mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 23:53:55 +08:00
db5c05b2a1
This patch was applied by mistake. Michael thinks that it
it needs more work than simply moving the soft reset.
So, it should be held back for further review.
This reverts commit 0a3237704d
.
Requested by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
929 lines
21 KiB
C
929 lines
21 KiB
C
/*
|
|
* mxl5007t.c - driver for the MaxLinear MxL5007T silicon tuner
|
|
*
|
|
* Copyright (C) 2008, 2009 Michael Krufky <mkrufky@linuxtv.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/types.h>
|
|
#include <linux/videodev2.h>
|
|
#include "tuner-i2c.h"
|
|
#include "mxl5007t.h"
|
|
|
|
static DEFINE_MUTEX(mxl5007t_list_mutex);
|
|
static LIST_HEAD(hybrid_tuner_instance_list);
|
|
|
|
static int mxl5007t_debug;
|
|
module_param_named(debug, mxl5007t_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debug level");
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define mxl_printk(kern, fmt, arg...) \
|
|
printk(kern "%s: " fmt "\n", __func__, ##arg)
|
|
|
|
#define mxl_err(fmt, arg...) \
|
|
mxl_printk(KERN_ERR, "%d: " fmt, __LINE__, ##arg)
|
|
|
|
#define mxl_warn(fmt, arg...) \
|
|
mxl_printk(KERN_WARNING, fmt, ##arg)
|
|
|
|
#define mxl_info(fmt, arg...) \
|
|
mxl_printk(KERN_INFO, fmt, ##arg)
|
|
|
|
#define mxl_debug(fmt, arg...) \
|
|
({ \
|
|
if (mxl5007t_debug) \
|
|
mxl_printk(KERN_DEBUG, fmt, ##arg); \
|
|
})
|
|
|
|
#define mxl_fail(ret) \
|
|
({ \
|
|
int __ret; \
|
|
__ret = (ret < 0); \
|
|
if (__ret) \
|
|
mxl_printk(KERN_ERR, "error %d on line %d", \
|
|
ret, __LINE__); \
|
|
__ret; \
|
|
})
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define MHz 1000000
|
|
|
|
enum mxl5007t_mode {
|
|
MxL_MODE_ISDBT = 0,
|
|
MxL_MODE_DVBT = 1,
|
|
MxL_MODE_ATSC = 2,
|
|
MxL_MODE_CABLE = 0x10,
|
|
};
|
|
|
|
enum mxl5007t_chip_version {
|
|
MxL_UNKNOWN_ID = 0x00,
|
|
MxL_5007_V1_F1 = 0x11,
|
|
MxL_5007_V1_F2 = 0x12,
|
|
MxL_5007_V4 = 0x14,
|
|
MxL_5007_V2_100_F1 = 0x21,
|
|
MxL_5007_V2_100_F2 = 0x22,
|
|
MxL_5007_V2_200_F1 = 0x23,
|
|
MxL_5007_V2_200_F2 = 0x24,
|
|
};
|
|
|
|
struct reg_pair_t {
|
|
u8 reg;
|
|
u8 val;
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static struct reg_pair_t init_tab[] = {
|
|
{ 0x02, 0x06 },
|
|
{ 0x03, 0x48 },
|
|
{ 0x05, 0x04 },
|
|
{ 0x06, 0x10 },
|
|
{ 0x2e, 0x15 }, /* OVERRIDE */
|
|
{ 0x30, 0x10 }, /* OVERRIDE */
|
|
{ 0x45, 0x58 }, /* OVERRIDE */
|
|
{ 0x48, 0x19 }, /* OVERRIDE */
|
|
{ 0x52, 0x03 }, /* OVERRIDE */
|
|
{ 0x53, 0x44 }, /* OVERRIDE */
|
|
{ 0x6a, 0x4b }, /* OVERRIDE */
|
|
{ 0x76, 0x00 }, /* OVERRIDE */
|
|
{ 0x78, 0x18 }, /* OVERRIDE */
|
|
{ 0x7a, 0x17 }, /* OVERRIDE */
|
|
{ 0x85, 0x06 }, /* OVERRIDE */
|
|
{ 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static struct reg_pair_t init_tab_cable[] = {
|
|
{ 0x02, 0x06 },
|
|
{ 0x03, 0x48 },
|
|
{ 0x05, 0x04 },
|
|
{ 0x06, 0x10 },
|
|
{ 0x09, 0x3f },
|
|
{ 0x0a, 0x3f },
|
|
{ 0x0b, 0x3f },
|
|
{ 0x2e, 0x15 }, /* OVERRIDE */
|
|
{ 0x30, 0x10 }, /* OVERRIDE */
|
|
{ 0x45, 0x58 }, /* OVERRIDE */
|
|
{ 0x48, 0x19 }, /* OVERRIDE */
|
|
{ 0x52, 0x03 }, /* OVERRIDE */
|
|
{ 0x53, 0x44 }, /* OVERRIDE */
|
|
{ 0x6a, 0x4b }, /* OVERRIDE */
|
|
{ 0x76, 0x00 }, /* OVERRIDE */
|
|
{ 0x78, 0x18 }, /* OVERRIDE */
|
|
{ 0x7a, 0x17 }, /* OVERRIDE */
|
|
{ 0x85, 0x06 }, /* OVERRIDE */
|
|
{ 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static struct reg_pair_t reg_pair_rftune[] = {
|
|
{ 0x0f, 0x00 }, /* abort tune */
|
|
{ 0x0c, 0x15 },
|
|
