Leonard Crestez 1ad9fb750a ARM: dts: imx6sx-sdb: Fix enet phy regulator ... Bindings for "fixed-regulator" only explicitly support "gpio" property, not "gpios". Fix by correcting the property name. The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power cycle, this can be handled by the phy-reset-gpios property. Sadly this is not handled on suspend: the fec driver turns phy-supply off but doesn't assert phy-reset-gpios again on resume. Since additional phy-level work is required to support powering off the phy in suspend fix the problem by just marking the regulator as "boot-on" "always-on" so that it's never turned off. This behavior is equivalent to older releases. Keep the phy-reset-gpios property on fec anyway because it is a correct description of board design. This issue was exposed by commit efdfeb079c ("regulator: fixed: Convert to use GPIO descriptor only") which causes the "gpios" property to also be parsed. Before that commit the "gpios" property had no effect, PHY reset was only handled in the the bootloader. This fixes linux-next boot failures previously reported here: https://lore.kernel.org/patchwork/patch/982437/#1177900 https://lore.kernel.org/patchwork/patch/994091/#1178304 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>		2018-11-05 10:11:04 +08:00
..
bootp
compressed	Devicetree updates for 4.20:	2018-10-26 12:09:58 -07:00
dts	ARM: dts: imx6sx-sdb: Fix enet phy regulator	2018-11-05 10:11:04 +08:00
.gitignore
deflate_xip_data.sh
install.sh
Makefile