mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 13:43:55 +08:00
971f115a50
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits) USB: Add support for SuperSpeed isoc endpoints xhci: Clean up cycle bit math used during stalls. xhci: Fix cycle bit calculation during stall handling. xhci: Update internal dequeue pointers after stalls. USB: Disable auto-suspend for USB 3.0 hubs. USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol. xhci: Return canceled URBs immediately when host is halted. xhci: Fixes for suspend/resume of shared HCDs. xhci: Fix re-init on power loss after resume. xhci: Make roothub functions deal with device removal. xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports. xhci: Return a USB 3.0 hub descriptor for USB3 roothub. xhci: Register second xHCI roothub. xhci: Change xhci_find_slot_id_by_port() API. xhci: Refactor bus suspend state into a struct. xhci: Index with a port array instead of PORTSC addresses. USB: Set usb_hcd->state and flags for shared roothubs. usb: Make core allocate resources per PCI-device. usb: Store bus type in usb_hcd, not in driver flags. usb: Change usb_hcd->bandwidth_mutex to a pointer. ...
602 lines
16 KiB
C
602 lines
16 KiB
C
/*
|
|
* (C) Copyright David Brownell 2000-2002
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
#include <asm/machdep.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/prom.h>
|
|
#endif
|
|
|
|
#include "usb.h"
|
|
|
|
|
|
/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
/* Coordinate handoffs between EHCI and companion controllers
|
|
* during system resume
|
|
*/
|
|
|
|
static DEFINE_MUTEX(companions_mutex);
|
|
|
|
#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI
|
|
#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI
|
|
#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI
|
|
|
|
enum companion_action {
|
|
SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS
|
|
};
|
|
|
|
static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd,
|
|
enum companion_action action)
|
|
{
|
|
struct pci_dev *companion;
|
|
struct usb_hcd *companion_hcd;
|
|
unsigned int slot = PCI_SLOT(pdev->devfn);
|
|
|
|
/* Iterate through other PCI functions in the same slot.
|
|
* If pdev is OHCI or UHCI then we are looking for EHCI, and
|
|
* vice versa.
|
|
*/
|
|
companion = NULL;
|
|
for_each_pci_dev(companion) {
|
|
if (companion->bus != pdev->bus ||
|
|
PCI_SLOT(companion->devfn) != slot)
|
|
continue;
|
|
|
|
companion_hcd = pci_get_drvdata(companion);
|
|
if (!companion_hcd)
|
|
continue;
|
|
|
|
/* For SET_HS_COMPANION, store a pointer to the EHCI bus in
|
|
* the OHCI/UHCI companion bus structure.
|
|
* For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus
|
|
* in the OHCI/UHCI companion bus structure.
|
|
* For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI
|
|
* companion controllers have fully resumed.
|
|
*/
|
|
|
|
if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) &&
|
|
companion->class == CL_EHCI) {
|
|
/* action must be SET_HS_COMPANION */
|
|
dev_dbg(&companion->dev, "HS companion for %s\n",
|
|
dev_name(&pdev->dev));
|
|
hcd->self.hs_companion = &companion_hcd->self;
|
|
|
|
} else if (pdev->class == CL_EHCI &&
|
|
(companion->class == CL_OHCI ||
|
|
companion->class == CL_UHCI)) {
|
|
switch (action) {
|
|
case SET_HS_COMPANION:
|
|
dev_dbg(&pdev->dev, "HS companion for %s\n",
|
|
dev_name(&companion->dev));
|
|
companion_hcd->self.hs_companion = &hcd->self;
|
|
break;
|
|
case CLEAR_HS_COMPANION:
|
|
companion_hcd->self.hs_companion = NULL;
|
|
break;
|
|
case WAIT_FOR_COMPANIONS:
|
|
device_pm_wait_for_dev(&pdev->dev,
|
|
&companion->dev);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd)
|
|
{
|
|
mutex_lock(&companions_mutex);
|
|
dev_set_drvdata(&pdev->dev, hcd);
|
|
companion_common(pdev, hcd, SET_HS_COMPANION);
|
|
mutex_unlock(&companions_mutex);
|
|
}
|
|
|
|
static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd)
|
|
{
|
|
mutex_lock(&companions_mutex);
|
|
dev_set_drvdata(&pdev->dev, NULL);
|
|
|
|
/* If pdev is OHCI or UHCI, just clear its hs_companion pointer */
|
|
if (pdev->class == CL_OHCI || pdev->class == CL_UHCI)
|
|
hcd->self.hs_companion = NULL;
|
|
|
|
/* Otherwise search for companion buses and clear their pointers */
|
|
else
|
|
companion_common(pdev, hcd, CLEAR_HS_COMPANION);
|
|
mutex_unlock(&companions_mutex);
|
|
}
|
|
|
|
static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd)
|
|
{
|
|
/* Only EHCI controllers need to wait.
