mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 12:14:01 +08:00
061ad5038c
Core changes:
- Simplify threaded interrupt handling: instead of passing
numbed parameters to gpiochip_irqchip_add_chained() we
create a new call: gpiochip_irqchip_add_nested() so the two
types are clearly semantically different. Also make sure
that all nested chips call gpiochip_set_nested_irqchip()
which is necessary for IRQ resend to work properly if
it happens.
- Return error on seek operations for the chardev.
- Clamp values set as part of gpio[d]_direction_output() so
that anything != 0 will be send down to the driver as "1"
not the value passed in.
- ACPI can now support naming of GPIO lines, hogs and holes
in the GPIO lists.
New drivers:
- The SX150x driver was deemed unfit for the GPIO subsystem
and was moved over to a combined GPIO+pinctrl driver in the
pinctrl subsystem.
New features:
- Various cleanups to various drivers.
-----BEGIN PGP SIGNATURE-----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=2UpT
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Luinus Walleij:
"Bulk GPIO changes for the v4.10 kernel cycle:
Core changes:
- Simplify threaded interrupt handling: instead of passing numbed
parameters to gpiochip_irqchip_add_chained() we create a new call:
gpiochip_irqchip_add_nested() so the two types are clearly
semantically different. Also make sure that all nested chips call
gpiochip_set_nested_irqchip() which is necessary for IRQ resend to
work properly if it happens.
- Return error on seek operations for the chardev.
- Clamp values set as part of gpio[d]_direction_output() so that
anything != 0 will be send down to the driver as "1" not the value
passed in.
- ACPI can now support naming of GPIO lines, hogs and holes in the
GPIO lists.
New drivers:
- The SX150x driver was deemed unfit for the GPIO subsystem and was
moved over to a combined GPIO+pinctrl driver in the pinctrl
subsystem.
New features:
- Various cleanups to various drivers"
* tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits)
gpio: merrifield: Implement gpio_get_direction callback
gpio: merrifield: Add support for hardware debouncer
gpio: chardev: Return error for seek operations
gpio: arizona: Tidy up probe error path
gpio: arizona: Remove pointless set of platform drvdata
gpio: pl061: delete platform data handling
gpio: pl061: move platform data into driver
gpio: pl061: rename variable from chip to pl061
gpio: pl061: rename state container struct
gpio: pl061: use local state for parent IRQ storage
gpio: set explicit nesting on drivers
gpio: simplify adding threaded interrupts
gpio: vf610: use builtin_platform_driver
gpio: axp209: use correct register for GPIO input status
gpio: stmpe: fix interrupt handling bug
gpio: em: depnd on ARCH_SHMOBILE
gpio: zx: depend on ARCH_ZX
gpio: x86: update config dependencies for x86 specific hardware
gpio: mb86s7x: use builtin_platform_driver
gpio: etraxfs: use builtin_platform_driver
...
145 lines
6.0 KiB
Makefile
145 lines
6.0 KiB
Makefile
# generic gpio support: platform drivers, dedicated expander chips, etc
|
|
|
|
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
|
|
|
|
obj-$(CONFIG_GPIOLIB) += devres.o
|
|
obj-$(CONFIG_GPIOLIB) += gpiolib.o
|
|
obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o
|
|
obj-$(CONFIG_GPIOLIB) += gpiolib-devprop.o
|
|
obj-$(CONFIG_OF_GPIO) += gpiolib-of.o
|
|
obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o
|
|
obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
|
|
|
|
# Device drivers. Generally keep list sorted alphabetically
|
|
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
|
|
|
|
# directly supported by gpio-generic
|
|
gpio-generic-$(CONFIG_GPIO_GENERIC) += gpio-mmio.o
|
|
|
|
obj-$(CONFIG_GPIO_104_DIO_48E) += gpio-104-dio-48e.o
|
|
obj-$(CONFIG_GPIO_104_IDIO_16) += gpio-104-idio-16.o
|
|
obj-$(CONFIG_GPIO_104_IDI_48) += gpio-104-idi-48.o
|
|
obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
|
|
obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o
|
|
obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
|
|
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
|
|
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
|
|
obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o
|
|
obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o
|
|
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
|
|
obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
|
|
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
|
|
obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
|
|
obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o
|
|
obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o
|
|
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
|
|
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
|
|
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
|
|
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
|
|
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
|
|
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
|
|
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
|
|
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
|
|
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
|
|
obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
|
|
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
|
|
obj-$(CONFIG_GPIO_EM) += gpio-em.o
|
|
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
|
|
obj-$(CONFIG_GPIO_ETRAXFS) += gpio-etraxfs.o
|
|
obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
|
|
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
|
|
obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o
|
|
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
|
|
obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o
|
|
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
|
|
obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
|
|
obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
|
|
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
|
|
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
|
|
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
|
|
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
|
|
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
|
|
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
|
|
obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
|
|
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
|
|
obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
|
|
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
|
|
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
|
|
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
|
|
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
|
|
obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o
|
|
obj-$(CONFIG_GPIO_MAX77620) += gpio-max77620.o
|
|
obj-$(CONFIG_GPIO_MB86S7X) += gpio-mb86s7x.o
|
|
obj-$(CONFIG_GPIO_MENZ127) += gpio-menz127.o
|
|
obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o
|
|
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
|
|
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
|
|
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
|
|
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
|
|
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
|
|
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
|
|
obj-$(CONFIG_GPIO_MOXART) += gpio-moxart.o
|
|
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
|
|
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
|
|
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
|
|
obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
|
|
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
|
|
obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
|
|
obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
|
|
obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
|
|
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
|
|
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
|
|
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
|
|
obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
|
|
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
|
|
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
|
|
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
|
|
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
|
|
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
|
|
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
|
|
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
|
|
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
|
|
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
|
|
obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
|
|
obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o
|
|
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
|
|
obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o
|
|
obj-$(CONFIG_GPIO_SYSCON) += gpio-syscon.o
|
|
obj-$(CONFIG_GPIO_TB10X) += gpio-tb10x.o
|
|
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
|
|
obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
|
|
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
|
|
obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
|
|
obj-$(CONFIG_GPIO_TPIC2810) += gpio-tpic2810.o
|
|
obj-$(CONFIG_GPIO_TPS65086) += gpio-tps65086.o
|
|
obj-$(CONFIG_GPIO_TPS65218) += gpio-tps65218.o
|
|
obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o
|
|
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
|
|
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
|
|
obj-$(CONFIG_GPIO_TS4800) += gpio-ts4800.o
|
|
obj-$(CONFIG_GPIO_TS4900) += gpio-ts4900.o
|
|
obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o
|
|
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
|
|
obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
|
|
obj-$(CONFIG_GPIO_TZ1090) += gpio-tz1090.o
|
|
obj-$(CONFIG_GPIO_TZ1090_PDC) += gpio-tz1090-pdc.o
|
|
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
|
|
obj-$(CONFIG_GPIO_VF610) += gpio-vf610.o
|
|
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
|
|
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
|
|
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
|
|
obj-$(CONFIG_GPIO_WHISKEY_COVE) += gpio-wcove.o
|
|
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
|
|
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
|
|
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
|
|
obj-$(CONFIG_GPIO_WS16C48) += gpio-ws16c48.o
|
|
obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o
|
|
obj-$(CONFIG_GPIO_XGENE_SB) += gpio-xgene-sb.o
|
|
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
|
|
obj-$(CONFIG_GPIO_XLP) += gpio-xlp.o
|
|
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
|
|
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
|
|
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
|
|
obj-$(CONFIG_GPIO_ZX) += gpio-zx.o
|
|
obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
|