|
DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1",
|
|
"lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1");
|
|
DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_c_1", "kp_oc1_1");
|
|
DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1");
|
|
DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1");
|
|
DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1");
|
|
DB8500_FUNC_GROUPS(i2c0, "i2c0_a_1");
|
|
/* The image processor has 8 GPIO pins that can be muxed out */
|
|
DB8500_FUNC_GROUPS(ipgpio, "ipgpio0_a_1", "ipgpio1_a_1", "ipgpio7_b_1",
|
|
"ipgpio2_b_1", "ipgpio3_b_1", "ipgpio6_c_1", "ipgpio0_c_1",
|
|
"ipgpio1_c_1", "ipgpio3_c_1", "ipgpio2_c_1", "ipgpio4_c_1",
|
|
"ipgpio5_c_1", "ipgpio6_c_2", "ipgpio7_c_1", "ipgpio2_c_2",
|
|
"ipgpio3_c_2", "ipgpio4_c_2", "ipgpio5_c_2");
|
|
/* MSP2 can not invert the RX/TX pins but has the optional SCK pin */
|
|
DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1");
|
|
DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1");
|
|
DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1dir_a_1");
|
|
DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1");
|
|
DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1");
|
|
DB8500_FUNC_GROUPS(usb, "usb_a_1");
|
|
DB8500_FUNC_GROUPS(trig, "trig_b_1");
|
|
DB8500_FUNC_GROUPS(i2c4, "i2c4_b_1");
|
|
DB8500_FUNC_GROUPS(i2c1, "i2c1_b_1", "i2c1_b_2");
|
|
DB8500_FUNC_GROUPS(i2c2, "i2c2_b_1", "i2c2_b_2");
|
|
/*
|
|
* The modem UART can output its RX and TX pins in some different places,
|
|
* so select one of each.
|
|
*/
|
|
DB8500_FUNC_GROUPS(uartmod, "uartmodtx_b_1", "uartmodrx_b_1", "uartmodrx_b_2",
|
|
"uartmodrx_c_1", "uartmod_tx_c_1");
|
|
DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1");
|
|
DB8500_FUNC_GROUPS(spi3, "spi3_b_1");
|
|
/* Select between CS0 on alt B or PS1 on alt C */
|
|
DB8500_FUNC_GROUPS(sm, "sm_b_1", "smcs0_b_1", "smcleale_c_1", "smps1_c_1");
|
|
DB8500_FUNC_GROUPS(lcda, "lcdaclk_b_1", "lcda_b_1");
|
|
DB8500_FUNC_GROUPS(ddrtrig, "ddrtrig_b_1");
|
|
DB8500_FUNC_GROUPS(pwl, "pwl_b_1", "pwl_b_2", "pwl_b_3", "pwl_b_4");
|
|
DB8500_FUNC_GROUPS(spi1, "spi1_b_1");
|
|
DB8500_FUNC_GROUPS(mc3, "mc3_b_1");
|
|
DB8500_FUNC_GROUPS(ipjtag, "ipjtag_c_1");
|
|
DB8500_FUNC_GROUPS(slim0, "slim0_c_1");
|
|
DB8500_FUNC_GROUPS(ms, "ms_c_1");
|
|
DB8500_FUNC_GROUPS(iptrigout, "iptrigout_c_1");
|
|
DB8500_FUNC_GROUPS(stmape, "stmape_c_1", "stmape_c_2");
|
|
DB8500_FUNC_GROUPS(mc5, "mc5_c_1");
|
|
DB8500_FUNC_GROUPS(usbsim, "usbsim_c_1", "usbsim_c_2");
|
|
DB8500_FUNC_GROUPS(i2c3, "i2c3_c_1", "i2c3_c_2");
|
|
DB8500_FUNC_GROUPS(spi0, "spi0_c_1");
|
|
DB8500_FUNC_GROUPS(spi2, "spi2_oc1_1");
|
|
|
|
#define FUNCTION(fname) \
|
|
{ \
|
|
.name = #fname, \
|
|
.groups = fname##_groups, \
|
|
.ngroups = ARRAY_SIZE(fname##_groups), \
|
|
}
|
|
|
|
static const struct nmk_function nmk_db8500_functions[] = {
|
|
FUNCTION(u0),
|
|
FUNCTION(u1),
|
|
FUNCTION(u2),
|
|
FUNCTION(ipi2c),
|
|
FUNCTION(msp0),
|
|
FUNCTION(mc0),
|
|
FUNCTION(msp1),
|
|
FUNCTION(lcdb),
|
|
FUNCTION(lcd),
|
|
FUNCTION(kp),
|
|
FUNCTION(mc2),
|
|
FUNCTION(ssp1),
|
|
FUNCTION(ssp0),
|
|
FUNCTION(i2c0),
|
|
FUNCTION(ipgpio),
|
|
FUNCTION(msp2),
|
|
FUNCTION(mc4),
|
|
FUNCTION(mc1),
|
|
FUNCTION(hsi),
|
|
FUNCTION(clkout),
|
|
FUNCTION(usb),
|
|
FUNCTION(trig),
|
|
FUNCTION(i2c4),
|
|
FUNCTION(i2c1),
|
|
FUNCTION(i2c2),
|
|
FUNCTION(uartmod),
|
|
FUNCTION(stmmod),
|
|
FUNCTION(spi3),
|
|
FUNCTION(sm),
|
|
FUNCTION(lcda),
|
|
FUNCTION(ddrtrig),
|
|
FUNCTION(pwl),
|
|
FUNCTION(spi1),
|
|
FUNCTION(mc3),
|
|
FUNCTION(ipjtag),
|
|
FUNCTION(slim0),
|
|
FUNCTION(ms),
|
|
FUNCTION(iptrigout),
|
|
FUNCTION(stmape),
|
|
FUNCTION(mc5),
|
|
FUNCTION(usbsim),
|
|
FUNCTION(i2c3),
|
|
FUNCTION(spi0),
|
|
FUNCTION(spi2),
|
|
};
|
|
|
|
static const struct nmk_pinctrl_soc_data nmk_db8500_soc = {
|
|
.gpio_ranges = nmk_db8500_ranges,
|
|
.gpio_num_ranges = ARRAY_SIZE(nmk_db8500_ranges),
|
|
.pins = nmk_db8500_pins,
|
|
.npins = ARRAY_SIZE(nmk_db8500_pins),
|
|
.functions = nmk_db8500_functions,
|
|
.nfunctions = ARRAY_SIZE(nmk_db8500_functions),
|
|
.groups = nmk_db8500_groups,
|
|
.ngroups = ARRAY_SIZE(nmk_db8500_groups),
|
|
};
|
|
|
|
void __devinit
|
|
nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc)
|
|
{
|
|
*soc = &nmk_db8500_soc;
|
|
}
|