mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 15:43:59 +08:00
fdf0fe2df3
USB PowerShare is a policy which affects charging via the special USB PowerShare port (marked with a small lightning bolt or battery icon) when in low power states: - In S0, the port will always provide power. - In S0ix, if usb_charge is enabled, then power will be supplied to the port when on AC or if battery is > 50%. Else no power is supplied. - In S5, if usb_charge is enabled, then power will be supplied to the port when on AC. Else no power is supplied. Signed-off-by: Daniel Campello <campello@chromium.org> Signed-off-by: Nick Crews <ncrews@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
58 lines
2.3 KiB
Plaintext
58 lines
2.3 KiB
Plaintext
What: /sys/bus/platform/devices/GOOG000C\:00/boot_on_ac
|
|
Date: April 2019
|
|
KernelVersion: 5.3
|
|
Description:
|
|
Boot on AC is a policy which makes the device boot from S5
|
|
when AC power is connected. This is useful for users who
|
|
want to run their device headless or with a dock.
|
|
|
|
Input should be parseable by kstrtou8() to 0 or 1.
|
|
|
|
What: /sys/bus/platform/devices/GOOG000C\:00/build_date
|
|
Date: May 2019
|
|
KernelVersion: 5.3
|
|
Description:
|
|
Display Wilco Embedded Controller firmware build date.
|
|
Output will a MM/DD/YY string.
|
|
|
|
What: /sys/bus/platform/devices/GOOG000C\:00/build_revision
|
|
Date: May 2019
|
|
KernelVersion: 5.3
|
|
Description:
|
|
Display Wilco Embedded Controller build revision.
|
|
Output will a version string be similar to the example below:
|
|
d2592cae0
|
|
|
|
What: /sys/bus/platform/devices/GOOG000C\:00/model_number
|
|
Date: May 2019
|
|
KernelVersion: 5.3
|
|
Description:
|
|
Display Wilco Embedded Controller model number.
|
|
Output will a version string be similar to the example below:
|
|
08B6
|
|
|
|
What: /sys/bus/platform/devices/GOOG000C\:00/usb_charge
|
|
Date: October 2019
|
|
KernelVersion: 5.5
|
|
Description:
|
|
Control the USB PowerShare Policy. USB PowerShare is a policy
|
|
which affects charging via the special USB PowerShare port
|
|
(marked with a small lightning bolt or battery icon) when in
|
|
low power states:
|
|
- In S0, the port will always provide power.
|
|
- In S0ix, if usb_charge is enabled, then power will be
|
|
supplied to the port when on AC or if battery is > 50%.
|
|
Else no power is supplied.
|
|
- In S5, if usb_charge is enabled, then power will be supplied
|
|
to the port when on AC. Else no power is supplied.
|
|
|
|
Input should be either "0" or "1".
|
|
|
|
What: /sys/bus/platform/devices/GOOG000C\:00/version
|
|
Date: May 2019
|
|
KernelVersion: 5.3
|
|
Description:
|
|
Display Wilco Embedded Controller firmware version.
|
|
The format of the string is x.y.z. Where x is major, y is minor
|
|
and z is the build number. For example: 95.00.06
|