mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 21:24:00 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
4244 lines
117 KiB
C
4244 lines
117 KiB
C
/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
|
|
*
|
|
* A driver for Hermes or Prism 2 chipset based PCMCIA wireless
|
|
* adaptors, with Lucent/Agere, Intersil or Symbol firmware.
|
|
*
|
|
* Current maintainers (as of 29 September 2003) are:
|
|
* Pavel Roskin <proski AT gnu.org>
|
|
* and David Gibson <hermes AT gibson.dropbear.id.au>
|
|
*
|
|
* (C) Copyright David Gibson, IBM Corporation 2001-2003.
|
|
* Copyright (C) 2000 David Gibson, Linuxcare Australia.
|
|
* With some help from :
|
|
* Copyright (C) 2001 Jean Tourrilhes, HP Labs
|
|
* Copyright (C) 2001 Benjamin Herrenschmidt
|
|
*
|
|
* Based on dummy_cs.c 1.27 2000/06/12 21:27:25
|
|
*
|
|
* Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
|
|
* AT fasta.fh-dortmund.de>
|
|
* http://www.stud.fh-dortmund.de/~andy/wvlan/
|
|
*
|
|
* The contents of this file are subject to the Mozilla Public License
|
|
* Version 1.1 (the "License"); you may not use this file except in
|
|
* compliance with the License. You may obtain a copy of the License
|
|
* at http://www.mozilla.org/MPL/
|
|
*
|
|
* Software distributed under the License is distributed on an "AS IS"
|
|
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
|
|
* the License for the specific language governing rights and
|
|
* limitations under the License.
|
|
*
|
|
* The initial developer of the original code is David A. Hinds
|
|
* <dahinds AT users.sourceforge.net>. Portions created by David
|
|
* A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
|
|
* Reserved.
|
|
*
|
|
* Alternatively, the contents of this file may be used under the
|
|
* terms of the GNU General Public License version 2 (the "GPL"), in
|
|
* which case the provisions of the GPL are applicable instead of the
|
|
* above. If you wish to allow the use of your version of this file
|
|
* only under the terms of the GPL and not to allow others to use your
|
|
* version of this file under the MPL, indicate your decision by
|
|
* deleting the provisions above and replace them with the notice and
|
|
* other provisions required by the GPL. If you do not delete the
|
|
* provisions above, a recipient may use your version of this file
|
|
* under either the MPL or the GPL. */
|
|
|
|
/*
|
|
* v0.01 -> v0.02 - 21/3/2001 - Jean II
|
|
* o Allow to use regular ethX device name instead of dldwdX
|
|
* o Warning on IBSS with ESSID=any for firmware 6.06
|
|
* o Put proper range.throughput values (optimistic)
|
|
* o IWSPY support (IOCTL and stat gather in Rx path)
|
|
* o Allow setting frequency in Ad-Hoc mode
|
|
* o Disable WEP setting if !has_wep to work on old firmware
|
|
* o Fix txpower range
|
|
* o Start adding support for Samsung/Compaq firmware
|
|
*
|
|
* v0.02 -> v0.03 - 23/3/2001 - Jean II
|
|
* o Start adding Symbol support - need to check all that
|
|
* o Fix Prism2/Symbol WEP to accept 128 bits keys
|
|
* o Add Symbol WEP (add authentication type)
|
|
* o Add Prism2/Symbol rate
|
|
* o Add PM timeout (holdover duration)
|
|
* o Enable "iwconfig eth0 key off" and friends (toggle flags)
|
|
* o Enable "iwconfig eth0 power unicast/all" (toggle flags)
|
|
* o Try with an Intel card. It report firmware 1.01, behave like
|
|
* an antiquated firmware, however on windows it says 2.00. Yuck !
|
|
* o Workaround firmware bug in allocate buffer (Intel 1.01)
|
|
* o Finish external renaming to orinoco...
|
|
* o Testing with various Wavelan firmwares
|
|
*
|
|
* v0.03 -> v0.04 - 30/3/2001 - Jean II
|
|
* o Update to Wireless 11 -> add retry limit/lifetime support
|
|
* o Tested with a D-Link DWL 650 card, fill in firmware support
|
|
* o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
|
|
* o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
|
|
* It works on D-Link *only* after a tcpdump. Weird...
|
|
* And still doesn't work on Intel card. Grrrr...
|
|
* o Update the mode after a setport3
|
|
* o Add preamble setting for Symbol cards (not yet enabled)
|
|
* o Don't complain as much about Symbol cards...
|
|
*
|
|
* v0.04 -> v0.04b - 22/4/2001 - David Gibson
|
|
* o Removed the 'eth' parameter - always use ethXX as the
|
|
* interface name instead of dldwdXX. The other was racy
|
|
* anyway.
|
|
* o Clean up RID definitions in hermes.h, other cleanups
|
|
*
|
|
* v0.04b -> v0.04c - 24/4/2001 - Jean II
|
|
* o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
|
|
* with vendor 02 and firmware 0.08. Added in the capabilities...
|
|
* o Tested Lucent firmware 7.28, everything works...
|
|
*
|
|
* v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt
|
|
* o Spin-off Pcmcia code. This file is renamed orinoco.c,
|
|
* and orinoco_cs.c now contains only the Pcmcia specific stuff
|
|
* o Add Airport driver support on top of orinoco.c (see airport.c)
|
|
*
|
|
* v0.05 -> v0.05a - 4/5/2001 - Jean II
|
|
* o Revert to old Pcmcia code to fix breakage of Ben's changes...
|
|
*
|
|
* v0.05a -> v0.05b - 4/5/2001 - Jean II
|
|
* o add module parameter 'ignore_cis_vcc' for D-Link @ 5V
|
|
* o D-Link firmware doesn't support multicast. We just print a few
|
|
* error messages, but otherwise everything works...
|
|
* o For David : set/getport3 works fine, just upgrade iwpriv...
|
|
*
|
|
* v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt
|
|
* o Adapt airport.c to latest changes in orinoco.c
|
|
* o Remove deferred power enabling code
|
|
*
|
|
* v0.05c -> v0.05d - 5/5/2001 - Jean II
|
|
* o Workaround to SNAP decapsulate frame from Linksys AP
|
|
* original patch from : Dong Liu <dliu AT research.bell-labs.com>
|
|
* (note : the memcmp bug was mine - fixed)
|
|
* o Remove set_retry stuff, no firmware support it (bloat--).
|
|
*
|
|
* v0.05d -> v0.06 - 25/5/2001 - Jean II
|
|
* Original patch from "Hong Lin" <alin AT redhat.com>,
|
|
* "Ian Kinner" <ikinner AT redhat.com>
|
|
* and "David Smith" <dsmith AT redhat.com>
|
|
* o Init of priv->tx_rate_ctrl in firmware specific section.
|
|
* o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
|
|
* o Spectrum card always need cor_reset (for every reset)
|
|
* o Fix cor_reset to not lose bit 7 in the register
|
|
* o flush_stale_links to remove zombie Pcmcia instances
|
|
* o Ack previous hermes event before reset
|
|
* Me (with my little hands)
|
|
* o Allow orinoco.c to call cor_reset via priv->card_reset_handler
|
|
* o Add priv->need_card_reset to toggle this feature
|
|
* o Fix various buglets when setting WEP in Symbol firmware
|
|
* Now, encryption is fully functional on Symbol cards. Youpi !
|
|
*
|
|
* v0.06 -> v0.06b - 25/5/2001 - Jean II
|
|
* o IBSS on Symbol use port_mode = 4. Please don't ask...
|
|
*
|
|
* v0.06b -> v0.06c - 29/5/2001 - Jean II
|
|
* o Show first spy address in /proc/net/wireless for IBSS mode as well
|
|
*
|
|
* v0.06c -> v0.06d - 6/7/2001 - David Gibson
|
|
* o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
|
|
* wishes to reduce the number of unnecessary messages.
|
|
* o Removed bogus message on CRC error.
|
|
* o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
|
|
* <willwaghorn AT yahoo.co.uk>
|
|
* o Slight cleanup/re-arrangement of firmware detection code.
|
|
*
|
|
* v0.06d -> v0.06e - 1/8/2001 - David Gibson
|
|
* o Removed some redundant global initializers (orinoco_cs.c).
|
|
* o Added some module metadata
|
|
*
|
|
* v0.06e -> v0.06f - 14/8/2001 - David Gibson
|
|
* o Wording fix to license
|
|
* o Added a 'use_alternate_encaps' module parameter for APs which need an
|
|
* oui of 00:00:00. We really need a better way of handling this, but
|
|
* the module flag is better than nothing for now.
|
|
*
|
|
* v0.06f -> v0.07 - 20/8/2001 - David Gibson
|
|
* o Removed BAP error retries from hermes_bap_seek(). For Tx we now
|
|
* let the upper layers handle the retry, we retry explicitly in the
|
|
* Rx path, but don't make as much noise about it.
|
|
* o Firmware detection cleanups.
|
|
*
|
|
* v0.07 -> v0.07a - 1/10/3001 - Jean II
|
|
* o Add code to read Symbol firmware revision, inspired by latest code
|
|
* in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
|
|
* o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
|
|
* a 3Com card with a recent firmware, fill out Symbol firmware
|
|
* capabilities of latest rev (2.20), as well as older Symbol cards.
|
|
* o Disable Power Management in newer Symbol firmware, the API
|
|
* has changed (documentation needed).
|
|
*
|
|
* v0.07a -> v0.08 - 3/10/2001 - David Gibson
|
|
* o Fixed a possible buffer overrun found by the Stanford checker (in
|
|
* dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not
|
|
* a big problem.
|
|
* o Turned has_big_wep on for Intersil cards. That's not true for all of
|
|
* them but we should at least let the capable ones try.
|
|
* o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I
|
|
* realized that my assumption that the driver's serialization
|
|
* would prevent the BAP being busy on entry was possibly false, because
|
|
* things other than seeks may make the BAP busy.
|
|
* o Use "alternate" (oui 00:00:00) encapsulation by default.
|
|
* Setting use_old_encaps will mimic the old behaviour, but I think we
|
|
* will be able to eliminate this.
|
|
* o Don't try to make __initdata const (the version string). This can't
|
|
* work because of the way the __initdata sectioning works.
|
|
* o Added MODULE_LICENSE tags.
|
|
* o Support for PLX (transparent PCMCIA->PCI bridge) cards.
|
|
* o Changed to using the new type-fascist min/max.
|
|
*
|
|
* v0.08 -> v0.08a - 9/10/2001 - David Gibson
|
|
* o Inserted some missing acknowledgements/info into the Changelog.
|
|
* o Fixed some bugs in the normalization of signal level reporting.
|
|
* o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
|
|
* which led to an instant crash on big-endian machines.
|
|
*
|
|
* v0.08a -> v0.08b - 20/11/2001 - David Gibson
|
|
* o Lots of cleanup and bugfixes in orinoco_plx.c
|
|
* o Cleanup to handling of Tx rate setting.
|
|
* o Removed support for old encapsulation method.
|
|
* o Removed old "dldwd" names.
|
|
* o Split RID constants into a new file hermes_rid.h
|
|
* o Renamed RID constants to match linux-wlan-ng and prism2.o
|
|
* o Bugfixes in hermes.c
|
|
* o Poke the PLX's INTCSR register, so it actually starts
|
|
* generating interrupts. These cards might actually work now.
|
|
* o Update to wireless extensions v12 (Jean II)
|
|
* o Support for tallies and inquire command (Jean II)
|
|
* o Airport updates for newer PPC kernels (BenH)
|
|
*
|
|
* v0.08b -> v0.09 - 21/12/2001 - David Gibson
|
|
* o Some new PCI IDs for PLX cards.
|
|
* o Removed broken attempt to do ALLMULTI reception. Just use
|
|
* promiscuous mode instead
|
|
* o Preliminary work for list-AP (Jean II)
|
|
* o Airport updates from (BenH)
|
|
* o Eliminated racy hw_ready stuff
|
|
* o Fixed generation of fake events in irq handler. This should
|
|
* finally kill the EIO problems (Jean II & dgibson)
|
|
* o Fixed breakage of bitrate set/get on Agere firmware (Jean II)
|
|
*
|
|
* v0.09 -> v0.09a - 2/1/2002 - David Gibson
|
|
* o Fixed stupid mistake in multicast list handling, triggering
|
|
* a BUG()
|
|
*
|
|
* v0.09a -> v0.09b - 16/1/2002 - David Gibson
|
|
* o Fixed even stupider mistake in new interrupt handling, which
|
|
* seriously broke things on big-endian machines.
|
|
* o Removed a bunch of redundant includes and exports.
|
|
* o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c
|
|
* o Don't attempt to do hardware level multicast reception on
|
|
* Intersil firmware, just go promisc instead.
|
|
* o Typo fixed in hermes_issue_cmd()
|
|
* o Eliminated WIRELESS_SPY #ifdefs
|
|
* o Status code reported on Tx exceptions
|
|
* o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC
|
|
* interrupts, which should fix the timeouts we're seeing.
|
|
*
|
|
* v0.09b -> v0.10 - 25 Feb 2002 - David Gibson
|
|
* o Removed nested structures used for header parsing, so the
|
|
* driver should now work without hackery on ARM
|
|
* o Fix for WEP handling on Intersil (Hawk Newton)
|
|
* o Eliminated the /proc/hermes/ethXX/regs debugging file. It
|
|
* was never very useful.
|
|
* o Make Rx errors less noisy.
|
|
*
|
|
* v0.10 -> v0.11 - 5 Apr 2002 - David Gibson
|
|
* o Laid the groundwork in hermes.[ch] for devices which map
|
|
* into PCI memory space rather than IO space.
|
|
* o Fixed bug in multicast handling (cleared multicast list when
|
|
* leaving promiscuous mode).
|
|
* o Relegated Tx error messages to debug.
|
|
* o Cleaned up / corrected handling of allocation lengths.
|
|
* o Set OWNSSID in IBSS mode for WinXP interoperability (jimc).
|
|
* o Change to using alloc_etherdev() for structure allocations.
|
|
* o Check for and drop undersized packets.
|
|
* o Fixed a race in stopping/waking the queue. This should fix
|
|
* the timeout problems (Pavel Roskin)
|
|
* o Reverted to netif_wake_queue() on the ALLOC event.
|
|
* o Fixes for recent Symbol firmwares which lack AP density
|
|
* (Pavel Roskin).
|
|
*
|
|
* v0.11 -> v0.11a - 29 Apr 2002 - David Gibson
|
|
* o Handle different register spacing, necessary for Prism 2.5
|
|
* PCI adaptors (Steve Hill).
|
|
* o Cleaned up initialization of card structures in orinoco_cs
|
|
* and airport. Removed card->priv field.
|
|
* o Make response structure optional for hermes_docmd_wait()
|
|
* Pavel Roskin)
|
|
* o Added PCI id for Nortel emobility to orinoco_plx.c.
|
|
* o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin)
|
|
* o Cleanups to firmware capability detection.
|
|
* o Arrange for orinoco_pci.c to override firmware detection.
|
|
* We should be able to support the PCI Intersil cards now.
|
|
* o Cleanup handling of reset_cor and hard_reset (Pavel Roskin).
|
|
* o Remove erroneous use of USER_BAP in the TxExc handler (Jouni
|
|
* Malinen).
|
|
* o Makefile changes for better integration into David Hinds
|
|
* pcmcia-cs package.
|
|
*
|
|
* v0.11a -> v0.11b - 1 May 2002 - David Gibson
|
|
* o Better error reporting in orinoco_plx_init_one()
|
|
* o Fixed multiple bad kfree() bugs introduced by the
|
|
* alloc_orinocodev() changes.
|
|
*
|
|
* v0.11b -> v0.12 - 19 Jun 2002 - David Gibson
|
|
* o Support changing the MAC address.