{ 0x0d, 0x40 },
|
|
{ 0x0e, 0x0e },
|
|
{ 0x1f, 0x87 }, /* OVERRIDE */
|
|
{ 0x20, 0x1f }, /* OVERRIDE */
|
|
{ 0x21, 0x87 }, /* OVERRIDE */
|
|
{ 0x22, 0x1f }, /* OVERRIDE */
|
|
{ 0x80, 0x01 }, /* freq dependent */
|
|
{ 0x0f, 0x01 }, /* start tune */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
struct mxl5007t_state {
|
|
struct list_head hybrid_tuner_instance_list;
|
|
struct tuner_i2c_props i2c_props;
|
|
|
|
struct mutex lock;
|
|
|
|
struct mxl5007t_config *config;
|
|
|
|
enum mxl5007t_chip_version chip_id;
|
|
|
|
struct reg_pair_t tab_init[ARRAY_SIZE(init_tab)];
|
|
struct reg_pair_t tab_init_cable[ARRAY_SIZE(init_tab_cable)];
|
|
struct reg_pair_t tab_rftune[ARRAY_SIZE(reg_pair_rftune)];
|
|
|
|
enum mxl5007t_if_freq if_freq;
|
|
|
|
u32 frequency;
|
|
u32 bandwidth;
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* called by _init and _rftun to manipulate the register arrays */
|
|
|
|
static void set_reg_bits(struct reg_pair_t *reg_pair, u8 reg, u8 mask, u8 val)
|
|
{
|
|
unsigned int i = 0;
|
|
|
|
while (reg_pair[i].reg || reg_pair[i].val) {
|
|
if (reg_pair[i].reg == reg) {
|
|
reg_pair[i].val &= ~mask;
|
|
reg_pair[i].val |= val;
|
|
}
|
|
i++;
|
|
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void copy_reg_bits(struct reg_pair_t *reg_pair1,
|
|
struct reg_pair_t *reg_pair2)
|
|
{
|
|
unsigned int i, j;
|
|
|
|
i = j = 0;
|
|
|
|
while (reg_pair1[i].reg || reg_pair1[i].val) {
|
|
while (reg_pair2[j].reg || reg_pair2[j].val) {
|
|
if (reg_pair1[i].reg != reg_pair2[j].reg) {
|
|
j++;
|
|
continue;
|
|
}
|
|
reg_pair2[j].val = reg_pair1[i].val;
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static void mxl5007t_set_mode_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_mode mode,
|
|
s32 if_diff_out_level)
|
|
{
|
|
switch (mode) {
|
|
case MxL_MODE_ATSC:
|
|
set_reg_bits(state->tab_init, 0x06, 0x1f, 0x12);
|
|
break;
|
|
case MxL_MODE_DVBT:
|
|
set_reg_bits(state->tab_init, 0x06, 0x1f, 0x11);
|
|
break;
|
|
case MxL_MODE_ISDBT:
|
|
set_reg_bits(state->tab_init, 0x06, 0x1f, 0x10);
|
|
break;
|
|
case MxL_MODE_CABLE:
|
|
set_reg_bits(state->tab_init_cable, 0x09, 0xff, 0xc1);
|
|
set_reg_bits(state->tab_init_cable, 0x0a, 0xff,
|
|
8 - if_diff_out_level);
|
|
set_reg_bits(state->tab_init_cable, 0x0b, 0xff, 0x17);
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void mxl5007t_set_if_freq_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_if_freq if_freq,
|
|
int invert_if)
|
|
{
|
|
u8 val;
|
|
|
|
switch (if_freq) {
|
|
case MxL_IF_4_MHZ:
|
|
val = 0x00;
|
|
break;
|
|
case MxL_IF_4_5_MHZ:
|
|
val = 0x02;
|
|
break;
|
|
case MxL_IF_4_57_MHZ:
|
|
val = 0x03;
|
|
break;
|
|
case MxL_IF_5_MHZ:
|
|
val = 0x04;
|
|
break;
|
|
case MxL_IF_5_38_MHZ:
|
|
val = 0x05;
|
|
break;
|
|
case MxL_IF_6_MHZ:
|
|
val = 0x06;
|
|
break;
|
|
case MxL_IF_6_28_MHZ:
|
|
val = 0x07;
|
|
break;
|
|
case MxL_IF_9_1915_MHZ:
|
|
val = 0x08;
|
|
break;
|
|
case MxL_IF_35_25_MHZ:
|
|
val = 0x09;
|
|
break;
|
|
case MxL_IF_36_15_MHZ:
|
|
val = 0x0a;
|
|
break;
|
|
case MxL_IF_44_MHZ:
|
|
val = 0x0b;
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
return;
|
|
}
|
|
set_reg_bits(state->tab_init, 0x02, 0x0f, val);
|
|
|
|
/* set inverted IF or normal IF */
|
|
set_reg_bits(state->tab_init, 0x02, 0x10, invert_if ? 0x10 : 0x00);
|
|
|
|
state->if_freq = if_freq;
|
|
|
|
return;
|
|
}
|
|
|
|
static void mxl5007t_set_xtal_freq_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_xtal_freq xtal_freq)
|
|
{
|
|
switch (xtal_freq) {
|
