renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code
4e9c390036
linux-next/drivers/ata/pata_pcmcia.c
Alan Cox 3d47aa8e7e [libata] Drain data on errors 
If the device is signalling that there is data to drain after an error we
should read the bytes out and throw them away. Without this some devices
and controllers get wedged and don't recover.

Based on earlier work by Mark Lord

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-24 22:48:26 -04:00

484 lines
15 KiB
C
Raw Blame History

/*
* pata_pcmcia.c - PCMCIA PATA controller driver.
* Copyright 2005-2006 Red Hat Inc, all rights reserved.
* PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
* <openembedded@hrw.one.pl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Heavily based upon ide-cs.c
* The initial developer of the original code is David A. Hinds
* <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#define DRV_NAME "pata_pcmcia"
#define DRV_VERSION "0.3.5"
/*
* Private data structure to glue stuff together
*/
struct ata_pcmcia_info {
struct pcmcia_device *pdev;
int ndev;
dev_node_t node;
};
/**
* pcmcia_set_mode - PCMCIA specific mode setup
* @link: link
* @r_failed_dev: Return pointer for failed device
*
* Perform the tuning and setup of the devices and timings, which
* for PCMCIA is the same as any other controller. We wrap it however
* as we need to spot hardware with incorrect or missing master/slave
* decode, which alas is embarrassingly common in the PC world
*/
static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
{
struct ata_device *master = &link->device[0];
struct ata_device *slave = &link->device[1];
if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
return ata_do_set_mode(link, r_failed_dev);
if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV,
ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) {
/* Suspicious match, but could be two cards from
the same vendor - check serial */
if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n");
ata_dev_disable(slave);
}
}
return ata_do_set_mode(link, r_failed_dev);
}
/**
* pcmcia_set_mode_8bit - PCMCIA specific mode setup
* @link: link
* @r_failed_dev: Return pointer for failed device
*
* For the simple emulated 8bit stuff the less we do the better.
*/
static int pcmcia_set_mode_8bit(struct ata_link *link,
struct ata_device **r_failed_dev)
{
return 0;
}
/**
* ata_data_xfer_8bit - Transfer data by 8bit PIO
* @dev: device to target
* @buf: data buffer
* @buflen: buffer length
* @rw: read/write
*
* Transfer data from/to the device data register by 8 bit PIO.
*
* LOCKING:
* Inherited from caller.
*/
static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw)
{
struct ata_port *ap = dev->link->ap;
if (rw == READ)
ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
else
iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
return buflen;
}
/**
* pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers
* @qc: command
*
* Drain the FIFO and device of any stuck data following a command
* failing to complete. In some cases this is neccessary before a
* reset will recover the device.
*
*/
void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
{
int count;
struct ata_port *ap;
/* We only need to flush incoming data when a command was running */
if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
return;
ap = qc->ap;
/* Drain up to 64K of data before we give up this recovery method */
for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
&& count++ < 65536;)
ioread8(ap->ioaddr.data_addr);
if (count)
ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n",
count);
}
static struct scsi_host_template pcmcia_sht = {
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations pcmcia_port_ops = {
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode,
};
static struct ata_port_operations pcmcia_8bit_port_ops = {
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_data_xfer_8bit,
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode_8bit,
.drain_fifo = pcmcia_8bit_drain_fifo,
};
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
struct pcmcia_config_check {
unsigned long ctl_base;
int skip_vcc;
int is_kme;
};
static int pcmcia_check_one_config(struct pcmcia_device *pdev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
struct pcmcia_config_check *stk = priv_data;
/* Check for matching Vcc, unless we're desperate */
if (!stk->skip_vcc) {
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
return -ENODEV;
} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
return -ENODEV;
}
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