|
|
* o Correct display of Intersil firmware revision numbers.
|
|
* o Entirely revised locking scheme. Should be both simpler and
|
|
* better.
|
|
* o Merged some common code in orinoco_plx, orinoco_pci and
|
|
* airport by creating orinoco_default_{open,stop,reset}()
|
|
* which are used as the dev->open, dev->stop, priv->reset
|
|
* callbacks if none are specified when alloc_orinocodev() is
|
|
* called.
|
|
* o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
|
|
* They didn't do anything.
|
|
*
|
|
* v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
|
|
* o Some rearrangement of code.
|
|
* o Numerous fixups to locking and rest handling, particularly
|
|
* for PCMCIA.
|
|
* o This allows open and stop net_device methods to be in
|
|
* orinoco.c now, rather than in the init modules.
|
|
* o In orinoco_cs.c link->priv now points to the struct
|
|
* net_device not to the struct orinoco_private.
|
|
* o Added a check for undersized SNAP frames, which could cause
|
|
* crashes.
|
|
*
|
|
* v0.12a -> v0.12b - 11 Jul 2002 - David Gibson
|
|
* o Fix hw->num_init testing code, so num_init is actually
|
|
* incremented.
|
|
* o Fix very stupid bug in orinoco_cs which broke compile with
|
|
* CONFIG_SMP.
|
|
* o Squashed a warning.
|
|
*
|
|
* v0.12b -> v0.12c - 26 Jul 2002 - David Gibson
|
|
* o Change to C9X style designated initializers.
|
|
* o Add support for 3Com AirConnect PCI.
|
|
* o No longer ignore the hard_reset argument to
|
|
* alloc_orinocodev(). Oops.
|
|
*
|
|
* v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson
|
|
* o Revert the broken 0.12* locking scheme and go to a new yet
|
|
* simpler scheme.
|
|
* o Do firmware resets only in orinoco_init() and when waking
|
|
* the card from hard sleep.
|
|
*
|
|
* v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson
|
|
* o Re-introduced full resets (via schedule_task()) on Tx
|
|
* timeout.
|
|
*
|
|
* v0.13 -> v0.13a - 30 Sep 2002 - David Gibson
|
|
* o Minor cleanups to info frame handling. Add basic support
|
|
* for linkstatus info frames.
|
|
* o Include required kernel headers in orinoco.h, to avoid
|
|
* compile problems.
|
|
*
|
|
* v0.13a -> v0.13b - 10 Feb 2003 - David Gibson
|
|
* o Implemented hard reset for Airport cards
|
|
* o Experimental suspend/resume implementation for orinoco_pci
|
|
* o Abolished /proc debugging support, replaced with a debugging
|
|
* iwpriv. Now it's ugly and simple instead of ugly and complex.
|
|
* o Bugfix in hermes.c if the firmware returned a record length
|
|
* of 0, we could go clobbering memory.
|
|
* o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
|
|
* was set, which was usually true on PCMCIA hot removes.
|
|
* o Track LINKSTATUS messages, silently drop Tx packets before
|
|
* we are connected (avoids confusing the firmware), and only
|
|
* give LINKSTATUS printk()s if the status has changed.
|
|
*
|
|
* v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
|
|
* o Cleanup: use dev instead of priv in various places.
|
|
* o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event
|
|
* if we're in the middle of a (driver initiated) hard reset.
|
|
* o Bug fix: ETH_ZLEN is supposed to include the header
|
|
* (Dionysus Blazakis & Manish Karir)
|
|
* o Convert to using workqueues instead of taskqueues (and
|
|
* backwards compatibility macros for pre 2.5.41 kernels).
|
|
* o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in
|
|
* airport.c
|
|
* o New orinoco_tmd.c init module from Joerg Dorchain for
|
|
* TMD7160 based PCI to PCMCIA bridges (similar to
|
|
* orinoco_plx.c).
|
|
*
|
|
* v0.13c -> v0.13d - 22 Apr 2003 - David Gibson
|
|
* o Make hw_unavailable a counter, rather than just a flag, this
|
|
* is necessary to avoid some races (such as a card being
|
|
* removed in the middle of orinoco_reset().
|
|
* o Restore Release/RequestConfiguration in the PCMCIA event handler
|
|
* when dealing with a driver initiated hard reset. This is
|
|
* necessary to prevent hangs due to a spurious interrupt while
|
|
* the reset is in progress.
|
|
* o Clear the 802.11 header when transmitting, even though we
|
|
* don't use it. This fixes a long standing bug on some
|
|
* firmwares, which seem to get confused if that isn't done.
|
|
* o Be less eager to de-encapsulate SNAP frames, only do so if
|
|
* the OUI is 00:00:00 or 00:00:f8, leave others alone. The old
|
|
* behaviour broke CDP (Cisco Discovery Protocol).
|
|
* o Use dev instead of priv for free_irq() as well as
|
|
* request_irq() (oops).
|
|
* o Attempt to reset rather than giving up if we get too many
|
|
* IRQs.
|
|
* o Changed semantics of __orinoco_down() so it can be called
|
|
* safely with hw_unavailable set. It also now clears the
|
|
* linkstatus (since we're going to have to reassociate).
|
|
*
|
|
* v0.13d -> v0.13e - 12 May 2003 - David Gibson
|
|
* o Support for post-2.5.68 return values from irq handler.
|
|
* o Fixed bug where underlength packets would be double counted
|
|
* in the rx_dropped statistics.
|
|
* o Provided a module parameter to suppress linkstatus messages.
|
|
*
|
|
* v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson
|
|
* o Replaced priv->connected logic with netif_carrier_on/off()
|
|
* calls.
|
|
* o Remove has_ibss_any and never set the CREATEIBSS RID when
|
|
* the ESSID is empty. Too many firmwares break if we do.
|
|
* o 2.6 merges: Replace pdev->slot_name with pci_name(), remove
|
|
* __devinitdata from PCI ID tables, use free_netdev().
|
|
* o Enabled shared-key authentication for Agere firmware (from
|
|
* Robert J. Moore <Robert.J.Moore AT allanbank.com>
|
|
* o Move netif_wake_queue() (back) to the Tx completion from the
|
|
* ALLOC event. This seems to prevent/mitigate the rolling
|
|
* error -110 problems at least on some Intersil firmwares.
|
|
* Theoretically reduces performance, but I can't measure it.
|
|
* Patch from Andrew Tridgell <tridge AT samba.org>
|
|
*
|
|
* v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson
|
|
* o Correctly turn off shared-key authentication when requested
|
|
* (bugfix from Robert J. Moore).
|
|
* o Correct airport sleep interfaces for current 2.6 kernels.
|
|
* o Add code for key change without disabling/enabling the MAC
|
|
* port. This is supposed to allow 802.1x to work sanely, but
|
|
* doesn't seem to yet.
|
|
*
|
|
* TODO
|
|
* o New wireless extensions API (patch from Moustafa
|
|
* Youssef, updated by Jim Carter and Pavel Roskin).
|
|
* o Handle de-encapsulation within network layer, provide 802.11
|
|
* headers (patch from Thomas 'Dent' Mirlacher)
|
|
* o RF monitor mode support
|
|
* o Fix possible races in SPY handling.
|
|
* o Disconnect wireless extensions from fundamental configuration.
|
|
* o (maybe) Software WEP support (patch from Stano Meduna).
|
|
* o (maybe) Use multiple Tx buffers - driver handling queue
|
|
* rather than firmware.
|
|
*/
|
|
|
|
/* Locking and synchronization:
|
|
*
|
|
* The basic principle is that everything is serialized through a
|
|
* single spinlock, priv->lock. The lock is used in user, bh and irq
|
|
* context, so when taken outside hardirq context it should always be
|
|
* taken with interrupts disabled. The lock protects both the
|
|
* hardware and the struct orinoco_private.
|
|
*
|
|
* Another flag, priv->hw_unavailable indicates that the hardware is
|
|
* unavailable for an extended period of time (e.g. suspended, or in
|
|
* the middle of a hard reset). This flag is protected by the
|
|
* spinlock. All code which touches the hardware should check the
|
|
* flag after taking the lock, and if it is set, give up on whatever
|
|
* they are doing and drop the lock again. The orinoco_lock()
|
|
* function handles this (it unlocks and returns -EBUSY if
|
|
* hw_unavailable is non-zero).
|
|
*/
|
|
|
|
#define DRIVER_NAME "orinoco"
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/wireless.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "hermes.h"
|
|
#include "hermes_rid.h"
|
|
#include "orinoco.h"
|
|
#include "ieee802_11.h"
|
|
|
|
/********************************************************************/
|
|
/* Module information */
|
|
/********************************************************************/
|
|
|
|
MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
|
|
MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
|
|
MODULE_LICENSE("Dual MPL/GPL");
|
|
|
|
/* Level of debugging. Used in the macros in orinoco.h */
|
|
#ifdef ORINOCO_DEBUG
|
|
int orinoco_debug = ORINOCO_DEBUG;
|
|
module_param(orinoco_debug, int, 0644);
|
|
MODULE_PARM_DESC(orinoco_debug, "Debug level");
|
|
EXPORT_SYMBOL(orinoco_debug);
|
|
#endif
|
|
|
|
static int suppress_linkstatus; /* = 0 */
|
|
module_param(suppress_linkstatus, bool, 0644);
|
|
MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
|
|
|
|
/********************************************************************/
|
|
/* Compile time configuration and compatibility stuff */
|
|
/********************************************************************/
|
|
|
|
/* We do this this way to avoid ifdefs in the actual code */
|
|
#ifdef WIRELESS_SPY
|
|
#define SPY_NUMBER(priv) (priv->spy_number)
|
|
#else
|
|
#define SPY_NUMBER(priv) 0
|
|
#endif /* WIRELESS_SPY */
|
|
|
|
/********************************************************************/
|
|
/* Internal constants */
|
|
/********************************************************************/
|
|
|
|
#define ORINOCO_MIN_MTU 256
|
|
#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD)
|
|
|
|
#define SYMBOL_MAX_VER_LEN (14)
|
|
#define USER_BAP 0
|
|
#define IRQ_BAP 1
|
|
#define MAX_IRQLOOPS_PER_IRQ 10
|
|
#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
|
|
* how many events the
|
|
* device could
|
|
* legitimately generate */
|
|
#define SMALL_KEY_SIZE 5
|
|
#define LARGE_KEY_SIZE 13
|
|
#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */
|
|
|
|
#define DUMMY_FID 0xFFFF
|
|
|
|
/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
|
|
HERMES_MAX_MULTICAST : 0)*/
|
|
#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
|
|
|
|
#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
|
|
| HERMES_EV_TX | HERMES_EV_TXEXC \
|
|
| HERMES_EV_WTERR | HERMES_EV_INFO \
|
|
| HERMES_EV_INFDROP )
|
|
|
|
/********************************************************************/
|
|
/* Data tables */
|
|
/********************************************************************/
|
|
|
|
/* The frequency of each channel in MHz */
|
|
static const long channel_frequency[] = {
|
|
2412, 2417, 2422, 2427, 2432, 2437, 2442,
|
|
2447, 2452, 2457, 2462, 2467, 2472, 2484
|
|
};
|
|
#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
|
|
|
|
/* This tables gives the actual meanings of the bitrate IDs returned
|
|
* by the firmware. */
|
|
static struct {
|
|
int bitrate; /* in 100s of kilobits */
|
|
int automatic;
|
|
u16 agere_txratectrl;
|
|
u16 intersil_txratectrl;
|
|
} bitrate_table[] = {
|
|
{110, 1, 3, 15}, /* Entry 0 is the default */
|
|
{10, 0, 1, 1},
|
|
{10, 1, 1, 1},
|
|
{20, 0, 2, 2},
|
|
{20, 1, 6, 3},
|
|
{55, 0, 4, 4},
|
|
{55, 1, 7, 7},
|
|
{110, 0, 5, 8},
|
|
};
|
|
#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
|
|
|
|
/********************************************************************/
|
|
/* Data types */
|
|
/********************************************************************/
|
|
|
|
struct header_struct {
|
|
/* 802.3 */
|
|
u8 dest[ETH_ALEN];
|
|
u8 src[ETH_ALEN];
|
|
u16 len;
|
|
/* 802.2 */
|
|
u8 dsap;
|
|
u8 ssap;
|
|
u8 ctrl;
|
|
/* SNAP */
|
|
u8 oui[3];
|
|
u16 ethertype;
|
|
} __attribute__ ((packed));
|
|
|
|
/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
|
|
u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
|
|
|
|
#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
|
|
|
|
struct hermes_rx_descriptor {
|
|
u16 status;
|
|
u32 time;
|
|
u8 silence;
|
|
u8 signal;
|
|
u8 rate;
|
|
u8 rxflow;
|
|
u32 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
/********************************************************************/
|
|
/* Function prototypes */
|
|
/********************************************************************/
|
|
|
|
static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static int __orinoco_program_rids(struct net_device *dev);
|
|
static void __orinoco_set_multicast_list(struct net_device *dev);
|
|
static int orinoco_debug_dump_recs(struct net_device *dev);
|
|
|
|
/********************************************************************/
|
|
/* Internal helper functions */
|
|
/********************************************************************/
|
|
|
|
static inline void set_port_type(struct orinoco_private *priv)
|
|
{
|
|
switch (priv->iw_mode) {
|
|
case IW_MODE_INFRA:
|
|
priv->port_type = 1;
|
|
priv->createibss = 0;
|
|
break;
|
|
case IW_MODE_ADHOC:
|
|
if (priv->prefer_port3) {
|
|
priv->port_type = 3;
|
|
priv->createibss = 0;
|
|
} else {
|
|
priv->port_type = priv->ibss_port;
|
|
priv->createibss = 1;
|
|
}
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
|
|
priv->ndev->name);
|
|
}
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Device methods */
|
|
/********************************************************************/
|
|
|
|