|
case MxL_XTAL_16_MHZ:
|
|
/* select xtal freq & ref freq */
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x00);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x00);
|
|
break;
|
|
case MxL_XTAL_20_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x10);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x01);
|
|
break;
|
|
case MxL_XTAL_20_25_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x20);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x02);
|
|
break;
|
|
case MxL_XTAL_20_48_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x30);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x03);
|
|
break;
|
|
case MxL_XTAL_24_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x40);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x04);
|
|
break;
|
|
case MxL_XTAL_25_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x50);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x05);
|
|
break;
|
|
case MxL_XTAL_25_14_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x60);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x06);
|
|
break;
|
|
case MxL_XTAL_27_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x70);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x07);
|
|
break;
|
|
case MxL_XTAL_28_8_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x80);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x08);
|
|
break;
|
|
case MxL_XTAL_32_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x90);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x09);
|
|
break;
|
|
case MxL_XTAL_40_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xa0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0a);
|
|
break;
|
|
case MxL_XTAL_44_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xb0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0b);
|
|
break;
|
|
case MxL_XTAL_48_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xc0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0c);
|
|
break;
|
|
case MxL_XTAL_49_3811_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xd0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0d);
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
return;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static struct reg_pair_t *mxl5007t_calc_init_regs(struct mxl5007t_state *state,
|
|
enum mxl5007t_mode mode)
|
|
{
|
|
struct mxl5007t_config *cfg = state->config;
|
|
|
|
memcpy(&state->tab_init, &init_tab, sizeof(init_tab));
|
|
memcpy(&state->tab_init_cable, &init_tab_cable, sizeof(init_tab_cable));
|
|
|
|
mxl5007t_set_mode_bits(state, mode, cfg->if_diff_out_level);
|
|
mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if);
|
|
mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz);
|
|
|
|
set_reg_bits(state->tab_init, 0x04, 0x01, cfg->loop_thru_enable);
|
|
set_reg_bits(state->tab_init, 0x03, 0x08, cfg->clk_out_enable << 3);
|
|
set_reg_bits(state->tab_init, 0x03, 0x07, cfg->clk_out_amp);
|
|
|
|
if (mode >= MxL_MODE_CABLE) {
|
|
copy_reg_bits(state->tab_init, state->tab_init_cable);
|
|
return state->tab_init_cable;
|
|
} else
|
|
return state->tab_init;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
enum mxl5007t_bw_mhz {
|
|
MxL_BW_6MHz = 6,
|
|
MxL_BW_7MHz = 7,
|
|
MxL_BW_8MHz = 8,
|
|
};
|
|
|
|
static void mxl5007t_set_bw_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_bw_mhz bw)
|
|
{
|
|
u8 val;
|
|
|
|
switch (bw) {
|
|
case MxL_BW_6MHz:
|
|
val = 0x15; /* set DIG_MODEINDEX, DIG_MODEINDEX_A,
|
|
* and DIG_MODEINDEX_CSF */
