renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code
5742964e91
linux-next/arch/arm/mach-pxa/littleton.c
Eric Miao 51c62982a3 [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 
Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:

  <mach/pxa25x.h>  - for pxa25x based platforms
  <mach/pxa27x.h>  - for pxa27x based platforms
  <mach/pxa300.h>  - for pxa300 based platforms
  <mach/pxa320.h>  - for pxa320 based platforms
  <mach/pxa930.h>  - for pxa930 based platforms

NOTE:

1. one header one board file, they are not compatible (i.e. they have
   conflicting definitions which won't compile if included together).

2. Unless strictly necessary, the following header files are considered
   to be SoC files use _only_, and is not recommended to be included in
   board code:

    <mach/hardware.h>
    <mach/pxa-regs.h>
    <mach/pxa2xx-regs.h>
    <mach/pxa3xx-regs.h>
    <mach/mfp.h>
    <mach/mfp-pxa2xx.h>
    <mach/mfp-pxa25x.h>
    <mach/mfp-pxa27x.h>
    <mach/mfp-pxa3xx.h>
    <mach/mfp-pxa300.h>
    <mach/mfp-pxa320.h>
    <mach/mfp-pxa930.h>

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:36 +08:00

415 lines
9.6 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-pxa/littleton.c
*
* Support for the Marvell Littleton Development Platform.
*
* Author: Jason Chagas (largely modified code)
* Created: Nov 20, 2006
* Copyright: (C) Copyright 2006 Marvell International Ltd.
*
* 2007-11-22 modified to align with latest kernel
* eric miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/smc91x.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/mfd/da903x.h>
#include <linux/i2c/max732x.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
#include <mach/i2c.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
#include "generic.h"
/* Littleton MFP configurations */
static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
GPIO55_LCD_LDD_1,
GPIO56_LCD_LDD_2,
GPIO57_LCD_LDD_3,
GPIO58_LCD_LDD_4,
GPIO59_LCD_LDD_5,
GPIO60_LCD_LDD_6,
GPIO61_LCD_LDD_7,
GPIO62_LCD_LDD_8,
GPIO63_LCD_LDD_9,
GPIO64_LCD_LDD_10,
GPIO65_LCD_LDD_11,
GPIO66_LCD_LDD_12,
GPIO67_LCD_LDD_13,
GPIO68_LCD_LDD_14,
GPIO69_LCD_LDD_15,
GPIO70_LCD_LDD_16,
GPIO71_LCD_LDD_17,
GPIO72_LCD_FCLK,
GPIO73_LCD_LCLK,
GPIO74_LCD_PCLK,
GPIO75_LCD_BIAS,
/* SSP2 */
GPIO25_SSP2_SCLK,
GPIO27_SSP2_TXD,
GPIO17_GPIO, /* SFRM as chip-select */
/* Debug Ethernet */
GPIO90_GPIO,
/* Keypad */
GPIO107_KP_DKIN_0,
GPIO108_KP_DKIN_1,
GPIO115_KP_MKIN_0,
GPIO116_KP_MKIN_1,
GPIO117_KP_MKIN_2,
GPIO118_KP_MKIN_3,
GPIO119_KP_MKIN_4,
GPIO120_KP_MKIN_5,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
GPIO124_KP_MKOUT_3,
GPIO125_KP_MKOUT_4,
};
static struct resource smc91x_resources[] = {
[0] = {
.start = (LITTLETON_ETH_PHYS + 0x300),
.end = (LITTLETON_ETH_PHYS + 0xfffff),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
.end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
}
};
static struct smc91x_platdata littleton_smc91x_info = {
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
SMC91X_NOWAIT | SMC91X_USE_DMA,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &littleton_smc91x_info,
},
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
[0] = {
/* VGA */
.pixclock = 38250,
.xres = 480,
.yres = 640,
.bpp = 16,
.hsync_len = 8,
.left_margin = 8,
.right_margin = 24,
.vsync_len = 2,
.upper_margin = 2,
.lower_margin = 4,
.sync = 0,
},
[1] = {
/* QVGA */
.pixclock = 153000,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 8,
.left_margin = 8,
.right_margin = 88,
.vsync_len = 2,
.upper_margin = 2,
.lower_margin = 2,
.sync = 0,
},
};
static struct pxafb_mach_info littleton_lcd_info = {
.modes = tpo_tdo24mtea1_modes,
.num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static void littleton_init_lcd(void)
{
set_pxa_fb_info(&littleton_lcd_info);
}
#else
static inline void littleton_init_lcd(void) {};
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
static struct pxa2xx_spi_master littleton_spi_info = {
.num_chipselect = 1,
};
static void littleton_tdo24m_cs(u32 cmd)
{
gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
}
static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
.rx_threshold = 1,
.tx_threshold = 1,
.cs_control = littleton_tdo24m_cs,
};
static struct spi_board_info littleton_spi_devices[] __initdata = {
{
.modalias = "tdo24m",
.max_speed_hz = 1000000,
.bus_num = 2,
.chip_select = 0,
.controller_data= &littleton_tdo24m_chip,
},
};
