renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
5455ae4157
linux-next/arch/powerpc/kernel/vdso32/gettimeofday.S
Adhemerval Zanella fcb41a2030 powerpc: Add VDSO version of time 
On 04/18/2013 07:38 PM, Anton Blanchard wrote:
> Since you are only reading one long you shouldn't need to check the
> update count and loop, you will always see a consistent value. The
> system call version of time() just does an unprotected load for example.

Fixed.

> With the above change and with Michael's comments covered (decent
> changelog entry and Signed-off-by):
>
> Acked-by: Anton Blanchard <anton@samba.org>

Thanks for the review, below the updated patch:

From: Adhemerval Zanella <azanella@linux.vnet.ibm.com>

This patch implement the time syscall as vDSO. The performance speedups
are:

Baseline PPC32: 380 nsec
Baseline PPC64: 350 nsec
vdso PPC32:      20 nsec
vsdo PPC64:      20 nsec

Tested on 64 bit build with both 32 bit and 64 bit userland.

Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Adhemerval Zanella <azanella@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-23 16:05:05 +10:00

293 lines
6.8 KiB
ArmAsm
Raw Blame History

/*
* Userland implementation of gettimeofday() for 32 bits processes in a
* ppc64 kernel for use in the vDSO
*
* Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org,
* IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/processor.h>
#include <asm/ppc_asm.h>
#include <asm/vdso.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
/* Offset for the low 32-bit part of a field of long type */
#ifdef CONFIG_PPC64
#define LOPART 4
#define TSPEC_TV_SEC TSPC64_TV_SEC+LOPART
#else
#define LOPART 0
#define TSPEC_TV_SEC TSPC32_TV_SEC
#endif
.text
/*
* Exact prototype of gettimeofday
*
* int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz);
*
*/
V_FUNCTION_BEGIN(__kernel_gettimeofday)
.cfi_startproc
mflr r12
.cfi_register lr,r12
mr r10,r3 /* r10 saves tv */
mr r11,r4 /* r11 saves tz */
bl __get_datapage@local /* get data page */
mr r9, r3 /* datapage ptr in r9 */
cmplwi r10,0 /* check if tv is NULL */
beq 3f
lis r7,1000000@ha /* load up USEC_PER_SEC */
addi r7,r7,1000000@l /* so we get microseconds in r4 */
bl __do_get_tspec@local /* get sec/usec from tb & kernel */
stw r3,TVAL32_TV_SEC(r10)
stw r4,TVAL32_TV_USEC(r10)
3: cmplwi r11,0 /* check if tz is NULL */
beq 1f
lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */
lwz r5,CFG_TZ_DSTTIME(r9)
stw r4,TZONE_TZ_MINWEST(r11)
stw r5,TZONE_TZ_DSTTIME(r11)
1: mtlr r12
crclr cr0*4+so
li r3,0
blr
.cfi_endproc
V_FUNCTION_END(__kernel_gettimeofday)
/*
* Exact prototype of clock_gettime()
*
* int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp);
*
*/
V_FUNCTION_BEGIN(__kernel_clock_gettime)
.cfi_startproc
/* Check for supported clock IDs */
cmpli cr0,r3,CLOCK_REALTIME
cmpli cr1,r3,CLOCK_MONOTONIC
cror cr0*4+eq,cr0*4+eq,cr1*4+eq
bne cr0,99f
mflr r12 /* r12 saves lr */
.cfi_register lr,r12
mr r11,r4 /* r11 saves tp */
bl __get_datapage@local /* get data page */
mr r9,r3 /* datapage ptr in r9 */
lis r7,NSEC_PER_SEC@h /* want nanoseconds */
ori r7,r7,NSEC_PER_SEC@l
50: bl __do_get_tspec@local /* get sec/nsec from tb & kernel */
bne cr1,80f /* not monotonic -> all done */
/*
* CLOCK_MONOTONIC
*/
/* now we must fixup using wall to monotonic. We need to snapshot
* that value and do the counter trick again. Fortunately, we still
* have the counter value in r8 that was returned by __do_get_xsec.
* At this point, r3,r4 contain our sec/nsec values, r5 and r6
* can be used, r7 contains NSEC_PER_SEC.
*/
lwz r5,WTOM_CLOCK_SEC(r9)
lwz r6,WTOM_CLOCK_NSEC(r9)
/* We now have our offset in r5,r6. We create a fake dependency
* on that value and re-check the counter
*/
or r0,r6,r5
xor r0,r0,r0
add r9,r9,r0
lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
