mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
6b0b594bb8
This patch makes numerous miscellaneous code improvements to the QE library.
1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
(every caller of ucc_init_guemr() also calls ucc_set_type()). Modify all
callers of ucc_set_type() accordingly.
2. Remove the unused enum ucc_pram_initial_offset.
3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.
4. Several printk() calls were missing the terminating \n.
5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where
appropriate.
6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
with the wrong value.
7. Add the protocol type to struct us_info and updated ucc_slow_init() to
use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.
8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()
9. Add several macros in qe.h (mostly for slow UCC support, but also to
standardize some naming convention) and remove several unused macros.
10. Update ucc_geth.c to use the new macros.
11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
to use when initializing the UCC in ucc_slow_init().
12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
these are the real names of the registers.
13. Use the setbits, clrbits, and clrsetbits where appropriate.
14. Refactor ucc_set_qe_mux_rxtx().
15. Remove all instances of 'volatile'.
16. Simplify get_cmxucr_reg();
17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[].
18. Updated struct ucc_geth because struct ucc_fast is not padded any more.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
291 lines
9.5 KiB
C
291 lines
9.5 KiB
C
/*
|
|
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
|
|
*
|
|
* Authors: Shlomi Gridish <gridish@freescale.com>
|
|
* Li Yang <leoli@freescale.com>
|
|
*
|
|
* Description:
|
|
* Internal header file for UCC SLOW unit routines.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
#ifndef __UCC_SLOW_H__
|
|
#define __UCC_SLOW_H__
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <asm/immap_qe.h>
|
|
#include <asm/qe.h>
|
|
|
|
#include "ucc.h"
|
|
|
|
/* transmit BD's status */
|
|
#define T_R 0x80000000 /* ready bit */
|
|
#define T_PAD 0x40000000 /* add pads to short frames */
|
|
#define T_W 0x20000000 /* wrap bit */
|
|
#define T_I 0x10000000 /* interrupt on completion */
|
|
#define T_L 0x08000000 /* last */
|
|
|
|
#define T_A 0x04000000 /* Address - the data transmitted as address
|
|
chars */
|
|
#define T_TC 0x04000000 /* transmit CRC */
|
|
#define T_CM 0x02000000 /* continuous mode */
|
|
#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
|
|
#define T_P 0x01000000 /* Preamble - send Preamble sequence before
|
|
data */
|
|
#define T_HB 0x01000000 /* heartbeat */
|
|
#define T_NS 0x00800000 /* No Stop */
|
|
#define T_LC 0x00800000 /* late collision */
|
|
#define T_RL 0x00400000 /* retransmission limit */
|
|
#define T_UN 0x00020000 /* underrun */
|
|
#define T_CT 0x00010000 /* CTS lost */
|
|
#define T_CSL 0x00010000 /* carrier sense lost */
|
|
#define T_RC 0x003c0000 /* retry count */
|
|
|
|
/* Receive BD's status */
|
|
#define R_E 0x80000000 /* buffer empty */
|
|
#define R_W 0x20000000 /* wrap bit */
|
|
#define R_I 0x10000000 /* interrupt on reception */
|
|
#define R_L 0x08000000 /* last */
|
|
#define R_C 0x08000000 /* the last byte in this buffer is a cntl
|
|
char */
|
|
#define R_F 0x04000000 /* first */
|
|
#define R_A 0x04000000 /* the first byte in this buffer is address
|
|
byte */
|
|
#define R_CM 0x02000000 /* continuous mode */
|
|
#define R_ID 0x01000000 /* buffer close on reception of idles */
|
|
#define R_M 0x01000000 /* Frame received because of promiscuous
|
|
mode */
|
|
#define R_AM 0x00800000 /* Address match */
|
|
#define R_DE 0x00800000 /* Address match */
|
|
#define R_LG 0x00200000 /* Break received */
|
|
#define R_BR 0x00200000 /* Frame length violation */
|
|
#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
|
|
#define R_FR 0x00100000 /* Framing Error (no stop bit) character
|
|
received */
|
|
#define R_PR 0x00080000 /* Parity Error character received */
|
|
#define R_AB 0x00080000 /* Frame Aborted */
|
|
#define R_SH 0x00080000 /* frame is too short */
|
|
#define R_CR 0x00040000 /* CRC Error */
|
|
#define R_OV 0x00020000 /* Overrun */
|
|
#define R_CD 0x00010000 /* CD lost */
|
|
#define R_CL 0x00010000 /* this frame is closed because of a
|
|
collision */
|
|
|
|