|
|
break;
|
|
case MxL_BW_7MHz:
|
|
val = 0x2a;
|
|
break;
|
|
case MxL_BW_8MHz:
|
|
val = 0x3f;
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
return;
|
|
}
|
|
set_reg_bits(state->tab_rftune, 0x0c, 0x3f, val);
|
|
|
|
return;
|
|
}
|
|
|
|
static struct
|
|
reg_pair_t *mxl5007t_calc_rf_tune_regs(struct mxl5007t_state *state,
|
|
u32 rf_freq, enum mxl5007t_bw_mhz bw)
|
|
{
|
|
u32 dig_rf_freq = 0;
|
|
u32 temp;
|
|
u32 frac_divider = 1000000;
|
|
unsigned int i;
|
|
|
|
memcpy(&state->tab_rftune, ®_pair_rftune, sizeof(reg_pair_rftune));
|
|
|
|
mxl5007t_set_bw_bits(state, bw);
|
|
|
|
/* Convert RF frequency into 16 bits =>
|
|
* 10 bit integer (MHz) + 6 bit fraction */
|
|
dig_rf_freq = rf_freq / MHz;
|
|
|
|
temp = rf_freq % MHz;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
dig_rf_freq <<= 1;
|
|
frac_divider /= 2;
|
|
if (temp > frac_divider) {
|
|
temp -= frac_divider;
|
|
dig_rf_freq++;
|
|
}
|
|
}
|
|
|
|
/* add to have shift center point by 7.8124 kHz */
|
|
if (temp > 7812)
|
|
dig_rf_freq++;
|
|
|
|
set_reg_bits(state->tab_rftune, 0x0d, 0xff, (u8) dig_rf_freq);
|
|
set_reg_bits(state->tab_rftune, 0x0e, 0xff, (u8) (dig_rf_freq >> 8));
|
|
|
|
if (rf_freq >= 333000000)
|
|
set_reg_bits(state->tab_rftune, 0x80, 0x40, 0x40);
|
|
|
|
return state->tab_rftune;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_write_reg(struct mxl5007t_state *state, u8 reg, u8 val)
|
|
{
|
|
u8 buf[] = { reg, val };
|
|
struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
|
|
.buf = buf, .len = 2 };
|
|
int ret;
|
|
|
|
ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
|
|
if (ret != 1) {
|
|
mxl_err("failed!");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_write_regs(struct mxl5007t_state *state,
|
|
struct reg_pair_t *reg_pair)
|
|
{
|
|
unsigned int i = 0;
|
|
int ret = 0;
|
|
|
|
while ((ret == 0) && (reg_pair[i].reg || reg_pair[i].val)) {
|
|
ret = mxl5007t_write_reg(state,
|
|
reg_pair[i].reg, reg_pair[i].val);
|
|
i++;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val)
|
|
{
|
|
u8 buf[2] = { 0xfb, reg };
|
|
struct i2c_msg msg[] = {
|
|
{ .addr = state->i2c_props.addr, .flags = 0,
|
|
.buf = buf, .len = 2 },
|
|
{ .addr = state->i2c_props.addr, .flags = I2C_M_RD,
|
|
.buf = val, .len = 1 },
|
|
};
|
|
int ret;
|
|
|
|
ret = i2c_transfer(state->i2c_props.adap, msg, 2);
|
|
if (ret != 2) {
|
|
mxl_err("failed!");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_soft_reset(struct mxl5007t_state *state)
|
|
{
|
|
u8 d = 0xff;
|
|
struct i2c_msg msg = {
|
|
.addr = state->i2c_props.addr, .flags = 0,
|
|
.buf = &d, .len = 1
|
|
};
|
|
int ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
|
|
|
|
if (ret != 1) {
|
|
mxl_err("failed!");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_tuner_init(struct mxl5007t_state *state,
|
|
enum mxl5007t_mode mode)
|
|
{
|
|
struct reg_pair_t *init_regs;
|
|
int ret;
|
|
|
|
ret = mxl5007t_soft_reset(state);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
/* calculate initialization reg array */
|
|
init_regs = mxl5007t_calc_init_regs(state, mode);
|
|
|
|
ret = mxl5007t_write_regs(state, init_regs);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
mdelay(1);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int mxl5007t_tuner_rf_tune(struct mxl5007t_state *state, u32 rf_freq_hz,
|
|
enum mxl5007t_bw_mhz bw)
|
|
{
|
|
struct reg_pair_t *rf_tune_regs;
|
|
int ret;
|
|
|
|
/* calculate channel change reg array */
|
|
rf_tune_regs = mxl5007t_calc_rf_tune_regs(state, rf_freq_hz, bw);