cmpl cr0,r8,r0 /* check if updated */
bne- 50b
/* Calculate and store result. Note that this mimics the C code,
* which may cause funny results if nsec goes negative... is that
* possible at all ?
*/
add r3,r3,r5
add r4,r4,r6
cmpw cr0,r4,r7
cmpwi cr1,r4,0
blt 1f
subf r4,r7,r4
addi r3,r3,1
1: bge cr1,80f
addi r3,r3,-1
add r4,r4,r7
80: stw r3,TSPC32_TV_SEC(r11)
stw r4,TSPC32_TV_NSEC(r11)
mtlr r12
crclr cr0*4+so
li r3,0
blr
/*
* syscall fallback
*/
99:
li r0,__NR_clock_gettime
sc
blr
.cfi_endproc
V_FUNCTION_END(__kernel_clock_gettime)
/*
* Exact prototype of clock_getres()
*
* int __kernel_clock_getres(clockid_t clock_id, struct timespec *res);
*
*/
V_FUNCTION_BEGIN(__kernel_clock_getres)
.cfi_startproc
/* Check for supported clock IDs */
cmpwi cr0,r3,CLOCK_REALTIME
cmpwi cr1,r3,CLOCK_MONOTONIC
cror cr0*4+eq,cr0*4+eq,cr1*4+eq
bne cr0,99f
li r3,0
cmpli cr0,r4,0
crclr cr0*4+so
beqlr
lis r5,CLOCK_REALTIME_RES@h
ori r5,r5,CLOCK_REALTIME_RES@l
stw r3,TSPC32_TV_SEC(r4)
stw r5,TSPC32_TV_NSEC(r4)
blr
/*
* syscall fallback
*/
99:
li r0,__NR_clock_getres
sc
blr
.cfi_endproc
V_FUNCTION_END(__kernel_clock_getres)
/*
* Exact prototype of time()
*
* time_t time(time *t);
*
*/
V_FUNCTION_BEGIN(__kernel_time)
.cfi_startproc
mflr r12
.cfi_register lr,r12
mr r11,r3 /* r11 holds t */
bl __get_datapage@local
mr r9, r3 /* datapage ptr in r9 */
lwz r3,STAMP_XTIME+TSPEC_TV_SEC(r9)
cmplwi r11,0 /* check if t is NULL */
beq 2f
stw r3,0(r11) /* store result at *t */
2: mtlr r12
crclr cr0*4+so
blr
.cfi_endproc
V_FUNCTION_END(__kernel_time)
/*
* This is the core of clock_gettime() and gettimeofday(),
* it returns the current time in r3 (seconds) and r4.
* On entry, r7 gives the resolution of r4, either USEC_PER_SEC
* or NSEC_PER_SEC, giving r4 in microseconds or nanoseconds.
* It expects the datapage ptr in r9 and doesn't clobber it.
* It clobbers r0, r5 and r6.
* On return, r8 contains the counter value that can be reused.
* This clobbers cr0 but not any other cr field.
*/
__do_get_tspec:
.cfi_startproc
/* Check for update count & load values. We use the low
* order 32 bits of the update count
*/
1: lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
andi. r0,r8,1 /* pending update ? loop */
bne- 1b
xor r0,r8,r8 /* create dependency */
add r9,r9,r0
/* Load orig stamp (offset to TB) */
lwz r5,CFG_TB_ORIG_STAMP(r9)
lwz r6,(CFG_TB_ORIG_STAMP+4)(r9)
/* Get a stable TB value */
2: mftbu r3
mftbl r4
mftbu r0
cmplw cr0,r3,r0
bne- 2b
/* Subtract tb orig stamp and shift left 12 bits.
*/
subfc r4,r6,r4
subfe r0,r5,r3
slwi r0,r0,12
rlwimi. r0,r4,12,20,31
slwi r4,r4,12
/*
* Load scale factor & do multiplication.
* We only use the high 32 bits of the tb_to_xs value.
* Even with a 1GHz timebase clock, the high 32 bits of
* tb_to_xs will be at least 4 million, so the error from
* ignoring the low 32 bits will be no more than 0.25ppm.
* The error will just make the clock run very very slightly
* slow until the next time the kernel updates the VDSO data,
* at which point the clock will catch up to the kernel's value,
* so there is no long-term error accumulation.
*/
lwz r5,CFG_TB_TO_XS(r9) /* load values */
mulhwu r4,r4,r5
li r3,0
beq+ 4f /* skip high part computation if 0 */
mulhwu r3,r0,r5
mullw r5,r0,r5
addc r4,r4,r5
addze r3,r3
4:
/* At this point, we have seconds since the xtime stamp
* as a 32.32 fixed-point number in r3 and r4.
* Load & add the xtime stamp.
*/
lwz r5,STAMP_XTIME+TSPEC_TV_SEC(r9)
lwz r6,STAMP_SEC_FRAC(r9)
addc r4,r4,r6
adde r3,r3,r5
/* We create a fake dependency on the result in r3/r4
* and re-check the counter
*/
or r6,r4,r3
xor r0,r6,r6
add r9,r9,r0
lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
cmplw cr0,r8,r0 /* check if updated */
bne- 1b
mulhwu r4,r4,r7 /* convert to micro or nanoseconds */
blr
.cfi_endproc
View Git Blame Copy Permalink