pdev->io.BasePort1 = io->win[0].base;
pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
if (!(io->flags & CISTPL_IO_16BIT))
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
if (io->nwin == 2) {
pdev->io.NumPorts1 = 8;
pdev->io.BasePort2 = io->win[1].base;
pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
stk->ctl_base = pdev->io.BasePort2;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
pdev->io.NumPorts1 = io->win[0].len;
pdev->io.NumPorts2 = 0;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
stk->ctl_base = pdev->io.BasePort1 + 0x0e;
} else
return -ENODEV;
/* If we've got this far, we're done */
return 0;
}
return -ENODEV;
}
/**
* pcmcia_init_one - attach a PCMCIA interface
* @pdev: pcmcia device
*
* Register a PCMCIA IDE interface. Such interfaces are PIO 0 and
* shared IRQ.
*/
static int pcmcia_init_one(struct pcmcia_device *pdev)
{
struct ata_host *host;
struct ata_port *ap;
struct ata_pcmcia_info *info;
struct pcmcia_config_check *stk = NULL;
int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
int n_ports = 1;
struct ata_port_operations *ops = &pcmcia_port_ops;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL)
return -ENOMEM;
/* Glue stuff together. FIXME: We may be able to get rid of info with care */
info->pdev = pdev;
pdev->priv = info;
/* Set up attributes in order to probe card and get resources */
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
pdev->io.IOAddrLines = 3;
pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
/* See if we have a manufacturer identifier. Use it to set is_kme for
vendor quirks */
is_kme = ((pdev->manf_id == MANFID_KME) &&
((pdev->card_id == PRODID_KME_KXLC005_A) ||
(pdev->card_id == PRODID_KME_KXLC005_B)));
/* Allocate resoure probing structures */
stk = kzalloc(sizeof(*stk), GFP_KERNEL);
if (!stk)
goto out1;
stk->is_kme = is_kme;
stk->skip_vcc = io_base = ctl_base = 0;
if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
stk->skip_vcc = 1;
if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
goto failed; /* No suitable config found */
}
io_base = pdev->io.BasePort1;
ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
/* iomap */
ret = -ENOMEM;
io_addr = devm_ioport_map(&pdev->dev, io_base, 8);
ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1);
if (!io_addr || !ctl_addr)
goto failed;
/* Success. Disable the IRQ nIEN line, do quirks */
iowrite8(0x02, ctl_addr);
if (is_kme)
iowrite8(0x81, ctl_addr + 0x01);
/* FIXME: Could be more ports at base + 0x10 but we only deal with
one right now */
if (pdev->io.NumPorts1 >= 0x20)
n_ports = 2;
if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
ops = &pcmcia_8bit_port_ops;
/*
* Having done the PCMCIA plumbing the ATA side is relatively
* sane.
*/
ret = -ENOMEM;
host = ata_host_alloc(&pdev->dev, n_ports);
if (!host)
goto failed;
for (p = 0; p < n_ports; p++) {
ap = host->ports[p];
ap->ops = ops;
ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */
ap->flags |= ATA_FLAG_SLAVE_POSS;
ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
}
/* activate */
ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;
info->ndev = 1;
kfree(stk);
return 0;
cs_failed:
cs_error(pdev, last_fn, last_ret);
failed:
kfree(stk);
info->ndev = 0;
pcmcia_disable_device(pdev);
out1:
kfree(info);
return ret;
}
/**
* pcmcia_remove_one - unplug an pcmcia interface
* @pdev: pcmcia device
*
* A PCMCIA ATA device has been unplugged. Perform the needed
* cleanup. Also called on module unload for any active devices.
*/
static void pcmcia_remove_one(struct pcmcia_device *pdev)
{
struct ata_pcmcia_info *info = pdev->priv;
struct device *dev = &pdev->dev;
if (info != NULL) {
/* If we have attached the device to the ATA layer, detach it */
if (info->ndev) {
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
}
info->ndev = 0;
pdev->priv = NULL;
}
pcmcia_disable_device(pdev);
kfree(info);
}
static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_FUNC_ID(4),
PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices);
static struct pcmcia_driver pcmcia_driver = {
.owner = THIS_MODULE,
.drv = {
.name = DRV_NAME,
},
.id_table = pcmcia_devices,
.probe = pcmcia_init_one,
.remove = pcmcia_remove_one,
};
static int __init pcmcia_init(void)
{
return pcmcia_register_driver(&pcmcia_driver);
}
static void __exit pcmcia_exit(void)
{
pcmcia_unregister_driver(&pcmcia_driver);
}
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for PCMCIA ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
module_init(pcmcia_init);
module_exit(pcmcia_exit);
View Git Blame Copy Permalink