|
|
|
|
ret = mxl5007t_write_regs(state, rf_tune_regs);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
msleep(3);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_synth_lock_status(struct mxl5007t_state *state,
|
|
int *rf_locked, int *ref_locked)
|
|
{
|
|
u8 d;
|
|
int ret;
|
|
|
|
*rf_locked = 0;
|
|
*ref_locked = 0;
|
|
|
|
ret = mxl5007t_read_reg(state, 0xd8, &d);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
if ((d & 0x0c) == 0x0c)
|
|
*rf_locked = 1;
|
|
|
|
if ((d & 0x03) == 0x03)
|
|
*ref_locked = 1;
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
int rf_locked, ref_locked, ret;
|
|
|
|
*status = 0;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = mxl5007t_synth_lock_status(state, &rf_locked, &ref_locked);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
mxl_debug("%s%s", rf_locked ? "rf locked " : "",
|
|
ref_locked ? "ref locked" : "");
|
|
|
|
if ((rf_locked) || (ref_locked))
|
|
*status |= TUNER_STATUS_LOCKED;
|
|
fail:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u32 delsys = c->delivery_system;
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
enum mxl5007t_bw_mhz bw;
|
|
enum mxl5007t_mode mode;
|
|
int ret;
|
|
u32 freq = c->frequency;
|
|
|
|
switch (delsys) {
|
|
case SYS_ATSC:
|
|
mode = MxL_MODE_ATSC;
|
|
bw = MxL_BW_6MHz;
|
|
break;
|
|
case SYS_DVBC_ANNEX_B:
|
|
mode = MxL_MODE_CABLE;
|
|
bw = MxL_BW_6MHz;
|
|
break;
|
|
case SYS_DVBT:
|
|
case SYS_DVBT2:
|
|
mode = MxL_MODE_DVBT;
|
|
switch (c->bandwidth_hz) {
|
|
case 6000000:
|
|
bw = MxL_BW_6MHz;
|
|
break;
|
|
case 7000000:
|
|
bw = MxL_BW_7MHz;
|
|
break;
|
|
case 8000000:
|
|
bw = MxL_BW_8MHz;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
mxl_err("modulation type not supported!");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
mutex_lock(&state->lock);
|
|
|
|
ret = mxl5007t_tuner_init(state, mode);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
ret = mxl5007t_tuner_rf_tune(state, freq, bw);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
state->frequency = freq;
|
|
state->bandwidth = c->bandwidth_hz;
|
|
fail:
|
|
mutex_unlock(&state->lock);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_init(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* wake from standby */
|
|
ret = mxl5007t_write_reg(state, 0x01, 0x01);
|
|
mxl_fail(ret);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxl5007t_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* enter standby mode */
|
|
ret = mxl5007t_write_reg(state, 0x01, 0x00);
|
|
mxl_fail(ret);
|
|
ret = mxl5007t_write_reg(state, 0x0f, 0x00);
|
|
mxl_fail(ret);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
*frequency = state->frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
*bandwidth = state->bandwidth;
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
|
|
*frequency = 0;
|
|
|
|
switch (state->if_freq) {
|
|
case MxL_IF_4_MHZ:
|
|
*frequency = 4000000;
|
|
break;
|
|
case MxL_IF_4_5_MHZ:
|
|
*frequency = 4500000;
|
|
break;
|
|
case MxL_IF_4_57_MHZ:
|
|
*frequency = 4570000;
|
|
break;
|
|
case MxL_IF_5_MHZ:
|
|
*frequency = 5000000;
|
|
break;
|
|
case MxL_IF_5_38_MHZ:
|
|
*frequency = 5380000;
|
|
break;
|
|
case MxL_IF_6_MHZ:
|
|
*frequency = 6000000;
|
|
break;
|
|
case MxL_IF_6_28_MHZ:
|
|
*frequency = 6280000;
|
|
break;
|
|
case MxL_IF_9_1915_MHZ:
|
|
*frequency = 9191500;
|
|
break;
|
|
case MxL_IF_35_25_MHZ:
|
|
*frequency = 35250000;
|
|
break;
|
|
case MxL_IF_36_15_MHZ:
|
|
*frequency = 36150000;
