2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/drivers/usb/chipidea/otg.c
Loic Poulain 59739131e0 usb: chipidea: Fix otg event handler
At OTG work running time, it's possible that several events need to be
addressed (e.g. ID and VBUS events). The current implementation handles
only one event at a time which leads to ignoring the other one. Fix it.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-09-20 17:04:22 +08:00

258 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* otg.c - ChipIdea USB IP core OTG driver
*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* Author: Peter Chen
*/
/*
* This file mainly handles otgsc register, OTG fsm operations for HNP and SRP
* are also included.
*/
#include <linux/usb/otg.h>
#include <linux/usb/gadget.h>
#include <linux/usb/chipidea.h>
#include "ci.h"
#include "bits.h"
#include "otg.h"
#include "otg_fsm.h"
/**
* hw_read_otgsc returns otgsc register bits value.
* @mask: bitfield mask
*/
u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
{
struct ci_hdrc_cable *cable;
u32 val = hw_read(ci, OP_OTGSC, mask);
/*
* If using extcon framework for VBUS and/or ID signal
* detection overwrite OTGSC register value
*/
cable = &ci->platdata->vbus_extcon;
if (!IS_ERR(cable->edev)) {
if (cable->changed)
val |= OTGSC_BSVIS;
else
val &= ~OTGSC_BSVIS;
if (cable->connected)
val |= OTGSC_BSV;
else
val &= ~OTGSC_BSV;
if (cable->enabled)
val |= OTGSC_BSVIE;
else
val &= ~OTGSC_BSVIE;
}
cable = &ci->platdata->id_extcon;
if (!IS_ERR(cable->edev)) {
if (cable->changed)
val |= OTGSC_IDIS;
else
val &= ~OTGSC_IDIS;
if (cable->connected)
val &= ~OTGSC_ID; /* host */
else
val |= OTGSC_ID; /* device */
if (cable->enabled)
val |= OTGSC_IDIE;
else
val &= ~OTGSC_IDIE;
}
return val & mask;
}
/**
* hw_write_otgsc updates target bits of OTGSC register.
* @mask: bitfield mask
* @data: to be written
*/
void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
{
struct ci_hdrc_cable *cable;
cable = &ci->platdata->vbus_extcon;
if (!IS_ERR(cable->edev)) {
if (data & mask & OTGSC_BSVIS)
cable->changed = false;
/* Don't enable vbus interrupt if using external notifier */
if (data & mask & OTGSC_BSVIE) {
cable->enabled = true;
data &= ~OTGSC_BSVIE;
} else if (mask & OTGSC_BSVIE) {
cable->enabled = false;
}
}
cable = &ci->platdata->id_extcon;
if (!IS_ERR(cable->edev)) {
if (data & mask & OTGSC_IDIS)
cable->changed = false;
/* Don't enable id interrupt if using external notifier */
if (data & mask & OTGSC_IDIE) {
cable->enabled = true;
data &= ~OTGSC_IDIE;
} else if (mask & OTGSC_IDIE) {
cable->enabled = false;
}
}
hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
}
/**
* ci_otg_role - pick role based on ID pin state
* @ci: the controller
*/
enum ci_role ci_otg_role(struct ci_hdrc *ci)
{
enum ci_role role = hw_read_otgsc(ci, OTGSC_ID)
? CI_ROLE_GADGET
: CI_ROLE_HOST;
return role;
}
void ci_handle_vbus_change(struct ci_hdrc *ci)
{
if (!ci->is_otg)
return;
if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active)
usb_gadget_vbus_connect(&ci->gadget);
else if (!hw_read_otgsc(ci, OTGSC_BSV) && ci->vbus_active)
usb_gadget_vbus_disconnect(&ci->gadget);
}
/**
* When we switch to device mode, the vbus value should be lower
* than OTGSC_BSV before connecting to host.
*
* @ci: the controller
*
* This function returns an error code if timeout
*/
static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
{
unsigned long elapse = jiffies + msecs_to_jiffies(5000);
u32 mask = OTGSC_BSV;
while (hw_read_otgsc(ci, mask)) {
if (time_after(jiffies, elapse)) {
dev_err(ci->dev, "timeout waiting for %08x in OTGSC\n",
mask);
return -ETIMEDOUT;
}
msleep(20);
}
return 0;
}
static void ci_handle_id_switch(struct ci_hdrc *ci)
{
enum ci_role role = ci_otg_role(ci);
if (role != ci->role) {
dev_dbg(ci->dev, "switching from %s to %s\n",
ci_role(ci)->name, ci->roles[role]->name);
ci_role_stop(ci);
if (role == CI_ROLE_GADGET &&
IS_ERR(ci->platdata->vbus_extcon.edev))
/*
* Wait vbus lower than OTGSC_BSV before connecting
* to host. If connecting status is from an external
* connector instead of register, we don't need to
* care vbus on the board, since it will not affect
* external connector status.
*/
hw_wait_vbus_lower_bsv(ci);
ci_role_start(ci, role);
/* vbus change may have already occurred */
if (role == CI_ROLE_GADGET)
ci_handle_vbus_change(ci);
}
}
/**
* ci_otg_work - perform otg (vbus/id) event handle
* @work: work struct
*/
static void ci_otg_work(struct work_struct *work)
{
struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
if (ci_otg_is_fsm_mode(ci) && !ci_otg_fsm_work(ci)) {
enable_irq(ci->irq);
return;
}
pm_runtime_get_sync(ci->dev);
if (ci->id_event) {
ci->id_event = false;
ci_handle_id_switch(ci);
}
if (ci->b_sess_valid_event) {
ci->b_sess_valid_event = false;
ci_handle_vbus_change(ci);
}
pm_runtime_put_sync(ci->dev);
enable_irq(ci->irq);
}
/**
* ci_hdrc_otg_init - initialize otg struct
* ci: the controller
*/
int ci_hdrc_otg_init(struct ci_hdrc *ci)
{
INIT_WORK(&ci->work, ci_otg_work);
ci->wq = create_freezable_workqueue("ci_otg");
if (!ci->wq) {
dev_err(ci->dev, "can't create workqueue\n");
return -ENODEV;
}
if (ci_otg_is_fsm_mode(ci))
return ci_hdrc_otg_fsm_init(ci);
return 0;
}
/**
* ci_hdrc_otg_destroy - destroy otg struct
* ci: the controller
*/
void ci_hdrc_otg_destroy(struct ci_hdrc *ci)
{
if (ci->wq) {
flush_workqueue(ci->wq);
destroy_workqueue(ci->wq);
}
/* Disable all OTG irq and clear status */
hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
OTGSC_INT_STATUS_BITS);
if (ci_otg_is_fsm_mode(ci))
ci_hdrc_otg_fsm_remove(ci);
}