static int orinoco_open(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
err = __orinoco_up(dev);
|
|
|
|
if (! err)
|
|
priv->open = 1;
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
int orinoco_stop(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int err = 0;
|
|
|
|
/* We mustn't use orinoco_lock() here, because we need to be
|
|
able to close the interface even if hw_unavailable is set
|
|
(e.g. as we're released after a PC Card removal) */
|
|
spin_lock_irq(&priv->lock);
|
|
|
|
priv->open = 0;
|
|
|
|
err = __orinoco_down(dev);
|
|
|
|
spin_unlock_irq(&priv->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
|
|
return &priv->stats;
|
|
}
|
|
|
|
static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
struct iw_statistics *wstats = &priv->wstats;
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
if (! netif_device_present(dev)) {
|
|
printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
|
|
dev->name);
|
|
return NULL; /* FIXME: Can we do better than this? */
|
|
}
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return NULL; /* FIXME: Erg, we've been signalled, how
|
|
* do we propagate this back up? */
|
|
|
|
if (priv->iw_mode == IW_MODE_ADHOC) {
|
|
memset(&wstats->qual, 0, sizeof(wstats->qual));
|
|
/* If a spy address is defined, we report stats of the
|
|
* first spy address - Jean II */
|
|
if (SPY_NUMBER(priv)) {
|
|
wstats->qual.qual = priv->spy_stat[0].qual;
|
|
wstats->qual.level = priv->spy_stat[0].level;
|
|
wstats->qual.noise = priv->spy_stat[0].noise;
|
|
wstats->qual.updated = priv->spy_stat[0].updated;
|
|
}
|
|
} else {
|
|
struct {
|
|
u16 qual, signal, noise;
|
|
} __attribute__ ((packed)) cq;
|
|
|
|
err = HERMES_READ_RECORD(hw, USER_BAP,
|
|
HERMES_RID_COMMSQUALITY, &cq);
|
|
|
|
wstats->qual.qual = (int)le16_to_cpu(cq.qual);
|
|
wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
|
|
wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
|
|
wstats->qual.updated = 7;
|
|
}
|
|
|
|
/* We can't really wait for the tallies inquiry command to
|
|
* complete, so we just use the previous results and trigger
|
|
* a new tallies inquiry command for next time - Jean II */
|
|
/* FIXME: We're in user context (I think?), so we should just
|
|
wait for the tallies to come through */
|
|
err = hermes_inquire(hw, HERMES_INQ_TALLIES);
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
if (err)
|
|
return NULL;
|
|
|
|
return wstats;
|
|
}
|
|
|
|
static void orinoco_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0) {
|
|
printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
|
|
"called when hw_unavailable\n", dev->name);
|
|
return;
|
|
}
|
|
|
|
__orinoco_set_multicast_list(dev);
|
|
orinoco_unlock(priv, &flags);
|
|
}
|
|
|
|
static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
|
|
if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
|
|
return -EINVAL;
|
|
|
|
if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
|
|
(priv->nicbuf_size - ETH_HLEN) )
|
|
return -EINVAL;
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Tx path */
|
|
/********************************************************************/
|
|
|
|
static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &priv->stats;
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
u16 txfid = priv->txfid;
|
|
char *p;
|
|
struct ethhdr *eh;
|
|
int len, data_len, data_off;
|
|
struct hermes_tx_descriptor desc;
|
|
unsigned long flags;
|
|
|
|
TRACE_ENTER(dev->name);
|
|
|
|
if (! netif_running(dev)) {
|
|
printk(KERN_ERR "%s: Tx on stopped device!\n",
|
|
dev->name);
|
|
TRACE_EXIT(dev->name);
|
|
return 1;
|
|
}
|
|
|
|
if (netif_queue_stopped(dev)) {
|
|
printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
|
|
dev->name);
|
|
TRACE_EXIT(dev->name);
|
|
return 1;
|
|
}
|
|
|
|
if (orinoco_lock(priv, &flags) != 0) {
|
|
printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
|
|
dev->name);
|
|
TRACE_EXIT(dev->name);
|
|
return 1;
|
|
}
|
|
|
|
if (! netif_carrier_ok(dev)) {
|
|
/* Oops, the firmware hasn't established a connection,
|
|
silently drop the packet (this seems to be the
|
|
safest approach). */
|
|
stats->tx_errors++;
|
|
orinoco_unlock(priv, &flags);
|
|
dev_kfree_skb(skb);
|
|
TRACE_EXIT(dev->name);
|
|
return 0;
|
|
}
|
|
|
|
/* Length of the packet body */
|
|
/* FIXME: what if the skb is smaller than this? */
|
|
len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
|
|
|
|
eh = (struct ethhdr *)skb->data;
|
|
|
|
memset(&desc, 0, sizeof(desc));
|
|
desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
|
|
err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
|
|
if (err) {
|
|
if (net_ratelimit())
|
|
printk(KERN_ERR "%s: Error %d writing Tx descriptor "
|
|
"to BAP\n", dev->name, err);
|
|
stats->tx_errors++;
|
|
goto fail;
|
|
}
|
|
|
|
/* Clear the 802.11 header and data length fields - some
|
|
* firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
|
|
* if this isn't done. */
|
|
hermes_clear_words(hw, HERMES_DATA0,
|
|
HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
|
|
|
|
/* Encapsulate Ethernet-II frames */
|
|
if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
|
|
struct header_struct hdr;
|
|
data_len = len;
|
|
data_off = HERMES_802_3_OFFSET + sizeof(hdr);
|
|
p = skb->data + ETH_HLEN;
|
|
|
|
/* 802.3 header */
|
|
memcpy(hdr.dest, eh->h_dest, ETH_ALEN);
|
|
memcpy(hdr.src, eh->h_source, ETH_ALEN);
|
|
hdr.len = htons(data_len + ENCAPS_OVERHEAD);
|
|
|
|
/* 802.2 header */
|
|
memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr));
|
|
|
|
hdr.ethertype = eh->h_proto;
|
|
err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
|
|
txfid, HERMES_802_3_OFFSET);
|
|
if (err) {
|
|
if (net_ratelimit())
|
|
printk(KERN_ERR "%s: Error %d writing packet "
|
|
"header to BAP\n", dev->name, err);
|
|
stats->tx_errors++;
|
|
goto fail;
|
|
}
|
|
} else { /* IEEE 802.3 frame */
|
|
data_len = len + ETH_HLEN;
|
|
data_off = HERMES_802_3_OFFSET;
|
|
p = skb->data;
|
|
}
|
|
|
|
/* Round up for odd length packets */
|
|
err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2),
|
|
txfid, data_off);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
|
|
dev->name, err);
|
|
stats->tx_errors++;
|
|
goto fail;
|
|
}
|
|
|
|
/* Finally, we actually initiate the send */
|
|
netif_stop_queue(dev);
|
|
|
|
err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
|
|
txfid, NULL);
|
|
if (err) {
|
|
netif_start_queue(dev);
|
|
printk(KERN_ERR "%s: Error %d transmitting packet\n",
|
|
dev->name, err);
|
|
stats->tx_errors++;
|
|
goto fail;
|
|
}
|
|
|
|
dev->trans_start = jiffies;
|
|
stats->tx_bytes += data_off + data_len;
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
TRACE_EXIT(dev->name);
|
|
|
|
return 0;
|
|
fail:
|
|
TRACE_EXIT(dev->name);
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
return err;
|
|
}
|
|
|
|
static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
u16 fid = hermes_read_regn(hw, ALLOCFID);
|
|
|
|
if (fid != priv->txfid) {
|
|
if (fid != DUMMY_FID)
|
|
printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
|
|
dev->name, fid);
|
|
return;
|
|
}
|
|
|
|
hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
|
|
}
|
|
|
|
static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &priv->stats;
|
|
|
|
stats->tx_packets++;
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
|
|
}
|
|
|
|
static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &priv->stats;
|
|
u16 fid = hermes_read_regn(hw, TXCOMPLFID);
|
|
struct hermes_tx_descriptor desc;
|
|
int err = 0;
|
|
|
|
if (fid == DUMMY_FID)
|
|
return; /* Nothing's really happened */
|
|
|
|
err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
|
|
if (err) {
|
|
printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
|
|
"(FID=%04X error %d)\n",
|
|
dev->name, fid, err);
|
|
} else {
|
|
DEBUG(1, "%s: Tx error, status %d\n",
|
|
dev->name, le16_to_cpu(desc.status));
|
|
}
|
|
|
|
stats->tx_errors++;
|
|
|
|
netif_wake_queue(dev);
|
|
hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
|
|
}
|
|
|
|
static void orinoco_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &priv->stats;
|
|
struct hermes *hw = &priv->hw;
|
|
|
|
printk(KERN_WARNING "%s: Tx timeout! "
|
|
"ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
|
|
dev->name, hermes_read_regn(hw, ALLOCFID),
|
|
hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
|
|
|
|
stats->tx_errors++;
|
|
|
|
schedule_work(&priv->reset_work);
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Rx path (data frames) */
|
|
/********************************************************************/
|
|
|
|
/* Does the frame have a SNAP header indicating it should be
|
|
* de-encapsulated to Ethernet-II? */
|
|
static inline int is_ethersnap(void *_hdr)
|
|
{
|
|
u8 *hdr = _hdr;
|
|
|
|
/* We de-encapsulate all packets which, a) have SNAP headers
|
|
* (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
|
|
* and where b) the OUI of the SNAP header is 00:00:00 or
|
|
* 00:00:f8 - we need both because different APs appear to use
|
|
* different OUIs for some reason */
|
|
return (memcmp(hdr, &encaps_hdr, 5) == 0)
|
|
&& ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
|
|
}
|
|
|
|
static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
|
|
int level, int noise)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int i;
|
|
|
|
/* Gather wireless spy statistics: for each packet, compare the
|
|
* source address with out list, and if match, get the stats... */
|
|
for (i = 0; i < priv->spy_number; i++)
|
|
if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
|
|
priv->spy_stat[i].level = level - 0x95;
|
|
priv->spy_stat[i].noise = noise - 0x95;
|
|
priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
|
|
priv->spy_stat[i].updated = 7;
|
|
}
|
|
}
|
|
|
|
static void orinoco_stat_gather(struct net_device *dev,
|
|
struct sk_buff *skb,
|
|
struct hermes_rx_descriptor *desc)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
|
|
/* Using spy support with lots of Rx packets, like in an
|
|
* infrastructure (AP), will really slow down everything, because
|
|
* the MAC address must be compared to each entry of the spy list.
|
|
* If the user really asks for it (set some address in the
|
|
* spy list), we do it, but he will pay the price.
|
|
* Note that to get here, you need both WIRELESS_SPY
|
|
* compiled in AND some addresses in the list !!!
|
|
*/
|
|
/* Note : gcc will optimise the whole section away if
|
|
* WIRELESS_SPY is not defined... - Jean II */
|
|
if (SPY_NUMBER(priv)) {
|
|
orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN,
|
|
desc->signal, desc->silence);
|
|
}
|
|
}
|
|
|
|
static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &priv->stats;
|
|
struct iw_statistics *wstats = &priv->wstats;
|
|
struct sk_buff *skb = NULL;
|
|
u16 rxfid, status;
|
|
int length, data_len, data_off;
|
|
char *p;
|
|
struct hermes_rx_descriptor desc;
|
|
struct header_struct hdr;
|
|
struct ethhdr *eh;
|
|
int err;
|
|
|
|
rxfid = hermes_read_regn(hw, RXFID);
|
|
|
|
err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
|
|
rxfid, 0);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: error %d reading Rx descriptor. "
|
|
"Frame dropped.\n", dev->name, err);
|
|
stats->rx_errors++;
|
|
goto drop;
|
|
}
|
|
|
|
status = le16_to_cpu(desc.status);
|
|
|
|
if (status & HERMES_RXSTAT_ERR) {
|
|
if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
|
|
wstats->discard.code++;
|
|
DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
|
|
dev->name);
|
|
} else {
|
|
stats->rx_crc_errors++;
|
|
DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
|
|
}
|
|
stats->rx_errors++;
|
|
goto drop;
|
|
}
|
|
|
|
/* For now we ignore the 802.11 header completely, assuming
|
|
that the card's firmware has handled anything vital */
|
|
|
|
err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
|
|
rxfid, HERMES_802_3_OFFSET);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: error %d reading frame header. "
|
|
"Frame dropped.\n", dev->name, err);
|
|
stats->rx_errors++;
|
|
goto drop;
|
|
}
|
|
|
|
length = ntohs(hdr.len);
|
|
|
|
/* Sanity checks */
|
|
if (length < 3) { /* No for even an 802.2 LLC header */
|
|
/* At least on Symbol firmware with PCF we get quite a
|
|
lot of these legitimately - Poll frames with no
|
|
data. */
|
|
stats->rx_dropped++;
|
|
goto drop;
|
|
}
|
|
if (length > IEEE802_11_DATA_LEN) {
|
|
printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
|
|
dev->name, length);
|
|
stats->rx_length_errors++;
|
|
stats->rx_errors++;
|
|
goto drop;
|
|
}
|
|
|
|
/* We need space for the packet data itself, plus an ethernet
|
|
header, plus 2 bytes so we can align the IP header on a
|
|
32bit boundary, plus 1 byte so we can read in odd length
|
|
packets from the card, which has an IO granularity of 16
|
|
bits */
|
|
skb = dev_alloc_skb(length+ETH_HLEN+2+1);
|
|
if (!skb) {
|
|
printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
|
|
dev->name);
|
|
goto drop;
|
|
}
|
|
|
|
skb_reserve(skb, 2); /* This way the IP header is aligned */
|
|
|
|
/* Handle decapsulation
|
|
* In most cases, the firmware tell us about SNAP frames.
|
|
* For some reason, the SNAP frames sent by LinkSys APs
|
|
* are not properly recognised by most firmwares.