|
|
break;
|
|
case MxL_IF_44_MHZ:
|
|
*frequency = 44000000;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_release(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
|
|
mutex_lock(&mxl5007t_list_mutex);
|
|
|
|
if (state)
|
|
hybrid_tuner_release_state(state);
|
|
|
|
mutex_unlock(&mxl5007t_list_mutex);
|
|
|
|
fe->tuner_priv = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static struct dvb_tuner_ops mxl5007t_tuner_ops = {
|
|
.info = {
|
|
.name = "MaxLinear MxL5007T",
|
|
},
|
|
.init = mxl5007t_init,
|
|
.sleep = mxl5007t_sleep,
|
|
.set_params = mxl5007t_set_params,
|
|
.get_status = mxl5007t_get_status,
|
|
.get_frequency = mxl5007t_get_frequency,
|
|
.get_bandwidth = mxl5007t_get_bandwidth,
|
|
.release = mxl5007t_release,
|
|
.get_if_frequency = mxl5007t_get_if_frequency,
|
|
};
|
|
|
|
static int mxl5007t_get_chip_id(struct mxl5007t_state *state)
|
|
{
|
|
char *name;
|
|
int ret;
|
|
u8 id;
|
|
|
|
ret = mxl5007t_read_reg(state, 0xd9, &id);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
switch (id) {
|
|
case MxL_5007_V1_F1:
|
|
name = "MxL5007.v1.f1";
|
|
break;
|
|
case MxL_5007_V1_F2:
|
|
name = "MxL5007.v1.f2";
|
|
break;
|
|
case MxL_5007_V2_100_F1:
|
|
name = "MxL5007.v2.100.f1";
|
|
break;
|
|
case MxL_5007_V2_100_F2:
|
|
name = "MxL5007.v2.100.f2";
|
|
break;
|
|
case MxL_5007_V2_200_F1:
|
|
name = "MxL5007.v2.200.f1";
|
|
break;
|
|
case MxL_5007_V2_200_F2:
|
|
name = "MxL5007.v2.200.f2";
|
|
break;
|
|
case MxL_5007_V4:
|
|
name = "MxL5007T.v4";
|
|
break;
|
|
default:
|
|
name = "MxL5007T";
|
|
printk(KERN_WARNING "%s: unknown rev (%02x)\n", __func__, id);
|
|
id = MxL_UNKNOWN_ID;
|
|
}
|
|
state->chip_id = id;
|
|
mxl_info("%s detected @ %d-%04x", name,
|
|
i2c_adapter_id(state->i2c_props.adap),
|
|
state->i2c_props.addr);
|
|
return 0;
|
|
fail:
|
|
mxl_warn("unable to identify device @ %d-%04x",
|
|
i2c_adapter_id(state->i2c_props.adap),
|
|
state->i2c_props.addr);
|
|
|
|
state->chip_id = MxL_UNKNOWN_ID;
|
|
return ret;
|
|
}
|
|
|
|
struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter *i2c, u8 addr,
|
|
struct mxl5007t_config *cfg)
|
|
{
|
|
struct mxl5007t_state *state = NULL;
|
|
int instance, ret;
|
|
|
|
mutex_lock(&mxl5007t_list_mutex);
|
|
instance = hybrid_tuner_request_state(struct mxl5007t_state, state,
|
|
hybrid_tuner_instance_list,
|
|
i2c, addr, "mxl5007t");
|
|
switch (instance) {
|
|
case 0:
|
|
goto fail;
|
|
case 1:
|
|
/* new tuner instance */
|
|
state->config = cfg;
|
|
|
|
mutex_init(&state->lock);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = mxl5007t_get_chip_id(state);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
/* check return value of mxl5007t_get_chip_id */
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
break;
|
|
default:
|
|
/* existing tuner instance */
|
|
break;
|
|
}
|
|
fe->tuner_priv = state;
|
|
mutex_unlock(&mxl5007t_list_mutex);
|
|
|
|
memcpy(&fe->ops.tuner_ops, &mxl5007t_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
return fe;
|
|
fail:
|
|
mutex_unlock(&mxl5007t_list_mutex);
|
|
|
|
mxl5007t_release(fe);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mxl5007t_attach);
|
|
MODULE_DESCRIPTION("MaxLinear MxL5007T Silicon IC tuner driver");
|
|
MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("0.2");
|
|
|
|
/*
|
|
* Overrides for Emacs so that we follow Linus's tabbing style.
|
|
* ---------------------------------------------------------------------------
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|