mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 15:43:59 +08:00
1fa9be72b5
For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
368 lines
8.6 KiB
C
368 lines
8.6 KiB
C
/*
|
|
* linux/arch/kernel/time-ts.c
|
|
*
|
|
* Based on arm clockevents implementation and old bfin time tick.
|
|
*
|
|
* Copyright(C) 2008, GeoTechnologies, Vitja Makarov
|
|
*
|
|
* This code is licenced under the GPL version 2. For details see
|
|
* kernel-base/COPYING.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/profile.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/time.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/cpufreq.h>
|
|
|
|
#include <asm/blackfin.h>
|
|
#include <asm/time.h>
|
|
#include <asm/gptimers.h>
|
|
|
|
#if defined(CONFIG_CYCLES_CLOCKSOURCE)
|
|
|
|
/* Accelerators for sched_clock()
|
|
* convert from cycles(64bits) => nanoseconds (64bits)
|
|
* basic equation:
|
|
* ns = cycles / (freq / ns_per_sec)
|
|
* ns = cycles * (ns_per_sec / freq)
|
|
* ns = cycles * (10^9 / (cpu_khz * 10^3))
|
|
* ns = cycles * (10^6 / cpu_khz)
|
|
*
|
|
* Then we use scaling math (suggested by george@mvista.com) to get:
|
|
* ns = cycles * (10^6 * SC / cpu_khz) / SC
|
|
* ns = cycles * cyc2ns_scale / SC
|
|
*
|
|
* And since SC is a constant power of two, we can convert the div
|
|
* into a shift.
|
|
*
|
|
* We can use khz divisor instead of mhz to keep a better precision, since
|
|
* cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
|
|
* (mathieu.desnoyers@polymtl.ca)
|
|
*
|
|
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
|
|
*/
|
|
|
|
static unsigned long cyc2ns_scale;
|
|
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
|
|
|
|
static inline void set_cyc2ns_scale(unsigned long cpu_khz)
|
|
{
|
|
cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz;
|
|
}
|
|
|
|
static inline unsigned long long cycles_2_ns(cycle_t cyc)
|
|
{
|
|
return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
|
|
}
|
|
|
|
static cycle_t bfin_read_cycles(struct clocksource *cs)
|
|
{
|
|
return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
|
|
}
|
|
|
|
static struct clocksource bfin_cs_cycles = {
|
|
.name = "bfin_cs_cycles",
|
|
.rating = 350,
|
|
.read = bfin_read_cycles,
|
|
.mask = CLOCKSOURCE_MASK(64),
|
|
.shift = 22,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
};
|
|
|
|
unsigned long long sched_clock(void)
|
|
{
|
|
return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles));
|
|
}
|
|
|
|
static int __init bfin_cs_cycles_init(void)
|
|
{
|
|
set_cyc2ns_scale(get_cclk() / 1000);
|
|
|
|
bfin_cs_cycles.mult = \
|
|
clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
|
|
|
|
if (clocksource_register(&bfin_cs_cycles))
|
|
panic("failed to register clocksource");
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
# define bfin_cs_cycles_init()
|
|
#endif
|
|
|
|
#ifdef CONFIG_GPTMR0_CLOCKSOURCE
|
|
|
|
void __init setup_gptimer0(void)
|
|
{
|
|
disable_gptimers(TIMER0bit);
|
|
|
|
set_gptimer_config(TIMER0_id, \
|
|
TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
|
|
set_gptimer_period(TIMER0_id, -1);
|
|
set_gptimer_pwidth(TIMER0_id, -2);
|
|
SSYNC();
|
|
enable_gptimers(TIMER0bit);
|
|
}
|
|
|
|
static cycle_t bfin_read_gptimer0(void)
|
|
{
|
|
return bfin_read_TIMER0_COUNTER();
|
|
}
|
|
|
|