|
|
* So, check ourselves */
|
|
if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
|
|
((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
|
|
is_ethersnap(&hdr)) {
|
|
/* These indicate a SNAP within 802.2 LLC within
|
|
802.11 frame which we'll need to de-encapsulate to
|
|
the original EthernetII frame. */
|
|
|
|
if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
|
|
stats->rx_length_errors++;
|
|
goto drop;
|
|
}
|
|
|
|
/* Remove SNAP header, reconstruct EthernetII frame */
|
|
data_len = length - ENCAPS_OVERHEAD;
|
|
data_off = HERMES_802_3_OFFSET + sizeof(hdr);
|
|
|
|
eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
|
|
|
|
memcpy(eh, &hdr, 2 * ETH_ALEN);
|
|
eh->h_proto = hdr.ethertype;
|
|
} else {
|
|
/* All other cases indicate a genuine 802.3 frame. No
|
|
decapsulation needed. We just throw the whole
|
|
thing in, and hope the protocol layer can deal with
|
|
it as 802.3 */
|
|
data_len = length;
|
|
data_off = HERMES_802_3_OFFSET;
|
|
/* FIXME: we re-read from the card data we already read here */
|
|
}
|
|
|
|
p = skb_put(skb, data_len);
|
|
err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
|
|
rxfid, data_off);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: error %d reading frame. "
|
|
"Frame dropped.\n", dev->name, err);
|
|
stats->rx_errors++;
|
|
goto drop;
|
|
}
|
|
|
|
dev->last_rx = jiffies;
|
|
skb->dev = dev;
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
/* Process the wireless stats if needed */
|
|
orinoco_stat_gather(dev, skb, &desc);
|
|
|
|
/* Pass the packet to the networking stack */
|
|
netif_rx(skb);
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += length;
|
|
|
|
return;
|
|
|
|
drop:
|
|
stats->rx_dropped++;
|
|
|
|
if (skb)
|
|
dev_kfree_skb_irq(skb);
|
|
return;
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Rx path (info frames) */
|
|
/********************************************************************/
|
|
|
|
static void print_linkstatus(struct net_device *dev, u16 status)
|
|
{
|
|
char * s;
|
|
|
|
if (suppress_linkstatus)
|
|
return;
|
|
|
|
switch (status) {
|
|
case HERMES_LINKSTATUS_NOT_CONNECTED:
|
|
s = "Not Connected";
|
|
break;
|
|
case HERMES_LINKSTATUS_CONNECTED:
|
|
s = "Connected";
|
|
break;
|
|
case HERMES_LINKSTATUS_DISCONNECTED:
|
|
s = "Disconnected";
|
|
break;
|
|
case HERMES_LINKSTATUS_AP_CHANGE:
|
|
s = "AP Changed";
|
|
break;
|
|
case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
|
|
s = "AP Out of Range";
|
|
break;
|
|
case HERMES_LINKSTATUS_AP_IN_RANGE:
|
|
s = "AP In Range";
|
|
break;
|
|
case HERMES_LINKSTATUS_ASSOC_FAILED:
|
|
s = "Association Failed";
|
|
break;
|
|
default:
|
|
s = "UNKNOWN";
|
|
}
|
|
|
|
printk(KERN_INFO "%s: New link status: %s (%04x)\n",
|
|
dev->name, s, status);
|
|
}
|
|
|
|
static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
u16 infofid;
|
|
struct {
|
|
u16 len;
|
|
u16 type;
|
|
} __attribute__ ((packed)) info;
|
|
int len, type;
|
|
int err;
|
|
|
|
/* This is an answer to an INQUIRE command that we did earlier,
|
|
* or an information "event" generated by the card
|
|
* The controller return to us a pseudo frame containing
|
|
* the information in question - Jean II */
|
|
infofid = hermes_read_regn(hw, INFOFID);
|
|
|
|
/* Read the info frame header - don't try too hard */
|
|
err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
|
|
infofid, 0);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: error %d reading info frame. "
|
|
"Frame dropped.\n", dev->name, err);
|
|
return;
|
|
}
|
|
|
|
len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
|
|
type = le16_to_cpu(info.type);
|
|
|
|
switch (type) {
|
|
case HERMES_INQ_TALLIES: {
|
|
struct hermes_tallies_frame tallies;
|
|
struct iw_statistics *wstats = &priv->wstats;
|
|
|
|
if (len > sizeof(tallies)) {
|
|
printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
|
|
dev->name, len);
|
|
len = sizeof(tallies);
|
|
}
|
|
|
|
/* Read directly the data (no seek) */
|
|
hermes_read_words(hw, HERMES_DATA1, (void *) &tallies,
|
|
len / 2); /* FIXME: blech! */
|
|
|
|
/* Increment our various counters */
|
|
/* wstats->discard.nwid - no wrong BSSID stuff */
|
|
wstats->discard.code +=
|
|
le16_to_cpu(tallies.RxWEPUndecryptable);
|
|
if (len == sizeof(tallies))
|
|
wstats->discard.code +=
|
|
le16_to_cpu(tallies.RxDiscards_WEPICVError) +
|
|
le16_to_cpu(tallies.RxDiscards_WEPExcluded);
|
|
wstats->discard.misc +=
|
|
le16_to_cpu(tallies.TxDiscardsWrongSA);
|
|
wstats->discard.fragment +=
|
|
le16_to_cpu(tallies.RxMsgInBadMsgFragments);
|
|
wstats->discard.retries +=
|
|
le16_to_cpu(tallies.TxRetryLimitExceeded);
|
|
/* wstats->miss.beacon - no match */
|
|
}
|
|
break;
|
|
case HERMES_INQ_LINKSTATUS: {
|
|
struct hermes_linkstatus linkstatus;
|
|
u16 newstatus;
|
|
int connected;
|
|
|
|
if (len != sizeof(linkstatus)) {
|
|
printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
|
|
dev->name, len);
|
|
break;
|
|
}
|
|
|
|
hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus,
|
|
len / 2);
|
|
newstatus = le16_to_cpu(linkstatus.linkstatus);
|
|
|
|
connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
|
|
|| (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
|
|
|| (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
|
|
|
|
if (connected)
|
|
netif_carrier_on(dev);
|
|
else
|
|
netif_carrier_off(dev);
|
|
|
|
if (newstatus != priv->last_linkstatus)
|
|
print_linkstatus(dev, newstatus);
|
|
|
|
priv->last_linkstatus = newstatus;
|
|
}
|
|
break;
|
|
default:
|
|
printk(KERN_DEBUG "%s: Unknown information frame received: "
|
|
"type 0x%04x, length %d\n", dev->name, type, len);
|
|
/* We don't actually do anything about it */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
if (net_ratelimit())
|
|
printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Internal hardware control routines */
|
|
/********************************************************************/
|
|
|
|
int __orinoco_up(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct hermes *hw = &priv->hw;
|
|
int err;
|
|
|
|
err = __orinoco_program_rids(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d configuring card\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
/* Fire things up again */
|
|
hermes_set_irqmask(hw, ORINOCO_INTEN);
|
|
err = hermes_enable_port(hw, 0);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d enabling MAC port\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __orinoco_down(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct hermes *hw = &priv->hw;
|
|
int err;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (! priv->hw_unavailable) {
|
|
if (! priv->broken_disableport) {
|
|
err = hermes_disable_port(hw, 0);
|
|
if (err) {
|
|
/* Some firmwares (e.g. Intersil 1.3.x) seem
|
|
* to have problems disabling the port, oh
|
|
* well, too bad. */
|
|
printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
|
|
dev->name, err);
|
|
priv->broken_disableport = 1;
|
|
}
|
|
}
|
|
hermes_set_irqmask(hw, 0);
|
|
hermes_write_regn(hw, EVACK, 0xffff);
|
|
}
|
|
|
|
/* firmware will have to reassociate */
|
|
netif_carrier_off(dev);
|
|
priv->last_linkstatus = 0xffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int orinoco_reinit_firmware(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct hermes *hw = &priv->hw;
|
|
int err;
|
|
|
|
err = hermes_init(hw);
|
|
if (err)
|
|
return err;
|
|
|
|
err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
|
|
if (err == -EIO) {
|
|
/* Try workaround for old Symbol firmware bug */
|
|
printk(KERN_WARNING "%s: firmware ALLOC bug detected "
|
|
"(old Symbol firmware?). Trying to work around... ",
|
|
dev->name);
|
|
|
|
priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
|
|
err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
|
|
if (err)
|
|
printk("failed!\n");
|
|
else
|
|
printk("ok.\n");
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
|
|
{
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
|
|
if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
|
|
printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
|
|
priv->ndev->name, priv->bitratemode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (priv->firmware_type) {
|
|
case FIRMWARE_TYPE_AGERE:
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFTXRATECONTROL,
|
|
bitrate_table[priv->bitratemode].agere_txratectrl);
|
|
break;
|
|
case FIRMWARE_TYPE_INTERSIL:
|
|
case FIRMWARE_TYPE_SYMBOL:
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFTXRATECONTROL,
|
|
bitrate_table[priv->bitratemode].intersil_txratectrl);
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Change the WEP keys and/or the current keys. Can be called
|
|
* either from __orinoco_hw_setup_wep() or directly from
|
|
* orinoco_ioctl_setiwencode(). In the later case the association
|
|
* with the AP is not broken (if the firmware can handle it),
|
|
* which is needed for 802.1x implementations. */
|
|
static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
|
|
{
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
|
|
switch (priv->firmware_type) {
|
|
case FIRMWARE_TYPE_AGERE:
|
|
err = HERMES_WRITE_RECORD(hw, USER_BAP,
|
|
HERMES_RID_CNFWEPKEYS_AGERE,
|
|
&priv->keys);
|
|
if (err)
|
|
return err;
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFTXKEY_AGERE,
|
|
priv->tx_key);
|
|
if (err)
|
|
return err;
|
|
break;
|
|
case FIRMWARE_TYPE_INTERSIL:
|
|
case FIRMWARE_TYPE_SYMBOL:
|
|
{
|
|
int keylen;
|
|
int i;
|
|
|
|
/* Force uniform key length to work around firmware bugs */
|
|
keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
|
|
|
|
if (keylen > LARGE_KEY_SIZE) {
|
|
printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
|
|
priv->ndev->name, priv->tx_key, keylen);
|
|
return -E2BIG;
|
|
}
|
|
|
|
/* Write all 4 keys */
|
|
for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
|
|
err = hermes_write_ltv(hw, USER_BAP,
|
|
HERMES_RID_CNFDEFAULTKEY0 + i,
|
|
HERMES_BYTES_TO_RECLEN(keylen),
|
|
priv->keys[i].data);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* Write the index of the key used in transmission */
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFWEPDEFAULTKEYID,
|
|
priv->tx_key);
|
|
if (err)
|
|
return err;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
|
|
{
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
int master_wep_flag;
|
|
int auth_flag;
|
|
|
|
if (priv->wep_on)
|
|
__orinoco_hw_setup_wepkeys(priv);
|
|
|
|
if (priv->wep_restrict)
|
|
auth_flag = HERMES_AUTH_SHARED_KEY;
|
|
else
|
|
auth_flag = HERMES_AUTH_OPEN;
|
|
|
|
switch (priv->firmware_type) {
|
|
case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
|
|
if (priv->wep_on) {
|
|
/* Enable the shared-key authentication. */
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFAUTHENTICATION_AGERE,
|
|
auth_flag);
|
|
}
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFWEPENABLED_AGERE,
|
|
priv->wep_on);
|
|
if (err)
|
|
return err;
|
|
break;
|
|
|
|
case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
|
|
case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
|
|
if (priv->wep_on) {
|
|
if (priv->wep_restrict ||
|
|
(priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
|
|
master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
|
|
HERMES_WEP_EXCL_UNENCRYPTED;
|
|
else
|
|
master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
|
|
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFAUTHENTICATION,
|
|
auth_flag);
|
|
if (err)
|
|
return err;
|
|
} else
|
|
master_wep_flag = 0;
|
|
|
|
if (priv->iw_mode == IW_MODE_MONITOR)
|
|
master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
|
|
|
|
/* Master WEP setting : on/off */
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFWEPFLAGS_INTERSIL,
|
|
master_wep_flag);
|
|
if (err)
|
|
return err;
|
|
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __orinoco_program_rids(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err;
|
|
struct hermes_idstring idbuf;
|
|
|
|
/* Set the MAC address */
|
|
err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
|
|
HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting MAC address\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
/* Set up the link mode */
|
|
err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
|
|
priv->port_type);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting port type\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
/* Set the channel/frequency */
|
|
if (priv->channel == 0) {
|
|
printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name);
|
|
if (priv->createibss)
|
|
priv->channel = 10;
|
|
}
|
|
err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL,
|
|
priv->channel);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting channel\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
if (priv->has_ibss) {
|
|
u16 createibss;
|
|
|
|
if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
|
|
printk(KERN_WARNING "%s: This firmware requires an "
|
|
"ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
|
|
/* With wvlan_cs, in this case, we would crash.
|
|
* hopefully, this driver will behave better...
|
|
* Jean II */
|
|
createibss = 0;
|
|
} else {
|
|
createibss = priv->createibss;
|
|
}
|
|
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFCREATEIBSS,
|
|
createibss);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* Set the desired ESSID */
|
|
idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
|
|
memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
|
|
/* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
|
|
err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
|
|
HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
|
|
&idbuf);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
|
|
HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
|
|
&idbuf);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
/* Set the station name */
|
|
idbuf.len = cpu_to_le16(strlen(priv->nick));
|
|
memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
|
|
err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
|
|
HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
|
|
&idbuf);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting nickname\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
/* Set AP density */
|
|
if (priv->has_sensitivity) {
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFSYSTEMSCALE,
|
|
priv->ap_density);
|
|
if (err) {
|
|
printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
|
|
"Disabling sensitivity control\n",
|
|
dev->name, err);
|
|
|
|
priv->has_sensitivity = 0;
|
|
}
|
|
}
|
|
|
|
/* Set RTS threshold */
|
|
err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
|
|
priv->rts_thresh);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
/* Set fragmentation threshold or MWO robustness */
|
|
if (priv->has_mwo)
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFMWOROBUST_AGERE,
|
|
priv->mwo_robust);
|
|
else
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
|
|
priv->frag_thresh);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting fragmentation\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
/* Set bitrate */
|
|
err = __orinoco_hw_set_bitrate(priv);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting bitrate\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
/* Set power management */
|
|
if (priv->has_pm) {
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFPMENABLED,
|
|
priv->pm_on);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting up PM\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFMULTICASTRECEIVE,
|
|
priv->pm_mcast);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting up PM\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFMAXSLEEPDURATION,
|
|
priv->pm_period);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting up PM\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFPMHOLDOVERDURATION,
|
|
priv->pm_timeout);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting up PM\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* Set preamble - only for Symbol so far... */
|
|
if (priv->has_preamble) {
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFPREAMBLE_SYMBOL,
|
|
priv->preamble);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting preamble\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* Set up encryption */
|
|
if (priv->has_wep) {
|
|
err = __orinoco_hw_setup_wep(priv);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d activating WEP\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* Set promiscuity / multicast*/
|
|
priv->promiscuous = 0;
|
|
priv->mc_count = 0;
|
|
__orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* FIXME: return int? */
|
|
static void
|
|
__orinoco_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
int promisc, mc_count;
|
|
|
|
/* The Hermes doesn't seem to have an allmulti mode, so we go
|
|
* into promiscuous mode and let the upper levels deal. */
|
|
if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
|
|
(dev->mc_count > MAX_MULTICAST(priv)) ) {
|
|
promisc = 1;
|
|
mc_count = 0;
|
|
} else {
|
|
promisc = 0;
|
|
mc_count = dev->mc_count;
|
|
}
|
|
|
|
if (promisc != priv->promiscuous) {
|
|
