mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 13:43:55 +08:00
e6ae919590
Fix to return a negative error code from the error handling case instead of 0. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
294 lines
6.5 KiB
C
294 lines
6.5 KiB
C
/*
|
|
* GPIO interface for Intel Sodaville SoCs.
|
|
*
|
|
* Copyright (c) 2010, 2011 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/basic_mmio_gpio.h>
|
|
|
|
#define DRV_NAME "sdv_gpio"
|
|
#define SDV_NUM_PUB_GPIOS 12
|
|
#define PCI_DEVICE_ID_SDV_GPIO 0x2e67
|
|
#define GPIO_BAR 0
|
|
|
|
#define GPOUTR 0x00
|
|
#define GPOER 0x04
|
|
#define GPINR 0x08
|
|
|
|
#define GPSTR 0x0c
|
|
#define GPIT1R0 0x10
|
|
#define GPIO_INT 0x14
|
|
#define GPIT1R1 0x18
|
|
|
|
#define GPMUXCTL 0x1c
|
|
|
|
struct sdv_gpio_chip_data {
|
|
int irq_base;
|
|
void __iomem *gpio_pub_base;
|
|
struct irq_domain *id;
|
|
struct irq_chip_generic *gc;
|
|
struct bgpio_chip bgpio;
|
|
};
|
|
|
|
static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
struct sdv_gpio_chip_data *sd = gc->private;
|
|
void __iomem *type_reg;
|
|
u32 reg;
|
|
|
|
if (d->hwirq < 8)
|
|
type_reg = sd->gpio_pub_base + GPIT1R0;
|
|
else
|
|
type_reg = sd->gpio_pub_base + GPIT1R1;
|
|
|
|
reg = readl(type_reg);
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
reg &= ~BIT(4 * (d->hwirq % 8));
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
reg |= BIT(4 * (d->hwirq % 8));
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(reg, type_reg);
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data)
|
|
{
|
|
struct sdv_gpio_chip_data *sd = data;
|
|
u32 irq_stat = readl(sd->gpio_pub_base + GPSTR);
|
|
|
|
irq_stat &= readl(sd->gpio_pub_base + GPIO_INT);
|
|
if (!irq_stat)
|
|
return IRQ_NONE;
|
|
|
|
while (irq_stat) {
|
|
u32 irq_bit = __fls(irq_stat);
|
|
|
|
irq_stat &= ~BIT(irq_bit);
|
|
generic_handle_irq(irq_find_mapping(sd->id, irq_bit));
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sdv_xlate(struct irq_domain *h, struct device_node *node,
|
|
const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq,
|
|
u32 *out_type)
|
|
{
|
|
u32 line, type;
|
|
|
|
if (node != h->of_node)
|
|
return -EINVAL;
|
|
|
|
if (intsize < 2)
|
|
return -EINVAL;
|
|
|
|
line = *intspec;
|
|
*out_hwirq = line;
|
|
|
|
intspec++;
|
|
type = *intspec;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
*out_type = type;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops irq_domain_sdv_ops = {
|
|
.xlate = sdv_xlate,
|
|
};
|
|
|
|
static int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd,
|
|
struct pci_dev *pdev)
|
|
{
|
|
struct irq_chip_type *ct;
|
|
int ret;
|
|
|
|
sd->irq_base = irq_alloc_descs(-1, 0, SDV_NUM_PUB_GPIOS, -1);
|
|
if (sd->irq_base < 0)
|
|
return sd->irq_base;
|
|
|
|
/* mask + ACK all interrupt sources */
|
|
writel(0, sd->gpio_pub_base + GPIO_INT);
|
|
writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR);
|
|
|
|
ret = request_irq(pdev->irq, sdv_gpio_pub_irq_handler, IRQF_SHARED,
|
|
"sdv_gpio", sd);
|
|
if (ret)
|
|
goto out_free_desc;
|
|
|
|
/*
|
|
* This gpio irq controller latches level irqs. Testing shows that if
|
|
* we unmask & ACK the IRQ before the source of the interrupt is gone
|
|
* then the interrupt is active again.