|
|
* No locking is needed because a controller cannot be resumed
|
|
* while one of its companions is getting unbound.
|
|
*/
|
|
if (pdev->class == CL_EHCI)
|
|
companion_common(pdev, hcd, WAIT_FOR_COMPANIONS);
|
|
}
|
|
|
|
#else /* !CONFIG_PM_SLEEP */
|
|
|
|
static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {}
|
|
static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {}
|
|
static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {}
|
|
|
|
#endif /* !CONFIG_PM_SLEEP */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* configure so an HC device and id are always provided */
|
|
/* always called with process context; sleeping is OK */
|
|
|
|
/**
|
|
* usb_hcd_pci_probe - initialize PCI-based HCDs
|
|
* @dev: USB Host Controller being probed
|
|
* @id: pci hotplug id connecting controller to HCD framework
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic PCI resources for this USB host controller, and
|
|
* then invokes the start() method for the HCD associated with it
|
|
* through the hotplug entry's driver_data.
|
|
*
|
|
* Store this function in the HCD's struct pci_driver as probe().
|
|
*/
|
|
int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct hc_driver *driver;
|
|
struct usb_hcd *hcd;
|
|
int retval;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
if (!id)
|
|
return -EINVAL;
|
|
driver = (struct hc_driver *)id->driver_data;
|
|
if (!driver)
|
|
return -EINVAL;
|
|
|
|
if (pci_enable_device(dev) < 0)
|
|
return -ENODEV;
|
|
dev->current_state = PCI_D0;
|
|
|
|
if (!dev->irq) {
|
|
dev_err(&dev->dev,
|
|
"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
|
|
pci_name(dev));
|
|
retval = -ENODEV;
|
|
goto disable_pci;
|
|
}
|
|
|
|
hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
|
|
if (!hcd) {
|
|
retval = -ENOMEM;
|
|
goto disable_pci;
|
|
}
|
|
|
|
if (driver->flags & HCD_MEMORY) {
|
|
/* EHCI, OHCI */
|
|
hcd->rsrc_start = pci_resource_start(dev, 0);
|
|
hcd->rsrc_len = pci_resource_len(dev, 0);
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
|
|
driver->description)) {
|
|
dev_dbg(&dev->dev, "controller already in use\n");
|
|
retval = -EBUSY;
|
|
goto clear_companion;
|
|
}
|
|
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
|
|
if (hcd->regs == NULL) {
|
|
dev_dbg(&dev->dev, "error mapping memory\n");
|
|
retval = -EFAULT;
|
|
goto release_mem_region;
|
|
}
|
|
|
|
} else {
|
|
/* UHCI */
|
|
int region;
|
|
|
|
for (region = 0; region < PCI_ROM_RESOURCE; region++) {
|
|
if (!(pci_resource_flags(dev, region) &
|
|
IORESOURCE_IO))
|
|
continue;
|
|
|
|
hcd->rsrc_start = pci_resource_start(dev, region);
|
|
hcd->rsrc_len = pci_resource_len(dev, region);
|
|
if (request_region(hcd->rsrc_start, hcd->rsrc_len,
|
|
driver->description))
|
|
break;
|
|
}
|
|
if (region == PCI_ROM_RESOURCE) {
|
|
dev_dbg(&dev->dev, "no i/o regions available\n");
|
|
retval = -EBUSY;
|
|
goto clear_companion;
|
|
}
|
|
}
|
|
|
|
pci_set_master(dev);
|
|
|
|
retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
|
|
if (retval != 0)
|
|
goto unmap_registers;
|
|
set_hs_companion(dev, hcd);
|
|
|
|
if (pci_dev_run_wake(dev))
|
|
pm_runtime_put_noidle(&dev->dev);
|
|
return retval;
|
|
|
|
unmap_registers:
|
|
if (driver->flags & HCD_MEMORY) {
|
|
iounmap(hcd->regs);
|
|
release_mem_region:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