err = hermes_write_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFPROMISCUOUSMODE,
|
|
promisc);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
|
|
dev->name, err);
|
|
} else
|
|
priv->promiscuous = promisc;
|
|
}
|
|
|
|
if (! promisc && (mc_count || priv->mc_count) ) {
|
|
struct dev_mc_list *p = dev->mc_list;
|
|
struct hermes_multicast mclist;
|
|
int i;
|
|
|
|
for (i = 0; i < mc_count; i++) {
|
|
/* paranoia: is list shorter than mc_count? */
|
|
BUG_ON(! p);
|
|
/* paranoia: bad address size in list? */
|
|
BUG_ON(p->dmi_addrlen != ETH_ALEN);
|
|
|
|
memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
|
|
p = p->next;
|
|
}
|
|
|
|
if (p)
|
|
printk(KERN_WARNING "%s: Multicast list is "
|
|
"longer than mc_count\n", dev->name);
|
|
|
|
err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
|
|
HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
|
|
&mclist);
|
|
if (err)
|
|
printk(KERN_ERR "%s: Error %d setting multicast list.\n",
|
|
dev->name, err);
|
|
else
|
|
priv->mc_count = mc_count;
|
|
}
|
|
|
|
/* Since we can set the promiscuous flag when it wasn't asked
|
|
for, make sure the net_device knows about it. */
|
|
if (priv->promiscuous)
|
|
dev->flags |= IFF_PROMISC;
|
|
else
|
|
dev->flags &= ~IFF_PROMISC;
|
|
}
|
|
|
|
static int orinoco_reconfigure(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct hermes *hw = &priv->hw;
|
|
unsigned long flags;
|
|
int err = 0;
|
|
|
|
if (priv->broken_disableport) {
|
|
schedule_work(&priv->reset_work);
|
|
return 0;
|
|
}
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
err = hermes_disable_port(hw, 0);
|
|
if (err) {
|
|
printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
|
|
dev->name);
|
|
priv->broken_disableport = 1;
|
|
goto out;
|
|
}
|
|
|
|
err = __orinoco_program_rids(dev);
|
|
if (err) {
|
|
printk(KERN_WARNING "%s: Unable to reconfigure card\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
err = hermes_enable_port(hw, 0);
|
|
if (err) {
|
|
printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
if (err) {
|
|
printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
|
|
schedule_work(&priv->reset_work);
|
|
err = 0;
|
|
}
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
return err;
|
|
|
|
}
|
|
|
|
/* This must be called from user context, without locks held - use
|
|
* schedule_work() */
|
|
static void orinoco_reset(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct hermes *hw = &priv->hw;
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
/* When the hardware becomes available again, whatever
|
|
* detects that is responsible for re-initializing
|
|
* it. So no need for anything further */
|
|
return;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Shut off interrupts. Depending on what state the hardware
|
|
* is in, this might not work, but we'll try anyway */
|
|
hermes_set_irqmask(hw, 0);
|
|
hermes_write_regn(hw, EVACK, 0xffff);
|
|
|
|
priv->hw_unavailable++;
|
|
priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
|
|
netif_carrier_off(dev);
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
if (priv->hard_reset)
|
|
err = (*priv->hard_reset)(priv);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: orinoco_reset: Error %d "
|
|
"performing hard reset\n", dev->name, err);
|
|
/* FIXME: shutdown of some sort */
|
|
return;
|
|
}
|
|
|
|
err = orinoco_reinit_firmware(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
|
|
dev->name, err);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irq(&priv->lock); /* This has to be called from user context */
|
|
|
|
priv->hw_unavailable--;
|
|
|
|
/* priv->open or priv->hw_unavailable might have changed while
|
|
* we dropped the lock */
|
|
if (priv->open && (! priv->hw_unavailable)) {
|
|
err = __orinoco_up(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
|
|
dev->name, err);
|
|
} else
|
|
dev->trans_start = jiffies;
|
|
}
|
|
|
|
spin_unlock_irq(&priv->lock);
|
|
|
|
return;
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Interrupt handler */
|
|
/********************************************************************/
|
|
|
|
static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
printk(KERN_DEBUG "%s: TICK\n", dev->name);
|
|
}
|
|
|
|
static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
|
|
{
|
|
/* This seems to happen a fair bit under load, but ignoring it
|
|
seems to work fine...*/
|
|
printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
|
|
dev->name);
|
|
}
|
|
|
|
irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int count = MAX_IRQLOOPS_PER_IRQ;
|
|
u16 evstat, events;
|
|
/* These are used to detect a runaway interrupt situation */
|
|
/* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
|
|
* we panic and shut down the hardware */
|
|
static int last_irq_jiffy = 0; /* jiffies value the last time
|
|
* we were called */
|
|
static int loops_this_jiffy = 0;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0) {
|
|
/* If hw is unavailable - we don't know if the irq was
|
|
* for us or not */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
evstat = hermes_read_regn(hw, EVSTAT);
|
|
events = evstat & hw->inten;
|
|
if (! events) {
|
|
orinoco_unlock(priv, &flags);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (jiffies != last_irq_jiffy)
|
|
loops_this_jiffy = 0;
|
|
last_irq_jiffy = jiffies;
|
|
|
|
while (events && count--) {
|
|
if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
|
|
printk(KERN_WARNING "%s: IRQ handler is looping too "
|
|
"much! Resetting.\n", dev->name);
|
|
/* Disable interrupts for now */
|
|
hermes_set_irqmask(hw, 0);
|
|
schedule_work(&priv->reset_work);
|
|
break;
|
|
}
|
|
|
|
/* Check the card hasn't been removed */
|
|
if (! hermes_present(hw)) {
|
|
DEBUG(0, "orinoco_interrupt(): card removed\n");
|
|
break;
|
|
}
|
|
|
|
if (events & HERMES_EV_TICK)
|
|
__orinoco_ev_tick(dev, hw);
|
|
if (events & HERMES_EV_WTERR)
|
|
__orinoco_ev_wterr(dev, hw);
|
|
if (events & HERMES_EV_INFDROP)
|
|
__orinoco_ev_infdrop(dev, hw);
|
|
if (events & HERMES_EV_INFO)
|
|
__orinoco_ev_info(dev, hw);
|
|
if (events & HERMES_EV_RX)
|
|
__orinoco_ev_rx(dev, hw);
|
|
if (events & HERMES_EV_TXEXC)
|
|
__orinoco_ev_txexc(dev, hw);
|
|
if (events & HERMES_EV_TX)
|
|
__orinoco_ev_tx(dev, hw);
|
|
if (events & HERMES_EV_ALLOC)
|
|
__orinoco_ev_alloc(dev, hw);
|
|
|
|
hermes_write_regn(hw, EVACK, events);
|
|
|
|
evstat = hermes_read_regn(hw, EVSTAT);
|
|
events = evstat & hw->inten;
|
|
};
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Initialization */
|
|
/********************************************************************/
|
|
|
|
struct comp_id {
|
|
u16 id, variant, major, minor;
|
|
} __attribute__ ((packed));
|
|
|
|
static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
|
|
{
|
|
if (nic_id->id < 0x8000)
|
|
return FIRMWARE_TYPE_AGERE;
|
|
else if (nic_id->id == 0x8000 && nic_id->major == 0)
|
|
return FIRMWARE_TYPE_SYMBOL;
|
|
else
|
|
return FIRMWARE_TYPE_INTERSIL;
|
|
}
|
|
|
|
/* Set priv->firmware type, determine firmware properties */
|
|
static int determine_firmware(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err;
|
|
struct comp_id nic_id, sta_id;
|
|
unsigned int firmver;
|
|
char tmp[SYMBOL_MAX_VER_LEN+1];
|
|
|
|
/* Get the hardware version */
|
|
err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
le16_to_cpus(&nic_id.id);
|
|
le16_to_cpus(&nic_id.variant);
|
|
le16_to_cpus(&nic_id.major);
|
|
le16_to_cpus(&nic_id.minor);
|
|
printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
|
|
dev->name, nic_id.id, nic_id.variant,
|
|
nic_id.major, nic_id.minor);
|
|
|
|
priv->firmware_type = determine_firmware_type(&nic_id);
|
|
|
|
/* Get the firmware version */
|
|
err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
|
|
dev->name, err);
|
|
return err;
|
|
}
|
|
|
|
le16_to_cpus(&sta_id.id);
|
|
le16_to_cpus(&sta_id.variant);
|
|
le16_to_cpus(&sta_id.major);
|
|
le16_to_cpus(&sta_id.minor);
|
|
printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
|
|
dev->name, sta_id.id, sta_id.variant,
|
|
sta_id.major, sta_id.minor);
|
|
|
|
switch (sta_id.id) {
|
|
case 0x15:
|
|
printk(KERN_ERR "%s: Primary firmware is active\n",
|
|
dev->name);
|
|
return -ENODEV;
|
|
case 0x14b:
|
|
printk(KERN_ERR "%s: Tertiary firmware is active\n",
|
|
dev->name);
|
|
return -ENODEV;
|
|
case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
|
|
case 0x21: /* Symbol Spectrum24 Trilogy */
|
|
break;
|
|
default:
|
|
printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
|
|
dev->name);
|
|
break;
|
|
}
|
|
|
|
/* Default capabilities */
|
|
priv->has_sensitivity = 1;
|
|
priv->has_mwo = 0;
|
|
priv->has_preamble = 0;
|
|
priv->has_port3 = 1;
|
|
priv->has_ibss = 1;
|
|
priv->has_wep = 0;
|
|
priv->has_big_wep = 0;
|
|
|
|
/* Determine capabilities from the firmware version */
|
|
switch (priv->firmware_type) {
|
|
case FIRMWARE_TYPE_AGERE:
|
|
/* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
|
|
ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
|
|
snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
|
|
"Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
|
|
|
|
firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
|
|
|
|
priv->has_ibss = (firmver >= 0x60006);
|
|
priv->has_wep = (firmver >= 0x40020);
|
|
priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
|
|
Gold cards from the others? */
|
|
priv->has_mwo = (firmver >= 0x60000);
|
|
priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
|
|
priv->ibss_port = 1;
|
|
|
|
/* Tested with Agere firmware :
|
|
* 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
|
|
* Tested CableTron firmware : 4.32 => Anton */
|
|
break;
|
|
case FIRMWARE_TYPE_SYMBOL:
|
|
/* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
|
|
/* Intel MAC : 00:02:B3:* */
|
|
/* 3Com MAC : 00:50:DA:* */
|
|
memset(tmp, 0, sizeof(tmp));
|
|
/* Get the Symbol firmware version */
|
|
err = hermes_read_ltv(hw, USER_BAP,
|
|
HERMES_RID_SECONDARYVERSION_SYMBOL,
|
|
SYMBOL_MAX_VER_LEN, NULL, &tmp);
|
|
if (err) {
|
|
printk(KERN_WARNING
|
|
"%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
|
|
dev->name, err);
|
|
firmver = 0;
|
|
tmp[0] = '\0';
|
|
} else {
|
|
/* The firmware revision is a string, the format is
|
|
* something like : "V2.20-01".
|
|
* Quick and dirty parsing... - Jean II
|
|
*/
|
|
firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
|
|
| ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
|
|
| (tmp[7] - '0');
|
|
|
|
tmp[SYMBOL_MAX_VER_LEN] = '\0';
|
|
}
|
|
|
|
snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
|
|
"Symbol %s", tmp);
|
|
|
|
priv->has_ibss = (firmver >= 0x20000);
|
|
priv->has_wep = (firmver >= 0x15012);
|
|
priv->has_big_wep = (firmver >= 0x20000);
|
|
priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
|
|
(firmver >= 0x29000 && firmver < 0x30000) ||
|
|
firmver >= 0x31000;
|
|
priv->has_preamble = (firmver >= 0x20000);
|
|
priv->ibss_port = 4;
|
|
/* Tested with Intel firmware : 0x20015 => Jean II */
|
|
/* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
|
|
break;
|
|
case FIRMWARE_TYPE_INTERSIL:
|
|
/* D-Link, Linksys, Adtron, ZoomAir, and many others...
|
|
* Samsung, Compaq 100/200 and Proxim are slightly
|
|
* different and less well tested */
|
|
/* D-Link MAC : 00:40:05:* */
|
|
/* Addtron MAC : 00:90:D1:* */
|
|
snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
|
|
"Intersil %d.%d.%d", sta_id.major, sta_id.minor,
|
|
sta_id.variant);
|
|
|
|
firmver = ((unsigned long)sta_id.major << 16) |
|
|
((unsigned long)sta_id.minor << 8) | sta_id.variant;
|
|
|
|
priv->has_ibss = (firmver >= 0x000700); /* FIXME */
|
|
priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
|
|
priv->has_pm = (firmver >= 0x000700);
|
|
|
|
if (firmver >= 0x000800)
|
|
priv->ibss_port = 0;
|
|
else {
|
|
printk(KERN_NOTICE "%s: Intersil firmware earlier "
|
|
"than v0.8.x - several features not supported\n",
|
|
dev->name);
|
|
priv->ibss_port = 1;
|
|
}
|
|
break;
|
|
}
|
|
printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
|
|
priv->fw_name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_init(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
struct hermes_idstring nickbuf;
|
|
u16 reclen;
|
|
int len;
|
|
|
|
TRACE_ENTER(dev->name);
|
|
|
|
/* No need to lock, the hw_unavailable flag is already set in
|
|
* alloc_orinocodev() */
|
|
priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN;
|
|
|
|
/* Initialize the firmware */
|
|
err = hermes_init(hw);
|
|
if (err != 0) {
|
|
printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
|
|
dev->name, err);
|
|
goto out;
|
|
}
|
|
|
|
err = determine_firmware(dev);
|
|
if (err != 0) {
|
|
printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
if (priv->has_port3)
|
|
printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
|
|
if (priv->has_ibss)
|
|
printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
|
|
dev->name);
|
|
if (priv->has_wep) {
|
|
printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
|
|
if (priv->has_big_wep)
|
|
printk("104-bit key\n");
|
|
else
|
|
printk("40-bit key\n");
|
|
}
|
|
|
|
/* Get the MAC address */
|
|
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
|
|
ETH_ALEN, NULL, dev->dev_addr);
|
|
if (err) {
|
|
printk(KERN_WARNING "%s: failed to read MAC address!\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
dev->name, dev->dev_addr[0], dev->dev_addr[1],
|
|
dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4],
|
|
dev->dev_addr[5]);
|
|
|
|
/* Get the station name */
|
|
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
|
|
sizeof(nickbuf), &reclen, &nickbuf);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to read station name\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
if (nickbuf.len)
|
|
len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
|
|
else
|
|
len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
|
|
memcpy(priv->nick, &nickbuf.val, len);
|
|
priv->nick[len] = '\0';
|
|
|
|
printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
|
|
|
|
/* Get allowed channels */
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
|
|
&priv->channel_mask);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to read channel list!\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
/* Get initial AP density */
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
|
|
&priv->ap_density);
|
|
if (err || priv->ap_density < 1 || priv->ap_density > 3) {
|
|
priv->has_sensitivity = 0;
|
|
}
|
|
|
|
/* Get initial RTS threshold */
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
|
|
&priv->rts_thresh);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to read RTS threshold!\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
/* Get initial fragmentation settings */
|
|
if (priv->has_mwo)
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFMWOROBUST_AGERE,
|
|
&priv->mwo_robust);
|
|
else
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
|
|
&priv->frag_thresh);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
/* Power management setup */
|
|
if (priv->has_pm) {
|
|
priv->pm_on = 0;
|
|
priv->pm_mcast = 1;
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFMAXSLEEPDURATION,
|
|
&priv->pm_period);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to read power management period!\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFPMHOLDOVERDURATION,
|
|
&priv->pm_timeout);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to read power management timeout!\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Preamble setup */
|
|
if (priv->has_preamble) {
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFPREAMBLE_SYMBOL,
|
|
&priv->preamble);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
|
|
/* Set up the default configuration */
|
|
priv->iw_mode = IW_MODE_INFRA;
|
|
/* By default use IEEE/IBSS ad-hoc mode if we have it */
|
|
priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
|
|
set_port_type(priv);
|
|
priv->channel = 10; /* default channel, more-or-less arbitrary */
|
|
|
|
priv->promiscuous = 0;
|
|
priv->wep_on = 0;
|
|
priv->tx_key = 0;
|
|
|
|
err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
|
|
if (err == -EIO) {
|
|
/* Try workaround for old Symbol firmware bug */
|
|
printk(KERN_WARNING "%s: firmware ALLOC bug detected "
|
|
"(old Symbol firmware?). Trying to work around... ",
|
|
dev->name);
|
|
|
|
priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
|
|
err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
|
|
if (err)
|
|
printk("failed!\n");
|
|
else
|
|
printk("ok.\n");
|
|
}
|
|
if (err) {
|
|
printk("%s: Error %d allocating Tx buffer\n", dev->name, err);
|
|
goto out;
|
|
}
|
|
|
|
/* Make the hardware available, as long as it hasn't been
|
|
* removed elsewhere (e.g. by PCMCIA hot unplug) */
|
|
spin_lock_irq(&priv->lock);
|
|
priv->hw_unavailable--;
|
|
spin_unlock_irq(&priv->lock);
|
|
|
|
printk(KERN_DEBUG "%s: ready\n", dev->name);
|
|
|
|
out:
|
|
TRACE_EXIT(dev->name);
|
|
return err;
|
|
}
|
|
|
|
struct net_device *alloc_orinocodev(int sizeof_card,
|
|
int (*hard_reset)(struct orinoco_private *))
|
|
{
|
|
struct net_device *dev;
|
|
struct orinoco_private *priv;
|
|
|
|
dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
|
|