static struct clocksource bfin_cs_gptimer0 = {
|
|
.name = "bfin_cs_gptimer0",
|
|
.rating = 400,
|
|
.read = bfin_read_gptimer0,
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
.shift = 22,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
};
|
|
|
|
static int __init bfin_cs_gptimer0_init(void)
|
|
{
|
|
setup_gptimer0();
|
|
|
|
bfin_cs_gptimer0.mult = \
|
|
clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
|
|
|
|
if (clocksource_register(&bfin_cs_gptimer0))
|
|
panic("failed to register clocksource");
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
# define bfin_cs_gptimer0_init()
|
|
#endif
|
|
|
|
#ifdef CONFIG_CORE_TIMER_IRQ_L1
|
|
__attribute__((l1_text))
|
|
#endif
|
|
irqreturn_t timer_interrupt(int irq, void *dev_id);
|
|
|
|
static int bfin_timer_set_next_event(unsigned long, \
|
|
struct clock_event_device *);
|
|
|
|
static void bfin_timer_set_mode(enum clock_event_mode, \
|
|
struct clock_event_device *);
|
|
|
|
static struct clock_event_device clockevent_bfin = {
|
|
#if defined(CONFIG_TICKSOURCE_GPTMR0)
|
|
.name = "bfin_gptimer0",
|
|
.rating = 300,
|
|
.irq = IRQ_TIMER0,
|
|
#else
|
|
.name = "bfin_core_timer",
|
|
.rating = 350,
|
|
.irq = IRQ_CORETMR,
|
|
#endif
|
|
.shift = 32,
|
|
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
|
.set_next_event = bfin_timer_set_next_event,
|
|
.set_mode = bfin_timer_set_mode,
|
|
};
|
|
|
|
static struct irqaction bfin_timer_irq = {
|
|
#if defined(CONFIG_TICKSOURCE_GPTMR0)
|
|
.name = "Blackfin GPTimer0",
|
|
#else
|
|
.name = "Blackfin CoreTimer",
|
|
#endif
|
|
.flags = IRQF_DISABLED | IRQF_TIMER | \
|
|
IRQF_IRQPOLL | IRQF_PERCPU,
|
|
.handler = timer_interrupt,
|
|
.dev_id = &clockevent_bfin,
|
|
};
|
|
|
|
#if defined(CONFIG_TICKSOURCE_GPTMR0)
|
|
static int bfin_timer_set_next_event(unsigned long cycles,
|
|
struct clock_event_device *evt)
|
|
{
|
|
disable_gptimers(TIMER0bit);
|
|
|
|
/* it starts counting three SCLK cycles after the TIMENx bit is set */
|
|
set_gptimer_pwidth(TIMER0_id, cycles - 3);
|
|
enable_gptimers(TIMER0bit);
|
|
return 0;
|
|
}
|
|
|
|
static void bfin_timer_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *evt)
|
|
{
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_PERIODIC: {
|
|
set_gptimer_config(TIMER0_id, \
|
|
TIMER_OUT_DIS | TIMER_IRQ_ENA | \
|
|
TIMER_PERIOD_CNT | TIMER_MODE_PWM);
|
|
set_gptimer_period(TIMER0_id, get_sclk() / HZ);
|
|
set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
|
|
enable_gptimers(TIMER0bit);
|
|
break;
|
|
}
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
disable_gptimers(TIMER0bit);
|
|
set_gptimer_config(TIMER0_id, \
|
|
TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
|
|
set_gptimer_period(TIMER0_id, 0);
|
|
break;
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
disable_gptimers(TIMER0bit);
|
|
break;
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void bfin_timer_ack(void)
|
|
{
|
|
set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
|
|
}
|
|
|
|
static void __init bfin_timer_init(void)
|
|
{
|
|
disable_gptimers(TIMER0bit);
|
|
}
|
|
|
|
static unsigned long __init bfin_clockevent_check(void)
|
|
{
|
|
setup_irq(IRQ_TIMER0, &bfin_timer_irq);
|
|
return get_sclk();
|
|
}
|
|
|
|
#else /* CONFIG_TICKSOURCE_CORETMR */
|
|
|
|
