2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
linux-next/arch/arm/mach-exynos/cpuidle.c
Linus Torvalds 2bf73dd61a ARM: SoC: late cleanups
These could not be part of the first cleanup branch, because they either
 came too late in the cycle, or they have dependencies on other branches.
 Important changes are:
 
 * The integrator platform is almost multiplatform capable after
   some reorganization (Linus Walleij)
 * Minor cleanups on Zynq (Michal Simek)
 * Lots of changes for Exynos and other Samsung platforms, including
   further preparations for multiplatform support and the clocks bindings
   are rearranged.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/2IGCrR//JCVInAQI+sA//baZOXHTNRR7uBh5PJgaDFIyNjtBDDyyB
 m+yYgw24n3WP1YWtFhBKza7p5Eh2spWYgffKV/logWM4SC3HjkCUsLkQwruHa2qe
 H/pCknUXqUNiwH76WVbfrABb+0tARjEB+U0QfXh7af7Zk+ZXMqQ1/ItU0YdpJiGO
 mOAI5c6gzpr953cmzuHer8foATmF5DNuJPhPDPYlgeg2+yvXgcnfi9a+AXE8Eqb1
 sZeWUJrqJERBlmsVgihq1+gPJjh0Kw7D9r835JqQeKRnywFgvGbmf5kYriPiEEBt
 hJUUnRHW6GCFQM9MemP0nOaRQlQYJA+EPqzB+0YRps0Gq+3QCIXFzZwLije/eMvr
 2YjpITS2MaTqvag1o4yNmfeG+hGMN6MgbOh9q5kLagTXn/9nsQ6aYkD9tCXw4G08
 bH3PP90AT6jQoNDoac5Pt2xPBPvY1JnnUegw5YmQQAlKeSEaiSJnHaC4gD9jzy7q
 fvoXey/Fz/ZgtZKL0wjbjhUrurS45xqZUW0MlMFOt6U7wdG4wsuemaI2PID6tKp8
 ZmZ5gyHsX+CK4GfmhFFu3XhM8hyRj3/OBSy0/Wls3znFH/6j/X1gvrH87gnS9+ax
 +Ettut5uCutDaUJRymXDlqdF9ysLC3DVHpofQPSCqVZ+IHQkUadypyc6YY1Z5mtQ
 x/nxniFA7/A=
 =1i9x
 -----END PGP SIGNATURE-----

Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late cleanups from Arnd Bergmann:
 "These could not be part of the first cleanup branch, because they
  either came too late in the cycle, or they have dependencies on other
  branches.  Important changes are:

   - The integrator platform is almost multiplatform capable after some
     reorganization (Linus Walleij)
   - Minor cleanups on Zynq (Michal Simek)
   - Lots of changes for Exynos and other Samsung platforms, including
     further preparations for multiplatform support and the clocks
     bindings are rearranged"

* tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  devicetree: fix newly added exynos sata bindings
  ARM: EXYNOS: Fix compilation error in cpuidle.c
  ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h
  ARM: EXYNOS: Remove hardware.h file
  ARM: SAMSUNG: Remove hardware.h inclusion
  ARM: S3C24XX: Remove invalid code from hardware.h
  dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock
  ARM: dts: Keep some essential LDOs enabled for arndale-octa board
  ARM: dts: Disable MDMA1 node for arndale-octa board
  ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion
  serial: s3c: Fix build of header without serial_core.h preinclusion
  ARM: EXYNOS: Allow wake-up using GIC interrupts
  ARM: EXYNOS: Stop using legacy Samsung PM code
  ARM: EXYNOS: Remove PM initcalls and useless indirection
  ARM: EXYNOS: Fix abuse of CONFIG_PM
  ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h
  ARM: SAMSUNG: Move common save/restore helpers to separate file
  ARM: SAMSUNG: Move Samsung PM debug code into separate file
  ARM: SAMSUNG: Consolidate PM debug functions
  ARM: SAMSUNG: Use debug_ll_addr() to get UART base address
  ...
2014-04-05 15:46:37 -07:00