if (! dev)
|
|
return NULL;
|
|
priv = netdev_priv(dev);
|
|
priv->ndev = dev;
|
|
if (sizeof_card)
|
|
priv->card = (void *)((unsigned long)netdev_priv(dev)
|
|
+ sizeof(struct orinoco_private));
|
|
else
|
|
priv->card = NULL;
|
|
|
|
/* Setup / override net_device fields */
|
|
dev->init = orinoco_init;
|
|
dev->hard_start_xmit = orinoco_xmit;
|
|
dev->tx_timeout = orinoco_tx_timeout;
|
|
dev->watchdog_timeo = HZ; /* 1 second timeout */
|
|
dev->get_stats = orinoco_get_stats;
|
|
dev->get_wireless_stats = orinoco_get_wireless_stats;
|
|
dev->do_ioctl = orinoco_ioctl;
|
|
dev->change_mtu = orinoco_change_mtu;
|
|
dev->set_multicast_list = orinoco_set_multicast_list;
|
|
/* we use the default eth_mac_addr for setting the MAC addr */
|
|
|
|
/* Set up default callbacks */
|
|
dev->open = orinoco_open;
|
|
dev->stop = orinoco_stop;
|
|
priv->hard_reset = hard_reset;
|
|
|
|
spin_lock_init(&priv->lock);
|
|
priv->open = 0;
|
|
priv->hw_unavailable = 1; /* orinoco_init() must clear this
|
|
* before anything else touches the
|
|
* hardware */
|
|
INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
|
|
|
|
netif_carrier_off(dev);
|
|
priv->last_linkstatus = 0xffff;
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
void free_orinocodev(struct net_device *dev)
|
|
{
|
|
free_netdev(dev);
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Wireless extensions */
|
|
/********************************************************************/
|
|
|
|
static int orinoco_hw_get_bssid(struct orinoco_private *priv,
|
|
char buf[ETH_ALEN])
|
|
{
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
|
|
ETH_ALEN, NULL, buf);
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
|
|
char buf[IW_ESSID_MAX_SIZE+1])
|
|
{
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
struct hermes_idstring essidbuf;
|
|
char *p = (char *)(&essidbuf.val);
|
|
int len;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
if (strlen(priv->desired_essid) > 0) {
|
|
/* We read the desired SSID from the hardware rather
|
|
than from priv->desired_essid, just in case the
|
|
firmware is allowed to change it on us. I'm not
|
|
sure about this */
|
|
/* My guess is that the OWNSSID should always be whatever
|
|
* we set to the card, whereas CURRENT_SSID is the one that
|
|
* may change... - Jean II */
|
|
u16 rid;
|
|
|
|
*active = 1;
|
|
|
|
rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
|
|
HERMES_RID_CNFDESIREDSSID;
|
|
|
|
err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
|
|
NULL, &essidbuf);
|
|
if (err)
|
|
goto fail_unlock;
|
|
} else {
|
|
*active = 0;
|
|
|
|
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
|
|
sizeof(essidbuf), NULL, &essidbuf);
|
|
if (err)
|
|
goto fail_unlock;
|
|
}
|
|
|
|
len = le16_to_cpu(essidbuf.len);
|
|
|
|
memset(buf, 0, IW_ESSID_MAX_SIZE+1);
|
|
memcpy(buf, p, len);
|
|
buf[len] = '\0';
|
|
|
|
fail_unlock:
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static long orinoco_hw_get_freq(struct orinoco_private *priv)
|
|
{
|
|
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
u16 channel;
|
|
long freq = 0;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* Intersil firmware 1.3.5 returns 0 when the interface is down */
|
|
if (channel == 0) {
|
|
err = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
|
|
printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
|
|
priv->ndev->name, channel);
|
|
err = -EBUSY;
|
|
goto out;
|
|
|
|
}
|
|
freq = channel_frequency[channel-1] * 100000;
|
|
|
|
out:
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
if (err > 0)
|
|
err = -EBUSY;
|
|
return err ? err : freq;
|
|
}
|
|
|
|
static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
|
|
int *numrates, s32 *rates, int max)
|
|
{
|
|
hermes_t *hw = &priv->hw;
|
|
struct hermes_idstring list;
|
|
unsigned char *p = (unsigned char *)&list.val;
|
|
int err = 0;
|
|
int num;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
|
|
sizeof(list), NULL, &list);
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
num = le16_to_cpu(list.len);
|
|
*numrates = num;
|
|
num = min(num, max);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int err = 0;
|
|
int mode;
|
|
struct iw_range range;
|
|
int numrates;
|
|
int i, k;
|
|
unsigned long flags;
|
|
|
|
TRACE_ENTER(dev->name);
|
|
|
|
if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range)))
|
|
return -EFAULT;
|
|
|
|
rrq->length = sizeof(range);
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
mode = priv->iw_mode;
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
memset(&range, 0, sizeof(range));
|
|
|
|
/* Much of this shamelessly taken from wvlan_cs.c. No idea
|
|
* what it all means -dgibson */
|
|
range.we_version_compiled = WIRELESS_EXT;
|
|
range.we_version_source = 11;
|
|
|
|
range.min_nwid = range.max_nwid = 0; /* We don't use nwids */
|
|
|
|
/* Set available channels/frequencies */
|
|
range.num_channels = NUM_CHANNELS;
|
|
k = 0;
|
|
for (i = 0; i < NUM_CHANNELS; i++) {
|
|
if (priv->channel_mask & (1 << i)) {
|
|
range.freq[k].i = i + 1;
|
|
range.freq[k].m = channel_frequency[i] * 100000;
|
|
range.freq[k].e = 1;
|
|
k++;
|
|
}
|
|
|
|
if (k >= IW_MAX_FREQUENCIES)
|
|
break;
|
|
}
|
|
range.num_frequency = k;
|
|
|
|
range.sensitivity = 3;
|
|
|
|
if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
|
|
/* Quality stats meaningless in ad-hoc mode */
|
|
range.max_qual.qual = 0;
|
|
range.max_qual.level = 0;
|
|
range.max_qual.noise = 0;
|
|
range.avg_qual.qual = 0;
|
|
range.avg_qual.level = 0;
|
|
range.avg_qual.noise = 0;
|
|
} else {
|
|
range.max_qual.qual = 0x8b - 0x2f;
|
|
range.max_qual.level = 0x2f - 0x95 - 1;
|
|
range.max_qual.noise = 0x2f - 0x95 - 1;
|
|
/* Need to get better values */
|
|
range.avg_qual.qual = 0x24;
|
|
range.avg_qual.level = 0xC2;
|
|
range.avg_qual.noise = 0x9E;
|
|
}
|
|
|
|
err = orinoco_hw_get_bitratelist(priv, &numrates,
|
|
range.bitrate, IW_MAX_BITRATES);
|
|
if (err)
|
|
return err;
|
|
range.num_bitrates = numrates;
|
|
|
|
/* Set an indication of the max TCP throughput in bit/s that we can
|
|
* expect using this interface. May be use for QoS stuff...
|
|
* Jean II */
|
|
if(numrates > 2)
|
|
range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
|
|
else
|
|
range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
|
|
|
|
range.min_rts = 0;
|
|
range.max_rts = 2347;
|
|
range.min_frag = 256;
|
|
range.max_frag = 2346;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
if (priv->has_wep) {
|
|
range.max_encoding_tokens = ORINOCO_MAX_KEYS;
|
|
|
|
range.encoding_size[0] = SMALL_KEY_SIZE;
|
|
range.num_encoding_sizes = 1;
|
|
|
|
if (priv->has_big_wep) {
|
|
range.encoding_size[1] = LARGE_KEY_SIZE;
|
|
range.num_encoding_sizes = 2;
|
|
}
|
|
} else {
|
|
range.num_encoding_sizes = 0;
|
|
range.max_encoding_tokens = 0;
|
|
}
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
range.min_pmp = 0;
|
|
range.max_pmp = 65535000;
|
|
range.min_pmt = 0;
|
|
range.max_pmt = 65535 * 1000; /* ??? */
|
|
range.pmp_flags = IW_POWER_PERIOD;
|
|
range.pmt_flags = IW_POWER_TIMEOUT;
|
|
range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
|
|
|
|
range.num_txpower = 1;
|
|
range.txpower[0] = 15; /* 15dBm */
|
|
range.txpower_capa = IW_TXPOW_DBM;
|
|
|
|
range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
|
|
range.retry_flags = IW_RETRY_LIMIT;
|
|
range.r_time_flags = IW_RETRY_LIFETIME;
|
|
range.min_retry = 0;
|
|
range.max_retry = 65535; /* ??? */
|
|
range.min_r_time = 0;
|
|
range.max_r_time = 65535 * 1000; /* ??? */
|
|
|
|
if (copy_to_user(rrq->pointer, &range, sizeof(range)))
|
|
return -EFAULT;
|
|
|
|
TRACE_EXIT(dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
|
|
int setindex = priv->tx_key;
|
|
int enable = priv->wep_on;
|
|
int restricted = priv->wep_restrict;
|
|
u16 xlen = 0;
|
|
int err = 0;
|
|
char keybuf[ORINOCO_MAX_KEY_SIZE];
|
|
unsigned long flags;
|
|
|
|
if (! priv->has_wep)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (erq->pointer) {
|
|
/* We actually have a key to set - check its length */
|
|
if (erq->length > LARGE_KEY_SIZE)
|
|
return -E2BIG;
|
|
|
|
if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
|
|
return -E2BIG;
|
|
|
|
if (copy_from_user(keybuf, erq->pointer, erq->length))
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
if (erq->pointer) {
|
|
if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
|
|
index = priv->tx_key;
|
|
|
|
/* Adjust key length to a supported value */
|
|
if (erq->length > SMALL_KEY_SIZE) {
|
|
xlen = LARGE_KEY_SIZE;
|
|
} else if (erq->length > 0) {
|
|
xlen = SMALL_KEY_SIZE;
|
|
} else
|
|
xlen = 0;
|
|
|
|
/* Switch on WEP if off */
|
|
if ((!enable) && (xlen > 0)) {
|
|
setindex = index;
|
|
enable = 1;
|
|
}
|
|
} else {
|
|
/* Important note : if the user do "iwconfig eth0 enc off",
|
|
* we will arrive there with an index of -1. This is valid
|
|
* but need to be taken care off... Jean II */
|
|
if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
|
|
if((index != -1) || (erq->flags == 0)) {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
} else {
|
|
/* Set the index : Check that the key is valid */
|
|
if(priv->keys[index].len == 0) {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
setindex = index;
|
|
}
|
|
}
|
|
|
|
if (erq->flags & IW_ENCODE_DISABLED)
|
|
enable = 0;
|
|
if (erq->flags & IW_ENCODE_OPEN)
|
|
restricted = 0;
|
|
if (erq->flags & IW_ENCODE_RESTRICTED)
|
|
restricted = 1;
|
|
|
|
if (erq->pointer) {
|
|
priv->keys[index].len = cpu_to_le16(xlen);
|
|
memset(priv->keys[index].data, 0,
|
|
sizeof(priv->keys[index].data));
|
|
memcpy(priv->keys[index].data, keybuf, erq->length);
|
|
}
|
|
priv->tx_key = setindex;
|
|
|
|
/* Try fast key change if connected and only keys are changed */
|
|
if (priv->wep_on && enable && (priv->wep_restrict == restricted) &&
|
|
netif_carrier_ok(dev)) {
|
|
err = __orinoco_hw_setup_wepkeys(priv);
|
|
/* No need to commit if successful */
|
|
goto out;
|
|
}
|
|
|
|
priv->wep_on = enable;
|
|
priv->wep_restrict = restricted;
|
|
|
|
out:
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
|
|
u16 xlen = 0;
|
|
char keybuf[ORINOCO_MAX_KEY_SIZE];
|
|
unsigned long flags;
|
|
|
|
if (! priv->has_wep)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
|
|
index = priv->tx_key;
|
|
|
|
erq->flags = 0;
|
|
if (! priv->wep_on)
|
|
erq->flags |= IW_ENCODE_DISABLED;
|
|
erq->flags |= index + 1;
|
|
|
|
if (priv->wep_restrict)
|
|
erq->flags |= IW_ENCODE_RESTRICTED;
|
|
else
|
|
erq->flags |= IW_ENCODE_OPEN;
|
|
|
|
xlen = le16_to_cpu(priv->keys[index].len);
|
|
|
|
erq->length = xlen;
|
|
|
|
memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
if (erq->pointer) {
|
|
if (copy_to_user(erq->pointer, keybuf, xlen))
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
char essidbuf[IW_ESSID_MAX_SIZE+1];
|
|
unsigned long flags;
|
|
|
|
/* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
|
|
* anyway... - Jean II */
|
|
|
|
memset(&essidbuf, 0, sizeof(essidbuf));
|
|
|
|
if (erq->flags) {
|
|
if (erq->length > IW_ESSID_MAX_SIZE)
|
|
return -E2BIG;
|
|
|
|
if (copy_from_user(&essidbuf, erq->pointer, erq->length))
|
|
return -EFAULT;
|
|
|
|
essidbuf[erq->length] = '\0';
|
|
}
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid));
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
char essidbuf[IW_ESSID_MAX_SIZE+1];
|
|
int active;
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
TRACE_ENTER(dev->name);
|
|
|
|
if (netif_running(dev)) {
|
|
err = orinoco_hw_get_essid(priv, &active, essidbuf);
|
|
if (err)
|
|
return err;
|
|
} else {
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf));
|
|
orinoco_unlock(priv, &flags);
|
|
}
|
|
|
|
erq->flags = 1;
|
|
erq->length = strlen(essidbuf) + 1;
|
|
if (erq->pointer)
|
|
if (copy_to_user(erq->pointer, essidbuf, erq->length))
|
|
return -EFAULT;
|
|
|
|
TRACE_EXIT(dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
char nickbuf[IW_ESSID_MAX_SIZE+1];
|
|
unsigned long flags;
|
|
|
|
if (nrq->length > IW_ESSID_MAX_SIZE)
|
|
return -E2BIG;
|
|
|
|
memset(nickbuf, 0, sizeof(nickbuf));
|
|
|
|
if (copy_from_user(nickbuf, nrq->pointer, nrq->length))
|
|
return -EFAULT;
|
|
|
|
nickbuf[nrq->length] = '\0';
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
memcpy(priv->nick, nickbuf, sizeof(priv->nick));
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
char nickbuf[IW_ESSID_MAX_SIZE+1];
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1);
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
nrq->length = strlen(nickbuf)+1;
|
|
|
|
if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int chan = -1;
|
|
unsigned long flags;
|
|
|
|
/* We can only use this in Ad-Hoc demo mode to set the operating
|
|
* frequency, or in IBSS mode to set the frequency where the IBSS
|
|
* will be created - Jean II */
|
|
if (priv->iw_mode != IW_MODE_ADHOC)
|
|
return -EOPNOTSUPP;
|
|
|
|
if ( (frq->e == 0) && (frq->m <= 1000) ) {
|
|
/* Setting by channel number */
|
|
chan = frq->m;
|
|
} else {
|
|
/* Setting by frequency - search the table */
|
|
int mult = 1;
|
|
int i;
|
|
|
|
for (i = 0; i < (6 - frq->e); i++)
|
|
mult *= 10;
|
|
|
|
for (i = 0; i < NUM_CHANNELS; i++)
|
|
if (frq->m == (channel_frequency[i] * mult))
|
|
chan = i+1;
|
|
}
|
|
|
|
if ( (chan < 1) || (chan > NUM_CHANNELS) ||
|
|
! (priv->channel_mask & (1 << (chan-1)) ) )
|
|
return -EINVAL;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
priv->channel = chan;
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
u16 val;
|
|
int err;
|
|
unsigned long flags;
|
|
|
|
if (!priv->has_sensitivity)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFSYSTEMSCALE, &val);
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
srq->value = val;
|
|
srq->fixed = 0; /* auto */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int val = srq->value;
|
|
unsigned long flags;
|
|
|
|
if (!priv->has_sensitivity)
|
|
return -EOPNOTSUPP;
|
|
|
|
if ((val < 1) || (val > 3))
|
|
return -EINVAL;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
priv->ap_density = val;
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int val = rrq->value;
|
|
unsigned long flags;
|
|
|
|
if (rrq->disabled)
|
|
val = 2347;
|
|
|
|
if ( (val < 0) || (val > 2347) )
|
|
return -EINVAL;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
priv->rts_thresh = val;
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
if (priv->has_mwo) {
|
|
if (frq->disabled)
|
|
priv->mwo_robust = 0;
|
|
else {
|
|
if (frq->fixed)
|
|
printk(KERN_WARNING "%s: Fixed fragmentation is "
|
|
"not supported on this firmware. "
|
|
"Using MWO robust instead.\n", dev->name);
|
|
priv->mwo_robust = 1;
|
|
}
|
|
} else {
|
|
if (frq->disabled)
|
|
priv->frag_thresh = 2346;
|
|
else {
|
|
if ( (frq->value < 256) || (frq->value > 2346) )
|
|
err = -EINVAL;
|
|
else
|
|
priv->frag_thresh = frq->value & ~0x1; /* must be even */
|
|
}
|
|
}
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
u16 val;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
if (priv->has_mwo) {
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFMWOROBUST_AGERE,
|
|
&val);
|
|
if (err)
|
|
val = 0;
|
|
|
|
frq->value = val ? 2347 : 0;
|
|
frq->disabled = ! val;
|
|
frq->fixed = 0;
|
|
} else {
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
|
|
&val);
|
|
if (err)
|
|
val = 0;
|
|
|
|
frq->value = val;
|
|
frq->disabled = (val >= 2346);
|
|
frq->fixed = 1;
|
|
}
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int err = 0;
|
|
int ratemode = -1;
|
|
int bitrate; /* 100s of kilobits */
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
/* As the user space doesn't know our highest rate, it uses -1
|
|
* to ask us to set the highest rate. Test it using "iwconfig
|
|
* ethX rate auto" - Jean II */
|
|
if (rrq->value == -1)
|
|
bitrate = 110;
|
|
else {
|
|
if (rrq->value % 100000)
|
|
return -EINVAL;
|
|
bitrate = rrq->value / 100000;
|
|
}
|
|
|
|
if ( (bitrate != 10) && (bitrate != 20) &&
|
|
(bitrate != 55) && (bitrate != 110) )
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < BITRATE_TABLE_SIZE; i++)
|
|
if ( (bitrate_table[i].bitrate == bitrate) &&
|
|
(bitrate_table[i].automatic == ! rrq->fixed) ) {
|
|
ratemode = i;
|
|
break;
|
|
}
|
|
|
|
if (ratemode == -1)
|
|
return -EINVAL;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
priv->bitratemode = ratemode;
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
int ratemode;
|
|
int i;
|
|
u16 val;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
ratemode = priv->bitratemode;
|
|
|
|
BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
|
|
|
|
rrq->value = bitrate_table[ratemode].bitrate * 100000;
|
|
rrq->fixed = ! bitrate_table[ratemode].automatic;
|
|
rrq->disabled = 0;
|
|
|
|
/* If the interface is running we try to find more about the
|
|
current mode */
|
|
if (netif_running(dev)) {
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CURRENTTXRATE, &val);
|
|
if (err)
|
|
goto out;
|
|
|
|
switch (priv->firmware_type) {
|
|
case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
|
|
/* Note : in Lucent firmware, the return value of
|
|
* HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
|
|
* and therefore is totally different from the
|
|
* encoding of HERMES_RID_CNFTXRATECONTROL.