static int bfin_timer_set_next_event(unsigned long cycles,
|
|
struct clock_event_device *evt)
|
|
{
|
|
bfin_write_TCNTL(TMPWR);
|
|
CSYNC();
|
|
bfin_write_TCOUNT(cycles);
|
|
CSYNC();
|
|
bfin_write_TCNTL(TMPWR | TMREN);
|
|
return 0;
|
|
}
|
|
|
|
static void bfin_timer_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *evt)
|
|
{
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_PERIODIC: {
|
|
unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
|
|
bfin_write_TCNTL(TMPWR);
|
|
CSYNC();
|
|
bfin_write_TSCALE(TIME_SCALE - 1);
|
|
bfin_write_TPERIOD(tcount);
|
|
bfin_write_TCOUNT(tcount);
|
|
CSYNC();
|
|
bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
|
|
break;
|
|
}
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
bfin_write_TCNTL(TMPWR);
|
|
CSYNC();
|
|
bfin_write_TSCALE(TIME_SCALE - 1);
|
|
bfin_write_TPERIOD(0);
|
|
bfin_write_TCOUNT(0);
|
|
break;
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
bfin_write_TCNTL(0);
|
|
CSYNC();
|
|
break;
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void bfin_timer_ack(void)
|
|
{
|
|
}
|
|
|
|
static void __init bfin_timer_init(void)
|
|
{
|
|
/* power up the timer, but don't enable it just yet */
|
|
bfin_write_TCNTL(TMPWR);
|
|
CSYNC();
|
|
|
|
/*
|
|
* the TSCALE prescaler counter.
|
|
*/
|
|
bfin_write_TSCALE(TIME_SCALE - 1);
|
|
bfin_write_TPERIOD(0);
|
|
bfin_write_TCOUNT(0);
|
|
|
|
CSYNC();
|
|
}
|
|
|
|
static unsigned long __init bfin_clockevent_check(void)
|
|
{
|
|
setup_irq(IRQ_CORETMR, &bfin_timer_irq);
|
|
return get_cclk() / TIME_SCALE;
|
|
}
|
|
|
|
void __init setup_core_timer(void)
|
|
{
|
|
bfin_timer_init();
|
|
bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL);
|
|
}
|
|
#endif /* CONFIG_TICKSOURCE_GPTMR0 */
|
|
|
|
/*
|
|
* timer_interrupt() needs to keep up the real-time clock,
|
|
* as well as call the "do_timer()" routine every clocktick
|
|
*/
|
|
irqreturn_t timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
smp_mb();
|
|
evt->event_handler(evt);
|
|
bfin_timer_ack();
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __init bfin_clockevent_init(void)
|
|
{
|
|
unsigned long timer_clk;
|
|
|
|
timer_clk = bfin_clockevent_check();
|
|
|
|
bfin_timer_init();
|
|
|
|
clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
|
|
clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
|
|
clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
|
|
clockevent_bfin.cpumask = cpumask_of(0);
|
|
clockevents_register_device(&clockevent_bfin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init time_init(void)
|
|
{
|
|
time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */
|
|
|
|
#ifdef CONFIG_RTC_DRV_BFIN
|
|
/* [#2663] hack to filter junk RTC values that would cause
|
|
* userspace to have to deal with time values greater than
|
|
* 2^31 seconds (which uClibc cannot cope with yet)
|
|
*/
|
|
if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
|
|
printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
|
|
bfin_write_RTC_STAT(0);
|
|
}
|
|
#endif
|
|
|
|
/* Initialize xtime. From now on, xtime is updated with timer interrupts */
|
|
xtime.tv_sec = secs_since_1970;
|
|
xtime.tv_nsec = 0;
|
|
set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
|
|
|
|
bfin_cs_cycles_init();
|
|
bfin_cs_gptimer0_init();
|
|
bfin_clockevent_init();
|
|
}
|