static void __init littleton_init_spi(void)
{
int err;
err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
if (err) {
pr_warning("failed to request GPIO for LCS CS\n");
return;
}
gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
pxa2xx_set_spi_info(2, &littleton_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
}
#else
static inline void littleton_init_spi(void) {}
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int littleton_matrix_key_map[] = {
/* KEY(row, col, key_code) */
KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
KEY(0, 3, KEY_KPASTERISK), /* * */
KEY(2, 3, KEY_KPDOT), /* # */
KEY(5, 4, KEY_ENTER),
KEY(5, 0, KEY_UP),
KEY(5, 1, KEY_DOWN),
KEY(5, 2, KEY_LEFT),
KEY(5, 3, KEY_RIGHT),
KEY(3, 2, KEY_HOME),
KEY(4, 1, KEY_END),
KEY(3, 3, KEY_BACK),
KEY(4, 0, KEY_SEND),
KEY(4, 2, KEY_VOLUMEUP),
KEY(4, 3, KEY_VOLUMEDOWN),
KEY(3, 0, KEY_F22), /* soft1 */
KEY(3, 1, KEY_F23), /* soft2 */
};
static struct pxa27x_keypad_platform_data littleton_keypad_info = {
.matrix_key_rows = 6,
.matrix_key_cols = 5,
.matrix_key_map = littleton_matrix_key_map,
.matrix_key_map_size = ARRAY_SIZE(littleton_matrix_key_map),
.enable_rotary0 = 1,
.rotary0_up_key = KEY_UP,
.rotary0_down_key = KEY_DOWN,
.debounce_interval = 30,
};
static void __init littleton_init_keypad(void)
{
pxa_set_keypad_info(&littleton_keypad_info);
}
#else
static inline void littleton_init_keypad(void) {}
#endif
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition littleton_nand_partitions[] = {
[0] = {
.name = "Bootloader",
.offset = 0,
.size = 0x060000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[1] = {
.name = "Kernel",
.offset = 0x060000,
.size = 0x200000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[2] = {
.name = "Filesystem",
.offset = 0x0260000,
.size = 0x3000000, /* 48M - rootfs */
},
[3] = {
.name = "MassStorage",
.offset = 0x3260000,
.size = 0x3d40000,
},
[4] = {
.name = "BBT",
.offset = 0x6FA0000,
.size = 0x80000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* NOTE: we reserve some blocks at the end of the NAND flash for
* bad block management, and the max number of relocation blocks
* differs on different platforms. Please take care with it when
* defining the partition table.
*/
};
static struct pxa3xx_nand_platform_data littleton_nand_info = {
.enable_arbiter = 1,
.parts = littleton_nand_partitions,
.nr_parts = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
{
pxa3xx_set_nand_info(&littleton_nand_info);
}
#else
static inline void littleton_init_nand(void) {}
#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
static struct led_info littleton_da9034_leds[] = {
[0] = {
.name = "littleton:keypad1",
.flags = DA9034_LED_RAMP,
},
[1] = {
.name = "littleton:keypad2",
.flags = DA9034_LED_RAMP,
},
[2] = {
.name = "littleton:vibra",
.flags = 0,
},
};
static struct da903x_subdev_info littleton_da9034_subdevs[] = {
{
.name = "da903x-led",
.id = DA9034_ID_LED_1,
.platform_data = &littleton_da9034_leds[0],
}, {
.name = "da903x-led",
.id = DA9034_ID_LED_2,
.platform_data = &littleton_da9034_leds[1],
}, {
.name = "da903x-led",
.id = DA9034_ID_VIBRA,
.platform_data = &littleton_da9034_leds[2],
}, {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
},
};
static struct da903x_platform_data littleton_da9034_info = {
.num_subdevs = ARRAY_SIZE(littleton_da9034_subdevs),
.subdevs = littleton_da9034_subdevs,
};
static struct max732x_platform_data littleton_max7320_info = {
.gpio_base = EXT0_GPIO_BASE,
};
static struct i2c_board_info littleton_i2c_info[] = {
[0] = {
.type = "da9034",
.addr = 0x34,
.platform_data = &littleton_da9034_info,
.irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
},
[1] = {
.type = "max7320",
.addr = 0x50,
.platform_data = &littleton_max7320_info,
},
};
static void __init littleton_init_i2c(void)
{
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
}
#else
static inline void littleton_init_i2c(void) {}
#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
static void __init littleton_init(void)
{
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
/*
* Note: we depend bootloader set the correct
* value to MSC register for SMC91x.
*/
platform_device_register(&smc91x_device);
littleton_init_spi();
littleton_init_i2c();
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
.phys_io = 0x40000000,
.boot_params = 0xa0000100,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
MACHINE_END
View Git Blame Copy Permalink