|
|
* Don't forget that 6Mb/s is really 5.5Mb/s */
|
|
if (val == 6)
|
|
rrq->value = 5500000;
|
|
else
|
|
rrq->value = val * 1000000;
|
|
break;
|
|
case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
|
|
case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
|
|
for (i = 0; i < BITRATE_TABLE_SIZE; i++)
|
|
if (bitrate_table[i].intersil_txratectrl == val) {
|
|
ratemode = i;
|
|
break;
|
|
}
|
|
if (i >= BITRATE_TABLE_SIZE)
|
|
printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
|
|
dev->name, val);
|
|
|
|
rrq->value = bitrate_table[ratemode].bitrate * 100000;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
out:
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
if (prq->disabled) {
|
|
priv->pm_on = 0;
|
|
} else {
|
|
switch (prq->flags & IW_POWER_MODE) {
|
|
case IW_POWER_UNICAST_R:
|
|
priv->pm_mcast = 0;
|
|
priv->pm_on = 1;
|
|
break;
|
|
case IW_POWER_ALL_R:
|
|
priv->pm_mcast = 1;
|
|
priv->pm_on = 1;
|
|
break;
|
|
case IW_POWER_ON:
|
|
/* No flags : but we may have a value - Jean II */
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
if (err)
|
|
goto out;
|
|
|
|
if (prq->flags & IW_POWER_TIMEOUT) {
|
|
priv->pm_on = 1;
|
|
priv->pm_timeout = prq->value / 1000;
|
|
}
|
|
if (prq->flags & IW_POWER_PERIOD) {
|
|
priv->pm_on = 1;
|
|
priv->pm_period = prq->value / 1000;
|
|
}
|
|
/* It's valid to not have a value if we are just toggling
|
|
* the flags... Jean II */
|
|
if(!priv->pm_on) {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
u16 enable, period, timeout, mcast;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP,
|
|
HERMES_RID_CNFMAXSLEEPDURATION, &period);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
|
|
if (err)
|
|
goto out;
|
|
|
|
prq->disabled = !enable;
|
|
/* Note : by default, display the period */
|
|
if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
|
|
prq->flags = IW_POWER_TIMEOUT;
|
|
prq->value = timeout * 1000;
|
|
} else {
|
|
prq->flags = IW_POWER_PERIOD;
|
|
prq->value = period * 1000;
|
|
}
|
|
if (mcast)
|
|
prq->flags |= IW_POWER_ALL_R;
|
|
else
|
|
prq->flags |= IW_POWER_UNICAST_R;
|
|
|
|
out:
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
int err = 0;
|
|
u16 short_limit, long_limit, lifetime;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
|
|
&short_limit);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
|
|
&long_limit);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
|
|
&lifetime);
|
|
if (err)
|
|
goto out;
|
|
|
|
rrq->disabled = 0; /* Can't be disabled */
|
|
|
|
/* Note : by default, display the retry number */
|
|
if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
|
|
rrq->flags = IW_RETRY_LIFETIME;
|
|
rrq->value = lifetime * 1000; /* ??? */
|
|
} else {
|
|
/* By default, display the min number */
|
|
if ((rrq->flags & IW_RETRY_MAX)) {
|
|
rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
|
|
rrq->value = long_limit;
|
|
} else {
|
|
rrq->flags = IW_RETRY_LIMIT;
|
|
rrq->value = short_limit;
|
|
if(short_limit != long_limit)
|
|
rrq->flags |= IW_RETRY_MIN;
|
|
}
|
|
}
|
|
|
|
out:
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int val = *( (int *) wrq->u.name );
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
priv->ibss_port = val ;
|
|
|
|
/* Actually update the mode we are using */
|
|
set_port_type(priv);
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int *val = (int *)wrq->u.name;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
*val = priv->ibss_port;
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int val = *( (int *) wrq->u.name );
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
switch (val) {
|
|
case 0: /* Try to do IEEE ad-hoc mode */
|
|
if (! priv->has_ibss) {
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
priv->prefer_port3 = 0;
|
|
|
|
break;
|
|
|
|
case 1: /* Try to do Lucent proprietary ad-hoc mode */
|
|
if (! priv->has_port3) {
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
priv->prefer_port3 = 1;
|
|
break;
|
|
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
|
|
if (! err)
|
|
/* Actually update the mode we are using */
|
|
set_port_type(priv);
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
int *val = (int *)wrq->u.name;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
*val = priv->prefer_port3;
|
|
orinoco_unlock(priv, &flags);
|
|
return 0;
|
|
}
|
|
|
|
/* Spy is used for link quality/strength measurements in Ad-Hoc mode
|
|
* Jean II */
|
|
static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct sockaddr address[IW_MAX_SPY];
|
|
int number = srq->length;
|
|
int i;
|
|
int err = 0;
|
|
unsigned long flags;
|
|
|
|
/* Check the number of addresses */
|
|
if (number > IW_MAX_SPY)
|
|
return -E2BIG;
|
|
|
|
/* Get the data in the driver */
|
|
if (srq->pointer) {
|
|
if (copy_from_user(address, srq->pointer,
|
|
sizeof(struct sockaddr) * number))
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* Make sure nobody mess with the structure while we do */
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
/* orinoco_lock() doesn't disable interrupts, so make sure the
|
|
* interrupt rx path don't get confused while we copy */
|
|
priv->spy_number = 0;
|
|
|
|
if (number > 0) {
|
|
/* Extract the addresses */
|
|
for (i = 0; i < number; i++)
|
|
memcpy(priv->spy_address[i], address[i].sa_data,
|
|
ETH_ALEN);
|
|
/* Reset stats */
|
|
memset(priv->spy_stat, 0,
|
|
sizeof(struct iw_quality) * IW_MAX_SPY);
|
|
/* Set number of addresses */
|
|
priv->spy_number = number;
|
|
}
|
|
|
|
/* Now, let the others play */
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct sockaddr address[IW_MAX_SPY];
|
|
struct iw_quality spy_stat[IW_MAX_SPY];
|
|
int number;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
|
|
number = priv->spy_number;
|
|
if ((number > 0) && (srq->pointer)) {
|
|
/* Create address struct */
|
|
for (i = 0; i < number; i++) {
|
|
memcpy(address[i].sa_data, priv->spy_address[i],
|
|
ETH_ALEN);
|
|
address[i].sa_family = AF_UNIX;
|
|
}
|
|
/* Copy stats */
|
|
/* In theory, we should disable irqs while copying the stats
|
|
* because the rx path might update it in the middle...
|
|
* Bah, who care ? - Jean II */
|
|
memcpy(&spy_stat, priv->spy_stat,
|
|
sizeof(struct iw_quality) * IW_MAX_SPY);
|
|
for (i=0; i < number; i++)
|
|
priv->spy_stat[i].updated = 0;
|
|
}
|
|
|
|
orinoco_unlock(priv, &flags);
|
|
|
|
/* Push stuff to user space */
|
|
srq->length = number;
|
|
if(copy_to_user(srq->pointer, address,
|
|
sizeof(struct sockaddr) * number))
|
|
return -EFAULT;
|
|
if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number),
|
|
&spy_stat, sizeof(struct iw_quality) * number))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct iwreq *wrq = (struct iwreq *)rq;
|
|
int err = 0;
|
|
int tmp;
|
|
int changed = 0;
|
|
unsigned long flags;
|
|
|
|
TRACE_ENTER(dev->name);
|
|
|
|
/* In theory, we could allow most of the the SET stuff to be
|
|
* done. In practice, the lapse of time at startup when the
|
|
* card is not ready is very short, so why bother... Note
|
|
* that netif_device_present is different from up/down
|
|
* (ifconfig), when the device is not yet up, it is usually
|
|
* already ready... Jean II */
|
|
if (! netif_device_present(dev))
|
|
return -ENODEV;
|
|
|
|
switch (cmd) {
|
|
case SIOCGIWNAME:
|
|
strcpy(wrq->u.name, "IEEE 802.11-DS");
|
|
break;
|
|
|
|
case SIOCGIWAP:
|
|
wrq->u.ap_addr.sa_family = ARPHRD_ETHER;
|
|
err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data);
|
|
break;
|
|
|
|
case SIOCGIWRANGE:
|
|
err = orinoco_ioctl_getiwrange(dev, &wrq->u.data);
|
|
break;
|
|
|
|
case SIOCSIWMODE:
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
switch (wrq->u.mode) {
|
|
case IW_MODE_ADHOC:
|
|
if (! (priv->has_ibss || priv->has_port3) )
|
|
err = -EINVAL;
|
|
else {
|
|
priv->iw_mode = IW_MODE_ADHOC;
|
|
changed = 1;
|
|
}
|
|
break;
|
|
|
|
case IW_MODE_INFRA:
|
|
priv->iw_mode = IW_MODE_INFRA;
|
|
changed = 1;
|
|
break;
|
|
|
|
default:
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
set_port_type(priv);
|
|
orinoco_unlock(priv, &flags);
|
|
break;
|
|
|
|
case SIOCGIWMODE:
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
wrq->u.mode = priv->iw_mode;
|
|
orinoco_unlock(priv, &flags);
|
|
break;
|
|
|
|
case SIOCSIWENCODE:
|
|
err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWENCODE:
|
|
if (! capable(CAP_NET_ADMIN)) {
|
|
err = -EPERM;
|
|
break;
|
|
}
|
|
|
|
err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding);
|
|
break;
|
|
|
|
case SIOCSIWESSID:
|
|
err = orinoco_ioctl_setessid(dev, &wrq->u.essid);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWESSID:
|
|
err = orinoco_ioctl_getessid(dev, &wrq->u.essid);
|
|
break;
|
|
|
|
case SIOCSIWNICKN:
|
|
err = orinoco_ioctl_setnick(dev, &wrq->u.data);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWNICKN:
|
|
err = orinoco_ioctl_getnick(dev, &wrq->u.data);
|
|
break;
|
|
|
|
case SIOCGIWFREQ:
|
|
tmp = orinoco_hw_get_freq(priv);
|
|
if (tmp < 0) {
|
|
err = tmp;
|
|
} else {
|
|
wrq->u.freq.m = tmp;
|
|
wrq->u.freq.e = 1;
|
|
}
|
|
break;
|
|
|
|
case SIOCSIWFREQ:
|
|
err = orinoco_ioctl_setfreq(dev, &wrq->u.freq);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWSENS:
|
|
err = orinoco_ioctl_getsens(dev, &wrq->u.sens);
|
|
break;
|
|
|
|
case SIOCSIWSENS:
|
|
err = orinoco_ioctl_setsens(dev, &wrq->u.sens);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWRTS:
|
|
wrq->u.rts.value = priv->rts_thresh;
|
|
wrq->u.rts.disabled = (wrq->u.rts.value == 2347);
|
|
wrq->u.rts.fixed = 1;
|
|
break;
|
|
|
|
case SIOCSIWRTS:
|
|
err = orinoco_ioctl_setrts(dev, &wrq->u.rts);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCSIWFRAG:
|
|
err = orinoco_ioctl_setfrag(dev, &wrq->u.frag);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWFRAG:
|
|
err = orinoco_ioctl_getfrag(dev, &wrq->u.frag);
|
|
break;
|
|
|
|
case SIOCSIWRATE:
|
|
err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWRATE:
|
|
err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate);
|
|
break;
|
|
|
|
case SIOCSIWPOWER:
|
|
err = orinoco_ioctl_setpower(dev, &wrq->u.power);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCGIWPOWER:
|
|
err = orinoco_ioctl_getpower(dev, &wrq->u.power);
|
|
break;
|
|
|
|
case SIOCGIWTXPOW:
|
|
/* The card only supports one tx power, so this is easy */
|
|
wrq->u.txpower.value = 15; /* dBm */
|
|
wrq->u.txpower.fixed = 1;
|
|
wrq->u.txpower.disabled = 0;
|
|
wrq->u.txpower.flags = IW_TXPOW_DBM;
|
|
break;
|
|
|
|
case SIOCSIWRETRY:
|
|
err = -EOPNOTSUPP;
|
|
break;
|
|
|
|
case SIOCGIWRETRY:
|
|
err = orinoco_ioctl_getretry(dev, &wrq->u.retry);
|
|
break;
|
|
|
|
case SIOCSIWSPY:
|
|
err = orinoco_ioctl_setspy(dev, &wrq->u.data);
|
|
break;
|
|
|
|
case SIOCGIWSPY:
|
|
err = orinoco_ioctl_getspy(dev, &wrq->u.data);
|
|
break;
|
|
|
|
case SIOCGIWPRIV:
|
|
if (wrq->u.data.pointer) {
|
|
struct iw_priv_args privtab[] = {
|
|
{ SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
|
|
{ SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
|
|
{ SIOCIWFIRSTPRIV + 0x2,
|
|
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
|
|
0, "set_port3" },
|
|
{ SIOCIWFIRSTPRIV + 0x3, 0,
|
|
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
|
|
"get_port3" },
|
|
{ SIOCIWFIRSTPRIV + 0x4,
|
|
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
|
|
0, "set_preamble" },
|
|
{ SIOCIWFIRSTPRIV + 0x5, 0,
|
|
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
|
|
"get_preamble" },
|
|
{ SIOCIWFIRSTPRIV + 0x6,
|
|
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
|
|
0, "set_ibssport" },
|
|
{ SIOCIWFIRSTPRIV + 0x7, 0,
|
|
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
|
|
"get_ibssport" },
|
|
{ SIOCIWLASTPRIV, 0, 0, "dump_recs" },
|
|
};
|
|
|
|
wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
|
|
if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
|
|
err = -EFAULT;
|
|
}
|
|
break;
|
|
|
|
case SIOCIWFIRSTPRIV + 0x0: /* force_reset */
|
|
case SIOCIWFIRSTPRIV + 0x1: /* card_reset */
|
|
if (! capable(CAP_NET_ADMIN)) {
|
|
err = -EPERM;
|
|
break;
|
|
}
|
|
|
|
printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
|
|
|
|
schedule_work(&priv->reset_work);
|
|
break;
|
|
|
|
case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */
|
|
if (! capable(CAP_NET_ADMIN)) {
|
|
err = -EPERM;
|
|
break;
|
|
}
|
|
|
|
err = orinoco_ioctl_setport3(dev, wrq);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */
|
|
err = orinoco_ioctl_getport3(dev, wrq);
|
|
break;
|
|
|
|
case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */
|
|
if (! capable(CAP_NET_ADMIN)) {
|
|
err = -EPERM;
|
|
break;
|
|
}
|
|
|
|
/* 802.11b has recently defined some short preamble.
