renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
Code
50ebb7772c
linux-next/arch/arm/mach-omap2/io.c
Paul Walmsley 72e06d0872 OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 
The OMAP powerdomain code and data is all OMAP2+-specific.  This seems
unlikely to change any time soon.  Move plat-omap/include/plat/powerdomain.h
to mach-omap2/powerdomain.h.  The primary point of doing this is to remove
the temptation for unrelated upper-layer code to access powerdomain code
and data directly.

As part of this process, remove the references to powerdomain data
from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap.
Change the DSPBridge code to point to the new location for the
powerdomain headers.  The DSPBridge code should not be including the
powerdomain headers; these should be removed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-21 21:05:16 -07:00

455 lines
10 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/io.c
*
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
* Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/omapfb.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
#include "io.h"
#include <plat/omap-pm.h>
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
#ifdef CONFIG_ARCH_OMAP2
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
.length = L3_24XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_24XX_VIRT,
.pfn = __phys_to_pfn(L4_24XX_PHYS),
.length = L4_24XX_SIZE,
.type = MT_DEVICE
},
};
#ifdef CONFIG_ARCH_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
.virtual = DSP_MEM_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
.length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_IPI_2420_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
.length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_MMU_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
.length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
#endif
#ifdef CONFIG_ARCH_OMAP2430
static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
.pfn = __phys_to_pfn(L4_WK_243X_PHYS),
.length = L4_WK_243X_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
.length = OMAP243X_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
.length = OMAP243X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
.length = OMAP243X_SMS_SIZE,
.type = MT_DEVICE
},
};
#endif
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = L3_34XX_VIRT,
.pfn = __phys_to_pfn(L3_34XX_PHYS),
.length = L3_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = OMAP34XX_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
.length = OMAP343X_SMS_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
.length = OMAP343X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_PER_34XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
.length = L4_PER_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_EMU_34XX_VIRT,
.pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
#if defined(CONFIG_DEBUG_LL) && \
(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
{
.virtual = ZOOM_UART_VIRT,
.pfn = __phys_to_pfn(ZOOM_UART_BASE),
.length = SZ_1M,
.type = MT_DEVICE
},
#endif
};
#endif
#ifdef CONFIG_ARCH_OMAP4
static struct map_desc omap44xx_io_desc[] __initdata = {
{
.virtual = L3_44XX_VIRT,
.pfn = __phys_to_pfn(L3_44XX_PHYS),
.length = L3_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_44XX_VIRT,
.pfn = __phys_to_pfn(L4_44XX_PHYS),
.length = L4_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
.length = OMAP44XX_GPMC_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_EMIF1_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
.length = OMAP44XX_EMIF1_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_EMIF2_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
.length = OMAP44XX_EMIF2_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_DMM_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS),
.length = OMAP44XX_DMM_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER_44XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
.length = L4_PER_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_EMU_44XX_VIRT,
.pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
.length = L4_EMU_44XX_SIZE,
.type = MT_DEVICE,
},
};
#endif
static void __init _omap2_map_common_io(void)
{
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
*/
local_flush_tlb_all();
flush_cache_all();
omap2_check_revision();
omap_sram_init();
}
#ifdef CONFIG_ARCH_OMAP2420
void __init omap242x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
_omap2_map_common_io();
}
#endif
#ifdef CONFIG_ARCH_OMAP2430
void __init omap243x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
_omap2_map_common_io();
}
#endif
#ifdef CONFIG_ARCH_OMAP3
void __init omap34xx_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
_omap2_map_common_io();
}
#endif
#ifdef CONFIG_ARCH_OMAP4
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
_omap2_map_common_io();
}
#endif
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
* Sets the CORE DPLL3 M2 divider to the same value that it's at
* currently. This has the effect of setting the SDRC SDRAM AC timing
* registers to the values currently defined by the kernel. Currently
* only defined for OMAP3; will return 0 if called on OMAP2. Returns
* -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
* or passes along the return value of clk_set_rate().
*/
static int __init _omap2_init_reprogram_sdrc(void)
{
struct clk *dpll3_m2_ck;
int v = -EINVAL;
long rate;
if (!cpu_is_omap34xx())
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
v = clk_set_rate(dpll3_m2_ck, rate);
if (v)
pr_err("dpll3_m2_clk rate change failed: %d\n", v);
clk_put(dpll3_m2_ck);
return v;
}
static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
{
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
/*
* Initialize asm_irq_base for entry-macro.S
*/
static inline void omap_irq_base_init(void)
{
extern void __iomem *omap_irq_base;
#ifdef MULTI_OMAP2
if (cpu_is_omap24xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
else if (cpu_is_omap34xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
else if (cpu_is_omap44xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
else
pr_err("Could not initialize omap_irq_base\n");
#endif
}
void __init omap2_init_common_infrastructure(void)
{
u8 postsetup_state;
if (cpu_is_omap242x()) {
omap2xxx_powerdomains_init();
omap2_clockdomains_init();
omap2420_hwmod_init();
} else if (cpu_is_omap243x()) {
omap2xxx_powerdomains_init();
omap2_clockdomains_init();
omap2430_hwmod_init();
} else if (cpu_is_omap34xx()) {
omap3xxx_powerdomains_init();
omap2_clockdomains_init();
omap3xxx_hwmod_init();
} else if (cpu_is_omap44xx()) {
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
} else {
pr_err("Could not init hwmod data - unknown SoC\n");
}
/* Set the default postsetup state for all hwmods */
#ifdef CONFIG_PM_RUNTIME
postsetup_state = _HWMOD_STATE_IDLE;
#else
postsetup_state = _HWMOD_STATE_ENABLED;
#endif
omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
/*
* Set the default postsetup state for unusual modules (like
* MPU WDT).
*
* The postsetup_state is not actually used until
* omap_hwmod_late_init(), so boards that desire full watchdog
* coverage of kernel initialization can reprogram the
* postsetup_state between the calls to
* omap2_init_common_infra() and omap2_init_common_devices().
*
* XXX ideally we could detect whether the MPU WDT was currently
* enabled here and make this conditional
*/
postsetup_state = _HWMOD_STATE_DISABLED;
omap_hwmod_for_each_by_class("wd_timer",
_set_hwmod_postsetup_state,
&postsetup_state);
omap_pm_if_early_init();
if (cpu_is_omap2420())
omap2420_clk_init();
else if (cpu_is_omap2430())
omap2430_clk_init();
else if (cpu_is_omap34xx())
omap3xxx_clk_init();
else if (cpu_is_omap44xx())
omap4xxx_clk_init();
else
pr_err("Could not init clock framework - unknown SoC\n");
}
void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
omap_serial_early_init();
omap_hwmod_late_init();
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
gpmc_init();
omap_irq_base_init();
}
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
u8 omap_readb(u32 pa)
{
return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readb);
u16 omap_readw(u32 pa)
{
return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readw);
u32 omap_readl(u32 pa)
{
return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readl);
void omap_writeb(u8 v, u32 pa)
{
__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writeb);
void omap_writew(u16 v, u32 pa)
{
__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writew);
void omap_writel(u32 v, u32 pa)
{
__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writel);
View Git Blame Copy Permalink