257 lines
6.5 KiB
C

/* linux/arch/arm/mach-exynos4/cpuidle.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/time.h>
#include <linux/platform_device.h>
#include <asm/proc-fns.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <asm/unified.h>
#include <asm/cpuidle.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <mach/map.h>
#include "common.h"
#include "regs-pmu.h"
#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
#define S5P_CHECK_AFTR 0xFCBA0D10
#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020)
#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024)
#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28)
#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16)
#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9)
#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8)
#define PWR_CTRL1_USE_CORE1_WFE (1 << 5)
#define PWR_CTRL1_USE_CORE0_WFE (1 << 4)
#define PWR_CTRL1_USE_CORE1_WFI (1 << 1)
#define PWR_CTRL1_USE_CORE0_WFI (1 << 0)
#define PWR_CTRL2_DIV2_UP_EN (1 << 25)
#define PWR_CTRL2_DIV1_UP_EN (1 << 24)
#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16)
#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8)
#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4)
#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0)
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
static struct cpuidle_driver exynos4_idle_driver = {
.name = "exynos4_idle",
.owner = THIS_MODULE,
.states = {
[0] = ARM_CPUIDLE_WFI_STATE,
[1] = {
.enter = exynos4_enter_lowpower,
.exit_latency = 300,
.target_residency = 100000,
.flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C1",
.desc = "ARM power down",
},
},
.state_count = 2,
.safe_state_index = 0,
};
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos4_set_wakeupmask(void)
{
__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
}
static unsigned int g_pwr_ctrl, g_diag_reg;
static void save_cpu_arch_register(void)
{
/*read power control register*/
asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
/*read diagnostic register*/
asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
return;
}
static void restore_cpu_arch_register(void)
{
/*write power control register*/
asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
/*write diagnostic register*/
asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
return;
}
static int idle_finisher(unsigned long flags)
{
cpu_do_idle();
return 1;
}
static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
unsigned long tmp;
exynos4_set_wakeupmask();
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
__raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR);
__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
save_cpu_arch_register();
/* Setting Central Sequence Register for power down mode */
tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
cpu_pm_enter();
cpu_suspend(0, idle_finisher);
#ifdef CONFIG_SMP
if (!soc_is_exynos5250())
scu_enable(S5P_VA_SCU);
#endif
cpu_pm_exit();
restore_cpu_arch_register();
/*
* If PMU failed while entering sleep mode, WFI will be
* ignored by PMU and then exiting cpu_do_idle().
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
* in this situation.
*/
tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
tmp |= S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
}
/* Clear wakeup state register */
__raw_writel(0x0, S5P_WAKEUP_STAT);
return index;
}
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
int new_index = index;
/* AFTR can only be entered when cores other than CPU0 are offline */
if (num_online_cpus() > 1 || dev->cpu != 0)
new_index = drv->safe_state_index;
if (new_index == 0)
return arm_cpuidle_simple_enter(dev, drv, new_index);
else
return exynos4_enter_core0_aftr(dev, drv, new_index);
}
static void __init exynos5_core_down_clk(void)
{
unsigned int tmp;
/*
* Enable arm clock down (in idle) and set arm divider
* ratios in WFI/WFE state.
*/
tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
PWR_CTRL1_CORE1_DOWN_RATIO | \
PWR_CTRL1_DIV2_DOWN_EN | \
PWR_CTRL1_DIV1_DOWN_EN | \
PWR_CTRL1_USE_CORE1_WFE | \
PWR_CTRL1_USE_CORE0_WFE | \
PWR_CTRL1_USE_CORE1_WFI | \
PWR_CTRL1_USE_CORE0_WFI;
__raw_writel(tmp, EXYNOS5_PWR_CTRL1);
/*
* Enable arm clock up (on exiting idle). Set arm divider
* ratios when not in idle along with the standby duration
* ratios.
*/
tmp = PWR_CTRL2_DIV2_UP_EN | \
PWR_CTRL2_DIV1_UP_EN | \
PWR_CTRL2_DUR_STANDBY2_VAL | \
PWR_CTRL2_DUR_STANDBY1_VAL | \
PWR_CTRL2_CORE2_UP_RATIO | \
PWR_CTRL2_CORE1_UP_RATIO;
__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
}
static int exynos_cpuidle_probe(struct platform_device *pdev)
{
int cpu_id, ret;
struct cpuidle_device *device;
if (soc_is_exynos5250())
exynos5_core_down_clk();
if (soc_is_exynos5440())
exynos4_idle_driver.state_count = 1;
ret = cpuidle_register_driver(&exynos4_idle_driver);
if (ret) {
dev_err(&pdev->dev, "failed to register cpuidle driver\n");
return ret;
}
for_each_online_cpu(cpu_id) {
device = &per_cpu(exynos4_cpuidle_device, cpu_id);
device->cpu = cpu_id;
ret = cpuidle_register_device(device);
if (ret) {
dev_err(&pdev->dev, "failed to register cpuidle device\n");
return ret;
}
}
return 0;
}
static struct platform_driver exynos_cpuidle_driver = {
.probe = exynos_cpuidle_probe,
.driver = {
.name = "exynos_cpuidle",
.owner = THIS_MODULE,
},
};
module_platform_driver(exynos_cpuidle_driver);