|
|
*/
|
|
sd->gc = irq_alloc_generic_chip("sdv-gpio", 1, sd->irq_base,
|
|
sd->gpio_pub_base, handle_fasteoi_irq);
|
|
if (!sd->gc) {
|
|
ret = -ENOMEM;
|
|
goto out_free_irq;
|
|
}
|
|
|
|
sd->gc->private = sd;
|
|
ct = sd->gc->chip_types;
|
|
ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
|
|
ct->regs.eoi = GPSTR;
|
|
ct->regs.mask = GPIO_INT;
|
|
ct->chip.irq_mask = irq_gc_mask_clr_bit;
|
|
ct->chip.irq_unmask = irq_gc_mask_set_bit;
|
|
ct->chip.irq_eoi = irq_gc_eoi;
|
|
ct->chip.irq_set_type = sdv_gpio_pub_set_type;
|
|
|
|
irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS),
|
|
IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST,
|
|
IRQ_LEVEL | IRQ_NOPROBE);
|
|
|
|
sd->id = irq_domain_add_legacy(pdev->dev.of_node, SDV_NUM_PUB_GPIOS,
|
|
sd->irq_base, 0, &irq_domain_sdv_ops, sd);
|
|
if (!sd->id) {
|
|
ret = -ENODEV;
|
|
goto out_free_irq;
|
|
}
|
|
return 0;
|
|
out_free_irq:
|
|
free_irq(pdev->irq, sd);
|
|
out_free_desc:
|
|
irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS);
|
|
return ret;
|
|
}
|
|
|
|
static int sdv_gpio_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
struct sdv_gpio_chip_data *sd;
|
|
unsigned long addr;
|
|
const void *prop;
|
|
int len;
|
|
int ret;
|
|
u32 mux_val;
|
|
|
|
sd = kzalloc(sizeof(struct sdv_gpio_chip_data), GFP_KERNEL);
|
|
if (!sd)
|
|
return -ENOMEM;
|
|
ret = pci_enable_device(pdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't enable device.\n");
|
|
goto done;
|
|
}
|
|
|
|
ret = pci_request_region(pdev, GPIO_BAR, DRV_NAME);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
|
|
goto disable_pci;
|
|
}
|
|
|
|
addr = pci_resource_start(pdev, GPIO_BAR);
|
|
if (!addr) {
|
|
ret = -ENODEV;
|
|
goto release_reg;
|
|
}
|
|
sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR));
|
|
|
|
prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len);
|
|
if (prop && len == 4) {
|
|
mux_val = of_read_number(prop, 1);
|
|
writel(mux_val, sd->gpio_pub_base + GPMUXCTL);
|
|
}
|
|
|
|
ret = bgpio_init(&sd->bgpio, &pdev->dev, 4,
|
|
sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR,
|
|
NULL, sd->gpio_pub_base + GPOER, NULL, 0);
|
|
if (ret)
|
|
goto unmap;
|
|
sd->bgpio.gc.ngpio = SDV_NUM_PUB_GPIOS;
|
|
|
|
ret = gpiochip_add(&sd->bgpio.gc);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "gpiochip_add() failed.\n");
|
|
goto unmap;
|
|
}
|
|
|
|
ret = sdv_register_irqsupport(sd, pdev);
|
|
if (ret)
|
|
goto unmap;
|
|
|
|
pci_set_drvdata(pdev, sd);
|
|
dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n");
|
|
return 0;
|
|
|
|
unmap:
|
|
iounmap(sd->gpio_pub_base);
|
|
release_reg:
|
|
pci_release_region(pdev, GPIO_BAR);
|
|
disable_pci:
|
|
pci_disable_device(pdev);
|
|
done:
|
|
kfree(sd);
|
|
return ret;
|
|
}
|
|
|
|
static void sdv_gpio_remove(struct pci_dev *pdev)
|
|
{
|
|
struct sdv_gpio_chip_data *sd = pci_get_drvdata(pdev);
|
|
|
|
free_irq(pdev->irq, sd);
|
|
irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS);
|
|
|
|
if (gpiochip_remove(&sd->bgpio.gc))
|
|
dev_err(&pdev->dev, "gpiochip_remove() failed.\n");
|
|
|
|
pci_release_region(pdev, GPIO_BAR);
|
|
iounmap(sd->gpio_pub_base);
|
|
pci_disable_device(pdev);
|
|
kfree(sd);
|
|
}
|
|
|
|
static const struct pci_device_id sdv_gpio_pci_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) },
|
|
{ 0, },
|
|
};
|
|
|
|
static struct pci_driver sdv_gpio_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sdv_gpio_pci_ids,
|
|
.probe = sdv_gpio_probe,
|
|
.remove = sdv_gpio_remove,
|
|
};
|
|
|
|
module_pci_driver(sdv_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Hans J. Koch <hjk@linutronix.de>");
|
|
MODULE_DESCRIPTION("GPIO interface for Intel Sodaville SoCs");
|
|
MODULE_LICENSE("GPL v2");
|