} else
|
|
release_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
clear_companion:
|
|
clear_hs_companion(dev, hcd);
|
|
usb_put_hcd(hcd);
|
|
disable_pci:
|
|
pci_disable_device(dev);
|
|
dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
|
|
return retval;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
|
|
|
|
|
|
/* may be called without controller electrically present */
|
|
/* may be called with controller, bus, and devices active */
|
|
|
|
/**
|
|
* usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_hcd_pci_probe(), first invoking
|
|
* the HCD's stop() method. It is always called from a thread
|
|
* context, normally "rmmod", "apmd", or something similar.
|
|
*
|
|
* Store this function in the HCD's struct pci_driver as remove().
|
|
*/
|
|
void usb_hcd_pci_remove(struct pci_dev *dev)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
|
|
hcd = pci_get_drvdata(dev);
|
|
if (!hcd)
|
|
return;
|
|
|
|
if (pci_dev_run_wake(dev))
|
|
pm_runtime_get_noresume(&dev->dev);
|
|
|
|
/* Fake an interrupt request in order to give the driver a chance
|
|
* to test whether the controller hardware has been removed (e.g.,
|
|
* cardbus physical eject).
|
|
*/
|
|
local_irq_disable();
|
|
usb_hcd_irq(0, hcd);
|
|
local_irq_enable();
|
|
|
|
usb_remove_hcd(hcd);
|
|
if (hcd->driver->flags & HCD_MEMORY) {
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
} else {
|
|
release_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
}
|
|
clear_hs_companion(dev, hcd);
|
|
usb_put_hcd(hcd);
|
|
pci_disable_device(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
|
|
|
|
/**
|
|
* usb_hcd_pci_shutdown - shutdown host controller
|
|
* @dev: USB Host Controller being shutdown
|
|
*/
|
|
void usb_hcd_pci_shutdown(struct pci_dev *dev)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
|
|
hcd = pci_get_drvdata(dev);
|
|
if (!hcd)
|
|
return;
|
|
|
|
if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
|
|
hcd->driver->shutdown) {
|
|
hcd->driver->shutdown(hcd);
|
|
pci_disable_device(dev);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
|
|
{
|
|
/* Enanble or disable ASIC clocks for USB */
|
|
if (machine_is(powermac)) {
|
|
struct device_node *of_node;
|
|
|
|
of_node = pci_device_to_OF_node(pci_dev);
|
|
if (of_node)
|
|
pmac_call_feature(PMAC_FTR_USB_ENABLE,
|
|
of_node, 0, enable);
|
|
}
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
|
|
{}
|
|
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
static int check_root_hub_suspended(struct device *dev)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
|
|
|
|
if (HCD_RH_RUNNING(hcd)) {
|
|
dev_warn(dev, "Root hub is not suspended\n");
|
|
return -EBUSY;
|
|
}
|
|
if (hcd->shared_hcd) {
|
|
hcd = hcd->shared_hcd;
|
|
if (HCD_RH_RUNNING(hcd)) {
|
|
dev_warn(dev, "Secondary root hub is not suspended\n");
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int suspend_common(struct device *dev, bool do_wakeup)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
|
|
int retval;
|
|
|
|
/* Root hub suspend should have stopped all downstream traffic,
|
|
* and all bus master traffic. And done so for both the interface
|
|
* and the stub usb_device (which we check here). But maybe it
|
|
* didn't; writing sysfs power/state files ignores such rules...