/* Rx Data buffer must be 4 bytes aligned in most cases.*/
|
|
#define UCC_SLOW_RX_ALIGN 4
|
|
#define UCC_SLOW_MRBLR_ALIGNMENT 4
|
|
#define UCC_SLOW_PRAM_SIZE 0x100
|
|
#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
|
|
|
|
/* UCC Slow Channel Protocol Mode */
|
|
enum ucc_slow_channel_protocol_mode {
|
|
UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
|
|
UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
|
|
UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
|
|
};
|
|
|
|
/* UCC Slow Transparent Transmit CRC (TCRC) */
|
|
enum ucc_slow_transparent_tcrc {
|
|
/* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
|
|
UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
|
|
/* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
|
|
UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
|
|
/* 32-bit CCITT CRC (Ethernet and HDLC) */
|
|
UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
|
|
};
|
|
|
|
/* UCC Slow oversampling rate for transmitter (TDCR) */
|
|
enum ucc_slow_tx_oversampling_rate {
|
|
/* 1x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
|
|
/* 8x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
|
|
/* 16x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
|
|
/* 32x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
|
|
};
|
|
|
|
/* UCC Slow Oversampling rate for receiver (RDCR)
|
|
*/
|
|
enum ucc_slow_rx_oversampling_rate {
|
|
/* 1x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
|
|
/* 8x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
|
|
/* 16x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
|
|
/* 32x clock mode */
|
|
UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
|
|
};
|
|
|
|
/* UCC Slow Transmitter encoding method (TENC)
|
|
*/
|
|
enum ucc_slow_tx_encoding_method {
|
|
UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
|
|
UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
|
|
};
|
|
|
|
/* UCC Slow Receiver decoding method (RENC)
|
|
*/
|
|
enum ucc_slow_rx_decoding_method {
|
|
UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
|
|
UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
|
|
};
|
|
|
|
/* UCC Slow Diagnostic mode (DIAG)
|
|
*/
|
|
enum ucc_slow_diag_mode {
|
|
UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
|
|
UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
|
|
UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
|
|
UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
|
|
};
|
|
|
|
struct ucc_slow_info {
|
|
int ucc_num;
|
|
int protocol; /* QE_CR_PROTOCOL_xxx */
|
|
enum qe_clock rx_clock;
|
|
enum qe_clock tx_clock;
|
|
phys_addr_t regs;
|
|
int irq;
|
|
u16 uccm_mask;
|
|
int data_mem_part;
|
|
int init_tx;
|
|
int init_rx;
|
|
u32 tx_bd_ring_len;
|
|
u32 rx_bd_ring_len;
|
|
int rx_interrupts;
|
|
int brkpt_support;
|
|
int grant_support;
|
|
int tsa;
|
|
int cdp;
|
|
int cds;
|
|
int ctsp;
|
|
int ctss;
|
|
int rinv;
|
|
int tinv;
|
|
int rtsm;
|
|
int rfw;
|
|
int tci;
|
|
int tend;
|
|
int tfl;
|
|
int txsy;
|
|
u16 max_rx_buf_length;
|
|
enum ucc_slow_transparent_tcrc tcrc;
|
|
enum ucc_slow_channel_protocol_mode mode;
|
|
enum ucc_slow_diag_mode diag;
|
|
enum ucc_slow_tx_oversampling_rate tdcr;
|
|
enum ucc_slow_rx_oversampling_rate rdcr;
|
|
enum ucc_slow_tx_encoding_method tenc;
|
|
enum ucc_slow_rx_decoding_method renc;
|
|
};
|
|
|
|
struct ucc_slow_private {
|
|
struct ucc_slow_info *us_info;
|
|
struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
|
|
struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
|
|
u32 us_pram_offset;
|
|
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
|
|
int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
|
|
int stopped_tx; /* Whether channel has been stopped for Tx
|
|
(STOP_TX, etc.) */
|
|
int stopped_rx; /* Whether channel has been stopped for Rx */
|
|
struct list_head confQ; /* frames passed to chip waiting for tx */
|
|
u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
|
|
and length for first BD in a frame */
|
|
u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
|
|
u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
|
|
struct qe_bd *confBd; /* next BD for confirm after Tx */
|
|
struct qe_bd *tx_bd; /* next BD for new Tx request */
|
|
struct qe_bd *rx_bd; /* next BD to collect after Rx */
|
|
void *p_rx_frame; /* accumulating receive frame */
|
|
u16 *p_ucce; /* a pointer to the event register in memory.