|
|
* Basically, the Phy header has been reduced in size.
|
|
* This increase performance, especially at high rates
|
|
* (the preamble is transmitted at 1Mb/s), unfortunately
|
|
* this give compatibility troubles... - Jean II */
|
|
if(priv->has_preamble) {
|
|
int val = *( (int *) wrq->u.name );
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
if (val)
|
|
priv->preamble = 1;
|
|
else
|
|
priv->preamble = 0;
|
|
orinoco_unlock(priv, &flags);
|
|
changed = 1;
|
|
} else
|
|
err = -EOPNOTSUPP;
|
|
break;
|
|
|
|
case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */
|
|
if(priv->has_preamble) {
|
|
int *val = (int *)wrq->u.name;
|
|
|
|
if (orinoco_lock(priv, &flags) != 0)
|
|
return -EBUSY;
|
|
*val = priv->preamble;
|
|
orinoco_unlock(priv, &flags);
|
|
} else
|
|
err = -EOPNOTSUPP;
|
|
break;
|
|
case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */
|
|
if (! capable(CAP_NET_ADMIN)) {
|
|
err = -EPERM;
|
|
break;
|
|
}
|
|
|
|
err = orinoco_ioctl_setibssport(dev, wrq);
|
|
if (! err)
|
|
changed = 1;
|
|
break;
|
|
|
|
case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */
|
|
err = orinoco_ioctl_getibssport(dev, wrq);
|
|
break;
|
|
|
|
case SIOCIWLASTPRIV:
|
|
err = orinoco_debug_dump_recs(dev);
|
|
if (err)
|
|
printk(KERN_ERR "%s: Unable to dump records (%d)\n",
|
|
dev->name, err);
|
|
break;
|
|
|
|
|
|
default:
|
|
err = -EOPNOTSUPP;
|
|
}
|
|
|
|
if (! err && changed && netif_running(dev)) {
|
|
err = orinoco_reconfigure(dev);
|
|
}
|
|
|
|
TRACE_EXIT(dev->name);
|
|
|
|
return err;
|
|
}
|
|
|
|
struct {
|
|
u16 rid;
|
|
char *name;
|
|
int displaytype;
|
|
#define DISPLAY_WORDS 0
|
|
#define DISPLAY_BYTES 1
|
|
#define DISPLAY_STRING 2
|
|
#define DISPLAY_XSTRING 3
|
|
} record_table[] = {
|
|
#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type }
|
|
DEBUG_REC(CNFPORTTYPE,WORDS),
|
|
DEBUG_REC(CNFOWNMACADDR,BYTES),
|
|
DEBUG_REC(CNFDESIREDSSID,STRING),
|
|
DEBUG_REC(CNFOWNCHANNEL,WORDS),
|
|
DEBUG_REC(CNFOWNSSID,STRING),
|
|
DEBUG_REC(CNFOWNATIMWINDOW,WORDS),
|
|
DEBUG_REC(CNFSYSTEMSCALE,WORDS),
|
|
DEBUG_REC(CNFMAXDATALEN,WORDS),
|
|
DEBUG_REC(CNFPMENABLED,WORDS),
|
|
DEBUG_REC(CNFPMEPS,WORDS),
|
|
DEBUG_REC(CNFMULTICASTRECEIVE,WORDS),
|
|
DEBUG_REC(CNFMAXSLEEPDURATION,WORDS),
|
|
DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS),
|
|
DEBUG_REC(CNFOWNNAME,STRING),
|
|
DEBUG_REC(CNFOWNDTIMPERIOD,WORDS),
|
|
DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS),
|
|
DEBUG_REC(CNFWEPENABLED_AGERE,WORDS),
|
|
DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS),
|
|
DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS),
|
|
DEBUG_REC(CNFDEFAULTKEY0,BYTES),
|
|
DEBUG_REC(CNFDEFAULTKEY1,BYTES),
|
|
DEBUG_REC(CNFMWOROBUST_AGERE,WORDS),
|
|
DEBUG_REC(CNFDEFAULTKEY2,BYTES),
|
|
DEBUG_REC(CNFDEFAULTKEY3,BYTES),
|
|
DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS),
|
|
DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS),
|
|
DEBUG_REC(CNFAUTHENTICATION,WORDS),
|
|
DEBUG_REC(CNFMAXASSOCSTA,WORDS),
|
|
DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS),
|
|
DEBUG_REC(CNFTXCONTROL,WORDS),
|
|
DEBUG_REC(CNFROAMINGMODE,WORDS),
|
|
DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS),
|
|
DEBUG_REC(CNFRCVCRCERROR,WORDS),
|
|
DEBUG_REC(CNFMMLIFE,WORDS),
|
|
DEBUG_REC(CNFALTRETRYCOUNT,WORDS),
|
|
DEBUG_REC(CNFBEACONINT,WORDS),
|
|
DEBUG_REC(CNFAPPCFINFO,WORDS),
|
|
DEBUG_REC(CNFSTAPCFINFO,WORDS),
|
|
DEBUG_REC(CNFPRIORITYQUSAGE,WORDS),
|
|
DEBUG_REC(CNFTIMCTRL,WORDS),
|
|
DEBUG_REC(CNFTHIRTY2TALLY,WORDS),
|
|
DEBUG_REC(CNFENHSECURITY,WORDS),
|
|
DEBUG_REC(CNFGROUPADDRESSES,BYTES),
|
|
DEBUG_REC(CNFCREATEIBSS,WORDS),
|
|
DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS),
|
|
DEBUG_REC(CNFRTSTHRESHOLD,WORDS),
|
|
DEBUG_REC(CNFTXRATECONTROL,WORDS),
|
|
DEBUG_REC(CNFPROMISCUOUSMODE,WORDS),
|
|
DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS),
|
|
DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS),
|
|
DEBUG_REC(CNFSHORTPREAMBLE,WORDS),
|
|
DEBUG_REC(CNFWEPKEYS_AGERE,BYTES),
|
|
DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS),
|
|
DEBUG_REC(CNFTXKEY_AGERE,WORDS),
|
|
DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS),
|
|
DEBUG_REC(CNFBASICRATES,WORDS),
|
|
DEBUG_REC(CNFSUPPORTEDRATES,WORDS),
|
|
DEBUG_REC(CNFTICKTIME,WORDS),
|
|
DEBUG_REC(CNFSCANREQUEST,WORDS),
|
|
DEBUG_REC(CNFJOINREQUEST,WORDS),
|
|
DEBUG_REC(CNFAUTHENTICATESTATION,WORDS),
|
|
DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS),
|
|
DEBUG_REC(MAXLOADTIME,WORDS),
|
|
DEBUG_REC(DOWNLOADBUFFER,WORDS),
|
|
DEBUG_REC(PRIID,WORDS),
|
|
DEBUG_REC(PRISUPRANGE,WORDS),
|
|
DEBUG_REC(CFIACTRANGES,WORDS),
|
|
DEBUG_REC(NICSERNUM,XSTRING),
|
|
DEBUG_REC(NICID,WORDS),
|
|
DEBUG_REC(MFISUPRANGE,WORDS),
|
|
DEBUG_REC(CFISUPRANGE,WORDS),
|
|
DEBUG_REC(CHANNELLIST,WORDS),
|
|
DEBUG_REC(REGULATORYDOMAINS,WORDS),
|
|
DEBUG_REC(TEMPTYPE,WORDS),
|
|
/* DEBUG_REC(CIS,BYTES), */
|
|
DEBUG_REC(STAID,WORDS),
|
|
DEBUG_REC(CURRENTSSID,STRING),
|
|
DEBUG_REC(CURRENTBSSID,BYTES),
|
|
DEBUG_REC(COMMSQUALITY,WORDS),
|
|
DEBUG_REC(CURRENTTXRATE,WORDS),
|
|
DEBUG_REC(CURRENTBEACONINTERVAL,WORDS),
|
|
DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS),
|
|
DEBUG_REC(PROTOCOLRSPTIME,WORDS),
|
|
DEBUG_REC(SHORTRETRYLIMIT,WORDS),
|
|
DEBUG_REC(LONGRETRYLIMIT,WORDS),
|
|
DEBUG_REC(MAXTRANSMITLIFETIME,WORDS),
|
|
DEBUG_REC(MAXRECEIVELIFETIME,WORDS),
|
|
DEBUG_REC(CFPOLLABLE,WORDS),
|
|
DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS),
|
|
DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS),
|
|
DEBUG_REC(OWNMACADDR,BYTES),
|
|
DEBUG_REC(SCANRESULTSTABLE,WORDS),
|
|
DEBUG_REC(PHYTYPE,WORDS),
|
|
DEBUG_REC(CURRENTCHANNEL,WORDS),
|
|
DEBUG_REC(CURRENTPOWERSTATE,WORDS),
|
|
DEBUG_REC(CCAMODE,WORDS),
|
|
DEBUG_REC(SUPPORTEDDATARATES,WORDS),
|
|
DEBUG_REC(BUILDSEQ,BYTES),
|
|
DEBUG_REC(FWID,XSTRING)
|
|
#undef DEBUG_REC
|
|
};
|
|
|
|
#define DEBUG_LTV_SIZE 128
|
|
|
|
static int orinoco_debug_dump_recs(struct net_device *dev)
|
|
{
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
hermes_t *hw = &priv->hw;
|
|
u8 *val8;
|
|
u16 *val16;
|
|
int i,j;
|
|
u16 length;
|
|
int err;
|
|
|
|
/* I'm not sure: we might have a lock here, so we'd better go
|
|
atomic, just in case. */
|
|
val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC);
|
|
if (! val8)
|
|
return -ENOMEM;
|
|
val16 = (u16 *)val8;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(record_table); i++) {
|
|
u16 rid = record_table[i].rid;
|
|
int len;
|
|
|
|
memset(val8, 0, DEBUG_LTV_SIZE + 2);
|
|
|
|
err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE,
|
|
&length, val8);
|
|
if (err) {
|
|
DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid);
|
|
continue;
|
|
}
|
|
val16 = (u16 *)val8;
|
|
if (length == 0)
|
|
continue;
|
|
|
|
printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=",
|
|
record_table[i].name,
|
|
rid, length, (length-1)*2);
|
|
len = min(((int)length-1)*2, DEBUG_LTV_SIZE);
|
|
|
|
switch (record_table[i].displaytype) {
|
|
case DISPLAY_WORDS:
|
|
for (j = 0; j < len / 2; j++)
|
|
printk("%04X-", le16_to_cpu(val16[j]));
|
|
break;
|
|
|
|
case DISPLAY_BYTES:
|
|
default:
|
|
for (j = 0; j < len; j++)
|
|
printk("%02X:", val8[j]);
|
|
break;
|
|
|
|
case DISPLAY_STRING:
|
|
len = min(len, le16_to_cpu(val16[0])+2);
|
|
val8[len] = '\0';
|
|
printk("\"%s\"", (char *)&val16[1]);
|
|
break;
|
|
|
|
case DISPLAY_XSTRING:
|
|
printk("'%s'", (char *)val8);
|
|
}
|
|
|
|
printk("\n");
|
|
}
|
|
|
|
kfree(val8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/********************************************************************/
|
|
/* Debugging */
|
|
/********************************************************************/
|
|
|
|
#if 0
|
|
static void show_rx_frame(struct orinoco_rxframe_hdr *frame)
|
|
{
|
|
printk(KERN_DEBUG "RX descriptor:\n");
|
|
printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status);
|
|
printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time);
|
|
printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence);
|
|
printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal);
|
|
printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate);
|
|
printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow);
|
|
printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved);
|
|
|
|
printk(KERN_DEBUG "IEEE 802.11 header:\n");
|
|
printk(KERN_DEBUG " frame_ctl = 0x%04x\n",
|
|
frame->p80211.frame_ctl);
|
|
printk(KERN_DEBUG " duration_id = 0x%04x\n",
|
|
frame->p80211.duration_id);
|
|
printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
frame->p80211.addr1[0], frame->p80211.addr1[1],
|
|
frame->p80211.addr1[2], frame->p80211.addr1[3],
|
|
frame->p80211.addr1[4], frame->p80211.addr1[5]);
|
|
printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
frame->p80211.addr2[0], frame->p80211.addr2[1],
|
|
frame->p80211.addr2[2], frame->p80211.addr2[3],
|
|
frame->p80211.addr2[4], frame->p80211.addr2[5]);
|
|
printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
frame->p80211.addr3[0], frame->p80211.addr3[1],
|
|
frame->p80211.addr3[2], frame->p80211.addr3[3],
|
|
frame->p80211.addr3[4], frame->p80211.addr3[5]);
|
|
printk(KERN_DEBUG " seq_ctl = 0x%04x\n",
|
|
frame->p80211.seq_ctl);
|
|
printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
frame->p80211.addr4[0], frame->p80211.addr4[1],
|
|
frame->p80211.addr4[2], frame->p80211.addr4[3],
|
|
frame->p80211.addr4[4], frame->p80211.addr4[5]);
|
|
printk(KERN_DEBUG " data_len = 0x%04x\n",
|
|
frame->p80211.data_len);
|
|
|
|
printk(KERN_DEBUG "IEEE 802.3 header:\n");
|
|
printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
frame->p8023.h_dest[0], frame->p8023.h_dest[1],
|
|
frame->p8023.h_dest[2], frame->p8023.h_dest[3],
|
|
frame->p8023.h_dest[4], frame->p8023.h_dest[5]);
|
|
printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
frame->p8023.h_source[0], frame->p8023.h_source[1],
|
|
frame->p8023.h_source[2], frame->p8023.h_source[3],
|
|
frame->p8023.h_source[4], frame->p8023.h_source[5]);
|
|
printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto);
|
|
|
|
printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n");
|
|
printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap);
|
|
printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap);
|
|
printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl);
|
|
printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n",
|
|
frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]);
|
|
printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype);
|
|
}
|
|
#endif /* 0 */
|
|
|
|
/********************************************************************/
|
|
/* Module initialization */
|
|
/********************************************************************/
|
|
|
|
EXPORT_SYMBOL(alloc_orinocodev);
|
|
EXPORT_SYMBOL(free_orinocodev);
|
|
|
|
EXPORT_SYMBOL(__orinoco_up);
|
|
EXPORT_SYMBOL(__orinoco_down);
|
|
EXPORT_SYMBOL(orinoco_stop);
|
|
EXPORT_SYMBOL(orinoco_reinit_firmware);
|
|
|
|
EXPORT_SYMBOL(orinoco_interrupt);
|
|
|
|
/* Can't be declared "const" or the whole __initdata section will
|
|
* become const */
|
|
static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
|
|
" (David Gibson <hermes@gibson.dropbear.id.au>, "
|
|
"Pavel Roskin <proski@gnu.org>, et al)";
|
|
|
|
static int __init init_orinoco(void)
|
|
{
|
|
printk(KERN_DEBUG "%s\n", version);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit exit_orinoco(void)
|
|
{
|
|
}
|
|
|
|
module_init(init_orinoco);
|
|
module_exit(exit_orinoco);
|