|
|
*/
|
|
retval = check_root_hub_suspended(dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
|
|
/* Optimization: Don't suspend if a root-hub wakeup is
|
|
* pending and it would cause the HCD to wake up anyway.
|
|
*/
|
|
if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
|
|
return -EBUSY;
|
|
if (do_wakeup && hcd->shared_hcd &&
|
|
HCD_WAKEUP_PENDING(hcd->shared_hcd))
|
|
return -EBUSY;
|
|
retval = hcd->driver->pci_suspend(hcd, do_wakeup);
|
|
suspend_report_result(hcd->driver->pci_suspend, retval);
|
|
|
|
/* Check again in case wakeup raced with pci_suspend */
|
|
if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
|
|
(retval == 0 && do_wakeup && hcd->shared_hcd &&
|
|
HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
|
|
if (hcd->driver->pci_resume)
|
|
hcd->driver->pci_resume(hcd, false);
|
|
retval = -EBUSY;
|
|
}
|
|
if (retval)
|
|
return retval;
|
|
}
|
|
|
|
/* If MSI-X is enabled, the driver will have synchronized all vectors
|
|
* in pci_suspend(). If MSI or legacy PCI is enabled, that will be
|
|
* synchronized here.
|
|
*/
|
|
if (!hcd->msix_enabled)
|
|
synchronize_irq(pci_dev->irq);
|
|
|
|
/* Downstream ports from this root hub should already be quiesced, so
|
|
* there will be no DMA activity. Now we can shut down the upstream
|
|
* link (except maybe for PME# resume signaling). We'll enter a
|
|
* low power state during suspend_noirq, if the hardware allows.
|
|
*/
|
|
pci_disable_device(pci_dev);
|
|
return retval;
|
|
}
|
|
|
|
static int resume_common(struct device *dev, int event)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
|
|
int retval;
|
|
|
|
if (HCD_RH_RUNNING(hcd) ||
|
|
(hcd->shared_hcd &&
|
|
HCD_RH_RUNNING(hcd->shared_hcd))) {
|
|
dev_dbg(dev, "can't resume, not suspended!\n");
|
|
return 0;
|
|
}
|
|
|
|
retval = pci_enable_device(pci_dev);
|
|
if (retval < 0) {
|
|
dev_err(dev, "can't re-enable after resume, %d!\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
pci_set_master(pci_dev);
|
|
|
|
clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
|
|
if (hcd->shared_hcd)
|
|
clear_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
|
|
|
|
if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
|
|
if (event != PM_EVENT_AUTO_RESUME)
|
|
wait_for_companions(pci_dev, hcd);
|
|
|
|
retval = hcd->driver->pci_resume(hcd,
|
|
event == PM_EVENT_RESTORE);
|
|
if (retval) {
|
|
dev_err(dev, "PCI post-resume error %d!\n", retval);
|
|
if (hcd->shared_hcd)
|
|
usb_hc_died(hcd->shared_hcd);
|
|
usb_hc_died(hcd);
|
|
}
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int hcd_pci_suspend(struct device *dev)
|
|
{
|
|
return suspend_common(dev, device_may_wakeup(dev));
|
|
}
|
|
|
|
static int hcd_pci_suspend_noirq(struct device *dev)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
|
|
int retval;
|
|
|
|
retval = check_root_hub_suspended(dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
pci_save_state(pci_dev);
|
|
|
|
/* If the root hub is dead rather than suspended, disallow remote
|
|
* wakeup. usb_hc_died() should ensure that both hosts are marked as
|
|
* dying, so we only need to check the primary roothub.