|
|
*/
|
|
u16 *p_uccm; /* a pointer to the mask register in memory */
|
|
u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
|
|
#ifdef STATISTICS
|
|
u32 tx_frames; /* Transmitted frames counters */
|
|
u32 rx_frames; /* Received frames counters (only frames
|
|
passed to application) */
|
|
u32 rx_discarded; /* Discarded frames counters (frames that
|
|
were discarded by the driver due to
|
|
errors) */
|
|
#endif /* STATISTICS */
|
|
};
|
|
|
|
/* ucc_slow_init
|
|
* Initializes Slow UCC according to provided parameters.
|
|
*
|
|
* us_info - (In) pointer to the slow UCC info structure.
|
|
* uccs_ret - (Out) pointer to the slow UCC structure.
|
|
*/
|
|
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
|
|
|
|
/* ucc_slow_free
|
|
* Frees all resources for slow UCC.
|
|
*
|
|
* uccs - (In) pointer to the slow UCC structure.
|
|
*/
|
|
void ucc_slow_free(struct ucc_slow_private * uccs);
|
|
|
|
/* ucc_slow_enable
|
|
* Enables a fast UCC port.
|
|
* This routine enables Tx and/or Rx through the General UCC Mode Register.
|
|
*
|
|
* uccs - (In) pointer to the slow UCC structure.
|
|
* mode - (In) TX, RX, or both.
|
|
*/
|
|
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
|
|
|
|
/* ucc_slow_disable
|
|
* Disables a fast UCC port.
|
|
* This routine disables Tx and/or Rx through the General UCC Mode Register.
|
|
*
|
|
* uccs - (In) pointer to the slow UCC structure.
|
|
* mode - (In) TX, RX, or both.
|
|
*/
|
|
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
|
|
|
|
/* ucc_slow_poll_transmitter_now
|
|
* Immediately forces a poll of the transmitter for data to be sent.
|
|
* Typically, the hardware performs a periodic poll for data that the
|
|
* transmit routine has set up to be transmitted. In cases where
|
|
* this polling cycle is not soon enough, this optional routine can
|
|
* be invoked to force a poll right away, instead. Proper use for
|
|
* each transmission for which this functionality is desired is to
|
|
* call the transmit routine and then this routine right after.
|
|
*
|
|
* uccs - (In) pointer to the slow UCC structure.
|
|
*/
|
|
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
|
|
|
|
/* ucc_slow_graceful_stop_tx
|
|
* Smoothly stops transmission on a specified slow UCC.
|
|
*
|
|
* uccs - (In) pointer to the slow UCC structure.
|
|
*/
|
|
void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
|
|
|
|
/* ucc_slow_stop_tx
|
|
* Stops transmission on a specified slow UCC.
|
|
*
|
|
* uccs - (In) pointer to the slow UCC structure.
|
|
*/
|
|
void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
|
|
|
|
/* ucc_slow_restart_tx
|
|
* Restarts transmitting on a specified slow UCC.
|
|
*
|
|
* uccs - (In) pointer to the slow UCC structure.
|
|
*/
|
|
void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
|
|
|
|
u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
|
|
|
|
#endif /* __UCC_SLOW_H__ */
|