|
|
*/
|
|
if (HCD_DEAD(hcd))
|
|
device_set_wakeup_enable(dev, 0);
|
|
dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
|
|
|
|
/* Possibly enable remote wakeup,
|
|
* choose the appropriate low-power state, and go to that state.
|
|
*/
|
|
retval = pci_prepare_to_sleep(pci_dev);
|
|
if (retval == -EIO) { /* Low-power not supported */
|
|
dev_dbg(dev, "--> PCI D0 legacy\n");
|
|
retval = 0;
|
|
} else if (retval == 0) {
|
|
dev_dbg(dev, "--> PCI %s\n",
|
|
pci_power_name(pci_dev->current_state));
|
|
} else {
|
|
suspend_report_result(pci_prepare_to_sleep, retval);
|
|
return retval;
|
|
}
|
|
|
|
powermac_set_asic(pci_dev, 0);
|
|
return retval;
|
|
}
|
|
|
|
static int hcd_pci_resume_noirq(struct device *dev)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
|
|
powermac_set_asic(pci_dev, 1);
|
|
|
|
/* Go back to D0 and disable remote wakeup */
|
|
pci_back_from_sleep(pci_dev);
|
|
return 0;
|
|
}
|
|
|
|
static int hcd_pci_resume(struct device *dev)
|
|
{
|
|
return resume_common(dev, PM_EVENT_RESUME);
|
|
}
|
|
|
|
static int hcd_pci_restore(struct device *dev)
|
|
{
|
|
return resume_common(dev, PM_EVENT_RESTORE);
|
|
}
|
|
|
|
#else
|
|
|
|
#define hcd_pci_suspend NULL
|
|
#define hcd_pci_suspend_noirq NULL
|
|
#define hcd_pci_resume_noirq NULL
|
|
#define hcd_pci_resume NULL
|
|
#define hcd_pci_restore NULL
|
|
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
|
|
static int hcd_pci_runtime_suspend(struct device *dev)
|
|
{
|
|
int retval;
|
|
|
|
retval = suspend_common(dev, true);
|
|
if (retval == 0)
|
|
powermac_set_asic(to_pci_dev(dev), 0);
|
|
dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
static int hcd_pci_runtime_resume(struct device *dev)
|
|
{
|
|
int retval;
|
|
|
|
powermac_set_asic(to_pci_dev(dev), 1);
|
|
retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
|
|
dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
#else
|
|
|
|
#define hcd_pci_runtime_suspend NULL
|
|
#define hcd_pci_runtime_resume NULL
|
|
|
|
#endif /* CONFIG_PM_RUNTIME */
|
|
|
|
const struct dev_pm_ops usb_hcd_pci_pm_ops = {
|
|
.suspend = hcd_pci_suspend,
|
|
.suspend_noirq = hcd_pci_suspend_noirq,
|
|
.resume_noirq = hcd_pci_resume_noirq,
|
|
.resume = hcd_pci_resume,
|
|
.freeze = check_root_hub_suspended,
|
|
.freeze_noirq = check_root_hub_suspended,
|
|
.thaw_noirq = NULL,
|
|
.thaw = NULL,
|
|
.poweroff = hcd_pci_suspend,
|
|
.poweroff_noirq = hcd_pci_suspend_noirq,
|
|
.restore_noirq = hcd_pci_resume_noirq,
|
|
.restore = hcd_pci_restore,
|
|
.runtime_suspend = hcd_pci_runtime_suspend,
|
|
.runtime_resume = hcd_pci_runtime_resume,
|
|
};
|
|
EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
|
|
|
|
#endif /* CONFIG_PM */
|